Escolar Documentos
Profissional Documentos
Cultura Documentos
HANDBOOK
rev2013.06.19
GORILLA Drilling Motors
Table of Contents
Motor Description 1
Overview. 1
Top Sub 1
Power Sections.. 1
Bearing Section. 6
Drive Shaft.. 7
Running In.. 7
Drilling.. 8
Tripping Out. 8
Drilling Fluids. 8
Downhole Temperature. 9
Servicing... 9
Motor Specifications. 10
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
ii
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
iii
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
iv
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
v
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
vi
GORILLA Drilling Motors
Overview
As shown in Figure 1, downhole motors are comprised of a top sub, power
section, adjustable bend housing, bearing pack assembly and bit box.
Internally, the power section rotor is normally supplied with a rotor catch on
top, a CV-type flex coupling on the bottom that converts the eccentric
rotation of the rotor to pure rotary, a stackable arrangement of radial and
thrust bearings to take side loads and on-bottom/off-bottom axial loads, a
drive shaft and various seals.
Top Sub:
The top sub box thread is available in several options for each motor size.
These options are listed in the motor performance section. Please specify
the top sub connection when ordering.
Power Sections:
The function of the power section is to convert a portion of the hydraulic
energy of the drilling motor (in the form of pressure and flow) into
mechanical power in the form of rotation and torque. The power section
consists of a fluted rotor and a rubber lined stator where the stator has one
more lobe than the rotor.
The upper end of the rotor is fitted with a fishing neck to prevent Figure 1
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
1
GORILLA Drilling Motors
component loss in the event of a failure. Rotors are normally provided solid but can be gunned
drilled to accept a bypass nozzle upon request.
The lower end of the rotor is threaded onto a CV-type coupling which converts the eccentric
motion into pure rotary motor. The Downhole end of the CV-type coupling connects to the
drive shaft. Drilling torque is transmitted through a multi-ball and socket arrangement.
By setting this housing to various degree settings, it is possible to achieve a wide range of build
rates. Build rates for each motor combination can be found in the Motor Specification sheets
starting on page 11. The predicted build rates are based on the 3-point arc defined by the drill
bit, the bit-to-bend distance and size of the kick pad (or stabilizer size) and the overall motor
length as shown below. Realistic bit lengths have been used in these calculations.
Figure 2.
Actual build rates can vary from the predicted rates. Build rate is dictated by a number of
factors including (1) drill bit characteristics especially gauge length and side cutting ability, (2)
weight on bit where higher weights generally increase build rates ; (3) overall motor length; (4)
bit-to-bend distance; (5) location and outer dimensions of the wear pad and/or stabilizers and
(5) formation ansiotrophy.
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
2
GORILLA Drilling Motors
When running slick stabilizers, the build rate for a given motor decreases with increasing hole
size. For stabilized motors. The build rate increases with increasing hole size. The build rates in
this manual assume the stabilizer is 1/8 inch under-gauge.
Care must be shown regarding rotating bent housing motors in the hole. In general, motors set
with bends above 1.83 degrees should not be rotated in the hole. RPM should be limited to no
more than 60 rpm if possible.
The procedure for setting the adjustable bend housing is described in the figures below.
2 3
Figure 3 - Step A
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
3
GORILLA Drilling Motors
Figure 4 - Step B
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
4
GORILLA Drilling Motors
2 1
Figure 5 - Step C
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
5
GORILLA Drilling Motors
Bearing Section:
All AXON Directional Drilling Motors (DDM) feature sealed, pressure compensated bearing
sections. State of the art rotary seals are employed at each end of the bearing section to
prevent drilling mud from entering the bearing housing while sealing in lubricating oil. Upper
and lower seals have equivalent sealing diameters.
Pressure compensation is achieved through a sealed floating ring located just above the bit box
on the pilot diameter of the drive shaft. This piston prevents high differential pressure across
the rotary seals as well as compensates for increases in oil volume when high temperatures are
encountered. The compensator piston rotates with the drive shaft and bearing shaft transition
ring thereby avoiding the need for a rotary seal on the compensator piston. Weep holes located
at the lower end of the drive shaft allows bit pressure exposure to one side of the compensator
piston providing a positive pressure inside the bearing housing - further discouraging mud
invasion into the bearing section.
