Escolar Documentos
Profissional Documentos
Cultura Documentos
Company
Location
Input
What is the Process Flow Rate 100.00
What is the Desired Hydraulic Loading Ratio 0.33
What is the Desired Plate Spacing 2.00
NOTE: The hydraulic loading ratio is typically
NOTE: Plate spacing can be set to any number desired. The set from .25 to .5 The lower the settling rate or
recommended plate spacing is typically 2" but higher (and specific gravity (of the settleable material) the
lower, down to as little as 1") can be specified if required by lower the hydraulic loading ratio.
your application. Plate spacing is usually determined by the Hydraulic loading ratios can be determined by
quantity of TSS present. Be cautious when specifying plate field tests or calculated based on the specific
spacing less than 2". TSS and hindered settling rates must be gravity of the chemically treated solids.
taken into consideration.
Output
Required PSA 303
Actual Hydraulic
Loading Ratio
In Ft/Min
Velocity
Available Models
Sludge Thickening
Pyramid Hopper
or