Você está na página 1de 4

Atlas Copco Underground loaders

Scooptram ST1520LP
Technical specification

The 15 tonne capacity low profile Scooptram ST1520LP


underground loader features state of the art levels of safety,
serviceability and operator comfort, providing unmatched
performance in any underground operation where the work
height is as low as 2700mm.

Features
Safe working environment Peak performance
ISO ROPS/FOPS enclosed cabin (optional) Clean burning Tier 3 / Stage IIIA engine
Door interlock (applies brakes, blocks steering and bucket/ L&M V-tube Core radiator
boom movement when door opens) Fully modulated automatic transmission
Boom up locking device Limited slip front differential
Spring applied hydraulic released (SAHR) brakes An enhanced boom and load frame geometry optimizes
Wider windows for safety and enhanced operator visibility digging performance
supported by cameras De-clutch function for more efficient truck loading

Superior operators comfort Serviceability


Spacious Atlas Copco Footbox Centralized service bay
Forward and rear cameras connected to the cab monitor. Central manual lubrication
The cameras are linked to the transmission to synchronize Hydraulic test ports
rear and forward view Easy access to service points, filters and valve blocks
Side view camera and monitor Tapered roller bearing articulation joint
Low vibration level in cab Trunnion cap mounted steering cylinders & bucket linkage
Reduced sound level in the cab
A durable, adjustable suspension seat
Dump & hoist control located forward of the right armrest
Door mounted monostick steering control
Extended wheel base for a steady ride while tramming
Scooptram ST1520LP

Specifications
Capacities Motion times Weights
kg Tramming capacity 15000 sec Boom raising 7.3 Standard equipped vehicle (empty bucket)
Breakout force, hydraulic 25 500 Boom lowering 5.0
kg Approximate weight 41 500
Breakout force, mechanical 21 700 sec Dumping 2.3 Axle load, front end 19 600
m 3
Standard bucket volume (nominal heaped) 6.8 Axle load, rear end 21 900

Engine Operators compartment


Cummins Diesel Engine................ QSX15, Tier 3/Stage IIIA Cabin/Canopy; ISO ROPS/FOPS (approved at 60 KJ)
Power Rating at 2 000 rpm............................ 291 kW/390 hp Side seated operator for bi-directional operation
Maximum torque at 1 200 rpm............................... 1 825 Nm KAB seat with retractable seat belt
Catalytic exhaust purifier and silencer Open door retainer
Dry type air cleaner Two pilot operated joysticks for steering, dump & hoist
Exhaust heat protection controls
Remote engine oil drain Enclosed operators cabin (optional)
V-tube core radiator

Upbox Hydraulic system


Swepart
Power transmitted through a 1:1 gear ratio box Ride control - includes 2 accumulators for loaded and empty
Integrated lubrication tramming
Bucket float
Heavy duty gear type pumps
Transmission and converter System pressure.......................................................20.7 MPa
Automatic power shift with integrated converter, fully Hydraulic tank capacity........................................... 221 litres
modulated 4 speed shifting, forward/reverse Filtration, return line.................................................. 12.0 m
Dana . ..............................................................................TE32 Cylinders, doubble acting, chrome plated stems, diameter:
Steer cylinders (2)............................................. 125 mm
Axles Hoist cylinders (2)............................................. 216 mm
Stabilizer cylinder............................................. 267 mm
Spiral bevel differential, full floating, planetary wheel end
drive
Dana . ................................................................................53R Fuel
Degree of oscillation (total)...............................................16
Differentials: Fuel tank capacity.................................................... 530 litres
Front............................................................ Limited slip Fuel filtration................................................................ 8.0 m
Rear....................................................................No spin Anti-siphon fuel supply

Brakes Other
Fully enclosed, force cooled, multiple wet discs at each Boom up locking device
wheel end Audio-Visual reverse alarm
Service/parking/emergency..........................................SAHR Central manual lubrication system
Fire extinguisher
Electrical System
System voltage................................. Start & accessories 24 V
Alternator, high output ........................................... 140 Amps
Hydraulic low level warning system
Battery isolation swith lockout
LED lights

