Escolar Documentos
Profissional Documentos
Cultura Documentos
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
The American Society of
Mechanical Enlineen
A N
A M E R I C A N
N A T I O N A L
S T A N D A R D
ASME B36.1OM-2000
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
Date of Issuance: March 15, 2001
This Standard will be revised when the Society approves the issuance of
a new edition. There will be no addenda or written interpretations of the
requirements of this Standard issued to this edition.
This code or standard was developed under procedures accredited as meeting thecriteria for
American National Standards. The Consensus Committee that approved the code or standard
was balanced to assure that individuals from competent andconcerned interests have had an
opportunity toparticipate. The proposed code or standard was made available for public review
and comment that provides an opportunity for additional public input from industry, academia,
regulatory agencies, and the public-at-large.
ASME does not "approve," "rate," or "endorse" any item, construction, proprietary device,
or activity.
ASME does not take any position with respect to the validity of any patent rights asserted in
connection with any items mentioned in this document, and does not undertake to insure anyone
utilizing a standard againstliability for infringement of any applicable letters patent, nor assume
any such liability. Users of a code or standard are expressly advised that the determination of
the validity of any such patent rights, andthe risk of infringement of such rights, is entirely their
own responsibility.
Participation by federal agency representative(s) or person(s) affiliated with industry is not to
be interpreted as government or industry endorsement of this code or standard.
ASME accepts responsibility for only those interpretations of this document issued in
accordance with the established ASME procedures and policies, which precludes the issuance
of interpretations by individuals.
Copyright O 2001 by
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All Rights Reserved
Printed in U.S.A.
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
S T D - A S M E B 3 b - L O M - E N G L 2000 m 0757b70 Ob21734 785 M
...
111
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
demand and production of pipe to these traditional dimensionsis undiminished. Consequently,
in responseto a demandfromusers,acceptedpractice for dimensionsandweightsof
commercialwroughtsteelandweldedwroughtironpipewereadded.Thesechangeswere
designated an AmericanStandardonFebruary23,1950.
SubcommitteeNo. 1 was reorganized in 1957. In additiontonecessaryeditorialchanges,
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
iv
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
ASME STANDARDS COMMITTEE B32
Metal and Metal Alloy
Wrought Mill Product Nominal Sizes
of the Committea at the time of approval of this Standard.)
(The following is the roster
OFFICERS
J. A. Gruber, Ph.D., Chair
S. D. Weinman, Secretary
COMMITTEE PERSONNEL
F. M. Christensen, F. M. Christensen Metallurgical Consultant, Inc.
A. Cohen, Arthur Cohen & Associates
J. A. Gruber, Ph.D., Wheatland Tube Co.
W.N. Hotliday, L W Steel Co.
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
CONTENTS
scope ................................................................................ 1
Size .................................................................................. 1
Materials ............................................................................. 1
Wall Thickness ....................................................................... 1
Weights .............................................................................. 1
Permissible
Variations ................................................................. 1
Pipe Threads .......................................................................... 1
Wall Thickness
Designations ........................................................... 2
Wall Thickness
Selection .............................................................. 2
Table
1 Dimensions and Weights of Welded and Seamless Wrought Steel
Pipe ................... 3
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
vii
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
WELDED AND SEAMLESS WROUGHT STEEL PIPE
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
1 SCOPE Thenominalplainendweight, in poundsper foot,
is calculated usingthefollowingformula:
ThisStandardcoversthe standardization of dimen-
sions ofweldedandseamlesswroughtsteelpipe for
W $ = 10.69(0- t)t
high or lowtemperaturesand pressures.
Theword pipe isused as distinguished from rube
toapplyto tubular products of dimensions commonly where
used for pipeline andpiping systems. PipeNPS12 Wpe= nominalplainendweightroundedtothe
(DN 300) andsmallerhave outside diametersnumeri- nearest 0.01 lb/ft
cally larger than their corresponding sizes. In contrast, D = outside diameter to the nearest 0.001 in. (the
the outside diameters of tubes are numerically identical symbol D is to beused for ODonly in
tothe size number for all sizes. mathematicalequations or formulas)
t = specified wall thickness rounded to thenear-
est 0.001 in.
2 SIZE The nominal plain end mass, in kilograms per meter,
is calculated using the following formula:
The size ofallpipeisidentifiedbythenominal
pipe size.
