Escolar Documentos
Profissional Documentos
Cultura Documentos
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Correct Answer is. a 250 volt megger. Explanation. Jeppesen A&P Airframe Textbook
Explanation. CAAIP S Leaflet 9-1, 4.4.2 As a rule Fig.2-47.
2(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
heated.
Correct Answer is. ream holes of different
Question Number. 17. The pitch of a diameters by adjusting the position of the blades.
hacksaw blade is.
Option A. its length. Explanation. Jeppesen A&P Technician General
Option B. the number of teeth on the blade. Textbook Page 9-19.
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Correct Answer is. 0.5 mm. Explanation. Jeppesen A&P General Textbook 9-
Explanation. NIL. 36.
4(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available
Question Number. 25. When torque Question Number. 29. The vernier scale
loading, a wrench should be selected where the on an English caliper is divided into.
required value falls. Option A. 50 equal divisions.
Option A. at the top end of the range. Option B. 40 equal divisions.
Option B. in the middle of the range. Option C. 25 equal divisions.
Option C. at the bottom end of the range. Correct Answer is. 25 equal divisions.
Correct Answer is. at the top end of the Explanation. Jeppesen A&P General Textbook 9-
range. 36.
Explanation. CAIP S BL/6-30 4.5.1.
Explanation. CAIP EEL/1-6 4.2.1 & CAAIP S Question Number. 31. The measuring
Leaflet 9-1 4.2.1. capacity of a Vernier Caliper is.
Option A. the length of the graduated scale
less the length of the vernier scale.
Question Number. 27. If all three prongs Option B. the length of the graduated scale.
on a bonding tester were shorted together, the
metre would read. Option C. the length of the graduated scale
Option A. FSD. plus the width of the nibs.
Option B. zero. Correct Answer is. the length of the
Option C. off-scale high. graduated scale less the length of the vernier scale.
Correct Answer is. zero.
Explanation. CAIP EEL/1-6 3.10.2b. Explanation. NIL.
Question Number. 28. The pitch of the Question Number. 32. Vee-blocks are
screw thread on an English micrometer is. manufactured.
Option A. as single items and may be paired
Option A. 0.0001 inches. with any other vee-block.
Option B. 0.050 inches. Option B. in sets of two and identified for
Option C. 0.025 inches. use as a set.
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Option C. in sets of three and identified for Question Number. 36. Cross cut files.
use as a set.
5(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available
Correct Answer is. in sets of two and Option A. cut on the backward stroke only.
identified for use as a set.
Explanation. NIL. Option B. cut in both directions.
Option C. cut on the forward stroke only.
Correct Answer is. cut on the forward stroke
Question Number. 33. The metric only.
micrometer reading shown is. Explanation. NIL.
Option A. 13.87 mm.
Option B. 13.37 mm.
Option C. 10.337 mm. Question Number. 37. The correct size
Correct Answer is. 13.37 mm. spanner for use on a unified 5/16 in. threaded
Explanation. NIL. hexagon headed bolt is.
Option A. 5/16 in A/F.
Option B. 1/2 in A/F.
Question Number. 34. A ketts saw is used Option C. 1/4 in A/F.
because. Correct Answer is. 1/2 in A/F.
Option A. it can cut thicker metal than is Explanation. NIL.
required by most repair schemes.
Option B. it is available both pneumatic and
electric. Question Number. 38. The length of the
Option C. its low torque allows single Vernier Scale in a 24/25 Vernier Caliper is.
handed use.
Correct Answer is. it can cut thicker metal Option A. 0.6 in.
than is required by most repair schemes. Option B. 1.2 in.
Explanation. Jeppesen A&P Airframe Textbook. Option C. 2.45 in.
It describes it as electrical, with the advantage of Correct Answer is. 0.6 in.
being able to cut sheet to 3/16 inch thick. Care to Explanation. NIL.
be taken to prevent blade from 'grabbing and
kicking back'.
Question Number. 39. What is used to
measure the depth of a blend after a corrosion
Question Number. 35. The gears used in repair?.
a pistol windy are. Option A. Dial Test Indicator.
Option A. gears in a gearbox. Option B. Straight edge and slip gauges.
Option B. gyrator type gears. Option C. Vernier caliper.
Option C. spur gears. Correct Answer is. Dial Test Indicator.
