Escolar Documentos
Profissional Documentos
Cultura Documentos
presence detectors
Move towards energy efficiency
Energy consumption
will dramatically
increase within the
next 20 years
Solutions based on
energy-efficient
products are
requested more
and more
Functionality 4
Applications 8
Stand-alone detectors 16
High Performance
Integrated room/zone control;
energy management
Advanced
Occupancy management with
automatic light control
Standard
Key functions
like dimmers
Simply reach energy efficiency class B
with Schneider Electric presence detectors
No Efficiency
Switches only
The presence detector senses movement and enough. As a result, the presence detector is
switches the light on depending on ambient especially suitable for rooms that are used for
brightness. Unlike a movement detector, it also longer periods and that receive a high proportion of
Install presence
detectors for maximum switches the light back off when the area is bright daylight.
comfort and efficiency
14 m detection range
10s to 30 min overshoot time
10 - 1000 Lux brightness threshold
e
ng
Staircase timer ec m
ra
et 14
n
tio
D
ARGUS Presence relay ARGUS Presence 1-10V ARGUS Presence DALI ARGUS Presence
Master Master Master Slave
1 or 2 channel options Daylight harvesting Daylight harvesting Up to 10 Slaves per
Brightness independent IR function IR function Master
2nd channel for heating 4 outputs for
or ventilation connecting to networks
IR function
P P P P
Daylight harvesting (1-10V and DALI) Two channels for integrating heating
Lighting control ensures the desired brightness in or ventilation
a room is continually achieved. The brightness of The ARGUS Presence relay 2-gang presence
the lighting is kept nearly constant depending on detector has a brightness-dependent channel and
daylight, by dimming the connected lighting a brightness-independent channel.
group. The first channel automatically controls the
lighting depending on brightness and presence.
Remote controllable The second channel controls connected loads
The ceiling-mounted ARGUS presence detectors such as heating or ventilation depending on
can be easily operated with the remote control: presence only.
switching-maintained light on/off, switching to
automatic mode as well as dimming up/down
for 1-10V and DALI.
Daylight harvesting
e
ic
ff
o
n
la
-p
e
g
en
n
e
u
p
ic
o
O
L
ff
o
rs
to
ec
ir
D
r
o
o
ro
id
rr
g
n
o
ti
C
ee
M
e
iv
h
rc
/A
m
o
ro
y
p
o
C
Integration of
temperature and
ventilation
Single office and Store rooms / rest rooms Corridor Conference room
open plan spaces
Indoor presence detector range for ceiling mounting. The sensor module detects moving
heat sources (e.g. people) within an adjustable area of detection and starts a staircase
timer.
The sensor module is equipped with a light sensor with an adjustable brightness threshold
so that the lighting is only switched on when a specified brightness threshold is not met.
When there is sufficient natural light, the presence function allows the sensor module to
switch off the lighting even when a person is present.
Designed for installation into a 50mm deep round back box or in the surface-mounted
housing available as an accessory.
With screw terminals and claw & screw fixing.
For ohmic, inductive and capacitive loads such as incandescent lamps, energy-saving lamps,
LV halogen lighting with conventional transformer, electronic transformers, fluorescent lamps.
Functions:
Switching of one output
External triggering via one PL-input (Slaves)
Switching
Brightness-dependent staircase lighting function
For ohmic, inductive and capacitive loads such as incandescent lamps, energy-saving lamps,
LV halogen lighting with conventional transformer, electronic transformers, fluorescent lamps.
Functions:
Switching of two outputs
External triggering via two PL-inputs (Slaves)
Switching
Brightness-dependent staircase lighting function with channel 1, staircase lighting function
independent of brightness with channel 2
For fluorescent lamps with electronic ballast or electronic transformer with 1-10V interface.
The switchable light control ensures that the room illumination remains almost constant. The
sensor module continuously measures the brightness in the room and adjusts the illumination
to an adjustable setpoint.
Functions:
Switching and dimming of one output
External triggering via one PL-input (Slave)
Memory function
Brightness-dependent staircase lighting function, light control
Functions:
Switching and dimming of DALI EBs
External triggering via one PL-input (Slave)
Overload and short-circuit-proof
Memory function
Up to 6 DALI control inserts can be connected to one DALI line. However the maximum
number of 64 DALI EBs and a cable length of 300 m must not be exceeded
Brightness-dependent staircase lighting function, light control
For triggering all ARGUS Presence Master. The device has four PL-outputs.