Each bearing section utilizes high capacity roller thrust bearings. For all but the 3-3/4 motors,
the thrust bearings are stackable in either a 4:2 or 3:3 on bottom/off bottom arrangements to
optimize load capacities to expected drilling conditions. Each thrust bearing is backed with a
Belleville style spring washer which serves to evenly distribute the load over multiple
bearings and provide shock load cushioning created while drilling. All bearing components are
held in compression within the assembly to prevent rotation. Rotating and stationary sleeves
are pre-machined to length to provide proper Belleville spring preloading. This stackable
bearing arrangement serves to minimize diametric step changes along the shaft length thus
reducing stress concentrations produced by shoulders and grooves.
Each bearing section utilizes high capacity roller radial bearings. Radial bearing sets are spaced
apart with sleeves to provide higher radial load carrying capacities. Bearing sets, top and
bottom provide radial support to the drive shaft as well as the rotary seal preventing wear and
extending seal life.
A drive shaft lock nut is located between the thrust bearing stack and the lower radial bearing.
The lock nut ring is threaded (left hand thread) onto the drive shaft, and once installed, serves
to compress the inner races of the lower radial bearing and the lower transition ring to prevent
rotation relative to the drive shaft. The lower lock nut will not pass through the lower seal sub
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
6
GORILLA Drilling Motors
so in case of a failure in the upper area of the drive shaft the lock nut will prevent component
loss from the bearing assembly.
A drive shaft cap threads to the upper part of the drive shaft and serves to compress all rotating
components preventing rotation relative to the drive shaft. It also serves to divert mud flow
into the drive shaft bore. Diverter slots are optimized to minimize pressure loss at higher mud
flow rates and case hardened to minimize erosion from the mud flow turbulence. The outer
diameter of the drive shaft cap is hard chrome plated to provide a hardened and ground
running surface for the rotary seal.
The bearing section outer housing is upset and threaded to accept replaceable centralizer
sleeves of any size. A centralizer blank sleeve is available in cases where centralizers are not
used.
Drive Shaft
The drive shafts are forged for high strength with a 140 KSI MYS. The drive shafts cross-sections
have been made as large as possible within available design constraints. The end of the drive
shaft has an API regular box connection for connecting the drill bit.
Running In
Care should always be exercised regarding tripping speeds when running in the hole to prevent
striking BOP components, casing shoes, bridges or shelves which may be in the borehole. Tight
spots should be addressed by operating the mud pumps and slowly reaming through the
restrictions. In addition, the motor should be started by circulating off bottom to prevent
possible plugging of the drill bit nozzles. Errors in pipe tallying or cuttings backfill in the bottom
of the hole always dictate slow tripping speeds when approaching bottom.
It is important to record circulating off-bottom standpipe pressure at a known flow rate. The
pressure difference above the off-bottom pressure is a measure of the torque being demanded
from the motor while it is drilling. In fact, motor pressure differential is proportional to bit
torque. It is not recommended to exceed maximum differential pressure in the motor curves
provided in this handbook as this will reduce stator life.
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
7
GORILLA Drilling Motors
Drilling
Start the mud pumps and slowly bring up the flow until the desired flow rate has been achieved
and is stabilized. Slowly lower the motor to bottom. On bottom will be evidence by an increase
in standpipe pressure. Gradually increase weight on bit to achieve optimal rate of penetration.
Continue to monitor motor pressure differential, ROP and adjust WOB accordingly. As the bit
drills off, WOB and standpipe pressure will decrease until WOB is readjusted.
Application of too high of bit weight can cause the mud motor to stall. When stalled, the rotor
is no longer turning and fluid is trying to be forced back up the drill pipe. This creates a dead-
head type condition which can cause damage to the power section. Therefore stalling should
be avoided.