Correct Answer is. spur gears. Explanation. AL/7-14 Page 12. BL/4-20 Page 9.
Explanation. Sun and planet gear reduction,
using spur gears.
Question Number. 40. Vacu-blast beads
re-used on a steel component, after being used on
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Option A. cause clogging of the vacu-blast Question Number. 44. The depth
machine. micrometer reading shown is.
6(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Question Number. 48. The length of the Question Number. 52. What is the
legs. purpose of Target Points on a Vernier caliper?.
7(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available
Explanation. NIL.
Question Number. 50. Why is the Vee cut
in the base of a scribing block?.
Option A. to reduce the contact area with Question Number. 54. A Dial Test
the marking off table and reduce friction. Indicator may be used for.
Option B. to allow the scribing block to be Option A. checking a round bar for bow.
used on the edge of the marking off table. Option B. checking dimensions to within
Option C. to trap any dirt that may be 0.125''.
adhering to the surface of the marking off table. Option C. checking any known depth.
Correct Answer is. to trap any dirt that may Correct Answer is. checking a round bar for
be adhering to the surface of the marking off table. bow.
Explanation. EL/3-3 fig 1.
Explanation. NIL.
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Option A. To cut thin mild steel plate use a Correct Answer is. in series with the circuit.
coarse blade.
8(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Question Number. 66. Which electrical Question Number. 70. Three point
measuring device needs a power source?. micrometers are for measuring.
Option A. internal dimensions.
Option A. A voltmeter. Option B. external dimensions.
Option B. An ohmmeter. Option C. linear dimensions.
Option C. An ammeter. Correct Answer is. internal dimensions.
Correct Answer is. An ohmmeter. Explanation. BL/3-5 3.4.
Explanation. Aircraft Electricity and Electronics.
Eismin 5th Edition page 165.
Question Number. 71. When is a coarse
hacksaw blade used?.
Question Number. 67. When measuring Option A. When cutting material of thick
voltage or current with a digital multimeter, the cross section.
indication is. Option B. When cutting ferrous metals only.
Option A. Average values.
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Correct Answer is. When cutting material of the included angle of a twist drill for hard metal?.
thick cross section.
Explanation. Jeppesen A&P General Technician Option A. 90 degrees.
Textbook Page 9-13. Option B. 100 degrees.
Option C. 118 degrees.
Correct Answer is. 118 degrees.
Question Number. 72. A voltage drop Explanation. Jeppesen A&P Airframe Technician
across a component is measured by placing the Textbook Page 2-27.
meter in.
Option A. parallel with the component.
Option B. series with he component. Question Number. 76. The threads per
Option C. series with the power source. inch on the spindle of an English micrometer are.
Correct Answer is. parallel with the
component. Option A. 40 t.p.i.
Explanation. Aircraft Electricity and Electronics. Option B. 50 t.p.i.
Eismin 5th Edition page 164 and CAAIP S Leaflet 9- Option C. 25 t.p.i.
1, 4.3. Correct Answer is. 40 t.p.i.
Explanation. BL/3-5 4.1.
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
the moving scale on the Vernier caliper is. Question Number. 83. How are files
classified?.
Option A. the main scale. Option A. By length, grade and material.
Option B. the vernier scale. Option B. By length, grade, cut and section.
Option C. the cursor.
Correct Answer is. the vernier scale. Option C. By length, grade, cut, section and
Explanation. BL/3-4 fig 2 (although the whole material.
moving frame - which has the scale - is called the Correct Answer is. By length, grade, cut and
cursor). section.
Explanation. NIL.
Explanation. NIL.
Question Number. 81. What does the cut
of a file refer to?.
Option A. Arrangement of the teeth. Question Number. 85. What does the
Option B. Number of teeth per inch. term 'second cut' indicate as applied to hand files?.
Option C. Grade.
Correct Answer is. Arrangement of the teeth. Option A. The grade of the file.
Option B. The section of the file.
Explanation. A&P Technician Airframe Textbook Option C. A reconditioned file.
Page 220. Correct Answer is. The grade of the file.
Explanation. NIL.
Explanation. NIL.
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Question Number. 89. When tapping Correct Answer is. millimetres and half
blind holes. millimetres.
Option A. a set of three taps is used. Explanation. BL/3-4 2.5.1
Option B. a set of two taps is used.
