Você está na página 1de 7

Chain Products

Experience
Matters.
Scaw Vision Statement Contents

Introduction 4

Product Range 5

Scaw Metals Group Quality System 8

A South African led, globally competitive and Certifications 9


responsible beneficiator of key raw materials into niche,
high-value steel products. Chain Applications 10

2 3
Introduction Products Range

McKinnon Chain Chain range of products:

McKinnon Chain is a division of the Scaw Metals Group. Grade 3

Manufacturers of the McKinnon and Max-Alloy brands of chain is Mckinnon Gr3 Long Link Chain to Sans 251
situated in Vereeniging, Gauteng,South Africa. Its chain factory is Long Link chain is a general purpose mild steel chain.
among the largest and most modern chain products factories in the Factor of Safety: 5 to 1.
world and includes a forging plant.
McKinnon Gr3 Extra Long Link Chain to SANS 251
The McKinnon Chain operation has been servicing the needs of Extra Long Link Chain was primarily developed for use in underground mining but now offers greater versatility due
both local and overseas customers since 1935. The company to its passing-through design allowing immediate, on site, coupling and repair.
manufactures a wide range of round link welded chain in order to Factor of Safety: 5 to 1.
meet the needs of their many and varied customers in the mining,
industrial, manufacturing, construction, steel, marine, offshore oil Special Short Link Chain to SANS 189
and sugar industries. Special Short Link Chain is a high quality carbon-steel chain for general purpose use.
Factor of Safety: 5 to 1.
McKinnon Chain products are manufactured to national and
international standards in sizes ranging from 3mm to 70mm diameter Hardware Mid Link Chain/ Merchandizer Chain
and grades from 3 to 10. Zinc-plated general purpose Utility Chain ideal for most D.I.Y. and general uses.
Available in sizes 3,0mm to 10,0mm, supplied in measured 30m lengths.

Grade 4

McKinnon Certified Transport Chain McK CTC to SANS 189


McK CTC is the trusted brand name for transport lashing systems.

Grade 5

Short Link Gr5 Chain to SANS 189


Grade 5 Short Link Chain is specially hardened and tempered to achieve higher working load limits and increased
wearing properties.
Factor of Safety: 4 to 1.

Grade 6

Super 6 Short Link Chain to SANS 189


Short Link Chain is a special steel chain developed for those rugged applications demanding high resistance to both
abrasion and shock loads.

Short Link Chain is ideally suited for Cane and Timber Bundling Chains. McK Super 6 conforms to SANS 189.

Grade 8

Grade 8 Log Haul conveyor chain


Log Haul Chain is a calibrated, hardened and tempered alloy steel conveyor chain developed originally for the
Timber industry but also used for various other conveyor applications.

4 5

4
Products Range Products Range

Max-Alloy Gr 8 Alloy Chain (McK 8) Chain Fittings


Max-Alloy is a heat-treated alloy steel chain specifically developed and McKinnon Chain is the exclusive distributor of Yoke Industrial Corp grade 80 and grade 100 chain fittings in
manufactured for use in chain slings for lifting purposes. Possessing Sub-Saharan Africa.
superior properties and high tensile strength, it is also used in many other
applications requiring highest quality chains. All the sizes from 6,0mm to Yoke Industrial Corp Taiwan is an ISO 9001 certified company and has Type Approval by the major international
32,0mm are manufactured to Grade 800 standards with a mean stress of authorities from SABS, ZU, ABS, API and DNV. Yoke runs a constant strict production facility with quality control in
800 MPa at specified minimum breaking force. Conforms to SANS 189 every manufacturing stage from raw material to the completed product.
and EN 818.

D
Grade 10
B
Max-Alloy Gr 10 Alloy Chain
F
McK 10 is an alloy steel grade of chain specifically heat treated to safely
work at 25% higher working load limits than Max-Alloy grade 8 chain. It
conforms mechanically to EN 818/ SANS 189 plus 25%. Conforms
dimensionally to EN 818 as well as SANS 189. E

Available in sizes ranging from 6mm to 22mm diameter.

Max-Alloy Gr 10 PAS Chain


Chain solutions
McK 10PAS is a triple alloy steel grade of chain specifically heat
treated to perform in environments up to temperatures of 400 Celcius In addition to the extensive range of chain grades listed above, McKinnon Chain also offers
8-203 chain
Hoist and chain related
Ring
without any derating. solutions to numerous industries. We offer chain solutions for the following industries:

Max-Alloy Gr 10 Load Chain Marine and Aquaculture - Trawlink chain solutions


Agriculture & Forestry - Timber bundling and Maksa Trek Chains systems
McK Load 10 is an alloy steel grade of chain specifically engineered for Sugar Industry - Sugar Cane bundling systems including our quick release GRIP TRIP solution
manual and air hoists. These chains complies with SABS 1592:1983. Transport Industry - Cargo securement chain & attachments
Offshore, oil and gas - Fully welded DNV TYPE APPROVED slings, DNV Masterlinks and Sub-assemblies.
Max-Alloy Super 10 Mining Industry - Rigging, Pipe securement, Kibble chain assemblies and conveyor systems.

Heat treated chain specifically for forestry and the sugar industry. (NB. See loose leaf inserts for product details and specifications.)
Highly recommended for transport/ load lashing on vehicles.

6 7
Quality System Certifications

SANS/ISO 9001 (listing number LS0060)

Det Norske Veritas DNV

Norddeutsce Metall Berufsgenossenschaft - H46

SABS MARKS HELD:

SANS 189:1993
Short link steel chain (medium tolerance) for
lifting purposes

SANS 1592:1993
Short link steel chain (close tolerance) for
lifting appliances

SANS 251:1993
Long link and extra long link steel chains for
general purposes

SANS 1595:1993
Forged steel lifting hooks with Pin and eye for use
with steel chain of strength grade M(3), P(5), S(6),
T(8) and V(10) Gr 8 Certificate H-Mark Certificate

SANS/ISO 8539:1986
Forged steel lifting components for use with
grade T(8) chain

SANS/ISO 7593:1986
Chain sling assembled by methods other than
welding Grade T(8)

SANS/ISO 4778:1981
Chain slings of welded construction grade M(4),
S(6) AND T(8)

SABS IS0 9001:2008 DNV Type Approval Certificates

8 9
Chain Applications

Please visit our website, www.mckinnonchain.com, for


more details on any product listed above. Register your
details on the website to receive updates on new product
developments, Monthly special offers and our world class
training course.

10
Scaw Metals Group
161A Ring Road
Duncanville
Vereeninging
Gauteng
South Africa

Tel: +27 (0) 16 428 6000

Fax: +27 (0) 16 428 1089

Email: chainsec@scaw.co.za

www.mckinnonchain.com
www.scaw.co.za
072014

Você também pode gostar