Escolar Documentos
Profissional Documentos
Cultura Documentos
Boomer L1 D
Equipped with COP1638HD+, COP1838HD+ or COP 2238HD+ rock drill
Coverage area up to 64 m2
www.atlascopco.com
L1 D
Standard features
Rock drill Control system
COP 1638HD+, COP 1838HD+ or COP 2238HD+ rock drill Hydraulically controlled drilling system which incorporates
with dual-damping system for optimal drill consumable life the anti-jamming function Rotation Pressure Controlled Feed
Pressurized housing and mating surfaces to reduce internal (RPCF)
contamination of the rock drill
Carrier
Hydraulic boom Sturdy, articulated carrier with four-wheel drive
BUT 35 heavy-duty boom with double tripod suspension for Four jacks for stable set-up
accurate hydraulic parallel holding in all directions
General
Hydraulic feed FOPS-approved telescopic protective roof
BMH 6800-series heavy-duty aluminium feed with high Hydraulically driven water booster pump
bending and torsional resistance for maximum durability Cable reel
Snap-on stainless steel sleeves and polymer contacts Working lights
Boomer L1 D with COP 1638HD+, COP 1838HD+ or COP 2238HD+
Specifications
ROCK DRILL Electrical system
COP COP COP
1638HD+ 1838HD+ 2238HD+ Total installed power..................................................... 83 kW
Shank adapter R32/R38/T38 R32/R38/T38 R32/R38/T38
Main motors, Sf 1.15..................................................1x75 kW
Voltage..................................................................4001 000 V
Height over drill centre 88 mm 88 mm 88 mm
Frequency..................................................................5060 Hz
Length without shank 1 008 mm 1 008 mm 1 008 mm Starting method.................................... star/delta (400700 V)
Impact power 16 kW 18 kW 22 kW Electronic overload protection for electric motors
Impact rate 60 Hz 60 Hz 73 Hz Percussion hour meter on operator display
Hydraulic pressure 200 bar 230 bar 250 bar Digital voltmeter/amperage meter in electric cabinet
Rotation system Separate rotation Separate rotation Separate rotation Phase sequence indicator
Rotation speed 0340 rpm 0340 rpm 0340 rpm Earth fault indicator
Battery charger
Rotation torque 4401 000 Nm 6401 000 Nm 6401 000 Nm
Transformer.....................................................................8 kVA
Lub. air consump. at 2 bar 57 l/s 5 l/s 5 l/s
Cable reel, diameter................................................. 1 600 mm
Water consumption 35120 l/m 40120 l/m 50120 l/m Dual controls for cable reel
Weight 173 kg 170 kg 174 kg
Sound level <106 dB(A) <106 dB(A) <106 dB(A)
Hydraulic system
FEED Hydraulic pumps.............................................................. 1 unit
Pumps unloaded at start
BMH 6800 BMH 6812 BMH 6814 BMH 6816 BMH 6818 BMH 6820
System pressure, max.............................................150240 bar
Hydraulic oil tank, volume max/min......................... 255/170 l
Total length 5 287 mm 5 882 mm 6 502 mm 7 102 mm 7 677 mm Low oil level indicator
Drill steel length 3 700 mm 4 310 mm 4 920 mm 5 530 mm 6 100 mm Oil temperature gauge on oil tank
Hole depth 3 443 mm 4 043 mm 4 668 mm 5 268 mm 5 843 mm Electrical oil filling pump
Weight, incl. drill 601 kg 631 kg 665 kg 696 kg 721 kg Oil filter indicator
Feed force 20.0 kN 22.0 kN 22.0 kN 22.0 kN 22.0 kN Water cooled oil
Filtration.......................................................................... 16 m
Mineral hydraulic oil
Boom
Boom.........................................................................BUT 35G Carrier
Feed extension.......................................................... 1 800 mm
Deutz 4-cylinder, TCD 2013 L04, EPA III/COM III (Tier 3/
Boom extension........................................................ 1 600 mm
Stage IIIA) approved 4-stroke prechamber diesel engine
Parallel holding..........................................................complete
Power rating at 2 300 rpm............................. 120 kW (160 hp)
Feed roll-over.................................................................... 360
Torque at 1 600 rpm.....................................................618 Nm
Max. lifting angle...................................................... +70/-45
Articulated steering................................... 41 steering angle
Max. swinging angle.........................................................45
Four-wheel drive
Weight, boom only......................................................2 860 kg
Hydrostatic power steering system
Hydrodynamic transmission..................................Clark 24000
Front axle........................................................... Dana 123/127
Air system Rear axle ..................................Dana 123/127, 8 oscillation
Automatic differential lock on front axle, limited slip
Hydraulically driven screw compressor.... Atlas Copco GAR 5 Tyres........................................................................12.00xR24
Capacity, max at 7 bar.......................................................20 l/s Clearance outside axles............................... 13 rear, 22 front
Adjustable speed Hydraulic jacks, front . ........................................ 2 extendable
Air pressure gauge Hydraulic jacks, rear...............................................................2
Service brakes..............................................2 separate circuits
Emergency and parking brakes......................................SAHR
Fuel tank, volume............................................................. 100 l
Water system Exhaust catalyser
Silencer
Hydraulically driven water booster pump........Flygt PXR411H Electric system..................................................................24 V
Water booster pump max capacity at 15 bar.............. 250 l/min Batteries.............................................................2x12V, 125 Ah
Min water inlet pressure at 200 l/min, ..............................2 bar Tramming lights......6 x 40 W LED + 2 x 70 W halogen, 24 V
Water pressure gauge Working lights..................................4 x 80 W LED, 24 V DC
Brake lights
Illuminated stairs
Fire extinguisher
Central lubrication system
Spirit level....................one for longitudinal, one for sideways
Gradeability at max. load on drive wheels.......................... 1:4
Horn, beacon and reverse alarm
Shelf for drill bits and tools
Boomer L1 D with COP 1638HD+, COP 1838HD+ or COP 2238HD+
DRIFTER RODS SHANK ADAPTERS
Dimension Min. hole diameter Thread Diameter Length
SR35-R39-T38 45
COUPLINGS
R32-R39-T38 45
Thread Diameter Length
SR35-R39-T38 Speedrod 45
mm R38 55 170
T38 55 190
EXTENSION RODS FOR INJECTION DRILLING/RAS
Dimension Min. hole diameter
mm Rnd 32 Speedrod 51
Rnd 38 Speedrod 64
Optional equipment
Rock drill/Drilling system
Water mist flushing, external water and air supply Water system
External air supply connection for hole blowing kit Water hose reel (incl. water hose)
Hole blowing kit with 80 l air receiver Water flow guard, flushing water
www.atlascopco.com
brochure may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
3044
Copyright 2013, Atlas Copco Rock Drills AB, rebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos in this
2203
1953
L1 D
COVERAGE AREA
8273
2041
200
1312
2245
2696
9555
10131
Height roof up/down 3 019/2 303 3 091/2 375 Operator sound pressure level working close to 1046 dB(A) re 20uPa
machine, drilling, free field
Length with BMH 6814 feeds 14 232 14 350
Sound power level (ISO 3744), drilling, free field 128 dB(A) re 1pW
Ground clearance 260 273
Vibration levels seated, drilling (ISO 2631-1) 0.07 0.07 m/s^2
Turning radius inner/outer 3 700/6 600 4 800/8 200 Vibration levels standing, drilling (ISO 2631-1) 0.070.07 m/s^2