Tyres
Tubeless, extra deep tread design for underground mine
service
Tyre size........................................................... 29.5 R 25,L5*

* As applications and conditions vary, Atlas Copco recommends that the


user consults with tyre suppliers to obtain the optimum tyre selection.
Scooptram ST1520LP

Grade performance
Standard configuration, bucket empty
% Grade 0.0 2.0 4.0 6.0 8.0 10.0 12.5 14.3 16.0 18.0 20.0 25.0

km/h 1st gear 6.2 6.1 6.0 5.9 5.8 5.7 5.6 5.5 5.5 5.4 5.3 5.0
2nd gear 12.1 11.7 11.4 11.0 10.6 10.2 9.5 8.9 8.3 7.4 6.6
3rd gear 20.6 19.4 18.2 16.4 14.0 11.7
4th gear 33.8 29.2 22.2
3% rolling resistance assumed. Actual performance may vary depending on the application.

Standard configuration, bucket loaded


% Grade 0.0 2.0 4.0 6.0 8.0 10.0 12.5 14.3 16.0 18.0 20.0 25.0

km/h 1st gear 5.5 5.4 5.3 5.2 5.1 5.0 4.9 4.8 4.7 4.6 4.4 4.0
2nd gear 10.7 10.3 9.9 9.5 8.9 8.4 7.5 6.7 5.9 5.0
3rd gear 18.1 16.8 15.1 12.9 9.6
4th gear 29.2 23.2 14.8 6.7
3% rolling resistance assumed. Actual performance may vary depending on the application.

Optional Equipment

Main frame Controls and instruments


Optional bucket sizes Blockout 3rd and/or 4th gears
EOD buckets, recommended for truck loading Blockout 3rd gear
Shipping covers Brake release retriever tow book
Knockdown construction
Power unit
Ergonomics Epoxy coated radiator
Enclosed operator cabin Cold weather package 120V or 240V:
Heater - Block heater
Air conditioner - Battery warmer
- Fuel heater
System - Arctic oil
Ansul manual fire supression system with engine
shutdown Documentation
Ansul automatic fire suppression LinkOne parts catalogue, CD
Electric fill pump for hydraulic oil Operators and maintenance manual - plasticized
Fire extinguisher - 4.5 kg
Lincoln auto lube with timer Parts and services
Loadrite payload weighing system 1 000 hour consumables
Wiggins fast fuel fill Face mechanics tool set
Scooptram RRC interface only Shop mechanics tool set
Scooptram RRC (line of sight radio remote
control)

Electrical system
Amber strobe light - power on
Scooptram ST1520LP

Measurements
Dimensions
All dimensions are shown in millimetres
42,5 All dimensions and calculations shown are
based on standard vehicle configuration with
5 006 27mm tyre deflection, unloaded

Copyright 2010, Atlas Copco Rock Drills AB, rebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos
may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
R7 116
R3 586
R7 541

4 101
2 000X 45 CHAMFER
5 006
TURNING RADIUS

6000
(H1)

5883

5535

4130
3810
2365
2301 (H2)
2035
1865
(T2)
12.8 441
3710
3545 2080 1985
(T1)
4065 3150
11320
2070
SIde View std (L1)

2 920 2 648
(W)

1 800

TOP view std

BUCKET DATA STD


Volume, nominal heaped (m3) 7.5 6.8 6.2 5.8
Maximum material density (t/m3) 2.0 2.2 2.4 2.6
Width, bucket (mm) W 2 920 2 920 2 920 2 920

Tramming position: Axle centerline to bucket lip (mm) T1 3 710 3 565 3 450 3 300
9851 2734 01d

Tramming position: Ground to bucket tip (mm) T2 1 865 1 730 1 635 1 505

Truck loading reach: (mm) L1 2 070 1 920 1 810 1 660


08/2010

Raised position: Back height, max. (mm) H1 6 000 6 000 6 000 6 000

Raised position: Bucket tip, height (mm) H2 2 365 2 490 2 585 2 720

Você também pode gostar