Escolar Documentos
Profissional Documentos
Cultura Documentos
W-CDMA
W-CDMA
ALCATEL-LUCENT CONFIDENTIAL
UNCONTROLLED COPY: The master of this document is stored on an electronic database and is write
protected; it may be altered only by authorized persons. While copies may be printed, it is not recommended.
Viewing of the master electronically ensures access to the current issue. Any hardcopies taken must be
regarded as uncontrolled copies.
ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property of Alcatel-Lucent.
Except as expressly authorized in writing by Alcatel-Lucent, the holder shall keep all information contained
herein confidential, shall disclose the information only to its employees with a need to know, and shall protect
the information from disclosure and dissemination to third parties. Except as expressly authorized in writing by
Alcatel-Lucent, the holder is granted no rights to use the information contained herein. If you have received
this document in error, please notify the sender and destroy it immediately.
PUBLICATION HISTORY
SYSTEM RELEASE: OAM07.1
March 2010
Issue 03.12 /EN, Preliminary
March 2010
Issue 03.11 /EN, Preliminary
Update for 7.11.3.0 release
February 2010
Issue 03.10 /EN, Preliminary
February 2010
Issue 03.09 /EN, Preliminary
January 2010
Issue 03.08 /EN, Preliminary
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential Publication history ii
November 2009
Issue 03.07 /EN, Preliminary
November 2009
Issue 03.06 /EN, Preliminary
October 2009
Issue 03.05 /EN, Preliminary
Update for 7.1.9.44 release
September 2009
Issue 03.04 /EN, Preliminary
September 2009
Issue 03.03 /EN, Preliminary
Update for 7.1.9.38 release
Reference about Report files folder option is added.
July 2009
Issue 03.02/ EN, Preliminary
Updated in accordance with CRi 00178394.01
Update for 7.1.9.33 release
July 2009
Issue 03.01/ EN, Preliminary
Message View was changed Channel column was replaced by Source,
Protocol, Direction columns
Message Parsing Window (KPI) was changed Function and Channel Type
columns were replaced by Source, Protocol columns. Displayed Name column
was renamed into Message Name
July 2009
Issue 03.00/ EN, Preliminary
Creation for OAM 7.1 release
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential Table of content v
TABLE OF CONTENTS
1. INTRODUCTION ................................................................................................1
1.1. SUBJECT ..................................................................................................................................1
1.2. SCOPE OF THIS DOCUMENT......................................................................................................1
1.3. AUDIENCE FOR THIS DOCUMENT ...............................................................................................1
3. OVERVIEW ......................................................................................................3
3.1. MAIN W INDOW..........................................................................................................................4
3.2. MAIN MENU ..............................................................................................................................6
3.3. BASIC USAGE PROCEDURE .......................................................................................................8
4. CONFIGURATION............................................................................................. 10
4.1. LICENSING..............................................................................................................................10
4.2. OPTIONS ................................................................................................................................15
4.3. SETTINGS...............................................................................................................................18
5. DATA MANAGER.............................................................................................. 19
5.1. OVERVIEW .............................................................................................................................19
5.2. DATABASE CREATION .............................................................................................................20
5.3. DATABASE PROFILES ..............................................................................................................21
5.3.1 PROFILE CREATION .........................................................................................................22
5.3.2 PROFILE DELETION..........................................................................................................28
5.4. FILES IMPORT .........................................................................................................................29
5.4.1 LOCAL FILES IMPORT ......................................................................................................29
5.4.2 WMS FILES IMPORT .......................................................................................................38
5.5. DATABASE DELETION ..............................................................................................................44
5.6. DATABASE PROPERTIES ..........................................................................................................45
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential Table of content vi
8. TROUBLESHOOTING....................................................................................... 160
8.1. SQL SERVER PERMISSIONS ON ALU 9358 RFO FILE LOCATIONS FOLDER .............................160
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential Table of content ix
LIST OF FIGURES
Figure 3-1 Main Window...........................................................................................................................4
Figure 4-1 License Manager Window.....................................................................................................10
Figure 4-2 License Request Dialog ........................................................................................................11
Figure 4-3 Licensing with Installed Microsoft Outlook ............................................................................12
Figure 4-4 Licensing without Installed Microsoft Outlook.......................................................................13
Figure 4-5 Select the License File Dialog...............................................................................................14
Figure 4-6 Options Window, File Location Page ....................................................................................15
Figure 5-1 Data Manager Window .........................................................................................................19
Figure 5-2 Database Creation ................................................................................................................20
Figure 5-3 Database Properties, Profiles ...............................................................................................22
Figure 5-4 Profile Window ......................................................................................................................23
Figure 5-5 Profile Summary Window......................................................................................................24
Figure 5-6 Database Properties Window ...............................................................................................25
Figure 5-7 Advanced Profile Properties Window ...................................................................................26
Figure 5-8 Profile Summary Window......................................................................................................27
Figure 5-9 Database Properties Window ...............................................................................................28
Figure 5-10 Delete Profile Error Dialog Box ...........................................................................................28
Figure 5-11 Delete Profile Confirmation Dialog Box ..............................................................................29
Figure 5-12 Database Manager Window, Start File Selection Wizard ...................................................30
Figure 5-13 File Selection Wizard, Welcome Page................................................................................30
Figure 5-14 File Selection Wizard, First Step.........................................................................................31
Figure 5-15 File Selection Wizard, Second Step, File per file mode......................................................33
Figure 5-16 File Selection Wizard, Second Step, Per Directory mode ..................................................33
Figure 5-17 File Selection Wizard, Third Step........................................................................................34
Figure 5-18 File Selection Wizard, Complete Page ...............................................................................34
Figure 5-19 Files Processing Window, Files per Files Mode .................................................................35
Figure 5-20 Progress Indicator ...............................................................................................................36
Figure 5-21 Progress Indicator, Binning is Chosen................................................................................36
Figure 5-22 Files Processing Window, Directory Mode .........................................................................37
Figure 5-23 Data Manager Window after Files Processing....................................................................38
Figure 5-24 File Selection Wizard, WMS Files Import ...........................................................................39
Figure 5-25 WMS Server Settings..........................................................................................................40
Figure 5-26 File Selection Wizard, Connecting to Server ......................................................................41
Figure 5-27 File Selection Wizard, Retrieving File List ..........................................................................41
Figure 5-28 File selection Wizard, Select Data ......................................................................................42
Figure 5-29 File Selection Wizard, Selection of Several Files ...............................................................43
Figure 5-30 File Selection Wizard, Group Data......................................................................................44
Figure 5-31 Data Manager Window, Database Deletion........................................................................45
Figure 5-32 Delete Database Confirmation Dialog Box .........................................................................45
Figure 5-33 Data Manager Window, Database Properties ....................................................................46
Figure 5-34 Database Properties Window .............................................................................................46
Figure 6-1 Selection from Data Manager ...............................................................................................48
Figure 6-2 Active File List .......................................................................................................................49
Figure 6-3 Data Manager Window, Big Amount of Logical Files............................................................50
Figure 6-4 Selection from KPI ................................................................................................................51
Figure 6-5 KPI Tool ................................................................................................................................52
Figure 6-6 Active File List .......................................................................................................................53
Figure 6-7 Active File List, Context Menu ..............................................................................................54
Figure 6-8 User-defined reports usage ..................................................................................................55
Figure 6-9 Reports Manager ..................................................................................................................56
Figure 6-10 Reports Loading Warning Dialog Box.................................................................................58
Figure 6-11 Reports Deletion Confirmation Dialog Box .........................................................................59
Figure 6-12 Call trace selection dialog ...................................................................................................61
Figure 6-13 Report Computation Failure Dialog Box .............................................................................62
Figure 6-14 Report Builder .....................................................................................................................62
Figure 6-15 Call and Cell Lists ...............................................................................................................64
Figure 6-16 Components of the Call/Cell List.........................................................................................65
