Escolar Documentos
Profissional Documentos
Cultura Documentos
Complete after watching Module 27: Brittle Coulomb Mohr Theory Example
Assumptions:
Isotropic, homogenous, linear elastic, brittle material, neglecting weight of bone.
Thoughts:
T results in torsional stress. At point A the torsional shear stress will be tyz.
M results in bending stress that will be maximum at the edges of the bone, the neutral plane will be
along the y-axis in the y-z plane. The stress will act in the y-direction as sy. Point A will be pulled into
torsion. Transverse shear will be 0 at point A as it is on the edge of the bone, far from the neutral axis.
Known:
d = 0.024 m, Suc = 170 MPa, Sut = 120 MPa, T = 80 N*m, M = -100 N*m.
Analysis:
Determine stresses in X, Y, and Z directions.
Analysis:
Calculate principal stresses
sx +sz s -sz
2 2
73.7 73.7
s 1, s 2 = x + t 2xz = + 29.4 2 = 84.0MPa, -10.3MPa
2 2 2 2
Case 2: sa 0 sb
1 sa sb
= -
n Sut Suc
1
n= = 1.3
84 -10.3
-
120 170