The following actions should be taken when the motor is in a stalled condition:
Tripping Out
Prior to tripping out, circulate bottoms up. Tripping speeds should be controlled to prevent hole
swabbing. Speeds should also be slowed when approaching known tight spots, high build rate
intervals and casing points, etc. Extended back-reaming should be avoided as it shortens motor
life.
At the surface, visually inspect the motor to check for external damage prior to re-run.
Drilling Fluid
The directional drilling motors can be operated with both water- and oil-based drilling fluids.
The aniline point for oil-based muds is the temperature at which the stators nitrile or HSN
rubber swells. The lower the aniline point the greater the swelling. Aniline points should
generally be kept above 160 to prevent swelling.
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
8
GORILLA Drilling Motors
Highly saturated brines can shorten rotor life due to corrosion. Chloride content should not
exceed 30,000 ppm when using hard chrome rotors. Motors run in these conditions (> 30,000
ppm chloride) should be immediately flushed with clean water after pulling out of the hole and
serviced as soon as practical to minimize corrosion impacts.
It is recommended that sand content not exceed 3% and total solids not exceed 5%. Mud
weights in excess of 16 ppg will shorten power section life.
If flow rates higher than the maximum recommended flow rate for a given power section are
required, the rotor can be gun-drilled and fitted with a bypass nozzle. Please contact your
AXON representative to assist you in nozzle sizing. Gun-drilled rotors can be blocked by
installing a blanked nozzle.
Downhole Temperature
Standard fit rotor/stators are normally used when hole temperatures are less than 250F
degrees (120 C). For higher temperatures, standard practice is to reduce the rotor/stator fit to
compensate for the rubber swelling. Be aware that reduced fit rotor/stator combinations
require the rubber be hot to produce the desired horsepower and will have degraded
performance if run in cooler hole sections.
Servicing
Motors should be disassembled, cleaned and thoroughly inspected upon return from the field.
The majority of items can be re-run providing they are still in specification. Please consult your
maintenance and assembly manual provided with your purchase.
O-rings used in the multi-ball socket arrangement on both ends of the coupling should be
replaced each time the motor returns from the field and the joints should be repacked with
grease. In addition, the rotary seals located on both ends of the sealed bearing pack should be
replaced.
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
9
GORILLA Drilling Motors
MOTOR SPECIFICATIONS
The following section contains important information for each motor operation. Motors should
not be operated above the pressure differential at maximum torque provided in the tables.
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
10
GORILLA Drilling Motors
800
700
600
Torque Lbs-Ft
500
400
Min Flow
300
Max Flow
200
100
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
11
GORILLA Drilling Motors
250
200
150
RPM
100 GPM
100
160 GPM
50
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
12
GORILLA Drilling Motors
1400
1200
1000
Torque Lbs-Ft
800
200
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
13
GORILLA Drilling Motors
300
250
200
RPM
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
14
GORILLA Drilling Motors
1400
1200
1000
Torque Lbs-Ft
800
200
0
0 200 400 600 800
Differential Pressure
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
15
GORILLA Drilling Motors
180
160
140
120
100
RPM
80 GPM
80
140 GPM
60
200 GPM
40
20
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
16
GORILLA Drilling Motors
1800
1600
1400
1200
Torque Lbs-Ft
1000
800 Min Flow
600 Max Flow
400
200
0
0 100 200 300 400 500
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
