Escolar Documentos
Profissional Documentos
Cultura Documentos
ISSN 2229-5518
Abstract This paper aims the development of high-energy milling equipment for use in powder metallurgy. This kind of mill is used to
obtain prealloyed powders and/or reduction size of powder particles. After the steps of project and the construction, a preliminary test was
performed using sand in a percentage of 2:1 with stainless steel balls. The result of test show that the average diameter distribution of sand
particles has reduced approximately 50%.
Index Terms High-energy milling, Mechanical alloying, Particle reduction size, Powder metallurgy,
1 INTRODUCTION
2.2 Assembly
The mechanical assembly of components designed was held
in a company specialized in the assembly of metal structures
(machining and welding). The figure 2 shows the mill during
assembly of parts and figure 3 shows details of the camera
cover, where shows the gas seal connectors and shaft connec- Fig. 4. Final assembly with variable-frequency drive.
tion.
IJSER 2016
http://www.ijser.org
International Journal of Scientific & Engineering Research Volume 7, Issue 8, August-2016
ISSN 2229-5518
TABLE 1
PARTICLE SIZE ANALYSIS BY SIEVING - BEFORE MILLING
IJSER 2016
http://www.ijser.org
International Journal of Scientific & Engineering Research Volume 7, Issue 8, August-2016
ISSN 2229-5518
REFERENCES
[1] Moro, N. (2014) Metalurgia do p. Available at: http://norb-
ertocefetsc.pro.br/elm/wp-content/uploads/2014/09/metalurgiadopo.pdf
(20 Apr 2016)
[2] Leandro Pelegrini (2012). Influncia do tempo de moagem por me-
cno-sintese nas propriedades da liga magntica Fe-3%Si-0,75%P apli-
cada em ncleo de mquinas eltricas. Master in Mining, Metallurgi-
cal and Materials Engineering. Federal University of Rio Grande do
Sul.
[3] Lall, C., Baum, L. W. (1988) High Performance Soft Magnetic Compo-
nents by Powder Metallurgy and Metal Injection Molding, Modern
Developments in Powder Metallurgy. Orlando, Florida 01 Jul 1988.
Princeton, New Jersey: Metal Powder Industries Federation, 832.
[4] Lenel, F. V. (1984) Magnetic Applications. Metals Handbook, 7, 638-641.
[5] Bas, J. A., Puig, J., Molins, C. B. (1998) Soft Magnetic Materials in Pow-
der Metallurgy: Current Applications and State of the Art. Modern
Developments in Powder Metallurgy. Orlando, Florida 01 Jul 1988.
Princeton, New Jersey: Metal Powder Industries Federation, 832.
[6] Bal, P. (2008) Mechanochemistry in Nanoscience and Minerals En-
gineering. 1st ed. Koice: Springer Berlin Heidelberg.
[7] Chiaverini, V. (2001) Metalurgia do p. 4th ed. So Paulo: ABM.
[8] Coelho, R. E., Silva, M. C. A., Ambrozio, F. (2006) Estudo de Ligas Ti-
Ni Processadas por Moagem de Alta Energia Seguidas de Conforma-
o a Quente Sob Vcuo, 17 CBECIMat - Congresso Brasileiro de En-
genharia e Cincia dos Materiais. Foz do Iguau, Paran. 15-19 Nov
2006.
[9] Chicinas, I., Pop, V., Isnard, O. (2004) Synthesis of the Supermalloy
Powders by Mechanical Alloying, Journal of Materials Science [Inter-
net], 39 (16), 53055309. Available from: http://link.springer.com/ar
ticle/10.1023/B%3AJMSC.0000039234.58490.78 [ 22 Apr 2016].
[10] Suryanarayana, C. (2001) Mechanical alloying and milling, Progress
in Materials Science [Internet], 46 (1-2), 1-184. Available from:
http://www.sciencedirect.com/science/article/pii/S0079642599000
109 [18 Aug 2016].
Monir Gethel Borba is currently pursuing doctorate degree program
in Mining, Metallurgical and Materials Engineering in Federal University
of Rio Grande do Sul, Brazil. E-mail: Monir.borba@ufrgs.br
Moiss de Mattos Dias is professor at Feevale University, Brazil. E-mail:
moisesdias@feevale.br
Andr Carvalho Tavares is currently pursuing doctorate degree program
in Mining, Metallurgical and Materials Engineering in Federal University
of Rio Grande do Sul, Brazil. E-mail: andre.tavares@ufrgs.br
Diego Pacheco Wermuth is currently pursuing doctorate degree program
in Mining, Metallurgical and Materials Engineering in Federal University
of Rio Grande do Sul, Brazil. E-mail: diego.wermuth@ufrgs.br
Vinicius Martins is professor at Instituto Federal de Educao, Cincia e
Tecnologia Sul-rio-grandense, Brazil. E-mail: viniciushiper@yahoo.com.br
Felipe Guimares Ramos is professor at UniRitter University, Brazil. E-
mail: felipe_ramos@uniritter.edu.br
Ramon Fernando Hans is professor at Feevale University, Brazil. E-mail:
ramonhans@feevale.br;
Eduardo Luis Schneider is professor at Feevale University, Brazil. E-mail:
eduardoluis@feevale.br
Lrio Schaeffer is professor at Federal University of Rio Grande do Sul,
Brazil. E-mail: schaefer@ufrgs.br
IJSER 2016
http://www.ijser.org