Figure 6-17 Stored lists dialog box .........................................................................................................66
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential Table of content x
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential Table of content xiii
LIST OF TABLES
Table 3-1 Main Window Areas .................................................................................................................5
Table 3-2 Standard Steps to Use ALU 9358 RFO ...................................................................................8
Table 5-1 Data Manager Window Areas ................................................................................................20
Table 5-2 Usual Steps to Create New Database ...................................................................................21
Table 5-3 Profile Selection .....................................................................................................................22
Table 5-4 Profile Window Areas .............................................................................................................23
Table 5-5 Files Processing Window Areas, Files per Files Mode ..........................................................35
Table 6-1 Usual Steps to Select Files from Data Manager ....................................................................48
Table 6-2 Usual Steps to Select Files from KPI .....................................................................................51
Table 6-3 Active File List, Context Menu Items......................................................................................54
Table 6-4 Standard Steps to Use User-defined reports .........................................................................55
Table 6-5 Reports Manager Areas .........................................................................................................56
Table 6-6 Report loading errors .............................................................................................................58
Table 6-7 Report computation failure messages ...................................................................................61
Table 6-8 Report Builder Areas ..............................................................................................................62
Table 6-9 Components of the Calls/Cells List ........................................................................................65
Table 6-10 List managing operations .....................................................................................................67
Table 6-11 Report View Areas ...............................................................................................................68
Table 6-12 Standard Steps to Use User-defined scenarios...................................................................72
Table 6-13 Scenario Manager Areas .....................................................................................................73
Table 6-14 Scenario Builder areas .........................................................................................................77
Table 6-15 Scenario makeup desktop areas..........................................................................................80
Table 6-16 Scenario makeup tree nodes ...............................................................................................81
Table 6-17 Events manager areas .........................................................................................................85
Table 6-18 Variables manager areas .....................................................................................................86
Table 6-19 Properties view areas...........................................................................................................87
Table 6-20 Causes selector areas .........................................................................................................89
Table 6-21 Quick access view areas......................................................................................................90
Table 6-22 Scenario Results View areas ...............................................................................................92
Table 6-23 Scenario Results View Detail part areas..............................................................................93
Table 6-24 KPI Window Areas ...............................................................................................................99
Table 6-25 KPI Tool Window, Context Menu Items .............................................................................105
Table 6-26 KPI Tool Window, Group Box, Context Menu Items ..........................................................105
Table 6-27 Message View Window Areas............................................................................................113
Table 6-28 Message View, Usual Steps to Create New Message Set ................................................115
Table 6-29 Message View, Usual Steps to Grid Search ......................................................................116
Table 6-30 Message View, Usual Steps to Message Details Search ..................................................117
Table 6-31 Message View Window, Grid Context Menu Items............................................................118
Table 6-32 Message Flow Window Areas............................................................................................120
Table 6-33 Grid View Window Areas ...................................................................................................121
Table 6-34 Column Selector Window Areas ........................................................................................123
Table 6-35 Graph View Window Areas ................................................................................................125
Table 6-36 Parameter Selector Window Areas ....................................................................................127
Table 6-37 Metrics Selector Window Areas, Single Statistic Mode .....................................................129
Table 6-38 Metrics Selector Window Areas, Multi Statistic Mode........................................................131
Table 6-39 Graph View, Usual Steps to Filter Data .............................................................................132
Table 6-40 Common Operations, Usual Steps to Filter Data...............................................................139
Table 6-41 Common Operations, Usual Steps to Set Custom Filter....................................................140
Table 7-1 Usual Steps to Decode hexadecimal string .........................................................................154
Table 7-2 Log Window Areas ...............................................................................................................158
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 1
1. INTRODUCTION
1.1. SUBJECT
The Alcatel-Lucent 9358 Radio Frequency Optimizer User Manual provides
information on the usage of the Alcatel Lucent 9358 Radio Frequency Optimizer
product.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 2
2. REFERENCE DOCUMENTS
3. OVERVIEW
The ALU 9358 RFO provides an easy-to-use tool for the examination of RF links
between base stations and mobiles. Use ALU 9358 RFO to ensure that the network is
operating efficiently by observing its detailed analysis of key statistics, and by the
presentation of key parametric information in various graphical modules.
ALU 9358 RFO analyses the data from those different physical files to create various
statistics and views of the data.
There are two editions of ALU 9358 RFO application: standard and professional.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 4
6
5
8 9 10
1 View area. Different views may be displayed at this area (Message view, Grid view,
Graph view, etc).
2 Active File List. Logical files to work on can be selected from this view.
3 Reports and Scenarios Managers. User-defined reports and scenarios are managed
by using these views (professional edition only).
4 Call/Cell Lists. May be used to select calls/cells for analysis (professional edition
only).
Unzip utility.
Graph view.
Grid view.
Message view.
Message Flow.
KPI.
Options.
Settings
Binning.
10 License information.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 6
- File
Data Manager opens Data Manager. Refer to section 5 for details
Decompress Files (.gz) starts Unzip Utility. Refer to section 7.2 for
details.
Message Export starts Message Export. Refer to section 7.3 for
details.
Close closes ALU 9358 RFO
- View
Active File List shows/hides Active File List window
Output Window - shows/hides Output window
Info Window - shows/hides Info window
Call List - shows/hides Calls List (professional edition only)
Cell List - shows/hides Cells List (professional edition only)
Reports - shows/hides Reports Manager (professional edition only)
Scenarios shows/hides Scenario Manager (professional edition only)
Toolbars
o Standard - shows/hides Standard toolbar
o View - shows/hides View toolbar
o Tools - shows/hides Tools toolbar
o Options shows/hides Options toolbar
Switch Synchronization Mode switches between single-file and
multi-file synchronization modes. Refer to section 6.8 for details.
Graph opens Graph view. Refer to section 6.9 for details.
Grid opens Grid view. Refer to section 6.8 for details.
Message opens Message view. Refer to section 6.6 for details.
Message Flow opens Message Flow Diagram. Refer to section 6.5
for details.
- Tools
License Utility starts licensing utility which allows requesting for a
license and providing it for ALU 9358 RFO. Refer to section 4.1 for
details.
Options open Options. Refer to section 4.2 for details.
Settings import/export settings. Refer to section 4.3 for details.
o Import
o Export
KPI open KPI view. Refer to section 6.5 for details.
One Shot Hexa Decoding Tool starts One Shot Hexa Decoding Tool.
Refer to section 7.1 for details.
- Windows
Cascade arranges opened windows as a cascade
Tile Horizontal - arranges opened windows as horizontal tiles
- Help
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 8
- Click button.
Please refer to section 5.4 for details.
5 Select a database for analysis.
Open KPI
6
- In the main window click button.
Select files from the Calls KPI tab.
7
8 Select files to add in active file list for investigation from the Calls KPI.
Please refer to section 6.1.2 for details
Open Message View.
9
- In the main window click button.
Please refer to section 6.4 for details.
Open Grid View.
10
- In the main window click button.
Please refer to section 6.8 for details.
11 Select one or more metrics.
Refer to section 6.8.2 Grid Options for details
Open Graph view from the Grid view.
15
- In the Grid view click button.
Please refer to section 6.9 for details.
Select a report (professional edition only)
13
Create/open a user-defined report using Reports Manager. Refer to section 6.3.2
for details.
Note: You can open more than one different view for the same file.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 10
4. CONFIGURATION
4.1. LICENSING
The ALU 9358 RFO usage is protected by a license. The ALU 9358 RFO license is a
binary file delivered to the licensed user. The license gives the right to use one ALU
9358 RFO edition to one user on one computer. The license has a specific duration.
When the ALU 9358 RFO is started the first time, it requests for a license.
Specify the first, the second name and your e-mail. Select the desired license
expiration date. Note that the expiration date may be linked to the contract hold to your
local purchase team.
If you have the Microsoft Outlook installed, press Send by Email button the
Microsoft Outlook is started and the ALU 9358 RFO automatically composes the e-
mail containing information required for licensing:
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 12
Send this e-mail to the local ALU 9358 RFO purchase team.
If you do not have the Microsoft Outlook installed, press View button. The
License Request window appears. The window contains the information required
for licensing:
Send this information to the local ALU 9358 RFO purchase team.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 14
When a license file is obtained, start the ALU 9358 RFO and press Browse for
Licence button. Select licence file window appears.
Select the license file and press OK. If the license is accepted, the ALU 9358 RFO
main window appears and the product can be used.
License expiration
When a license is about to expire (less than 90 days before the expiration), the ALU
9358 RFO displays a warning each time it is started.
If you want to renew the license, select Tools>Licence Utility menu. Then follow
the same steps as for requesting a new license described above.
Note: ALU 9358 RFO will not ask for license after upgrade.
4.2. OPTIONS
Select Tools>Options from the menu or press button on the toolbar. The
Options window has three tabs:
File locations tab contains parameters specifying where the ALU 9358 RFO stores
different types of files:
- Database data files the folder where the ALU 9358 RFO stores database
files. If you change the parameter, the ALU 9358 RFO will create new
databases in the specified directory. Previously created databases are
still available.
