Você está na página 1de 3

PROGRAMMING MENU FROM KEYBOARD - 1

PERSONAL Cod. TECHNICAL Cod. USER


CODE
000000 111111

IN/OUT LINES IN/OUT LINES LINE NUM. [01]


MENU NAME LINE 01 Enter () = to change
Rh arrow to change input
Up arrow to choose function
IN/OUT LINES [ 01 ] Line 01
- = not programmed
TYPE O---- O = NO
C = NC
B = balanced
TELEPHONE TEL. NUMBER from [ 01 ] to [ 08 ] U = output
NUMBER MENU
A = answer confirm with #
OPT/TEL. 01 to 08 ABC B = direct access to vocal men
C = reset call cycle

The phone book with 200 numbers allows the user to enable
EXT NUMBER from [001] to [200] output 5, by sending out onlyone ring to the dialer.
IMPORTANT: always type in the phone number with the
international country code (+39 for Italy)

VOICE CALL VOICE MESSAGE E01 opening L01 CANCEL (x) TO RECORD
MENU Listen/Record V-PLAY X-REC ENTER (V) TO LISTEN AGAIN

SISTEM NAME
V-PLAY X-REC E01 opening of Input 1
E02 opening of Input 2
E03 opening of Input 3
VOICE MESSAGES E01 / tel 12345678 E04 opening of Input 4
Assign telephones *- play E05 opening of Input 5
E06 closing of Input 1
E07 closing of Input 2
E08 closing of Input 3
Time of Attempts 15 Time in sec. between one attempt E09 closing of Input 4
and the next call attempt E10 closing of Input 5
E11 Tamper of Input 01
E12 Tamper of Input 02
Answ. Wait 50 Time in sec. of the duration E13 Tamper of Input 03
Of the outgoing calls E14 Tamper of Input 04
E15 Tamper of Input 05
E16 Life Test
Call attempts made in case E17 GSM OFF 1min
Num. of attempts 3 phonecalls have not been E18 Tampering
successful E19 Low Credit

Msg. repet. 2 Number of repetitions of the Line 01 Msg


voice message Linea 02 Msg
Linea 03 Msg
Linea 04 Msg
SMS MESSAGE SMS MENU Linea 05 Msg
SMS L1 opening
MENU Edit test Insert text.. SYSTEM Name

Event
SMS MENU E01 / tel 12345678
Assig telephones

SMS/ tel 12345678 This parameter send all the SMS received by the
echo dialer to the programmed numbers

Enter () = to change
Rh arrow to change input
INPUTS [ 01 ] Line 01 Up arrow to choose function
Function
MENU H---- - = not programmed input
A = Alarm with reset input closed
H = input 24h always enabled

Enter () = to change
Associate Outputs [ 01 ] Line 01
1- 5 n associated output
inOut 2---- - = output unassociated

www.amcelettronica.com 3 VOXOUT v. 1.2


PROGRAMMING MENU FROM KEYBOARD - 2
Enter () = to change
Rh arrow to change output
Up arrow to choose function
- = not programmed
A = Is enabled with input associated with RES
OUTPUT [ 01 ] Line 01 closed low
Function H = Is enabled with associated input (always, also
MENU H----
with RES open)
T = Tamper alarm
U = Associated to a user code (local and remote)
P = Can be piloted from remote without user code
Associate Telephones L1 O / tel 12345678
G = gsm problem (no GSM for 60')
I = Input in standby
C = Low credit
R = ring
Pulse duration [ 01 ] Line 01
Sec. 15
This parameter allows the user to enable/disable the
outputs by sending out a ring from a programmed
remote telephone. If the output duration is 0, output is
stable, therefore enable/disable step by step. If other
than 0, it becomes a pulse output.
IMPORTANT: always type in the telephone number
with the international country code (+39 for Italy).
USER CODE User types [ 01 ] User Nr 01 The output must have function P
MENU M
M = Master (key 6)
1 - 5 = User enabled only to enable/disable the
CODE: User Nr xx associated output (the output must have function U)
111111 (default UT01)

Program Codes
Program the desired number for the manual
Reset Calls
reset of the call que (it is sufficient to insert even
999999 (default)
just one digit).

SIM Code
0000 (default)

Program with the numbers enabled to the


Tel 12345678 operations on the dialer.
Prog Warning: to ensure proper operation, the
telephone numbers in the phone book must
always be preceded by +39

L1L5= Input 130


Tamper line 01- 05 137
CONTACT ID Idc Event INPUT 1
Life Test 602
MENU Code IDC [ 130 ] GSM OFF 1 min 351
Card Tamper 137

Idc Numbers TEL NUMBER from 01 to 08


es. 031123456

System ID Tel. 01/ ID CODE


1234

Max attempts [3]

Answ. Wait [15 ]

C01=LINE 1
C02=LINE 2
Tone width [3 ] C03=LINE 3
C04=LINE 4
C05=LINE 5
C06=TAMPER LINE 1
Associate telephones C01 /Tel 12345678
C07=TAMPER LINE 2
* - PLAY C08=TAMPER LINE 3
C09=TAMPER LINE 4
C10=TAMPER LINE 5
C11=Life Test
C12=GSM OFF 1 min
C13= Board Tamper

www.amcelettronica.com 4 VOXOUT v. 1.2


PROGRAMMING MENU FROM KEYBOARD - 3

SIM CREDIT INFO Tel. TIM


MENU 40916

Tel. VODAFONE OTHER Credit


404

Tel. wind Enable TVWA


4155 SIM expiration

Tel. other
TIM expiration
PRO INFO
TIM Credit
PRE CRE SIN Vodafone expiration

VODAFONE Credit
WIND expiration
INFO
WIND Credit
SALDO
OTHER expiration

KEYWORD

MENU TEST TEST


Credit threshold
Voice call
[EURO] 3

TEST
CID call

MENU
Board Tamper 0 0 = disabled
VARIOUS
1 = enabled
PARAMETERS

Key Buzzer 0

Life Test 0 Value expressed in hours

Answ. Ring 3

Event Delay 5 Time in seconds of the inhibition of an


input after a first opening

Accept Calls 1

Pass Ring 0

Environment Vol. 8

Language 0

www.amcelettronica.com 5 VOXOUT v. 1.2

Você também pode gostar