Escolar Documentos
Profissional Documentos
Cultura Documentos
Operation Manual
2KEY INSTRUCTION...............................................................................................................................................2
3 OPERATION INTRODUCE...................................................................................................................................4
4 PROGRAM METHOD............................................................................................................................................7
5 PARAMETER SETTING......................................................................................................................................10
7 TROUBLE ELIMINATING..................................................................................................................................13
9 ADDENDUM...........................................................................................................................................................19
1 Summarize
KH322B microcomputer is specially designed and produced for auto laundry. The computer has good credibility
and stabilization, and has maturity functions. It has 8 input signals and 16 relay output signals, and control a
temperature a level sensor at the same time. The KH322B computer use lattice LCD can give a good and friendly
interface; can show the status of the machine in time when the machine is working. LED displays the work status of
each key; help users to watch the machine. Its touch interface is waterproof, dustproof, rust proof and has long
working life. Computer has auto and manual modes, and keys have perfect lock function to avoid wrong operation in
manual mode. The auto mode offers five programs that could be programmed. When run auto program, just press key
Run/Enter, and the process of washing will be completed by itself.
LAUNDRY CONTROLLER
IN S E R T
D E LE TE
Use relay output, no need auxiliary relay, reduce the number of places that could cause fault, and make
maintain more easily.
In auto running, users could look over act temperature and set temperature,.
Longest time of extracting, protect machine and clothes form marring by long time extracting;
Manifold parameter that could be set by users, makes the computer can install flexible;
2Key instruction
Keys Function
Press the key when door is closed, washing start, the door lock automatically. Drum front rotate
XX seconds, stop XX seconds, reverse rotate XX seconds, and then stop XX seconds again, and
cycle as this. Press again to stop wash act.
Press this key cold water in when level is not get the set level, and door lock automatically. Press
again to stop.
Press this key heat act when temperature is not get the set one and there is water in drum, door
lock automatically. Press again to stop.
Press this key drain act, and door lock automatically. Press again to stop. when you select point
function, press this key, the drum forward rotate, press this key ,the drum stop
If high extract number in parameter is 3, the first press choose extract (no high extract act.), the
second press choose high extract 1, the third press choose high extract 2, the fourth press choose
high extract 3, and the fifth press to stop extracting. And the same logic if the parameter is not 3.
When extract acts, others act will be forced act, just as WASH, ADD WATER and DRIAN.
In manual or auto mode, and the act level is higher then the lowest level allow soap act, press for
the first time, the led of soap flicker, if the key dose not be pressed again in 3 seconds soap 1 act,
or soap 2 act, and the third press will start act 3. Act soap work 30 seconds, then stop
automatically, and also can be stop by pressing key SOAP. When you select pump function,
press this key, the pump rotate, press again to stop; When you select slope function, press this
key, the drum slope, press again to stop.
Press this key if level is not get the set level, HOT WATER act, and door lock automatically. Press
again to stop.
When door is open or close (Not lock) press this key 3 seconds, enter the program status.
KH322B Washer Microcomputer Operation Manual 3
When power on press this key for 3 seconds to enter user setup.
In manual mode, press this key to enter the modify mode of rewrite time, temperature, level and
speed.
In auto program edit, press this key 3 seconds to clear all programs.
When door is closed, press this key to startup the program be chose.
3 Operation Introduce
During 10 minutes after the machine is connect to the power, the LCD display soft version and machine type.
pressunloadto skip counting down. The LCD display as follows:
8 Ver x.xx
DM500B-TY1-F06M
Fig 3.1-1
When the value of parameter2-3 is not 0, the screen will enter into screen saver status in period of time, the LCD
display temperature and time, then press any key to come back natural screen.
3.2.1 The machine will enter into door close status if the door is close after counting down is over. The LCD
display as follows:
Prog1 70 22
Please select program
Fig 3.2-1
Note1
Prog1 selected program.
70 current actual temperature.
22 current actual level.
Note2
Hereif you press any key such aswash cool water
drain
extract
heat
soap
hot
water,the machine will enter into manual status.
mm:ss 70 22
washing
Fig 3.2-5
Note1If user dont set time, the wash time increase; if user set time, the wash time decrease, when
counting down is over, the washing stop.
2. Basing on actual, the LCD display cue information:
For examplewashing informationwashing cloth
mm:ss 70 22
washing
Fig 3.2-6
LEDwash LED lighting
adding water informationadding to be set level.