Important: Make sure that the Windows account you currently logged
on and Log On As account of SQL Server (UMTS_RFO) Windows
service have full access permissions on Database data files folder. For
more information please refer to 8.1 SQL Server Permissions on ALU
9358 RFO File Locations Folder.
- Default input folder - the default folder proposed by ALU 9358 RFO when
you want to import data into a database.
- Temporary files the folder where the ALU 9358 RFO stores its
temporary files.
Important: Make sure that the Windows account you currently logged
on and Log On As account of SQL Server (UMTS_RFO) Windows
service have full access permissions on Temporary files folder. For
more information please refer to 8.1 SQL Server Permissions on ALU
9358 RFO File Locations Folder.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 16
- Report files (professional edition only) the default folder where the
user prefers to store user-defined report files.
- Support logs the folder where UMTS - RFO Extraction Log.txt file is
stored. The file contains logs related to ALU 9358 RFO work.
Important: Make sure that the Windows account you currently logged
on has full access permissions on Support logs folder.
- Scenario files (professional edition only) the default folder where the
user prefers to store user-defined scenario files.
- Scenario results (professional edition only) the default folder where
the user prefers to store the results of user-defined scenario
computations.
If you want to modify a parameter on any tab, select it from the list and edit them
manually or use arrows buttons for increase or decrease.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 18
4.3. SETTINGS
Configuration parameters (settings) store a set of values related to various ALU 9358
RFO components, for example it may be window position or window state of any
ALU 9358 RFO view, information about defined profiles, option binning parameters
etc. Settings are stored in the user.config file. Working with ALU 9358 RFO user is
able to change implicitly some configuration parameters and modify user.config file.
ALU 9358 RFO application provides import and export settings mechanism called
Settings Manager.
Export operation. Settings manager parses current user.config file, makes the list
of available for export parameters and presents it to user. User selects necessary
parameters to export and defines the name and location of the file with exported
parameters.
Import operation. User defines the name and location of the file with appropriate
parameters to import. Settings manager parses selected file, makes the list of
available for import parameters and presents it to user. User selects necessary
parameters to import. Settings manager adds or replaces user.config parameters
with parameters defined in the selected file.
5. DATA MANAGER
5.1. OVERVIEW
The Data Manager allows you to:
- Create and delete databases
- Import trace data files into a database
- Select files from a database to form the Active File List for analysis
In the Data Manager, you can only select logical files to view from one database at a
time. Each file within a particular database contains a list of call events identified
within that file.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 20
1 Databases list.
3
Toolbar.
Note: when the data manager is opened, all others windows of ALU 9358 RFO cant
be selected.
5 Press OK button.
Profiles allow you to save time during importing data into database, but if you do
not import all data, some analyses will not be available.
You can choose one of the predefined profiles or create a custom profile (which also
can be saved and reused for creating other databases).
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 22
1 2
1 Click on the Name listbox in the Profile section of the Database Properties
and choose a name of a predefined profile.
1 Predefined profiles
3
Delete selected profiles button
4
KPI
5
Analyzers
6
Advanced button
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 24
When all profile components are chosen, press Finish button. The Profile Name
window displays the summary for the profile to be created and asks for a profile
name:
Enter the profile name and press OK button. The Database Properties window will
appear and you can continue the database creation:
You can select more precisely the information you want to import by clicking
Advanced button in the Profile window. The Advanced Profile Properties
window appears:
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 26
Enter the profile name and press OK button. The Database Properties window will
appear and you can continue the database creation:
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 28
Note: The custom profile can be edited in Profile window. The profile is saved only
when the database is created using it. If you cancel the database creation, the
profile will not be saved and can not be used as a custom profile for other
databases.
Note: It is recommended to use Full profile for databases which you are going to
calculate PIs (refer section 6.3 User-defined reports for details) for. Using custom
profiles can cause incorrect PI calculation.
button .
Note that it is impossible to delete a profile if an existing database uses it. The
error is displayed in this case. To delete this profile, firstly remove all databases
that refer to it.
When disk space is low on the drive where ALU 9358 RFO databases are stored, a red
exclamation mark may appear in the Data Manager next to the database icon. This
icon appears when disk space is low and may be insufficient for further operations
with the database.
The user should free up disk space or consider changing database location in the ALU
9358 RFO options, and then recreating the database and load the files anew.
Note: database size depends on the type of imported XML trace files and their
content. You can take into account that the ratio of raw XML trace files to the
database size is something of 1 to 3 (for example, 1 Mb of raw files means a 3 Mb
database size).
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 30
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 32
Import folder list (only for per directory mode) - You can select a
file containing the list of folders to process in your database. In this
mode subfolders are not processed.
File format is the following:
o one full folder path by line;
o one folder by line;
o lines starting from symbol # are skipped;
o lines with invalid paths are skipped.
Trace key list (only for per directory mode) - You can select a file
containing the list of trace keys to be loaded in your database.
Two file formats are supported:
o CSV files;
o txt files.
CSV file format:
<Optional header starting from "traceKey" column>
<traceKey>,<column2 value>,<column3 value>...
Example:
130--2113829980,"32","2009-12-03"
130--2113830060,"32","2009-12-04"
130--2113829976,"32", "1"
Example:
130--2113829980
130--2113830060
130--2113829976
- File Type filter you can select a file type (Call Trace IN, Call Trace CN or
both). The ALU 9358 RFO imports only files of the selected type.
- -
You can define these filters on the File Types Window:
Figure 5-15 File Selection Wizard, Second Step, File per file mode
Figure 5-16 File Selection Wizard, Second Step, Per Directory mode
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 34
After the third step a Complete Window occurs. If you are sure in your choice, press
Finish:
In this dialog you can define some import parameters, such as:
- Combined CT Sessions Delta (seconds).
- Gather the OTCell messages by CellId.
- Decode Additional Info Enable Decode Additional Info feature.
- Time Zone.
- Temporally bin data after processing if the checkbox is checked, the ALU
9358 RFO automatically starts data binning just after importing data into a
database
If you select Files per Files mode without import file list, the Select Files for
Processing window appears:
1
2
Table 5-5 Files Processing Window Areas, Files per Files Mode
1 Directory tree on the local machine. It displays only Call Trace files passed the
File Type filter
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 36
The Directory Tree pane displays Call Trace files filtered by the File Type filter.
Files displayed in bold are already imported into the database and can not be
imported again. Compressed files are not displayed; you should use the built-in tool
(refer to 7.2 Unzip Utility) to decompress them before selecting or select Directory
mode.
You can select files or directories and add them into the list of files to be processed
by pressing Add button. The ALU 9358 RFO controls duplicates i.e. if a file is
added into the list, another file with the same name from a different directory can
not be added.
You can remove files from the list of files to be processed by pressing Remove or
Remove All button.
Note: When selecting trace files to be imported, the file list in the selected folder is
not refreshed.
When all needed files are added into the list, press OK button, the ALU 9358 RFO
starts processing
Warning: The file processing can not be cancelled. The ALU 9358 RFO will process
all selected files.
If binning after processing is chosen then operation is started. Files are processed by
groups of 100 files. Cancelation is possible between processing of two groups.
If you select Directory mode without import folder list, the Browse For Folder
window appears:
Select a directory containing files to be processed and press OK button. The ALU
9358 RFO starts processing all Call Trace files from the selected directory and its
subdirectories. Compressed files will be replaced by their decompressed versions.
Note: Directory folder mode doesnt control duplicate files in bold.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 38
Note: In case when there is no UE id in the trace, trace files are combined according
to the Session Id.
If you select WMS server(s) mode on the Select File Picker dialog, next window
appears:
At first you need to define a WMS server. For this purpose press the Configure
WMS Connections button and the WMS server settings window appears:
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 40
On the WMS Server Settings window you can define what servers to be used, input
connection and authentication settings and select the directory for files which will
be downloaded from the chosen servers.
If you have filled all fields press the OK button. ALU 9358 RFO begins to connect and
retrieve list of trace files from the chosen server or servers:
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 42
Once list of files has been retrieved, user is able to choose necessary data (file(s))
and it'll be automatically downloaded to the target directory and after that it'll be
imported to the ALU 9358 RFO.
If you check Keep files in the local directory checkbox, the downloaded trace
files are kept in the target directory. Otherwise, the ALU 9358 RFO deletes them
after import.
To invert current selection use the Inver Selection button. To refresh data in
Grid press the Refresh Data button. If you want to save data that Table
contains click Export to File button and then specify the text file in the Open
Dialog Window. For more convenient marking of several files you can use commands
of the context menu that appears after right click on the selected rows (see figure
bellow).