The
manufacture of pipe NPS (DN 6) to
NPS Wpr = 0.0246615(0 - t ) t
12 (DN 300) inclusive is basedon a standardized
outside diameter (OD). This OD was originally selected where
so thatpipewith a standardODandhaving a wall Wpe = nominalplainendweightroundedto the
thicknessthatwastypicalof the periodwouldhave nearest 0.01 kg/ m
an insidediameter (ID) approximatelyequal to the D = outside diametertothe nearest 0.1mm for
nominal size. Although there is no such relation between outside diameters that are 16 in. (406.4 mm)
the existing standard thickness - ODandnominal andsmallerand to the nearest 1.0 mm for
size - these nominal sizes and standard ODs continue outside diameters larger than16 in. (406.4
in use as "standard." mm) (the symbol D istobeused for OD
Themanufacture ofpipeNPS14(DN 350) and only in mathematical equations or formulas)
t = specified wall thickness roundedtothenear-
largerproceedsonthebasis ofanODcorresponding
tothenominal size. est 0.01 mm
6 PERMISSIBLE VARIATIONS
3 MATERIALS
The
dimensional standards for pipe
described
here
Variations in dimensions differ depending upon the
methodofmanufactureemployed in making the pipe
are for productscovered in ASTM specifications.
to the various specifications available. Permissible varia-
tions for dimensions are indicated in each specification.
4 WALLTHICKNESS
Thenominalwall thicknesses are given in Table1. 7 PIPE T I - " X
Unlessotherwise specified, thethreadsofthreaded
pipe shall conform to ANSI/ASME B 1.20.1, Pipe
5 WEIGHTS
Threads,GeneralPurpose (Inch).
Thenominal
weights of steel
pipe are calculated Schedules 5 and 10 wall thicknesses do not permit
values
and are tabulated in Table 1. threading in accordance
with
ANSVASME B1.20.1.
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
S T D - A S M E B3b.LO"ENGL 2000 0757b70 Ob21737 2b7 W
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
'/2 in. (12.70 mm)wall thicknesses. for Pressure Piping, or other similar codes, whichever
Pipe of sizes andwall thicknesses other thanthose governs the construction. A thickness shallbe selected
of Standard, Extra-Strong, andDouble Extra-Strong, fromTable 1 to suit the valuecomputed to fulfill the
and Schedule Number were adopted from API Specifi- conditions for which the pipe is desired.
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
WELDED AND
WROUGHT
SEAMLESS PIPE STEEL ASME B36.10M-2000
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
WELDED
B36.10M-2000
ASME AND
WROUGHT
SEAMLESS PIPE STEEL
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
WELDED
STEEL
AND
WROUGHT
SEAMLESS PIPE ASME B36.10M-2000
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
4.500 0.125 5.85 ... ... 1 O0 1 14.3 3.18 8.71
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
B36.10M-2000
ASME WELDED AND
WROUGHT
SEAMLESS PIPE STEEL
5 5.563
15.87 0.281 ... ... 125 141.3 7.14 23.62
17.51 0.312
5 5.563 ... ... 125 141.3 7.92 26.05
19.19
5 0.344 5.563 ... ... 125 141.3 8.74 28.57
20.80 0.375
5 5.563 xs 125 80 141.3 9.53 30.97
27.06 0.500
5 5.563 40.28 12.70 141.3... 125 120
32.99 0.625
5 5.563 49.12 15.88 141.3. . . 125 160
38.59 0.750
5 5.563 xxs
57.43 19.05 ...
141.3 125
45.39 0.719
6 6.625 67.57 18.26 168.3. . . 150 160
47.10 0.750
6 6.625 ...
70.12 19.05 ...
168.3 150
53.21 0.864
6 6.625 xxs
79.22 21.95 ...
168.3 150
53.78 0.875
6 6.625 80.08 ... 22.23 ...
168.3 150
24.72 0.277
8 8.625 36.82... 7.04 219.1
30 200
27.73 8
0.312 8.625 41.25 ... 7.92 ...
219.1 200
28.58 80.322
, 8.625 42.55 8.18 STD
219.1 200 40
8 8.625 0.344 30.45 45.34. . . 8.74 ...
219.1 200
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
WELDED AND
WROUGHT
SEAMLESS PIPE STEEL ASME B36.1OM-2000
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
S T D * A S M E B3b.LOM-ENGL 2000 m 0757b70 Ob21745
5b0
WELDED
636.10M-2000
ASME AND SEAMLESS
STEEL
WROUGHT PIPE
[Note (111
in. in. lblft Strong (XXS)I No.