Option C. a single tap is used.
Correct Answer is. a set of three taps is used. Question Number. 93. For a drill to cut
properly it is essential that the point angle be the
Explanation. NIL. same on each side, for general use the angle is.
Option A. 12.
Question Number. 90. On a torque Option B. 130.
wrench the torque loading is. Option C. 59.
Option A. the tangential application of the Correct Answer is. 59.
force divided by the perpendicular distance to the Explanation. Jeppesen A & P Technician
centre of the bolt. Airframe page 2-27.
Option B. the tangential application of the
force times the perpendicular distance to the
centre of the bolt. Question Number. 94. The pitch of a
Option C. the tangential application of the hacksaw blade is.
force plus the perpendicular distance to the centre Option A. the number of teeth per inch.
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Option C. the number of teeth on the blade. Correct Answer is. the vernier caliper.
Explanation. BL/3-4 4.
13(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Option B. Measure the resistance with an Option C. A new lead may be manufactured
ohmmeter. using the correct current rated cable.
14(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available
Option C. Measure the resistance with a 250 Correct Answer is. The damaged leads and
volt megger. the tester should be returned to the manufacturer
Correct Answer is. Measure the millivolt drop for repair and calibration.
across the connection with a millivolt meter. Explanation. Leaflet 9-1 3.1.1. & EEL/1-6 Para
Explanation. EEL/1-6 4.3. 3.11.2.
Question Number. 103. How would you Question Number. 106. When carrying out
measure continuity of a coaxial cable?. a continuity test on a circuit when a known
Option A. With a safety ohmmeter. resistance exists, what instrument would you use?.
Option B. With a reflectometer.
Option C. With a 250 volt megger. Option A. A lamp and battery.
Correct Answer is. With a reflectometer. Option B. A high resistance insulation tester.
Explanation. Other versions of this question say
Time Domain Reflectometer, or Time Delay Option C. A multimeter.
Reflectometer. Correct Answer is. A multimeter.
Explanation. NIL.
circuit.
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Option B. check battery electrolyte density. Correct Answer is. is rectified and measures
average value.
16(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Option A. 65 degrees.
Question Number. 125. The internal Option B. 30 degrees.
resistance of a voltmeter is. Option C. 55 degrees.
Option A. no more than 0.05 ohms. Correct Answer is. 30 degrees.
Option B. low. Explanation. NIL.
Option C. high.
Correct Answer is. high.
Explanation. Aircraft Electricity and Electronics. Question Number. 130. A mill file can be
Eismin 5th Edition page 164. used for.
Option A. corners less than 60 degrees.
Option B. saw sharpening.
Question Number. 126. The internal Option C. general purpose.
resistance of an ammeter is. Correct Answer is. saw sharpening.
Option A. low. Explanation. External document.
Option B. 1 ohm. http://www.rockler.com/tech/12369.pdf
Option C. high.
Correct Answer is. low.
Explanation. Aircraft Electricity and Electronics. Question Number. 131. A rawhide mallet
Eismin 5th Edition page 162. is.
Option A. available with copper inserts.
Option B. less expensive than bossing mallet.
Question Number. 127. A drill bit of 0.250
inch would be. Option C. used for giving softer blows than
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
Question Number. 135. To carry out a Question Number. 139. The forces acting
continuity test you would use. on a meter which moves the pointer over the scale
Option A. ammeter. is called.
Option B. an HT circuit tester. Option A. the controlling force.
Option C. a low reading ohmmeter. Option B. the turning force.
Correct Answer is. a low reading ohmmeter. Option C. the deflecting force.
Correct Answer is. the deflecting force.
Page
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM
WWW.DGCAQUESTIONPAPERS.IN - DGCA CAR -66 MODULE 7 PART -2
Visit to download all latest EASA / DGCA CAR 66 Module examination Question papers and study material
19(www.dgcaquestionpapers.in), Like us on Facebook @ fb/DGCAQuestionPapers ( All CAR 66 Module Exam QP Available
DOWNLOAD OUR MOBILE APP FROM PLAY STORE @DGCA QUESTION PAPERS
IF YOU HAVE PREVIOUS SESSION QUESTION PAPERS, SHARE WITH US AT AVIATORSLINKS@GMAIL.COM