17
GORILLA Drilling Motors
100
90
80
70
60
RPM
50 100 GPM
40 130 GPM
30 160 GPM
20
10
0
-50 50 150 250 350 450
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
18
GORILLA Drilling Motors
1200
1000
800
Torque Lbs-Ft
600
100 GPM
400 160 GPM
200
0
0 100 200 300 400 500
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
19
GORILLA Drilling Motors
140
120
100
80
RPM
100 GPM
60
130 GPM
40 160 GPM
20
0
0 100 200 300 400 500
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
20
GORILLA Drilling Motors
SA-LEFT
Lower Seal Sub 2500 3390
Pin Up HAND
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
21
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
22
GORILLA Drilling Motors
1200
1000
Torque (Lbs-Ft)
800
600
Min Flow
400 Max Flow
200
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
23
GORILLA Drilling Motors
300
250
200
100 GPM
RPM
150
150 GPM
100 200 GPM
250 GPM
50
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
24
GORILLA Drilling Motors
2000
1800
1600
1400
Torque Lbs-Ft
1200
1000
Min Flow
800
600 Max Flow
400
200
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
25
GORILLA Drilling Motors
300
250
200
RPM
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
26
GORILLA Drilling Motors
2000
1800
1600
1400
Torque Lbs-Ft
1200
1000
Min Flow
800
600 Max Flow
400
200
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
27
GORILLA Drilling Motors
300
250
200
100 GPM
RPM
150
150 GPM
100 200 GPM
250 GPM
50
0
0 200 400 600 800 1000
Differential Preesure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
28
GORILLA Drilling Motors
3000
2500
2000
Torque Lbs-Ft
1500
Min Flow
1000 Max Flow
500
0
0 500 1000 1500
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
29
GORILLA Drilling Motors
350
300
250
0
0 500 1000 1500
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
30
GORILLA Drilling Motors
3000
2500
2000
Torque Lbs-Ft
1500
Min Flow
1000 Max Flow
500
0
0 100 200 300 400
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
31
GORILLA Drilling Motors
90
80
70
60
50 100 GPM
RPM
40 150 GPM
30 200 GPM
20 250 GPM
10
0
0 100 200 300 400
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
32
GORILLA Drilling Motors
2000
1800
1600
1400
Torque Lbs-Ft
1200
1000
Min Flow
800
600 Max Flow
400
200
0
0 100 200 300 400 500
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
33
GORILLA Drilling Motors
160
140
120
100
100 GPM
RPM
80
150 GPM
60
200 GPM
40
250 GPM
20
0
0 100 200 300 400 500
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
34
GORILLA Drilling Motors
4500
4000
3500
3000
Torque Lbs-Ft
2500
2000 Min Flow
1500 Max Flow
1000
500
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
35
GORILLA Drilling Motors
90
80
70
60
50 100 GPM
RPM
40 150 GPM
30 200 GPM
20 250 GPM
10
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
36
GORILLA Drilling Motors
3000
2500
2000
Torque Lbs-Ft
1500
Min Flow
1000 Max Flow
500
0
0 200 400 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
37
GORILLA Drilling Motors
140
120
100
80 100 GPM
RPM
60 150 GPM
200 GPM
40
250 GPM
20
0
0 200 400 600 800
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
38
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
39
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
40
GORILLA Drilling Motors
3000
2500
2000
Torque Lbs-Ft
1500
Min Flow
1000 Max Flow
500
0
0 200 400 600 800
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
41
GORILLA Drilling Motors
350
300
250
0
0 200 400 600 800
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
42
GORILLA Drilling Motors
5000
4500
4000
3500
Torque Lbs-Ft
3000
2500
Min Flow
2000
1500 Max Flow
1000
500
0
0 200 400 600 800 1000 1200
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
43
GORILLA Drilling Motors
350
300
250
0
0 200 400 600 800 1000 1200
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
44
GORILLA Drilling Motors
Maximum Weight-on-Bit
4:2 Bearing Configuration 140,400 Lbs (624.5 kN) Dynamic
568.000 Lbs (2526.6 kN) Static
3:3 Bearing Configuration 105,200 Lbs (467.9 kN) Dynamic
426,000 Lbs (1894.9 kN) Static
Maximum Overpull (Re-Run) 284,000 Lbs (1263.3 kN) for 4:2 Configuration
426,000 Lbs (1894.9 kN) for 3:3 Configuration
Motor Yield 750,000 Lbs (3336.2 kN)
ABH Sleeve Recommended Make-Up Torque 25,000 Lbs-Ft (33,895 N-m)
Near-Bit Stabilizer/Slick Sleeve Make-Up Torque 13,000 Lbs-Ft (17,626 N-m)
4500
4000
3500
Torque Lbs-Ft
3000
2500
2000
1500
1000
500
0
0 100 200 300 400 500 600 700
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
45
GORILLA Drilling Motors
250
200
150
RPM
100
50
0
0 100 200 300 400 500 600
Flow Rate (GPM)
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
46
GORILLA Drilling Motors
Maximum Weight-on-Bit
4:2 Bearing Configuration 140,400 Lbs (624.5 kN) Dynamic
568.000 Lbs(2526.6 kN) Static
3:3 Bearing Configuration 105,200 Lbs (467.9 kN) Dynamic
426,000 Lbs (1894.9 kN) Static
Maximum Overpull (Re-Run) 284,000 Lbs (1263.3 kN) for 4:2 Configuration
426,000 Lbs (1894.9 kN) for 3:3 Configuration
Motor Yield 750,000 Lbs (3336.2 kN)
ABH Sleeve Recommended Make-Up Torque 25,000 Lbs-Ft (33,895 N-m)
Near-Bit Stabilizer/Slick Sleeve Make-Up Torque 13,000 Lbs-Ft (17,626 N-m)
7000
6000
5000
Torque Lbs-Ft
4000
3000
2000
1000
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
47
GORILLA Drilling Motors
250
200
150
RPM
100
50
0
0 100 200 300 400 500 600
Flow Rate - GPM
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
48
GORILLA Drilling Motors
7000
6000
5000
Torque Lbs-Ft
4000
1000
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
49
GORILLA Drilling Motors
200
180
160
140
120
300 GPM
RPM
100
400 GPM
80
500 GPM
60
40 600 GPM
20
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
50
GORILLA Drilling Motors
9000
8000
7000
6000
Torque Lbs-Ft
5000
4000 Min Flow
3000 Max Flow
2000
1000
0
0 500 1000 1500
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
51
GORILLA Drilling Motors
200
180
160
140
120
RPM
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
52
GORILLA Drilling Motors
6000
5000
4000
Torque Lbs-Ft
3000
Min Flow
2000 Max Flow
1000
0
0 100 200 300 400
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
53
GORILLA Drilling Motors
120
100
80
200 GPM
RPM
60
400 GPM
40 500 GPM
600 GPM
20
0
0 100 200 300 400
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
54
GORILLA Drilling Motors
5000
4500
4000
3500
Torque Lbs-Ft
3000
2500
Min Flow
2000
1500 Max Flow
1000
500
0
0 200 400 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
55
GORILLA Drilling Motors
200
180
160
140
120
300 GPM
RPM
100
400 GPM
80
500 GPM
60
40 600 GPM
20
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
56
GORILLA Drilling Motors
7000
6000
5000
Torque Lbs-Ft
4000
1000
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
57
GORILLA Drilling Motors
200
180
160
140
120
300 GPM
RPM
100
400 GPM
80
500 GPM
60
40 600 GPM
20
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
58
GORILLA Drilling Motors
8000
7000
6000
Torque Lbs-Ft
5000
4000
Min Flow
3000
Max Flow
2000
1000
0
0 200 400 600 800 1000 1200
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
59
GORILLA Drilling Motors
200
180
160
140
120
300 GPM
RPM
100
400 GPM
80
500 GPM
60
40 600 GPM
20
0
0 200 400 600 800 1000 1200
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
60
GORILLA Drilling Motors
SA-LEFT
Lower Seal Sub 14000 18981
Pin Up HAND
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
61
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
62
GORILLA Drilling Motors
4500
4000
3500
3000
Torque Lbs-Ft
2500
2000 Min Flow
1500 Max Flow
1000
500
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
63
GORILLA Drilling Motors
250
200
150
400 GPM
RPM
600 GPM
100
800 GPM
50 900 GPM
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
64
GORILLA Drilling Motors
6000
5000
4000
Torque Lbs-Ft
3000
Min Flow
2000 Max Flow
1000
0
0 200 400 600 800
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
65
