Você está na página 1de 2

PARALLEL RESONANCE

AIM:To determine the self induction of the given coil using parallel resonance.

APPARATUS: L.F Oscillator,capacitor,inductance coil,Multimeter,Resistance box,Rheostat etc.

FORMULA: L=1/ 42f02c Hz

Band width =f2-f1 Hz

Quality Factor = f0/f2-f1

PROCEDURE:The electric connections are made as shown in the circuit .

The LF oscillator is switched on the amplituce of voltage is set at a particular


value[v1] on LF oscillator.The multimeter should be connected across the resistor.A copper volt
range is set in multimeter.

The frequency is gradually increased along A,B and C score of frequency.At each
frequency the voltage across the resistors is measured. The voltage across the resistor is
measured the voltage again is determined for different frequencies.The graph of the voltage
gain v/s frequencies is plotted using ordinary graph or semilog graph.By knowing the value of
resistance frequency for the value of inductance coil is determind using the formula

: L=1/ 42f02c Hz

Band width =f2-f1 Hz

Quality Factor = f0/f2-f1

OBSERVATION TABLE:

C= ,R=

Frequency in Hz Voltage in v
Result:

The self inductance of the coil using series resonance is L= H

Quality Factor Q=

Band Width = hz

Você também pode gostar