You can also apply grouping by one or several columns. For this purpose drag a
column header on the group box. It allows you to mark/unmark whole groups of
files. In the header of each group row you can see some information: group name,
number of files, total file size (see next figure).
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 44
Note: Individual Call Trace files can not be deleted from a database. If you want to
delete some files from a database, you have to delete whole database, create a new
one and import necessary files into it.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 46
The Database Properties window shows the database parameters chosen during the
creation name, Call Model. The window contains several information sections. The
sections can be expanded/collapsed by clicking on them. There are the following
sections:
- Profile section displays the profile chosen during the database creation. For
profile details press View Profile Summary button
- Database section displays the database creation time, version and the
current size of the database.
- Description section allows you to change the database description
- Summary section displays the log of actions performed on the database.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 48
6. DATA REPRESENTATION
2 Select database.
4 Click OK.
Files selected for analysis construct the Active File List. The Active File List is
displayed in the main ALU 9358 RFO window, and is one of several synchronized
views.
Warning: If database contains more than 124 logical files, they are not displayed in
the Active File list. Instead, please select logical files from KPI, see section 6.1.2 for
details.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 50
5
3
3 Select Files.
The grid data related to the currently selected file is highlighted in red.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 52
Files for the Active File list can be selected from any KPI. For example, Message
Parsing KPI:
If you double click on a grid line, all logical files related to the line are added into
the Active File list.
Files can be removed from Active File List.
Review the Data Manager section to see how to select files for analysis in the Active
File List.
Choose a file for display from the Active File List, then click a toolbar button or
menu item to open a View. The opened view can be synchronized to the Active File
List, and to all other open views. The selected file is highlighted in bold.
The root is called Call Trace Files and shows the number of files in the Active File
list. The sublayers of the tree are:
- Group of logical files the grouping depends on the trace file type. The
group name is built from:
- trace record session identifier for Call Traces
- folder name or Cell identifier for OTCell
- Logical file name displays names of logical files in the Active File list.
- Call displays calls from a logical file.
The Active Files List is synchronized - if you click on a tree element (file name,
etc) a corresponding line in opened views is selected.
6.2.2 OPERATIONS
In the context menu there are special operations for the each logical file. Double
click on a file to select it.
Right click on the filename to display context menu.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 54
6.3.1 OVERVIEW
User-defined reports allow you to create your own reports (views) and customize
them to meet your purposes. For each report you may define its type (per Call or
per Cell) and a set of PIs that should be computed.
Computation of a report is performed for the list of calls/cells selected by you from
the database. The result of computation is a table where for each call/cell
corresponding values of PIs are displayed.
2
6 3 4
The table below describes a standard scenario of the User-defined reports usage.
Note: It is recommended to use Full profile for databases which you are going to
calculate PI for. Using non-Full profiles can cause incorrect PI computation.
2
Toolbar.
Context menu
3
It contains the same commands as toolbar and the following surplus commands:
1. Select all select all reports in the list
2. Clear all remove all reports in the list
Reports Manager has two tabs, one per report type. All reports are automatically
distributed between them.
Displayed report name matches the name of the corresponding report file. This file
has XML format, extension .udr and may be stored at any location specified by the
user during creation. It does not contain any computed data, but represents the
exhaustive report description:
o Version
o Type
o Comment
o List of PIs
You may create new reports, open reports from existing files and edit reports by
using Report Builder. Each time when any modifications are made they are stored in
the appropriate report file. When you close ALU 9358 RFO the list of currently
opened reports is stored in the settings file. These reports are automatically opened
on the next ALU 9358 RFO startup.
Each report has version. It is the same as version of the ALU 9358 RFO where a
report has been created or modified.
2. Configure your report by using Report Builder (see section 6.3.3 for details):
b. Choose PIs
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 58
You are able to open one or several reports from the existing files:
2. Select files to open and click Open in the dialog. All selected reports will
be added to the Reports Manager. The files that are already loaded will be
skipped and the corresponding informational message will be displayed in
the Output window.
If any files were not loaded due to some errors a warning dialog box is displayed. All
errors are logged in the Output window.
1
Incorrect indicators are skipped and not loaded, but the report file is not updated automatically.
When you open it next time the same warning message will be displayed. To fix the report file, save
it.
NN-20500-181 03.12/EN Preliminary March 2010 Copyright 2003-2010 Alcatel-Lucent
Alcatel-Lucent Confidential 59
You may remove unnecessary reports from the reports list (Note that report files are
not removed from the disk). To do that:
3. If more than one report is selected the dialog box requesting confirmation
will be displayed. Click Yes. All the selected reports will be removed.
4. Also you can remove all the reports by using context menu item Clear all.
2. Configure your report by using Report Builder (see section 6.3.3 for details):
3. To save the report with the same name press Save button in the Report
Builder window.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 60
4. To duplicate report press Save As button. Choose file name and location
using the save file dialog. Then click Save. The report will be saved at the
specified location and a new report will be added to the reports list.
1. Select in the Report Manager a report that you want to be computed. Only
one report may be computed at the same time.
2. Select calls/cells to be analyzed using the Calls/Cells list (refer to section
6.3.4 for details). Note that if no calls/cells were selected, then
computation is performed for all calls/cells in the current database.
5. After computation completes, a Report View window with the results will be
displayed.
6. If you start computation for the same report and calls/cells again, the result
will be displayed in a separate Report View window. To refresh current
window use Report Views button Refresh (refer to section 6.3.5 for
details of the Report View usage).
1. Select in the Report Manager a report that you want to be computed. Only
one report may be computed at the same time. Note that only per Call
reports can be run on Call Traces.
Select the directory with call traces then press OK button and
computation will be started.
4. Use button Cancel on the progress form to skip computation.
5. After computation completes, a Report View window with the results will be
displayed.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 62
7 8
8 Report description
Using Report Builder you may view reports content, modify it and save to a file.
You can also navigate a report you wish to work with through the list of available
reports. Usual steps to modify a report are the following:
3. Remove indicators
To remove indicators from the list of reports indicators you should select
ones you want to be deleted and use Remove selected context menu
command (or its respective shortcut key: Delete). You can also remove all
indicators but the selected ones (cropping) by using the corresponding
context menu command (or its respective shortcut key: Ctrl+Delete). It is
also possible to remove indicators simply by dragging the selected ones out
from the Used indicators in report pane.
4. Add a description.
Use this field to add any information about your report.
5. To save your report to already existing file (its name is displayed in the
title) use button Save. If you want to save it in a new file use button
Save As....
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 64
These two controls are identical. The only difference is that the Calls list manages
calls, while the Cells list manages cells.
Each control is divided into two major areas (Figure 6-15). Upper area is Showcase
contains a list of all calls/cells currently stored in the database. It is empty when
you start ALU 9358 RFO, because there no database is selected in the Data Manger.
To populate it with calls/cells a database should be selected (see Section 5 of the
document for details). Every time when you import new data in the database or
select another database this area is refreshed.
At the bottom the lists and the consequent managing tools are located (see list
managing operations in the Table 6-10). You can work with several lists at a time,
but process items (calls/cells) from only one you have selected.
4
3
1 Showcase - list of the all available items (calls/cells of the current database)
4 Toolbar managing operations that can be performed over the list or desk
You may add any number of lists to the desk and fill it with any calls/cells from the
Showcase. So, each list on the desk will contain its own set of the calls/cells. It is
very handy to have a desk with lists you want analyze. You can quickly build
different reports just switching between these ones (note that when you run report
computation, calls/cells from the current list are used).
To create a new list use button New List . After the new list has been created
you can add calls/cells to it from the Showcase. Simply drag items from the
Showcase (upper section of the Calls/Cells List control) or use context menu item
Pick up selected (it can be accessed by its corresponding shortcut key: Ctrl+G). To
remove all or specific calls/cells from the list use the corresponding context menu
or toolbar items: Remove all (respective shortcut key: Ctrl+X) or Remove
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 66
selected (respective shortcut key: Delete). You can also remove all items but
selected ones (cropping) by using Remove all but selected menu option (it can
be accessed by its corresponding shortcut key Ctrl+Delete).
After you constructed some list you may want to save it for further use. Such ability
is provided. You may save/open/delete lists. They are stored not on the disk, but in
the current database. This is done because a list is a subset of calls/cells is present
in the database. And so, this is reasonable to associate it with the database.
The following operations may be performed:
Save the current list to the storage (database) by using button Save
List.
Delete a list from the storage database by using button Delete a saved
List. In this case the current list is erased in the storage and removed from
the desk.