[Note (211 mm kglm mm
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
WELDED
STEEL
AND
WROUGHT
SEAMLESS PIPE ASME B36.10M-2000
9
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
ASME B36.10M-2000 WELDED AND SEAMLESS WROUGHT STEEL PIPE
10
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
STD-ASME B3b-LOM-ENGL
11
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
WELDED
B36.10M-2000
ASME AND SEAMLESS WROUGHT STEEL PIPE
55.42
24 0.21824.000 ... 600 5 61O 5.54 82.58
63.47 24
0.250 24.000 ... 600 10 61O 6.35 94.53
0.281 24.000 24 ... ... 600 610 7.14 106.15
0.31 24.000 24 2 79.01 ... ... 600 610 7.92 117.60
12
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
S T D - A S M E B 3 b - L O M - E N G L 2000 D 0759b70 Ob21950 928 m
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
26.000 26 0.875 235.01 660 22.23 349.64
26 26.000 0.938 251.30 ... ... ... 660 23.83 373.87
26.000 26 1.000 267.25 ... ... ... 660 25.40 397.51
13
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
STDOASME B 3 b - L O H - E N G L 2000 W 0 7 5 7 b 7 0 Ob21752 Bblf m
Outside Wall
Plain
End Extra-Strong (XSI . End Plain Wall Outside
Diameter.
NPS Thickness. Weight . or Double
Extra
Schedule DN Diameter.
Thickness . Mass .
[Note (1)I in. in. lblft Strong (XXS)I No. [Note (211 mm kg/m
mm
126.78 0.375
32 32.000 STD ... 800 813 188.839.53
32 32.000 0.406 137.12 ... ... 800 813 10.31 204.09
32 32.000 0.438 147.78 ... ... 800 813 11.13 220.10
32.000 32 0.469 158.08 ... ... 800 813 11.91 235.29
14
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
S T D - A S M E B3b.LOM-ENGL 2000 m 0759b70 Ob2L952 7T0 m
WELDEDSTEEL
AND
WROUGHT
SEAMLESS PIPE ASME B36.10M-2000
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
ASME 836.1OM-2000 WELDED AND SEAMLESS WROUGHT STEEL PIPE
16
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
S T D * A S M E B3b.LOM-ENGL 2000 0757b70 Ob21754 573 D
WELDED AND
WROUGHT
SEAMLESS PIPE STEEL ASME B36.10M-2000
Outrido W d PhinEnd
Schodulo ON Diamotor, Thlcknou. Mur.
No.
[Noto (2I1 mm mm kdm
42 42O
. oo 1.188 518.30 ... ... ... 1067 30.18 771.69
42 42O
. oo 1.250 544.52 ... ... ... 1067 31.75 810.80
44 44O
. oO 0.344 160.54 ... ... 100 1 1118 8.74 239.09
44 44.Ooo 0.375 174.80 STO ... 100 1 1118 9.53 260.52
44 44.Ooo 0.406 189.20 ... ... 100 1 1118 10.31 281.64
44 44.m 0.438 203.97 ... ... 1 100 1118 11.13 303.82
46 46O
. Oo 0.344 167.89 ... ... ... 1168 8.74 249.87
46 46O
. oo 0.375 182.90 STD ... ... 1 168 9.53 272.27
46 46.Ooo 0.406 197.88 ... ... ... 1 168 10.31 294.35
46 46O
. oo 0.438 213.33 ... ... ... 1168 11.13 317.54
46 46
O
. oo 1.o00 481.O5 ... ... ... 1168 25.40 715.73
46 46O
. oo 1.o62 510.17 ... ... ... 1 168 26.97 758.92
46 46O
. oo 1.125 539.68 ... ... ... 1168 28.58 803.09
46 46O
. oo 1.188 569.10 ... ... ... 1 168 30.18 846.86
46 46O
. oo 1.250 597.97 ... . f . ... 1168 31.75 889.69
48 48.Ooo 0.344 175.25 ... ... 200 1 1219 8.74 260.86
48 48O
. oo 0.375 190.92 STD ... 200 1 1219 9.53 284.25
48 48.Ooo 0.406 206.56 ... ... 200 1 1219 10.31 307.32
48 48.Ooo 0.438 222.70 ... ... 200 1 1 219 11.13 331.54
17
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
ASME B36.10~-2000 WELDED AND SEAMLESS WROUGHT
PIPE STEEL
48 48.000 0.688 347.97 ... ... ' 1200 1219 17.48 517.95
48 48.000 0.750 ...378.83 ... 1200 1219 19.05 563.74
48 48.000 0.812 409.61 ... ... 1200 1219 20.62 609.40
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
48 48.000 0.875 440.80 ... ... 1200 1219 22.23 656.10
48.000 48 0.938 471.90 ... ... 1200 1219 23.83 702.38
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
S T D *ASME
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
SEAMLESS
WELDED AND PIPE
WROUGHT STEEL ASME B36.10M-2000
630.71
1.000
60.000 60 ... ... 1500 1524 25.40 938.73
