Escolar Documentos
Profissional Documentos
Cultura Documentos
R+## = arc radius(+) if < 180 R-## = arc radius(-) if > 180
D## = cutter dia/rad offset H## = tool length offset
P## = dwell time in 10000th sec
G-Codes
G99 = Retract the tool to the R plane when the drilling cycle is finished. Regardless of
the starting height, the tool will return to Z.100 (the Rplane shown below).
M-Function Codes
M19 = Spindle orientation on. Used to locate the tool tip position for boring tools.
Sometimes output with a value that represents the angle of the tool tip orientation.