Você está na página 1de 8

Code No: 117EP Set No.

1
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September-2017
MECHANICAL BEHAVIOUR OF NANO MATERIALS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.

I. Choose the correct alternative:

1. Synthesizing and processing of functional materials for high technology emphasize the ___ to assemble
atoms, molecules, and particles, from the atomic or molecular scale to the macroscopic scale. [ ]
A) bottom-up approach only B) Top down approach only C) Either A or B D) Both A and B

2. ____________ nucleation does not involve foreign species as nucleating aids. [ ]


A) Heterogeneous B) Homogeneous C) Diverse D) None

3. The _____________growth of a small particle in solution becomes _____________after the particle


exceeds a critical size. [ ]
A) interface controlled, interface controlled B) diffusion controlled, interface controlled
C) interface controlled, diffusion controlled D) diffusion controlled, diffusion controlled

4. Surfactants are classified as [ ]


A) cationic, zwitterionic, non-ionic B) anionic, cationic, zwitterionic, non-ionic
C) anionic, cationic, non-ionic D) zwitterionic, non-ionic

5. Chemical methods used to synthesize ceramic nano particles are [ ]


A) precipitation B)solgel processing C) None D) Both A and B

6. The general formula Metal alkoxides is ____________ [ ]


A) M-O B) M(OR)x C) M-Ox D) Mx(OR)x

7. Which of the following is a method for top-down approach for synthesizing nano structured materials?
[ ]
A) High energy ball milling B) spray pyrolysis
C) chemical vapor condensation D) electrodeposition

8. Which is/are the important properties of nano structured materials? [ ]


A) the size (grain size and phase size) B) composition and distribution of phases
C) the nature of the interfaces. D) All of these

9. Which of the following Method is used for both in liquid and gas phase to synthesize Nano structured
Materials. [ ]
A) Chemical vapor condensation B) Chemical reactions
C) Rapid solidification D) Electrodeposition

10. The maximum grain size (dmax) is dependent on [ ]


A) particle size B) volume fraction C)Temperature D) Both A and B

Cont..2
Code No:117EP :2: Set No. 1

II Fill in the Blanks

11. Nano structured materials are often characterized by a physical dimension of less than _________

12. The formation of narrow areas with high dislocation density are called as _________________.

13. The yield stress required to deform a polycrystalline material by dislocation movement is related to the
average grain size d by __________________ .

14. The particle surface becomes important in nano powders due to the __________________in surface area.

15. Expression for GibbsThomson effect ___________________

16. The strain rate sensitivity of nano crystalline metals is _____________than for coarse-grain materials.

17. _______________method controls the crystallization kinetics by optimizing the heat treatment
conditions.

18. _________________ nucleation allows formation of nuclei on foreign species.

19. _____________ are closed bilayer membrane assemblies.

20. The first step in Inert-gas condensation (IGC) is _________________.

-oOo-
Code No: 117EP Set No. 2
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September-2017
MECHANICAL BEHAVIOUR OF NANO MATERIALS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.

I. Choose the correct alternative:

1. Surfactants are classified as [ ]


A) cationic, zwitterionic, non-ionic B) anionic, cationic, zwitterionic, non-ionic
C) anionic, cationic, non-ionic D) zwitterionic, non-ionic

2. Chemical methods used to synthesize ceramic nano particles are [ ]


A) precipitation B)solgel processing C) None D) Both A and B

3. The general formula Metal alkoxides is ____________ [ ]


A) M-O B) M(OR)x C) M-Ox D) Mx(OR)x

4. Which of the following is a method for top-down approach for synthesizing nano structured materials?
[ ]
A) High energy ball milling B) spray pyrolysis
C) chemical vapor condensation D) electrodeposition

5. Which is/are the important properties of nano structured materials? [ ]


A) the size (grain size and phase size) B) composition and distribution of phases
C) the nature of the interfaces. D) All of these

6. Which of the following Method is used for both in liquid and gas phase to synthesize Nano structured
Materials. [ ]
A) Chemical vapor condensation B) Chemical reactions
C) Rapid solidification D) Electrodeposition

7. The maximum grain size (dmax) is dependent on [ ]


A) particle size B) volume fraction C)Temperature D) Both A and B

8. Synthesizing and processing of functional materials for high technology emphasize the ___ to assemble
atoms, molecules, and particles, from the atomic or molecular scale to the macroscopic scale. [ ]
A) bottom-up approach only B) Top down approach only C) Either A or B D) Both A and B

9. ____________ nucleation does not involve foreign species as nucleating aids. [ ]


A) Heterogeneous B) Homogeneous C) Diverse D) None

10. The _____________growth of a small particle in solution becomes _____________after the particle
exceeds a critical size. [ ]
A) interface controlled, interface controlled B) diffusion controlled, interface controlled
C) interface controlled, diffusion controlled D) diffusion controlled, diffusion controlled

Cont..2
Code No:117EP :2: Set No. 2

II Fill in the Blanks

11. The particle surface becomes important in nano powders due to the __________________in surface area.

12. Expression for GibbsThomson effect ___________________

13. The strain rate sensitivity of nano crystalline metals is _____________than for coarse-grain materials.

14. _______________method controls the crystallization kinetics by optimizing the heat treatment
conditions.