669.11 601.062 60.000 ... ... 1 500 1 524 26.97 995.71
60708.05
1.125
60.000 ... ... 1500 1524 28.58 1 054.01
746.90 601.188 60.000 ... ... 1 500 1 524 30.18 1111.83
60 60.000
785.05 1.250 ... ... 500 1 1 524 31.75 1 168.44
19
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
ASME B36.10M-2000 WELDED AND SEAMLESS WROUGHT STEEL PIPE
20
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
c
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
WELDED AND
WROUGHT
SEAMLESS STEEL PIPE 836.10M-2000
ASME
TABLE 1 DIMENSIONSANDWEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Identification
Customary Units SI Units
[Standard (STD),
Outride Wall Plain
End Extra-Strong (XS), Outside
Wall End
Plain
NPS Diameter, Thickness,Weight, or Double Extra Schedule DN Dlameter, Thickness, Mass,
[Note (111 in. in. lblft Strong (XXS)] No. [Note lZ)l mm mm kglm
80.000 80 1.062 896.17 ... ... 2000 2 032 26.97 1 333.59
80 80.000 1.125 948.57 ... ... 2000 2 032 28.58 1 412.06
80 80.000 1.188 1,000.89 ... ... 2000 2 032 30.18 1 489.92
52.30
1.25080.000 80 ... ... 2000 2 032 31.75 1 566.20
NOTES:
(1) NPS (Nominal Pipe Size) is a dimensionless designator that has been substituted in the customary units section for the
previous term Inch Nominal Size.
(2) DN (Nominal Diameter) is a dimensionless designator used in the SI (metric) system to describe pipe size.
21
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
AMERICAN NATIONAL STANDARDS FOR PRODUCT SIZES
Preferred Thicknesses for Uncoated Thin Flat Metals (Under 0.250 ln.). . B32.1-1952(R1994)
Preferred Diameters for Round Wire - 0.500 Inches and Under ........ B32.2-1969(R1994)
Preferred Metric Sizes for Flat Metal Products.. ...................... 832.3M-l984(R1994)
Preferred Metric Sizes for Round, Square, Rectangle and Hexagon
Metal Products .................................................... B32.4M-l980(R1994)
Preferred Metric Sizes for Tubular Metal Products Other Than Pipe.. ... B32.5-1977(R1994)
Preferred Metric Equivalents of Inch Sizes for Tubular Metal Products
Other Than Pipe., ................................................. B32.6M-l984(R1994)
Welded and Seamless Wrought Steel Pipe.. ............................... .B36.10M-2000
Stainless Steel Pipe.. ............................................... B36.19M-l985(R1994)
The ASME Publications Catalog shows a complete list of all the Standards published by the
Society. For a complimentary catalog, or the latest information about our publications, call
1-800-THE-ASME (1-800-843-2763).
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
ASME Services
ASME is committed to developing and delivering technical information. At ASME's Information Central. we make
every effort to answer your questions and expedite your orders. Our representatives are ready to assist youinthe
following areas:
There are four options for making inquiries* or placing orders. Simply mail, phone,fax, or E-mail us and an Information
Central representative will handle your request.
* Information Central staff are not permitted to answer inquiries about the technical content of this code or standard.
Infomation as to whether or not technical inquiries are issued to this code or standard is shown on the copyright
page. All technical inquiries must be submitted in writing to the staff secretary. Additional procedures for inquiries
may be listed within.
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.
--```,`,`,,,,,``,`,,``,,-`-`,,`,,`,`,,`---
COPYRIGHT 2003; American Society of Mechanical Engineers Document provided by IHS Licensee=Bechtel Corp/9999056100, User=, 06/24/2003
16:48:17 MDT Questions or comments about this message: please call the Document
Policy Management Group at 1-800-451-1584.