The control function via PL requires a separate core in the installation to the receiving master
devices for each PL line.
Functions:
Global control via four PL-outputs
Staircase lighting function independent of brightness
In M-SMART design.
For triggering all ARGUS Presence Master. The device has one PL-output.
The control function via PL requires a separate core in the installation to the receiving master
devices.
The control function via PL requires a separate core in the installation to the receiving devices.
With screw terminals.
With claw and screw fixing.
Functions:
Line control via one PL-output
Triggering master devices (right buttons)
Activating the 24h staircaise timer (left buttons)
Nominal voltage: AC 220/230 V, 50/60 Hz
Output: 1 x PlusLink
Neutral conductor:not required (2 conductor system)
Wire range: max. 2x2.5 mm
Accessories: PlusLink Expander CCTDT5130
Master: ARGUS Presence Master with IR, relay 1-gang MTN5510-1119, ARGUS Pres-
ence Master with IR, relay 2-gang MTN5510-1219, ARGUS Presence Master with IR, 1-10V
MTN5510-1419, ARGUS Presence Master with IR, DALI MTN5510-1519
MTN570222 Black
10 channel IR remote control. For the control of all TELE sensor covers, blind push-buttons
with IR receiver, presence detectors with IR receivers and KNX devices with IR receivers.
Battery: 2 microcells (IEC LR 03, AAA)
Range: up to 20 m
Contents: Without battery.
PlusLink Expander
Part code
CCTDT5130
The PlusLink extension needs to be integrated into one or more PL-lines if these are protected
by at least two circuit breakers.
If a circuit breaker is triggered in the event of maintenance work or a fault, then the PlusLink
expansion will disconnect the PlusLink line automatically as well. This is necessary because
the PlusLink line would otherwise continue to be live via the other circuit breakers.
With screw terminals.
Suitable for installation on DIN rails TH35 according to EN60715.
Nominal voltage: AC 220/230 V
Neutral conductor: required (3conductor system)
Wire range: max. 4 mm
Device width: 1HP = 18 mm
Description Presence Master with IR, relay 1-gang Presence Master with IR, relay 2-gang
Nominal voltage AC 220/230V, 50/60Hz AC 220/230V, 50/60Hz
Nominal current
max. 10AX, cos = 0.6 Max. 10AX, cos = 0.6. The total load on both
channels is not allowed to exceed 14A
Control current - -
Type - -
Load type - -
Outputs 1 x make contacts 2 x make contacts
Presence Master with IR, 1-10V Presence Master with IR, DALI Presence Slave
AC 220/230V, 50/60Hz AC 220/230V, 50/60Hz AC 220/230V, 50/60Hz
- -
max. 10AX, cos = 0.6
max. 50mA - -
- Category 1 control device -
max. 25 controllable EBs (1-10V) max. 15 controllable DALI EBs -
1 x make contact, 1 x (1-10V) DALI output current: max. 30mA 4 x PL
DALI output voltage: DC 15V
2200W - -
2000W - -
500VA - -
1050W - -
10A, 140 F - -
- - -
- - -
Required (3 conductor system) Required (3 conductor system) Required (3 conductor system)
max. 2x2.5mm2 max. 2x2.5mm2 max. 2x2.5mm2
360o 360o 360o
6 6 6
136 136 136
4 4 4
2.5m 2.5m 2.5m
A radius of max. 7m (at an installation height A radius of max. 7m (at an installation height A radius of max. 7m (at an installation height
of 2.5m) of 2.5m) of 2.5m)
Continuously adjustable Continuously adjustable Continuously adjustable
Continuously adjustable between approx. 10 Continuously adjustable between approx. 10 -
and 1000 lux and 1000 lux
Channel 1: continuously adjustable between Channel 1: continuously adjustable between Channel 1: continuously adjustable between
approx. 10s and approx. 30min approx. 10s and approx. 30min approx. 10s and approx. 30min
Our range of ceiling devices can be discreetly mounted and incorporate a detection range of
up to 360, utilising a less obtrusive design approach and ensuring nothing is missed from
view. These devices are available in either a single or dual load operation for the switching of
heating and ventilation equipment.