GORILLA Drilling Motors
250
200
150
400 GPM
RPM
600 GPM
100
800 GPM
50 900 GPM
0
0 200 400 600 800
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
66
GORILLA Drilling Motors
4500
4000
3500
3000
Torque Lbs-Ft
2500
2000
1500
1000
500
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
67
GORILLA Drilling Motors
300
250
200
RPM
150
100
50
0
0 200 400 600 800 1000
Flow Rtae - GPM
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
68
GORILLA Drilling Motors
7000
6000
5000
Torque Lbs-Ft
4000
1000
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
69
GORILLA Drilling Motors
300
250
200
RPM
150 Series1
Series2
100
Series3
50
0
0 200 400 600 800 1000
Differential Presssure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
70
GORILLA Drilling Motors
9000
8000
7000
6000
Torque Lbs-Ft
5000
4000 Min Flow
3000 Max Flow
2000
1000
0
0 200 400 600 800
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
71
GORILLA Drilling Motors
180
160
140
120
100 300 GPM
RPM
80 500 GPM
60 700 GPM
40 900 GPM
20
0
0 200 400 600 800
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
72
GORILLA Drilling Motors
12000
10000
8000
6000
Torque Lbs-Ft
Min Flow
4000 Max Flow
2000
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
73
GORILLA Drilling Motors
180
160
140
120
100 300 GPM
RPM
80 500 GPM
60 700 GPM
40 900 GPM
20
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
74
GORILLA Drilling Motors
9000
8000
7000
6000
Torque Lbs-Ft
5000
4000 Min Flow
3000 Max Flow
2000
1000
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
75
GORILLA Drilling Motors
160
140
120
100
300 GPM
RPM
80
500 GPM
60
700 GPM
40
900 GPM
20
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
76
GORILLA Drilling Motors
10000
9000
8000
7000
Torque Lbs-Ft
6000
5000
Min Flow
4000
3000 Max Flow
2000
1000
0
0 200 400 600 800
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
77
GORILLA Drilling Motors
160
140
120
100
300 GPM
RPM
80
500 GPM
60
700 GPM
40
900 GPM
20
0
0 200 400 600 800
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
78
GORILLA Drilling Motors
SA-LEFT
Lower Seal Sub 22000 29828
Pin Up HAND
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
79
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
80
GORILLA Drilling Motors
140
120
100
80
RPM
600 GPM
60
900 GPM
40 1200 GPM
20
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
81
GORILLA Drilling Motors
10000
9000
8000
7000
Torque Lbs-Ft
6000
5000
600 GPM
4000
1200 GPM
3000
2000
1000
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
82
GORILLA Drilling Motors
12000
10000
8000
Torque Lbs-Ft
6000
Min Flow
4000 Max Flow
2000
0
0 200 400 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
83
GORILLA Drilling Motors
140
120
100
80
RPM
600 GPM
60
900 GPM
40 1200 GPM
20
0
0 200 400 600 800
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
84
GORILLA Drilling Motors
14000
12000
10000
Torque Lbs-Ft
8000
2000
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
85
GORILLA Drilling Motors
180
160
140
120
100 600 GPM
RPM
80 800 GPM
60 1000 GPM
40 1200 GPM
20
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
86
GORILLA Drilling Motors
18000
16000
14000
12000
Torque Lbs-Ft
10000
8000 Min Flow
6000 Max Flow
4000
2000
0
0 200 400 600 800 1000 1200
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
87
GORILLA Drilling Motors
180
160
140
120
100 600 GPM
RPM
80 800 GPM
60 1000 GPM
40 1200 GPM
20
0
0 200 400 600 800 1000 1200
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
88
GORILLA Drilling Motors
SA-LEFT
Lower Seal Sub 48000 65079
Pin Up HAND
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
89
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
90
GORILLA Drilling Motors
Maximum Overpull (Re-Run) 1,026,000 Lbs (4563.9 kN) for 4:2 Configuration
20000
Torque Lbs-Ft
15000
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
91
GORILLA Drilling Motors
180
160
140
120
100 900 GPM
RPM
80 1200 GPM
60 1500 GPM
40 1800 GPM
20
0
0 200 400 600 800 1000