Open a list from the database by using button Open a saved List.
Loading is performed via the following dialog (Figure 6-16) that displays all
lists stored in the storage.
Another useful option is an ability to memorize lists that are currently opened on
the desk to be automatically restored when you select this database next time. It
can be obtained through the button Save List Set also. When desk is saving
the all changed lists are saved in the storage too. You can also to restore manually
For all available managing operations, please see the table below (Table 6-10).
A new Report View window is created each time when you start computation using
Report Manager. You may open several Report Views for the same report. They may
differ from each other since there is no automatic synchronization. For example you
may compute some report once, then remove some indicators from the report and
compute it again. In this case you will have two Report Views with different results,
but for the same report. If you want to refresh already existing window use option
Refresh (see below).
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 68
All Report Views are closed when you delete currently selected database or select
another database.
2 Aggregation row
3 Toolbar
Refresh button
The result of report computation is a table. Each row corresponds to one call or
cell. The first column contains ID of call/cell. Other columns represent values of
calculated PIs.
You are able to perform standard grid operations like filtering, sorting etc. Also
there are the following specific options that may be accessed through toolbar
buttons or the corresponding context menu items:
o Refresh:
You are able to refresh a Report View to reflect recent changes made to the
report, database or list of selected calls/cells. In this case the report will be
computed again using fresh data and the result will be displayed in already
opened Report View.
o Add Calls/Cells To List:
This options allow you to select calls/cells in the Report View and add them
to the list of selected calls/cells. Note that you can also do it by simply
dragging the specified items to Calls/Cells List with mouse.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 70
If you select the TXT format the additional export option dialog will
appear..
1. Text separator this is a string that will be placed between data fields.
There are two predefined separators: TAB (tabulation) and comma (,).
2. Quote strings with separators whether to surround data fields that contain
text separator with quotes.
6.4.1 OVERVIEW
User-defined scenarios allow you to analyse calls and collect required information
about them.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 72
6 3
Run scenarios
6
- Select scenarios
3
4
2
Toolbar:
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 74
3
Scenario file
4
Scenario
The imported user-defined scenarios are represented in the form of tree. The
parent elements represent scenario files; the child ones represent scenarios from a
certain scenario file.
Displayed scenario file name matches the name of the corresponding report file.
The file has .sce extension and may be stored at any location specified by the
user during creation.
2. Configure the scenario file using Scenario Builder (see section 6.4.3
Scenario Builder for details).
You are able to open one or several scenario files from existing files:
2. Select files to open and click Open in the dialog. After checking on
consistency the selected scenario files will be added to the Scenario
Manager. If some scenario file or some element in it does not satisfy the
scenario files format the corresponding warning message will be displayed in
the Output window.
3. The files that are already loaded will be skipped and the corresponding
informational message will be displayed in the Output window.
You may delete unnecessary scenario files from the reports list (Note that scenario
files are not removed from the disk). To do that:
2. Configure your scenario file using Scenario Builder (see section 6.4.3
Scenario Builder for details).
3. To save the scenario file with the same name press Save button in the
Scenario Builder window.
4. To duplicate scenario file press Save As button. Choose file name and
location using the save file dialog. Then click Save. The scenario file will
be saved at the specified location and a new scenario file will be added to
the scenario files list.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 76
2. Click toolbar button Run on call trace files to drop down a list and
choose desired option in it (or use the corresponding item in the context
menu). Note: if you simply push the button, the Run on specified Call
Traces option will be performed. There are several ways to calculate
scenarios on call trace file in the RFO. To perform calculation of scenarios:
a. on the selected call trace files, use Run on specified Call Traces
option;
b. on the last used call trace files, use Run on last used Call Traces
option;
c. from the file with list of call trace file names, use option Run on
Call Traces specified in the file.
3. In appeared Browse for Folder window select a directory to be analyzed.
After clicking OK ALU 9358 RFO starts the computation for files from the
selected directory and its subdirectories.
4. After the computation completes, a Scenario Results View window with
the results will be displayed.
2. Select calls to be analyzed using the Calls list (refer to section 6.3.4 for
details about Call list). Note that if no calls/cells were selected, then
computation is performed for all calls/cells in the current database. If no
database is selected the computation is not performed.
3. Click toolbar button Run on database or the corresponding item in
the context menu. The computation starts.
6.4.3.1 OVERVIEW
Using Scenario Builder you can create and edit scenario files. It may be invoked
from Scenario Manager.
1
2
6
7 3
4 5
2 Toolbar
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 78
Undo all undo all changes made since the last save operation
3
Scenario makeup desktop
4
Events manager
5
Variables manager
6
Properties view
7
Quick access view
File selection
You are able to navigate through scenario files that are currently loaded and open
any of them for editing. It can be done by using the File selector combo box
placed on the Scenario Builder toolbar or via the corresponding menu item of
Quick access view.
To create a new scenario file click toolbar button New scenario file . A file
with the minimum contents will be generated and opened for editing.
To save all changes to a scenario file click toolbar button Save . If the button
is disabled, it means that no modifications were made and there is nothing to save.
Use toolbar button Save As , if you want to save a file to a specific location or
with a different name.
The default path where scenario files are located may be configured in Options.
Undo all changes
If you want to undo all changes that were made since the last save operation, use
Event manager
Variable manager
Each of these views is in charge of a certain part of scenario file. Events manager
and Variables manager are responsible for events and variables lists respectively.
Scenario makeup desktop manages states list and the most important part of
scenario file - scenarios lists.
Mostly these views are intended for addition, removal and duplication of items.
Editing of items contents is performed via the Properties view which displays
properties of the currently positioned item.
The Quick access view serves as a browser with ability to glance over contents of
loaded scenario files (except current) and copy items from them to the currently
opened scenario file.
You can configure Scenario Builder views according to your preferences: dock any
view at the desired position, hide, close or open it. To do that, use views buttons
and menu View located on the Scenario Builder toolbar.
Overview
Scenario makeup desktop is the most important part of Scenario Builder. Its
main purpose is management of scenarios that are contained in the edited scenario
file. Using this control you can add, remove, duplicate scenarios and define their
structure.
Also Scenario makeup desktop manages states contained in the current scenario file.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 80
1 Toolbar
Remove selected
Duplicate
2
Scenario makeup tree
All toolbar commands can be accessed via context menu as well. Also context menu
contains some surplus commands:
Data in Scenario makeup desktop is represented in the form of tree where each
node is an element of scenario file. This tree consists of two parts:
1. States list.
All states used in scenarios are displayed here.
2. Scenarios list.
This part of tree defines scenarios.
States list all states from the scenario file are displayed under this
tree node.
Scenario defines scenario properties. Scenarios must have unique
names.
These nodes have different meaning depending on their position in
the tree.
1. When they are displayed under node States, they represent
states defined in the scenario file.
States should have unique names. States Start and Finish
are predefined and their properties and position in the tree
cannot be changed. Take into account that states are shared
between all scenarios and may be referred by several
scenario-states. If you modify or remove a state, all related
scenario-states will be affected.
2. When these nodes are displayed under scenario node, they
represent scenario-states.
Each scenario may contain one or more scenario-state. Each
of them references a state from states list. A scenario must
contain scenario-state referring predefined state Start (it
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 82
State-event
Each scenario-state may contain several state-events. Each state-
event refers to an event from events list. When this event is
encountered during processing and all conditions defined in the
state-event are met, actions associated with this state-event are
performed and transition to Next state occurs. Text => State A
means that Next state for this event is state with name State
A.
Postprocessing
This element contains a list of actions that are performed after a
scenario is moved to state Finish or the last event of a call is
reached.
Action
This node defines an action that should be performed on the
corresponding variable.
Next sections describe operations that may be performed by using Scenario makeup
desktop.
To add a new element, use an appropriate toolbar button or a context menu item.
After an element is created it is automatically positioned and its properties became
available in the Properties view. Then use the Properties view to configure a
new element as you want.
Click toolbar item Add new scenario . A new scenario with default properties
and contents will be created.
scenario-state and click toolbar item Add new state . A new state will be
generated and added to the states list. Then a scenario-state that refers to the
newly created state will be added to the specified position.
scenario-state and click toolbar item Add existing state . In opened drop-down
list select a needed state. A new scenario-state that refers to the selected state will
be added to the specified position.
Add new scenario-state using existing state via Drag & drop
Drag a state from states list to a desired position. A new scenario-state that refers
to the dropped state will be added to the specified position.
