Escolar Documentos
Profissional Documentos
Cultura Documentos
W SCHRACK INFO
The Schrack Combtec series is a combination of lightning and surge arresters (TI + TII). This series
was tested and certified in accordance with IEC/EN 61643. The use of SCHRACK Combtec arre-
sters is necessary in consumer systems that are classified in lightning protection class (hazard
level) III or IV (12.5 kA (10/350) per pole). In indoor mounting not dependent on position the
national installation regulations must be followed (Austria: VE/NORM E 8001, VE/NORM
COMBTEC 8049, VE/NORM EN 62305). The Combtex series has been designed such that there is a com-
plete unit for each network system interconnecting different devices is not necessary. Special
rail mounting systems are available for easy rail connection of the SPDs with the residual current
circuit breaker.
W
TECHNICAL
TECHNISCHEDATA
DATEN
Page
Combtec TNC* Combtec TNS* Combtec TT*
270 Validated according to
Geprft nach Test class I +I +
Testklasse II +II [III] (B (B
+ [III] + C++C[D]) IEC61643-1/EN
+ [D]) 61643-11
IEC61643-1/EN 61643-11
Max.
Max.continuous voltage
Dauerspannung* 275 VAC (350 VDC) 275 VAC (350 VDC) 275 VAC (350 VDC)
Impulsstrom
Impulse currentIimp
Iimp(10/350)
(10/350) 12,5 kA/pole
Pole 12,5 kA/pole
Pole 12,5 kA/pole
Pole
Spezifische
Specific powerEnergie
(W/R) (W/R) 39 kJ/1/pole
Pole 39 kJ/1/pole
Pole 39 kJ/1/pole
Pole
LadungQ Q
Charge Pole
6,25 As/pole Pole
6,25 As/pole 6,25 As/pole
Pole
Max.discharge
Max. Ableitstostrom Imax (8/20)
current Imax (8/20) 50 kA/pole
Pole 50 kA/pole
Pole 50 kA/pole
Pole
Nominal discharge current InIn(8/20)
Nennableitstostrom (8/20) 20 kA/pole
Pole 20 kA/pole
Pole 20 kA/pole
Pole
[Combined surge USto
[Kombinierter oc/Isc] Uoc/Isc] [10 kV/5 kA] [10 kV/5 kA] [10 kV/5 kA]
Schutzpegel
Protection level UU p (at
p (at In) In) )1,5kV )1,5kV )1,5kV
Max.
Max.tightening torque
Anzugsmoment 4,5 Nm 4,5 Nm 4,5 Nm
Max.
Max.back-up fuse
Vorsicherung 250 AgL
Temperature range
Temperaturbereich -40 oC -+
-40C 80 oC
- +80C
Terminal cross-section
Klemmenquerschnitt 35 mm (eindrhtig/solid), 25
35 mm 2
(solid), 25 mm 2
mm stranded)
(finely (feindrhtig)
Montage
Mounting 35 mm 35 mm
DINDIN rail
Schiene
Degree of protection
Schutzart IP20
Abmessungen
Dimensions 54 x 90 x 70 72 x 90 x 70 72 x 90 x 70
Dimensions
Abmessungenwith auxiliary
mit HK contact 54 x 98 x 70 72 x 98 x 70 72 x 98 x 70
**bei max.continuous
for max. Dauerspannung
voltage U
Ucc =335
= 335VVACAC
Ausfhrungen sind
versions, charge alle code
article anderen technischen
to IS210*, all otherDaten ident
technical data are identical
W
SCHEMATIC DIAGRAM
SCHEMATISCHER AUFBAU
HK contact
W
DIMENSIONS
ABMESSUNGEN
W ANSCHLUSSSCHEMA
CONNECTION DIAGRAM
Page
271
W
OTHER
SONSTIGES
RM
ALA
RED
REPLACE
BeiSPDs
For Ableitern mit Hilfskontakt
with auxiliary endetnumber
contact, the product die Artikelnummer
ends with 1. mit 1. IfWechselt
the colour die
of theFarbe des
viewing Sichtfensters
window changes toauf
red,Rot, wurde
the SPD der Ableiter
was overloaded andberlastet
must be
replaced.
und muss ersetzt werden.
Order no. blue: on stock, usually ready for delivery on the day of order!