Escolar Documentos
Profissional Documentos
Cultura Documentos
USB CONNECTOR
Features:
Colour: dark grey RAL 7016
Output voltage: 5 VDC
Max. current supply: 0.5 A
Small compact size (65 x 63 x 29 mm)
USB device according to standard for USB chargers
Options:
Exchangeable motor cable, available in several
lengths
Usage:
Compatible with the TD33 or the CBH Advanced
system
2 ways of mounting: either by the use of screws
OR via the groove on the TD3
Can be stacked either with more USB CONNECTORs
OR with a DC CONNECTOR and a LED LIGHTBOX
Ambient temperature: +5 C to +40 C
Storage and transportation temperature:
-10 C to +70 C
Will be approved according to EN 60335-1 with
TD33
EMC approval according to EN 55014-1 /
EN 55014-2
30
LED Lightbox
63
DC Connector
29
65
USB Connector
8.1
Ordering numbers:
USB CONNECTOR:
USBCONNECTOR001
An energy saving busbar and via this busbar a standard 230 V lamp can be connected. The lamp can then be turned on
and off via the standard HB20 handset
Standard lamp
Energy saving
busbar
Charge your mobile telephone. Connect your telephone via the telephone USB cable to the USB CONNECTOR and it will
start charging according to the standard for USB chargers
A PC accessory with a USB plug like light, a small fan etc. The only demand is that the accessory is in accordance with
existing specifications (5 V output, max draw 0.5 A etc.) and that it does not require communication.
System operation:
As standard the TD3/CBH Advanced is set up to work with the LED LIGHTBOX001, meaning that when you connect the USB
CONNECTOR001 and the chosen USB unit, the system must be configured.
Mounting instructions:
Either slide the USBCONNECTOR001 on the groove on the TD3 or mount the unit on the bed frame using 3 wood screws
with a maximum head diameter of 8 mm. Max. Torque 1 Nm.
All cables must be fixed to the bed to avoid disconnection when cleaning under the bed.
To operate the USBCONNECTOR with a standard handset the TD3 needs to be configured.
Copyright LINAK 2014.10 . MA M9-02-344-B . Chapter 10.25
Terms of use
The user is responsible for determining the suitability of LINAK products for specific application.
LINAK takes great care in providing accurate and up-to-date information on its products.
However, due to continuous development in order to improve its products, LINAK products are
subject to frequent modifications and changes without prior notice. Therefore, LINAK cannot
guarantee the correct and actual status of said information on its products.
While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons as
mentioned above, guarantee the availability of any particular product. Therefore, LINAK reserves
the right to discontinue the sale of any product displayed on its website or listed in its catalogues
or other written material drawn up by LINAK.
All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof,
please contact LINAK.
FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USERS MANUALS