per ISO11666 Level for Technique 1 and 3 for Thickness 8mm to 15 mm (Acceptance Level 2) 1. Reference Level should be 0db (DAC) as denoted with 1 in sketch
2. Evaluation Level should be reference level-14db as denoted with4
in sketch
3. Recording Level (Denoted with 3 in sketch)
If length of indication is equal to or less than 1 time of thickness of parent metal then recording Level should be reference level -8db If length of indication is greater than thickness of parent metal then recording Level should be reference level -14db
4. Acceptance Level (Denoted with 2 in sketch)
If length of indication equal to or less than 1 time of thickness of parent metal then acceptance Level should be reference level -4db If length of indication is greater than thickness of parent metal then acceptance Level should be reference level -10db .
Level for Technique 1 and 3 for Thickness 8mm to
15 mm (Acceptance Level 3) 1. Reference Level should be 0db (DAC) as denoted with 1 in sketch
2. Evaluation Level should be reference level-10db as denoted with
4 in sketch
3. Recording Level (Denoted with 3 in sketch)
If length of indication is equal to or less than 1 time of thickness of parent metal then recording Level should be reference level -4db If length of indication is more than thickness of parent metal then recording Level should be reference level -10db
4. Acceptance Level (Denoted with 2 in sketch)
If length of indication is equal to less than 1 time of thickness of parent metal then acceptance Level should be reference level 0db If length of indication is greater than thickness of parent metal then acceptance Level should be reference level -6db .
Level for Technique 1 for Thickness 15mm to 100
mm (Acceptance Level 2) 1. Reference Level should be 0db (DAC) as denoted with 1 in sketch 2. Evaluation Level should be reference level-14db as denoted with 4 in sketch
3. Recording Level (Denoted with 3 in sketch)
If length of indication is equal or less than 1/2 of thickness of parent metal then recording Level should be reference level -4db If length of indication is greater than1/2 thickness and equal to or less than thickness of parent metal then recording Level should be reference level-10db If length of indication is greater than thickness of parent metal then recording Level should be reference level -14db
4. Acceptance Level (Denoted with 2 in sketch)
If length of indication is equal to or less than 1/2 of thickness of parent metal then acceptance Level should be reference level 0db If length of indication is greater than1/2 thickness and equal to or less than thickness of parent metal then acceptance Level should be reference level -6db If length of indication is greater than thickness of parent metal then acceptance Level should be reference level -10db
Level for Technique 1 for Thickness 15mm to 100
mm (Acceptance Level 3) 1. Reference Level should be 0db (DAC) as denoted with 1 in sketch
2. Evaluation Level should be reference level-10db as denoted with4
in sketch 3. Recording Level (Denoted with 3in sketch) If length of indication is equal or less than 1/2 of thickness of parent metal then recording Level should be reference level 0db If length of indication is greater than1/2 thickness and equal to or less than thickness of parent metal then recording Level should be reference level-6db If length of indication is greater than thickness of parent metal then recording Level should be reference level -10db
4. Acceptance Level (Denoted with2 in sketch)
If length of indication is equal to or less than 1/2 of thickness of parent metal then acceptance Level should be reference level +4db If length of indication is greater than1/2 thickness and equal to or less than thickness of parent metal then acceptance Level should be reference level -2db If length of indication is greater than thickness of parent metal then acceptance Level should be reference level -6db