Você está na página 1de 2

Q: 01

Name

Q: 02

A: An employee was driving truck with load, an accident took place, truck toppled over and
fallen down, and unfortunately employees leg and arm broke down.

B:1-Raising and lowering load easily and patiently is one the important precaution in a way that,
when load is lowered or raised in haste ,it causes accidents ,some worker collide or they might
fall down that could harm them.

2-Lift truck should not be overloaded; it will save drivers from accidents on the road.

3-Counter weights should not be used for increasing capacity, this is important in a way that it
increases efficiency of trucks and deliveries are delivered on time if this precaution is followed
driver might drive unsafe to reach on time and face accident and injuries.

4-Load should be centered on the forks, it keep balance maintained and help in avoiding any
accidents.

5-Making sure that load will clear overheads is one the most important precaution that help
avoiding any problems due to overheads and keeps from possible delays.

6-Checking floor of the truck for weak spots and cracks is an important precaution, as it saves
from goods leaking and loss because of cracks on the floor ,that cracks can also be dangerous for
health of the perishable goods and worker may also fall down from that weak spots on the floors
and may get injured because of that.

Q: 03

A-A lift truck operator was driving reverse ,he could not see his coworker and stuck him ,that
coworker got injured and his leg was cut off.

B:

1-Liftruck should not driven with extra drivers or passengers, it helps avoid confusions between
riders and help in avoiding accidents.

2-No rider or worker should jump on moving lift truck, because they may fall down or might not
enter in that and get injured, so if they follow this precaution, they will be safe from such
injuries.

3- Controls should not be operated outside the operators platform, it would save from injuries
that could be because of loads or, moving parts.
4-It should not be directly to worker on foot, with this operator can lose control and worker
might get injured.

Q: 04

A- An employee was moving pallets with lift truck, he used and backed into chain ,he stuck
between operators platform and chain and died because he could not free himself.
B- 1-All parts of body should be kept in operators platform area ,it decreases the chances of
injuries in a way that they will be pinned or stuck between chains etc .
2-Forks should not be rammed against objects or load, it is important in a way that load
could fall and coworker might get inured, following this precaution will help in avoiding
such accidents.

Q: 05

A- An employee was lifting objects from shelves, and suddenly fall down on the ground , his
coworker tried to pick him with lifter but did not lift safely and employee again fall down
and his skull broke down and died .
B- 1: Never try to pick worker while standing on forks or pallets, it could lose balance and
control of the vehicle and lifted worker might face more injuries than before.
2: Platform should be raised and lowed patiently; it would help in avoiding any loss or
accident because of haste or loss of control of vehicle or operating system.

Q: 06

A-An employee was using forklift to lift gypsum and at that time several lifts fall on the cab,
employee and guard crushed and died.

B: 1-Operators manual of lifting devices must ne consulted ,it guides lifter and help in avoiding
any accidents and injuries that could be because of having less knowledge about lifts.

2:If any lifer ,vehicle or device is having any problem ,keys must be remove and tag out of
service must be place, it will be signal for other coworker ,they will not use that and be safe
from any unwanted situation.

Você também pode gostar