Add new state-event using existing event via Drag & drop
Drag event(s) from another view (Events manager or Quick access) to a desired
position. New state-event(s) that refers to the dropped event(s) will be added to the
specified position.
action . In opened drop-down list select a needed variable. A new action for
the selected variable will be added to the specified position.
Remove selected
Select the items you want to remove. Click toolbar item Remove selected .
Note that some items cannot be removed due to their specifics (e.g. predefined
state Start). Also if there is a relationship between item to remove and some
other items additional modifications will be made automatically. For example if you
remove a state from states list all scenario-states that refer to it will be removed as
well. In such cases you will be asked whether you want to continue the operation.
Duplicate
Almost all items located on Scenario makeup desktop may be duplicated. To do
that position an item that you want to duplicate and click toolbar item Duplicate
. A copy of the specified item having the same contents will be created.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 84
text in the desired cell. Note that editing for some items is restricted due to their
specifics (e.g. name of predefined state Start cannot be changed).
for adding new items by dragging them from other controls (Quick
access, Events manager, Variables manager)
to define a transition between states
How and where a dragged item is placed and what action is performed depends on
the type of item you drag and item that is currently under the cursor. An icon
explaining potential drag-drop action is displayed in front of position where you are
going to drop item.
2. - this icon indicates that a dragged item will be inserted after currently
positioned item. Note that by default items are inserted before currently
positioned item. To insert it after hold SHIFT key.
You can change order and location of items inside tree for your own purposes. To do
that, simply drag an item to a new position.
Moving may be restricted if it may lead to any syntax error in the scenario file. For
example if you try to move a scenario-state to a scenario that already contains it,
such operation will be rejected, since scenario should not contain two scenario-
states with identical names.
Also moving may lead to some changes of scenario items properties. Such changes
are made to keep the scenario file consistent. For example if you move a scenario-
state to another scenario, all state-events that refer it as Next in old scenario
now will refer to predefined state None. In such cases you will be asked whether
you want to continue the operation.
You can define transition between states by dragging a scenario-state that should be
Next to a state-event that should lead to transition. If transition is allowed an
icon in front of the target scenario-state will change to .
Clear all
Select all
Expand/Collapse tree
You can collapse/expand the whole tree or a node with all its descendants. Use
corresponding context menu items for that.
Events manager is responsible for editing of events list. Using this view you can
create, remove and duplicate events. Events must have unique names. Each event
may be used in several scenarios.
1 Toolbar
- duplicate event
Events list
2
For each event in the list the following information is displayed:
Name
CT event name of call trace event associated with this event
Comment
3 Context menu
Variables manager is responsible for editing of variables list. Using this view you
can create, remove and duplicate variables. Variables must have unique names.
Each variable may be used in several scenarios. Variable Return is predefined. It
cannot be removed. Its type and name cannot be edited.
1 Toolbar
- duplicate variable
Variables list
2
For each variable in the list the following information is displayed:
Name
Type
Default default value
Comment
3 Context menu
This view provides ability to browse and modify properties of scenario files
elements. The currently positioned element of the current view is displayed.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 88
2
Description of the selected property
In most cases drop-down list for combo box editors contains only those values that
may be assigned to the current property. For example, when you select state
associated with scenario-state, editors drop-down list does not contain states that
are already used in the scenario.
Most of properties are edited via usual text or combo box editors. But some of them
require a specific editor. The following control is used for editing of call trace
events causes list.
1 2
4
5 6
3 Pick up causes button click it to add causes to the list of selected causes. The
same operation may be performed by double-clicking on the item to pick up and
via drag & drop.
4
Remove causes button click it to remove causes from the selected causes list
5
OK button click it to confirm selection
6
Cancel button click it to skip all changes and close the form
The Quick access view serves as a browser with ability to glance over contents of
loaded scenario files (except current) and copy items from them to the currently
opened scenario file.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 90
2 Context menu
1. Open file for editing
2. Expand expand a node and all its descendants
3. Collapse collapse a node and all its descendants
4. Expand all expand all nodes in tree
5. Collapse all collapse all nodes in tree
For each loaded scenario file, the Quick access view displays lists of events,
variables, states and scenarios. You can see structure of each scenario and
properties of each element, but any editing is restricted.
The elements that cannot be copied are grayed out. The rest may be copied to the
currently opened scenario file by dragging them to a desired position.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 92
1 Report area
2 Tabs containing Summary and Detail parts of the Scenario Results report
3
Toolbar.
The report consists of two parts Summary and Details. Each part is displayed on a
separate tab.
Summary part displays return value for each scenario per call id.
Details part displays variable and transition values for each scenario
1
2
1 Report area
The scenario structure tree represents the structure of the processed scenarios
variables, states and transitions. When you select a tree node, the corresponding
detail report is displayed in the report area.
If you select a variable node of a scenario, the report contains variable value per
call id.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 94
If you select the Variables node of a scenario, the report contains the summary for
all scenario variables.
If you select a transition node of a scenario, the report contains transition value per
call id.
If you select a state node of a scenario, the report contains the summary report for
all transitions of that state.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 96
For all reports you are able to perform standard grid operations like filtering, sorting
etc. Also the following specific operations are available:
Export to file
Export to file
It is possible to export the reports to CSV or Excel files. There are the following
report types:
Scenario report scenario summary (scenario return values per call id)
Transition reports transition values for all scenarios per call id]
Press Export to File button on the toolbar. A drop-down menu appears.
Select the report type to export. Full report means that all reports are exported.
The Save report dialogue appears.
Enter the file name and select the type of exported file (CSV or Excel). Press Save
button.
Note: if you export into CSV, the following postfixes are added to the file name:
_scenarios for the scenario report
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 98
6.5. KPI
6.5.1 OVERVIEW
Press KPI button to start the KPI tool.
1 KPI list
2 KPI values
3
Toolbar.
- Print preview
- UL RSSI Settings
6.5.2 GROUPING
Turn filtering on.
For details on how to filter data in the grid refer to section 6.11.2.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 100
Drag File Name header column on the area above the grid. All grid lines are divided
into groups. Each group contains lines with the same value of the File Name column:
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 102
To ungroup the grid by a column, drag the corresponding column header from the
top area back to the grid.
Note: When you open some KPI grids the first time, they already have the default
grouping.
Also you can use Column Chooser tool for grouping. This tool might be used as a
temporary placeholder for some user-defined columns. Mouse right-click on any
column in KPI window -> Choose Column Chooser:
Column may be placed to the Column Chooser storage implicitly by dragging column
to any place of KPI window, or explicitly by dragging column to the Customization
window.
Column chooser can be used when you want to define column order in KPI window.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 104
Also, in the context menu there are special operations for the each column
In the context menu of the Group Box you can choose following
Table 6-26 KPI Tool Window, Group Box, Context Menu Items
Full Expand Expands all items
Full Collapse Collapses all items
Clear Grouping Ungroup all
This statistic is defined to have a view of all the logical files included in the database.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 106
Column Description
File Id Identifier of this logical file in ALU 9358 RFO
Logical File Name This is the logical file name
File Type Indicates if its a CallTrace, Otcell type of file
Session Indicates the session from SessionRef tag
UE Identifier Identifier found in call trace header (IMSI, IMEI)
Has GPS Not Applicable
First Physical File Full The full name may help to know the folder where comes the first
Name physical file which was used to build this logical file
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 108
The purpose of this grid is to have an overview on specific OTCell metrics extracted
from the Nbap Common Measurement message.
Column Description
RncCellId Identifier of the primary/reference cell. Format: RNC ID Cell ID
(Scrambling Code if known)
Name Nbap UL RSSI (Rx Total Wide Band Power) in dB
Nbap Tx Carrier Power in %
Nbap Tx Carrier Power Not HSDPA in %
Samples Number of samples (messages with this metric)
Min Minimum
Average Average
Std Deviation Standard Deviation
Max Maximum
50 th% 50 th percentile
90 th % 90 th percentile
The UL RSSI is analyzed per cell with the OTCell NBAP Common Measurement
Report messages. It is also called the Received Total Wide Band Power Value
The purpose of the analysis is to help the user to define potential issue like
Interference or Neighboring.