KH322B Washer Microcomputer Operation Manual 5
mm:ss 70 22
add water
Fig 3.2-7
LEDadding water LED lighting.
heating informationheating
mm:ss 70 22
heating
Fig 3.2-8
LEDheating LED lighting.
soap informationadding soap
mm:ss 70 22
soap
Fig 3.2-9
LEDsoap LED lighting.
3. If you want to look over parameter during running, you can press the LCD display as
follows:
mm:ss 70 22
0/22 500rpm
Fig 3.2-10
if user dont press any key ,the machine will come back cue screen in 6 minutes; if user press other
effective key, the machine will go to relevant cue screen; if not using inverter, the speed is not
displaying.
4. During running if you want to modify parameter such as time and temperature, you can press
here the time reverse video, the user can pressor to modify the time .
mm:ss 35/70
0/22 500rpm
Fig 3.2-11
Press againthe temperature reverse video, the user can press orto modify the
temperature.
mm:ss 35/70
0/22 500rpm
Fig 3.2-12
Press againthe level reverse video, the user can pressorto modify the level.
mm:ss 35/70
0/22 500rpm
Fig 3.2-13
Prog1 70 22
Please select program
Fig 3.3-1
herepressorto select automatic program, for example, when you select program 3,the
LCD display as follows:
Prog3 70 22
Please select program
Fig 3.3-2
If the user want to run the selected program, you can press .The LCD display as follows:
If the user want to look over information ,you can press the operation process is the same as
3.2.2 section.
Prog1 Step1 mm:ss
35/70 0/20
Fig 3.3-6
If any key dont be pressed in 6 minutes, the machine will come back cue screen.
KH322B Washer Microcomputer Operation Manual 7
4 Program method
4.1.1 when door is open or close(unlock),pressprogramfor3 minutes, the machine will enter into program screen:
Prog 1
Please select program
Fig 4.1-1
If the user want to select other program ,pressorto change program number.
4.1.2 Programming status
after selecting program, press to enter into programming status, the LCD display as follows
Prog1 step1
mm:ss 70 20
if the user want to delete the whole program, you can press for 3 minutes after cursor
disappearing.
4.1.4 Leave factory program
There are 5 programs in machine, they are standard, bedsheet , tablecloth, cloth and towel.
4.1.5 Programming example
if we want to edit simple program:
main wash
1.cool water middle level standard wash 0 minutes 70soap1
assistant wash
KH322B Washer Microcomputer Operation Manual 8
Explanation:
Step1: adding cool water, adding soap, then washing ,when the level arrive to middle level, the step is
over, and entering into step2.
Step2:allowing to add water, after heating to70,stopping heating, then after washing for 10 minutes, the
step is over, and entering into step3.( allowing to supplement heating )
Step3: drain for 30 minutes.
Step4: after adding water to middle level, entering into step5.
Step5: washing and adding water to high level. when the level arriving to high level, the machine start
to counting down, program will enter into step6 in 5 minutes.
Step6: middle extracting for 3 minutes.
If we want to edit program2 the same as above program, the process is as follows:
1settle the step of being edited program, and consult above method of wash.
2after connecting to power, pressprogramfor 3 minutes, the machine will enter into programming status,
then select program 2.
3 because there are other steps in program, so you should delete program firstly. press for 3
minutes, you will delete whole program, here, the time and level is 0,but the temperature is 70.
4 Prog2 Step1:presscool water,cool water LED lighting: press to shift cursor to the level,
modify the level to middle level: presssoap1,soap1LED lighting: presswashto select washing; the
time is set to 0.
5press to shift cursor to the step, then modify step ,the LCD displays follows: Prog2 Step2
,presscool water,adding water LED lighting; pressheat, heating LED lighting; press to
shift cursor to the level, modify the level to middle level; press to shift cursor to the time, modify
6 press to shift cursor to the step, then modify step ,the LCD displays follows: Prog2
Step3;pressdrain,drain LED lighting; press to shift cursor to level, modify the level to
7 press to shift cursor to the step, then modify step ,the LCD displays follows: Prog2
Step4;presscool water,cool water LCD lighting; modify the level to middle level ; modify the time
to 0 minute.
KH322B Washer Microcomputer Operation Manual 9
8press to shift cursor to the step, then modify step ,the LCD displays follows: Prog2 Step5;
presscool water,cool water LCD lighting; presswashto select washing model; modify the level to
high level ; modify the time to 5 minute.
9 press to shift cursor to the step, then modify step ,the LCD displays follows: Prog2
10press to shift cursor to the step, then pressorto modify step ,you can look over editing
step.
11after editing program, pressstop to exit.
4 .1.6 Program skill
1) the machine have automatic supplanting-heating function, when automatic program is running and the
step of the program must have heating action.
Note manual status there not automatic supplanting-heating function; automatic status,
press heatto cancel automatic supplanting-heating function, press the key again to get back the
function.
2 when automatic program is running, if the current step have adding water action, but hasnt washing
action, the time dont count down until the level arriving ; if the current step have heating action, but
hasnt washing action, the time dont count down until the temperature arriving. The manual time is in
the similitude of automatic time
3 when automatic program is running, if the current step have adding water action, and have washing
action, the machine start to wash and count down, the time dont stop counting down until the level
arriving ; if the current step have heating action, and have washing action, the machine start to wash and
count down, the time dont stop counting down until the temperature arriving. The manual time is in the
similitude of automatic time
4when automatic program is running, the condition of program ending is: when the current step is over,
and next step hasnt effect action such as adding water heating draining mid extract high
extract washsoaphot water. In a word, when condition is satisfying during running, the machine will
stop running program immediately and dont operate next step(even if next step is edited .Otherwise,
every program only have 30 steps, after the program running to 30 steps, it will stop.
Note: adding water meaning: when the current step have high level or middle level or low level and
adding cool water or hot water action, but actual level dont arrive to setting level.
KH322B Washer Microcomputer Operation Manual 10
5 Parameter setting
5.1 During 10 minutes after connecting to power, press for 3 minutes to enter into setting screen:
User setting
1>Initialize
5.1-1
pressorto select item.
For examplelevel setting, the screen is as follows:
User setting
5>level setting
5.1-2
inverter setting, the screen is as follows:
User setting
11>inverter setting
5.1-3
5.2 Entering into setting:
For example1:to modify motor type parameter, user pressorto select ,then press to enter ,
1motor type
Much speed
5.1-5
the motor type have 3 selections: much speedinverterno set, but the LCD area is too small to display three
parameters. The user can pressor to select parameter. If the user complete setting, you can press
stopto exit current menu.
For example2,:to modify level setting parameter ,user pressor to select ,then press to
items. The user can pressorto select item, then press to enter into the item, and level value
Low level 20
Mid level
5.1-7
pressstopto exit the current menu.
5.3 Exiting programming status
Pressstopfor 3 minutes to exit the programming status..
KH322B Washer Microcomputer Operation Manual 12
6.1.1 during manual status, the door open, the screen is as follows:
mm:ss 70 22
Plea.close door
5.11
Notewhen the door is open, the machine dont alarm, but the machine display prompt.
6.1.2 during automatic status, the door open, the screen is as follows:
The door is open
pressstopto exit
5.12
the user can solve alarm basing on prompt, at the same time, the machine will exit automatic status
and the screen display the same as fig 5.1-1.
6.2 Trouble
7 Trouble eliminating
7.1 Question: when you press rightful or wrongful key, whether there is brief taratantara?
Answer: Yes, but the sound is too low to unheard at times because of noise. You can judge whether
the key is right basing on sound.
7.2 Question: why the indicator light don t light after pressingheatkey?
Answer: There may be two reasons:
(1) There is no water in barrel, or the level dont arrive to setting level, or the level switch is bad.
(2) Theheatkey is bad or not sensitive. Please contact seller.
7.3 Question: why the indicator light don t light after pressingcool waterkey?
Answer: There are several reasons:
(1) The level has arrived or exceeds the setting level.
(2) The level switch is bad.
(3) Thecool wateris bad or not sensitive. Please contact seller.
7.4Question:The indicator light lights after pressingcool water,but there is no water inputting.
Why?
Answer: There may be several reasons:
(1) Cool water switch is bad.
(2) The fuse is blown out on the microcomputer.
(3) The internal relay is bad. (after pressingcool waterkey,you carefully hear sound from the relay .
(4) The microcomputer internal trouble.
7.5Question:whether the manual operation is be timed? How to time?
Answer: During manual status, press to shift cursor to time, pressorall the time to fast
adjust time, then the machine start to count down after loosening the key.
7.6Question:The door close, but the LCD display door open, please close door the all the same,
why?
AnswerThere may be several reasons:
(1) Whether cool water switch is bad.
(2) Whether the fuse is blown out on the microcomputer?
(3) The microcomputer internal trouble.
7.7Question:During heating, why the water temperature does t rise and the LCD display 50
all the time?
Answer: There are several reasons:
(1)The temperature sensor is correctly installed or bad.
(2)The steam valve is plugged.