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
92
GORILLA Drilling Motors
112527
7 5/8 REG 83000 - 91000
123373
181671 -
Bit Box Box Down 8 5/8 REG 134000 - 153000
207430
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
93
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
94
GORILLA Drilling Motors
90
80
70
60
Torque Lbs-Ft
50
40
30
20
10
0
0 50 100 150 200 250 300
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
95
GORILLA Drilling Motors
400
350
300
250
RPM
200 20 GPM
150 30 GPM
100 40 GPM
50
0
0 50 100 150 200 250 300
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
96
GORILLA Drilling Motors
30
25
20
Torque Lbs-Ft
15
10
0
0 50 100 150 200
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
97
GORILLA Drilling Motors
700
600
500
400
RPM
20 GPM
300
30 GPM
200 40 GPM
100
0
0 50 100 150 200
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
98
GORILLA Drilling Motors
200
180
160
140
Torque Lbs-Ft
120
100
80 Series1
60
40
20
0
0 200 400 600 800
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
99
GORILLA Drilling Motors
700
600
500
400
RPM
25 GPM
300
40 GPM
200 55 GPM
100
0
0 200 400 600 800
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
100
GORILLA Drilling Motors
NC 12 400 542
1 1/4 REG 400 542
Bit Box Box Down
AW ROD 750 1017
1 1/4 AMMT 400 542
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
101
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
102
GORILLA Drilling Motors
180
160
140
120
100
Torque Lbs-Ft
80
60
40
20
0
0 50 100 150 200 250 300 350 400
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
103
GORILLA Drilling Motors
400
350
300
250
RPM
200 20 GPM
150 35 GPM
100 50 GPM
50
0
0 100 200 300 400
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
104
GORILLA Drilling Motors
NC 16 750 1017
1 1/2 Reg 750 1017
Bit Box Box Down
BW ROD 1000 1356
1 1/2 AMMT 750 1017
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
105
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
106
GORILLA Drilling Motors
200
180
160
140
Torque Lbs-Ft
120
100
Min Flow
80
Max Flow
60
40
20
0
0 100 200 300 400 500 600
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
107
GORILLA Drilling Motors
500
450
400
350
300
RPM
250 20 GPM
200 50 GPM
150 80 GPM
100
50
0
0 100 200 300 400 500 600
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
108
GORILLA Drilling Motors
600
500
400
Torque (Lbs-Ft
300
200
100
0
0 200 400 600 800 1000 1200
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
109
GORILLA Drilling Motors
500
450
400
350
300
RPM
250 20 GPM
200 50 GPM
150 80 GPM
100
50
0
0 200 400 600 800 1000 1200
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
110
GORILLA Drilling Motors
300
250
200
Torque Lbs-Ft
150
Min Flow
100 Max Flow
50
0
0 100 200 300 400 500
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
111
GORILLA Drilling Motors
400
350
300
250
RPM
200 70 GPM
150 90 GPM
50
0
0 100 200 300 400 500
Differential Pressure - PSI
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
112
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
113
GORILLA Drilling Motors
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
114
GORILLA Drilling Motors
Force:
1 Pound Force = 4.44822 Newton
1 Newton = 0.2248089 Pounds Force
Pressure:
1 Pound/Square Inch = 6.8947 kilo-Pascals
1 KPascal = 0.14504 Pound/Square Inch
Temperature:
Celsius = (Fahrenheit 32)/1.8
Fahrenheit = 1.8 x Celsius + 32
At AXON, we embrace Alternative Thinking, we build oilfield Products that Perform, and we demand that Aftermarket is not an Afterthought.
AXON Downhole Products, Inc. All Rights Reserved Specifications Subject to Change Without Notice
115
AXON Downhole Products AXON Energy Products
10608 Tower Oaks Blvd. WORLD HEADQUARTERS
Houston, TX 77070 10343 Sam Houston Park Dr.
P 281.255.5545 Suite 210
F 281.255.5591 Houston, TX 77064
P 832.581.4100
SDS Erbil Facility F 281.890.8817
Gazna Rd.
Ainkawa, Erbil
Kurdistan Region, Iraq
P 964 662 577 868