Column Description
RncCellId Identifier of the same cell. Format: RNC ID Cell ID (Scrambling Code if
known)
Min found (db) Smallest UL RSSI found for this cell (so to check regarding the minimum
defined by the user)
Min Used (db) Minimum used in the following columns. This minimum is the UlRssiMin
user parameter if not 0, else this minimum is the Min Found
Samples Ignored (%) Percentage of samples ignored, usually because the UL RSSI is smaller
than the minimum defined by the user
Samples Used Number of samples used (so not ignored) to compute the following
columns
Avg Delta (db) Average Delta between UL RSSI and the Minimum
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 110
# Delta >= 3 (%) Percentage of samples for which the delta is >= 3 dB
# Delta >= 6 (%) Percentage of samples for which the delta is >= 6 dB
# Value >= Avg (%) Percentage of samples for which the value is >= average UL RSSI
Comments The comment describes an advice based on the analysis of the different
percentage as defined thereafter
The purpose of this grid is to have an overview on specific Call Trace metrics extracted from
the Nbap Dedicated Measurement message.
Column Description
CellId Identifier of the cell in the rnc
Name Nbap Tx Code Power (dB)
Nbap SIR (dB)
Nbap Best Cell UL SIR (dB)
Samples Number of samples (messages with this metric)
Min Minimum
Average Average
Std Deviation Standard Deviation
Max Maximum
50 th% 50 th percentile
90 th % 90 th percentile
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 112
The objective of this new report (view) is to display the occurrences of specific
couples message + cause.
This report (view) could be presented as a tree view with the following levels and
information:
For Professional Edition this report is calculated for calls currently selected in the
list of calls (refer to section 6.3.4 for details). When you change the list of selected
calls, you can recalculate the report using Refresh KPI button. If no calls are
selected, the report is calculated for all calls in the current database.
For Standard Edition this report is calculated for all calls from the selected
database. Refresh KPI button is not available in Standard Edition.
ALU 9358 RFO extracts messages from the input files and parses them for use in call
event analysis and for display in various modules. The Message View displays all
decoded messages from the active file.
To open the Message View, select a file from the Active File List for display. Next,
click the button from the toolbar, or select View->Message from the menu.
6.6.1 OVERVIEW
The Message View window consists of the top Summary pane and the bottom, Details
pane.
1
2
5
4
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 114
You can collapse message parts by clicking on Minus icon. The collapsed parts can
be expanded by clicking on Plus icon. If you click on minus (or plus) with CTRL key
press, all elements are collapsed (or expanded respectively).
By default, the Message View contains one message set - All Messages. This
message set cannot be deleted or modified.
Table 6-28 Message View, Usual Steps to Create New Message Set
1 Click Edit Message Sets button. Message Set editor window appears.
6 Click OK button.
Then this message set is available in the Message Sets combo box.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 116
6.6.3 SEARCHING
There are two kinds of the search in the Message View:
- Grid search to search in the Summary Grid.
- Message details search to search in the details of the selected message.
1
2 5 4
3
2
5
4
3
6.6.4 COLOR-CODING
In the summary grid each message type can have its own color. Right click on the
selected message to assign color for a message. Drop-down context menu appears.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 118
Note: You cant sort items in Message View because it is already sorted by time
stamp.
The Message Flow Diagram displays network directions of all decoded messages from
the active file.
To open the Message Flow Diagram, select a file from the Active File List to display.
Next, click the button from the toolbar, or select View->Message Flow
from the menu.
6.7.1 OVERVIEW
The Message Flow Diagram window consists of the top Message Direction pane and
the bottom, Message Details pane.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 120
You can use the Message Sets Editor and search messages just like using Message
View. For detailed information about it refer to 6.4.2 and 6.4.3 sections of this
document.
The Grid View displays parameters from the active file in the grid format. You may
choose parameters to be displayed in a grid. The Grid View is synchronized.
Note: The first time you open the Grid View after a new installation, it will be
empty, and you will need to choose parameters for display using the Grid Options.
To open the Grid View, choose a file from the active File List for display, then click
the Grid View Button on the toolbar, or choose View > Grid from the menu.
6.8.1 OVERVIEW
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 122
Metrics Selector.
Save.
Toggle bookmark
Go to previous bookmark
Go to next bookmark
When a set is chosen on the Grid View toolbar, parameters configured for that set
are displayed in the grid area.
To change which parameters are to be displayed for a set, press Metrics selector
button on the toolbar:
1 Parameter set
2 Parameters
Select a set from the Parameter Set listbox. Check boxes for parameters, which
you want to display in that set, then press OK.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 124
To open the Graph View, choose a file from the Active File List for display, then
click the Graph View button from the toolbar, or choose View > Graph from the
menu. Also the Graph View can be opened from the Grid View.
Note: The first time you open the Graph View after a new installation, it will be
empty, and you will need to choose parameters for display using the Graph Options.
When you position your mouse over items displayed in the legend, each item will
display a graph for that item only.
6.9.1 OVERVIEW
2
3
Metrics Selector.
Print graph.
Graph type.
Axes settings.
Constant lines.
Zoom in.
Previous zoom.
Next zoom.
Autosize graphs
3
Legend.
4
Data table.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 126
When a set is chosen on the Graph View toolbar, graphs are displayed for
parameters configured for that set.
To change which parameters are to be displayed for a set, select the set from the
list box on the toolbar, then press Metrics Selector button:
Select a parameter for X Axis, select a set of parameters for Y Axis, and then press
OK.
To switch to this mode of display, click the Graph Mode button on the toolbar. The
first time, the window will go blank, waiting for you to choose a parameter from the
Graph Options.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 128
You can switch between modes pressing the Simple/Multi Graph button as
described in section 6.9.2
In Single Statistical mode the view displays one or more statistical functions for one
metric. To select metric for x-axis and functions for y-axis press Metrics Selector
button on the toolbar
1 2
Select a metric for X axis, select functions for Y axis, then press OK.
In Multi Statistics mode the view displays statistic functions for multiple metrics
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 130
To select metrics for x-axis and functions for y-axis press Metrics Selector button on the toolbar
Select a metrics for X axis, select functions for Y axis, then press OK.
The selection of metrics for X axis in this mode is the same as the selection of
metrics for Y axis in Normal mode. If you change the selection in one mode, it is
automatically changed in another. Also note that the metric chosen for X axis in
Normal mode can not be selected for X axis in Statistics mode.
The selection of statistical functions is the same for both Single and Multi modes.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 132
6.9.5 FILTERING
Filtering allows you to display data in the Graph View by filtering of the data using
specific criteria.
The parameter list appears on the left side. There you can choose already
2
created filters for parameters or not created (seems disabled) filters, also you
can make active already existent filters.
On the right side you can change, create, modify or clear current parameter
3
filter criteria.
Enter up to two filter criteria per parameter. To clear a filter, click on the
parameter and click Clear Filter. To clear all filters, click the Clear All Filters
button.
4 When you click OK button, filters for selected parameters will be saved and the
Graph View will update to display data based on your filters.
6.9.6 ZOOMING
You can scale the displayed graph by any axe (or both).
Hold the left mouse button and draw a rectangle over the graph:
When you release the mouse button, the graph view displays the zoomed area you
drown:
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 134
6.9.7 EXPORT
The data displayed in the Graph view can be exported in the text or bitmap (BMP)
format. Press Save Data button on the toolbar:
Specify the file name and the destination directory, and then press Save button.
6.10. SYNCHRONIZATION
Several views may be open in parallel, it can be several views of the same kind
(several Graph views, for example) or of different kind (a Graph, a Message view).
The synchronization is based on the timestamp. If you select data in one view, the
data with the same timestamp (or the closest one) in all other synchronized views is
selected:
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 136
Each view may be unsynchronized; in that case this window doesnt change if
another timestamp is chosen in another synchronized view, or if another logical file
is chosen in the active file list. Press button on the window toolbar to make it
synchronized/unsynchronized.
Warning: all opened views will be closed after pressing the button.
As a result all opened views are updated for that selected file.
In the multi-file synchronization mode, choosing another file from Active File List
will not replace any opened views.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 138
6.11.1 BOOKMARKING
Use bookmarks to mark rows in the file so that you can skip through the file.
- bookmarks toolbar.
Toggle Bookmark
To bookmark a row, click on the row header to select it, and then click Toggle
Bookmark. The bookmark indicator will appear in the row header. To remove a
single bookmark, highlight the row and click the Toggle Bookmark button again.
- Previous Bookmark
Use the Previous Bookmark button to skip back to the previous bookmark in the file.
- Next Bookmark
Use the Next Bookmark button to skip forward in the file to the next bookmark.
Clear Bookmarks
Use the Clear Bookmarks button to clear all bookmarks in the file.
6.11.2 FILTERING
Filtering allows you to display the data that matches certain criteria. It is available
for any view which presents its data as a grid Grid View, Message View and KPI.
