Escolar Documentos
Profissional Documentos
Cultura Documentos
Description: The machining and mechanical testing of one only butt welded
Welder / Procedure Qualification test plate.
Identification: WPQR GF186 STT / FCAW 2G
Welder: K. Hawtin (WR13)
Material Specification: AS/NZS3678 Grade 350 8MM PL
Heat No: N92116
Test Specification: AS/NZS3992-2015 (AS1210 Class 1.), AS/NZS1554.1-2014, Category SP.
Samples received: 18/05/2017
MIS Job: MT17-00649 / 1 This service has been delivered under the controls established by a QMS approved quality management Page 1 of 2
system that conforms with ISO9001. Under QMS certificate number 002-92314-Q.
Please note that following the completion of testing MIS Pty Ltd will retain test samples for a period of 14 days, unless prior written arrangements have been made with MIS.
Note that this report is based on the products supplied to MIS Pty Ltd and it remains the responsibility of the client to ensure the samples presented are representative of
the whole batch. Reproduction of this report, other than in it's entirety, must be approved by MIS.
MATERIAL TEST REPORT
Job No: MT17-00649 / 1 ABN 90 706 021 096
ACN 079 834 058
MACRO 1
MACRO 2
MIS Job: MT17-00649 / 1 This service has been delivered under the controls established by a QMS approved quality management Page 2 of 2
system that conforms with ISO9001. Under QMS certificate number 002-92314-Q.
Please note that following the completion of testing MIS Pty Ltd will retain test samples for a period of 14 days, unless prior written arrangements have been made with MIS.
Note that this report is based on the products supplied to MIS Pty Ltd and it remains the responsibility of the client to ensure the samples presented are representative of
the whole batch. Reproduction of this report, other than in it's entirety, must be approved by MIS.
MIS Job N: MT17-00649/1
8 Egmont Rd Henderson, WA 6166
Tel. (08) 9437 6155 Date of Test: 18/05/2017
Fax. (08) 9437 6022
Page N: 1 of 1
Test Restrictions
No Restrictions
Abbreviation List
DNC Does not Comply SRC Root Concavity A Absence of Discontinuities GP Gas Pore C Complies
SGC Shrinkage Groove SSP Spatter IT Tungsten Inclusion PG Group Porosity KL Longitudinal Crack
SMG Grind Mark SUC Undercut LP Incomplete Root Penetration PL Linear Porosity KC Crater Crack
SMT Tool Mark SXP Excess Penetration SGI Incompletely Filled Groove PU Uniform Porosity KE Edge Crack
LS Lack of Side Fusion CP Crater Pipe LI Lack of Inter-run Fusion WH Wormhole KT Transverse Crack
LR Lack of Root Fusion PD Processing Defect EC Elongated Cavity IL Linear Inclusion IN Inclusion
Signature: