Escolar Documentos
Profissional Documentos
Cultura Documentos
Page 1
MGD2004D SERIES LCD MODULE
3.0 ELECTRICAL CHARACTERISTICS
0C 4.75 5 5.25
Recommended LC Driving Vdd - Vo 25C 4.75 5 5.25 V
Voltage (Standard Temp)
50C 4.75 5 5.25
Vdd=5.0V, -
Power Supply Current Idd 1.5 2.0 mA
fosc=270kHz
Page 2
MGD2004D SERIES LCD MODULE
5.0 OPTICAL CHARACTERISTICS (Ta=25C, Vdd= 5.0V0.25V, STN LC fluid)
Page 3
MGD2004D SERIES LCD MODULE
7.0 PIN ASSIGNMENT 8.0 POWER SUPPLY
Page 4
MGD2004D SERIES LCD MODULE
VIH1 VIH1
RS VIL1 VIL1
t SU tH
VIH1 VIH1
DB0~DB7 Valid Data
VIL1 VIL1
tC
VIH1 VIH1
RS VIL1 VIL1
t SU tH
V IH1 VIH1
R/W
tW tH
tF
VIH1 VIH1
E
VIL1 VIL1 VIL1
tR
t DSU t DH
tD
VIH1 VIH1
DB0~DB7 Valid Data
VIL1 VIL1
tC
Page 5
MGD2004D SERIES LCD MODULE
10.0 MECHANICAL DIAGRAM
Page 6
MGD2004D SERIES LCD MODULE
11.0 RELIABILITY TEST
Evaluations and Assessment*
Storage Condition Content Current Oozing Contrast Other Appearances
Consumption
Operation at high 40C,90% Twice initial none More than 80% of No abnormality
temperature and RH,240hrs value or less initial value
humidity
High temperature 60C, Twice initial none More than 80% of No abnormality
storage 240hrs value or less initial value
Low temperature -20C, Twice initial More than 80% of No abnormality
storage 240hrs value or less initial value
*Evaluations and assessment to be made two hours after returning to room temperature (25C5C).
*The LCDs subjected to the test must not have dew condensation.
Page 7
MGD2004D SERIES LCD MODULE
13.0 DISPLAY INSTRUCTION TABLE
Cursor / 0 0 0 0 0 1 S/C R/L x x Moves cursor or shifts the display w/o 40s
Display changing DD RAM contents
Shift S/C=0: Cursor Shift (RAM unchanged)
S/C=1: Display Shift (RAM unchanged)
R/L=1: Shift to the Right
R/L=0: Shift to the Left
Set CG RAM 0 0 0 1 Character Generator (CG) RAM Sets CG RAM address. CG RAM data 40s
Address Address is sent and received after this
instruction.
Set DD RAM 0 0 1 Display Data (DD) RAM Address / Sets DD RAM address. DD Ram data 40s
Address Cursor Address is sent and received after this
instruction.
Busy Flag / 0 1 B Address counter used for both DD & Reads Busy Flag (BF) and address 40s
Address Read F CG RAM address counter contents.
Write Data 1 0 Write Data Writes data into DDRAM or CGRAM. 46s
Read Data 1 1 Read Data Reads data from DDRAM or CGRAM. 46s
X: Don't Care
Page 8
MGD2004D SERIES LCD MODULE
14.0 STANDARD CHARACTER PATTERNS
Note: The character generator RAM is the RAM with which the user can rewrite character patterns by program.
Page 9