2 Click button on the header of the column which you want to set a filter on
The custom filter allows you to specify a filter combined from two conditions.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 140
The status bar below the grid displays information about the currently applied filter:
You can:
If you click on a logical operand (highlighted in red), the following menu appears:
You can:
- select a logical operand
- add a group of conditions linked by another logical operand
- add a condition for the operand (it also can be done by pressing Plus button
left to the operand)
- clear all conditions
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 142
When you finish filter creation, press OK. You can apply the filter by pressing
Apply button.
6.11.3 AGGREGATION
Aggregation operations are available for grid columns. It is applicable to Grid View,
KPI and Report View. The following operation can be performed:
- sum calculation
- min value calculation
- max value calculation
- average value calculation
- count the number on records
Select the desired operation for the column. The result is displayed in the area in
the column.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 144
6.11.4 EXPORT
Graph view
The data displayed in the Graph View can be exported in the text format or bitmap
format.
Specify the file name and the destination directory. Select file type Text file to
save as text or Bitmap file to save as picture. Then press Save button.
The text file contains coordinates of points which the graphs are build from. Here is
an example of exported file:
RSCP-1 (RRC) dBmCCDFCDFPDF
-76.0050-76.0050-76.0050-76.001
-68.000-68.00100-68.0050-68.001
The bitmap file is a picture showing a graph. Here is an example of exported file:
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 146
Note that in Multi Graph mode ALU 9358 RFO saves each graph in a separate bitmap
file.
Grid view
The data displayed in the Grid View can be exported in the text format
Specify the file name and the destination directory. Then press Save button.
The text file contains the table displayed by grid view. The columns are separated
by spaces. Here is an example of exported file:
TimeStampEcIo-1 (RRC) dBEcIo-2 (RRC) dBEcIo-3 (RRC) dB
03-27-2009 11:11:58.000-6.500-9.500-24.500
03-27-2009 11:11:59.000-7.500-16.000
03-27-2009 11:12:01.000-6.000-7.500
03-27-2009 11:12:02.000-7.000-9.500
Message view
The data displayed in the Message View can be exported in text format.
In this case ALU 9358 RFO will export only data for the selected rows. Otherwise, it
will export all rows.
ALU 9358 RFO asks if you wish to export all message data or message summaries
only:
Select the desired export type. If you select Summary mode, ALU 9358 RFO exports
only the top grid, if you select Details mode, ALU 9358 RFO exports the top grid and
decoded data for each message. Press Save button.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 148
Specify the file name and the destination directory. Then press Save button.
----------------------------------------------------------------------
------------------------------
----------------------------------------------------------------------
------------------------------
----------------------------------------------------------------------
------------------------------
RncCellId >>
----------------------------------------------------------------------
------------------------------
frequencyInfo = 10786
Cell = 65535{
cellType = UNKNOWN
psc = 137
cpen = -60
cprp = -95
Cell = 65535{
cellType = UNKNOWN
psc = 136
cpen = -75
cprp = -99
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 150
Message Flow
The data displayed in the Message Flow View can be exported in text format.
Specify the file name and the destination directory. Then press Save button.
The text file contains the list of nodes and messages sent between them. Here is an
example of exported file:
Call Trace Time UE NodeB RNC Core
03-24-2009 06:13:45.306Nbap | Iub Radio Link Setup Request Nbap | Iub
03-24-2009 06:13:45.349Nbap | Iub Radio link Setup Response Nbap | Iub
03-24-2009 06:13:45.382Rrc | CCCH RRC Connection Setup Rrc | CCCH
03-24-2009 06:13:45.655Nbap | Iub Radio Link Restore Indication Nbap |
Iub
03-24-2009 06:13:45.703Rrc | DCCH RRC Connection Setup Complete Rrc |
DCCH
03-24-2009 06:13:45.712Rrc | DCCH Measurement Control Rrc | DCCH
03-24-2009 06:13:45.712Rrc | DCCH Measurement Control Rrc | DCCH
03-24-2009 06:13:45.712Rrc | DCCH Measurement Control Rrc | DCCH
03-24-2009 06:13:45.713Rrc | DCCH Measurement Control Rrc | DCCH
03-24-2009 06:13:45.713Rrc | DCCH Measurement Control Rrc | DCCH
KPI
The data displayed in KPI can be exported in text format.
Specify the file name and the destination directory. Then press Save button.
Here is an example of exported file:
2 70--1358780993 2 .xmlCallTrace191No0.000D:\Traces\RADIO
LINK RECONFIGURATION\Copy of RNCCN-RNC_BB70.033610+0200.xml
3 46-2315528308 3 .xmlCallTrace811No0.000D:\Traces\RADIO
LINK RECONFIGURATION\RNCCN-LYONTRIO1.121133+0100.xml
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 152
4 46-2315323832 4 .xmlCallTrace811No0.000D:\Traces\RADIO
LINK RECONFIGURATION\RNCCN-LYONTRIO1.123203+0100.xml
5 46-2315562949 5 .xmlCallTrace811No0.000D:\Traces\RADIO
LINK RECONFIGURATION\RNCCN-LYONTRIO1.125338+0100.xml
6 46-2315328150 6 .xmlCallTrace811No0.000D:\Traces\RADIO
LINK RECONFIGURATION\RNCCN-LYONTRIO1.134820+0100.xml
You can rearrange opened windows for your convenience using Windows menu. You
can arrange them as a cascade, as horizontal tiles or vertical tiles.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 154
7. MISCELLANEOUS
To start the tool, select Tools > One Shot Hexa Decoding Tool from the menu or
press button on the toolbar.
4
2 5
3
To start the tool, select File > Decompress Files (.gz) from the menu or press
button on the toolbar.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 156
Select a directory and press OK. The ALU 9358 RFO decompresses all files from the
selected directory and its subdirectories. The compressed files are replaced with
their decompressed versions.
To start the tool, select File > Message Export from the menu or press
Export can be performed for all loaded calls or for calls from current list of calls.
Select the desired export type. Refer to section 6.11.4 Export from Message View
for details about export types.
Select a directory and press OK. The ALU 9358 RFO exports all messages data from
selected calls into selected directory. The result files have following naming:
<Call>_summary.txt or <Call>_details.txt.
For example:
5--620602936 1_details.txt
5--620602936 1_summary.txt
Refer to section 6.11.4 Export from Message View for details about files format.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 158
The log window displays event which occur during the use of the ALU 9358 RFO. The
events are divided into categories:
- errors
- warnings
- information
- Shows/hides errors
- Shows/hides warnings
Toggle bookmark
Go to previous bookmark
Go to next bookmark
2 Message area.
7.6. HELP
7.6.1 CONTENTS
Contents consists of information about User Manual document.
7.6.2 ABOUT
To open the About window, select Help > About ALU 9358 RFO from the menu.
The window displays UTRAN Access release version support and ALU 9358 RFO
version.
Figure 7-9 About ALU 9358 RFO Window
Note: ALU 9358 RFO Version number shown in the screenshot is given as an example
only and changes from version to version.
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 160
8. TROUBLESHOOTING
This section describes known issues and possible ways to solve them.
3. In the Log On As column you will find the Log On As account of SQL
Server (UMTS_RFO) Windows service.
4. In the Log On As column you will find the account of SQL Server
(UMTS_RFO) Windows service.
5. Right-click the folder you want to use as File Location option in ALU 9358
RFO, and then click Properties.
9.1. ABBREVIATIONS
ALU Alcatel - Lucent
PI Performance Indicator
(statistic function)
function)
PDF Probability Density Function (statistic function)
CT Call Trace
IN Interface Node
RRC Radio Resource Control
9.2. DEFINITIONS
Physical File XML trace file that came from an RNC.
END OF DOCUMENT
Copyright 2003-2010 Alcatel-Lucent Alcatel-Lucent 9358 Radio Frequency Optimizer - User Manual
Alcatel-Lucent Confidential 162
ALCATEL-LUCENT CONFIDENTIAL
UNCONTROLLED COPY: The master of this document is stored on an electronic database and is write
protected; it may be altered only by authorized persons. While copies may be printed, it is not recommended.
Viewing of the master electronically ensures access to the current issue. Any hardcopies taken must be
regarded as uncontrolled copies.
ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property of Alcatel-Lucent.
Except as expressly authorized in writing by Alcatel-Lucent, the holder shall keep all information contained
herein confidential, shall disclose the information only to its employees with a need to know, and shall protect
the information from disclosure and dissemination to third parties. Except as expressly authorized in writing
by Alcatel-Lucent, the holder is granted no rights to use the information contained herein. If you have
received this document in error, please notify the sender and destroy it immediately.