KH322B Washer Microcomputer Operation Manual 14
Inverter stop wash wash extract balance mid hig hig hig get get
fr rr fr extr extr1 extr2 extr3 fr rr
Speed 1 0 0 0 0 1 0 1 0 1 0 0
Speed 2 0 0 0 0 0 1 1 0 0 1 1
Speed 3 0 0 0 0 0 0 0 1 1 1 1
Fr 0 1 0 1 1 1 1 1 1 1 0
Rr 0 0 1 0 0 0 0 0 0 0 1
Clutch 0 0 0 0 0 0 0 0 0 0 0
Delta_A/B stop wash wash extract balance mid hig hig hig get get
fr rr fr extr extr1 extr2 extr3 fr rr
Speed 1 0 1 1 1 0 1 0 1 0 1 1
Speed 2 0 0 0 0 1 1 0 0 1 1 1
Speed 3 0 0 0 0 0 0 1 1 1 1 1
Fr 0 1 0 1 1 1 1 1 1 1 0
Rr 0 0 1 0 0 0 0 0 0 0 1
Clutch 0 0 0 0 0 0 0 0 0 0 0
KH322B Washer Microcomputer Operation Manual 16
Much speed stop wash wash extract balance mid hig hig hig get get
motor fr rr fr extr extr1 extr2 extr3 fr rr
Speed 1 0 0 0 0 1 0 0 0 0 0 0
Speed 2 0 0 0 0 0 1 0 0 0 0 0
Speed 3 0 0 0 0 0 0 1 0 0 0 0
Fr 0 1 0 1 0 0 0 0 0 1 0
Rr 0 0 1 0 0 0 0 0 0 0 1
Clutch 0 1 1 1 1 0 0 0 0 1 1
Note1)inverter
when base=0
output SS3=0SS2=0SS1=0 is wash speed
output SS3=0SS2=0SS1=1 is balance speed
output SS3=0SS2=1SS1=0 is middle extract speed
output SS3=0SS2=1SS1=1 is high extract speed 1
output SS3=1SS2=0SS1=0 is high extract speed 2
output SS3=1SS2=0SS1=1 is high extract speed 3
output SS3=1SS2=1SS1=0 is getting cloth speed
when base=1
output SS3=0SS2=0SS1=1 is wash speed
output SS3=0SS2=1SS1=0 is balance speed
output SS3=0SS2=1SS1=1 is middle extract speed
output SS3=1SS2=0SS1=0 is high extract 1 speed
output SS3=1SS2=0SS1=1 is high extract 2 speed
output SS3=1SS2=1SS1=0 is high extract 3 speed
output SS3=1SS2=1SS1=1 is getting cloth speed
2)delta
when base=0
output SS3=0SS2=0SS1=1 is wash speed
output SS3=0SS2=1SS1=0 is balance speed
output SS3=0SS2=1SS1=1 is middle extract speed
output SS3=1SS2=0SS1=0 is high extract 1 speed
output SS3=1SS2=0SS1=1 is high extract 2 speed
output SS3=1SS2=1SS1=0 is high extract 3 speed
output SS3=1SS2=1SS1=1 is getting cloth speed
when there is no getting cloth speed, the base can be set to 1:
output SS3=0SS2=1SS1=0 is wash speed
output SS3=0SS2=1SS1=1 is balance speed
output SS3=1SS2=0SS1=0 is middle extract speed
output SS3=1SS2=0SS1=1 is high extract 1 speed
output SS3=1SS2=1SS1=0 is high extract 2 speed
output SS3=1SS2=1SS1=1 is high extract 3 speed
101.8mm
116mm
181.9mm
196mm
fig 7.21 KH322B forward-board size(196mmX116mmX60mm)
mmmm
130mm
250mm
level air
backboard inverter
AC220V or DC24V
T sensor input1
T sensor input2
output common
cool water
hot water
heat
X1.DM500B.TY1.F06M.Electricity Connection.wash(KH322B).V109A1 drain
soap1/pump
soap2
soap3
horizontal supply/slope
output common
output common
inverse rotate
forward rotate
input common
imergency stop
input common
overload
clutch
speed3
speed2
speed1
brake
shock
spare
spare
spare
spare
door
A1
A0
B1
B0
double 9.8V
9W
transformer
input AC220V
9 Addendum
1 Initialize
2 Motor &model
3 Basic setting
5 Level control
10 Temperature
1 manual temperature700~99
2 program temperature700~99
3 highest temperature950~99
4 lowest temperature50~99
13 Download
Initialize 5 program
9. 3 Program table
KH322B Washer Microcomputer Operation Manual 23
User table