Part code
SAEUEMSCDBWE
Functions:
RJ-12 plug and socket for a quick and easy connection
Built-in red LED indicator for IR setting and easy test operation
Part code
SAEUEMSCSAWE
Functions:
High performance relay for connecting all types of lights, e.g. fluorescent lamps, halogen
lamps, incandescent etc
Sensitivity is provided by a unique lens with no dead spot zones in its 360 high intensity
of detection
Part code
SAEUEMSCUWE
Functions:
Integrating PIR and ultrasonic technology, this device is a sophisticated detector, offering a
highly effective solution for a wide variety of applications
Occupancy is detected via frequency shifts caused by minor movements, such as typing or
reading
Part code
E751
E751R
Functions:
The light and time can be adjusted to allow the devices to operate the load at any light level
E751 offers 2 wire connection and 2A operation
E751R offers 3 wire connection and 10A operation
Part code
GUPA1411BSS
GUP1411BSS
Functions:
Optional override facility
Time adjustment of between 15 seconds and 30 minutes
Aesthetic flat plate range design without unsightly fixings screws
Security lighting offers peace of mind, but to save energy, it doesnt need to be on all the time.
PIRs are a great solution to offer the best of both worlds helping to keep you safe, whilst
being kinder to the environment.
The sensitivity of outdoor devices is fully adjustable to minimise false triggering, but ensuring
the device reacts to all visitors and intruders. The light sensitivity level can be adjusted to
ensure the lighting is activated at an appropriate level of darkness.
Part code
CCT56P004
Functions:
High quality sensor with a 12m range, so you wont miss a thing
Easy installation, with quick settings for switch-on time and light sensitivity levels
Areas can be blanked out from the detection range
Part code
CCT56P008
Functions:
12m detection range offers an extended line of vision, ensuring extra protection
Operates in temperatures of -15C to 40C, making the device suitable for most weather
conditions
No earth wire cable is required, offering a straight forward installation
Part code
E750WPRGY
Functions:
3 wire design
Detection field up to 18 metres
Includes separate mounting base (base includes conduit entries)
Ceiling Mounted
Product Description Single-Load 360 Single-Load 360 Dual-Load 360 Infrascan single-load
PIR and Ultrasonic PIR Sensor PIR Sensor 120 PIR sensor
Sensor
Operating voltage 230V 50/60Hz 230V 50/60Hz 230V 50/60Hz 200-265V 50Hz
Field of view 360 360 360 90
Range PIR 18m at 2.5m 7m at 2.5m height 7m at 2.5m height 6m x 6m, 8.5m from
height sensor head. Head
UIS 10x16m rotatable through 120
Mounting Ceiling (surface / flush) Ceiling (surface / flush) Ceiling (flush) Ceiling (surface)
5 sec to 20 min 15 sec 30 min 15 sec 30 min 5 sec to 20 min Approx Approx
(user adjustable) (through 7 time (through 7 time (user adjustable) 3 sec 30 min, 5 sec 20 min,
increments) increments) lower tolerance lower tolerance
2 6s 2 8s
Auto mode, Auto mode, X Auto mode, Auto mode, manual Auto mode, manual
manual override manual override manual override override override
100 x 57mm(H) 88 x 88mm 88 x 88mm Mounting centres With corner bracket With corner bracket
84mm 164mm (L) x 80mm 170mm (L) x 88mm
145x74x110mm (W) x 75mm (H) (W) x 76mm (H)
180x95x147mm without corner without corner
using mounting box brackets bracket
140mm (L) x 80mm 142.5mm (L) x
(W) x 75mm (H) 88mm (W) x
76mm (H)
White S/Steel S/Steel Cool grey White White
Black interior Black interior
01 601 2200
Fax 01 601 2201
Some of our market leading brands have already become Schneider Electric including
Merlin Gerin, Telemecanique, Square D, GET, Mita, Sarel, Himel, Thorsman,
Tower and TAC.
Working as one Schneider Electric makes it clearer that our ranges are highly compatible
for integrated solutions.
Telford Block a 2013 Schneider Electric. All Rights Reserved. Schneider Electric, Active Energy Management,
Shropshire Maynooth Business Campus Compact, EcoStruxure, ION Enterprise, iRIO, Make the most of your energy, Masterpact,
TF3 3BL Maynooth, Co. Kildare Micrologic, Power Plant To Plug, Modbus, and PowerLogic are owned by Schneider Electric
Industries SAS, or its affiliated companies in the United States and other countries. LSB02986_EN
Tel: 0870 608 8 608 Tel: (01) 601 2200
Fax: 0870 608 8 606 Fax: (01) 601 2201 As standards, specifications and designs change from time to time, please ask for confirmation
www.schneider-electric.com/uk www.schneider-electric.com/ie of the information given in this publication.
member of