15. _________________ nucleation allows formation of nuclei on foreign species.

16. _____________ are closed bilayer membrane assemblies.

17. The first step in Inert-gas condensation (IGC) is _________________.

18. Nano structured materials are often characterized by a physical dimension of less than _________

19. The formation of narrow areas with high dislocation density are called as _________________.

20. The yield stress required to deform a polycrystalline material by dislocation movement is related to the
average grain size d by __________________ .

-oOo-
Code No: 117EP Set No. 3
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September-2017
MECHANICAL BEHAVIOUR OF NANO MATERIALS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.

I. Choose the correct alternative:

1. The general formula Metal alkoxides is ____________ [ ]


A) M-O B) M(OR)x C) M-Ox D) Mx(OR)x

2. Which of the following is a method for top-down approach for synthesizing nano structured materials?
[ ]
A) High energy ball milling B) spray pyrolysis
C) chemical vapor condensation D) electrodeposition

3. Which is/are the important properties of nano structured materials? [ ]


A) the size (grain size and phase size) B) composition and distribution of phases
C) the nature of the interfaces. D) All of these

4. Which of the following Method is used for both in liquid and gas phase to synthesize Nano structured
Materials. [ ]
A) Chemical vapor condensation B) Chemical reactions
C) Rapid solidification D) Electrodeposition

5. The maximum grain size (dmax) is dependent on [ ]


A) particle size B) volume fraction C)Temperature D) Both A and B

6. Synthesizing and processing of functional materials for high technology emphasize the ___ to assemble
atoms, molecules, and particles, from the atomic or molecular scale to the macroscopic scale. [ ]
A) bottom-up approach only B) Top down approach only C) Either A or B D) Both A and B

7. ____________ nucleation does not involve foreign species as nucleating aids. [ ]


A) Heterogeneous B) Homogeneous C) Diverse D) None

8. The _____________growth of a small particle in solution becomes _____________after the particle


exceeds a critical size. [ ]
A) interface controlled, interface controlled B) diffusion controlled, interface controlled
C) interface controlled, diffusion controlled D) diffusion controlled, diffusion controlled

9. Surfactants are classified as [ ]


A) cationic, zwitterionic, non-ionic B) anionic, cationic, zwitterionic, non-ionic
C) anionic, cationic, non-ionic D) zwitterionic, non-ionic

10. Chemical methods used to synthesize ceramic nano particles are [ ]


A) precipitation B)solgel processing C) None D) Both A and B

Cont..2
Code No:117EP :2: Set No. 3

II Fill in the Blanks

11. The strain rate sensitivity of nano crystalline metals is _____________than for coarse-grain materials.

12. _______________method controls the crystallization kinetics by optimizing the heat treatment
conditions.

13. _________________ nucleation allows formation of nuclei on foreign species.

14. _____________ are closed bilayer membrane assemblies.

15. The first step in Inert-gas condensation (IGC) is _________________.

16. Nano structured materials are often characterized by a physical dimension of less than _________

17. The formation of narrow areas with high dislocation density are called as _________________.

18. The yield stress required to deform a polycrystalline material by dislocation movement is related to the
average grain size d by __________________ .

19. The particle surface becomes important in nano powders due to the __________________in surface area.

20. Expression for GibbsThomson effect ___________________

-oOo-
Code No: 117EP Set No. 4
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September-2017
MECHANICAL BEHAVIOUR OF NANO MATERIALS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.

I. Choose the correct alternative:

1. Which is/are the important properties of nano structured materials? [ ]


A) the size (grain size and phase size) B) composition and distribution of phases
C) the nature of the interfaces. D) All of these

2. Which of the following Method is used for both in liquid and gas phase to synthesize Nano structured
Materials. [ ]
A) Chemical vapor condensation B) Chemical reactions
C) Rapid solidification D) Electrodeposition

3. The maximum grain size (dmax) is dependent on [ ]


A) particle size B) volume fraction C)Temperature D) Both A and B

4. Synthesizing and processing of functional materials for high technology emphasize the ___ to assemble
atoms, molecules, and particles, from the atomic or molecular scale to the macroscopic scale. [ ]
A) bottom-up approach only B) Top down approach only C) Either A or B D) Both A and B

5. ____________ nucleation does not involve foreign species as nucleating aids. [ ]


A) Heterogeneous B) Homogeneous C) Diverse D) None

6. The _____________growth of a small particle in solution becomes _____________after the particle


exceeds a critical size. [ ]
A) interface controlled, interface controlled B) diffusion controlled, interface controlled
C) interface controlled, diffusion controlled D) diffusion controlled, diffusion controlled

7. Surfactants are classified as [ ]


A) cationic, zwitterionic, non-ionic B) anionic, cationic, zwitterionic, non-ionic
C) anionic, cationic, non-ionic D) zwitterionic, non-ionic

8. Chemical methods used to synthesize ceramic nano particles are [ ]


A) precipitation B)solgel processing C) None D) Both A and B

9. The general formula Metal alkoxides is ____________ [ ]


A) M-O B) M(OR)x C) M-Ox D) Mx(OR)x

10. Which of the following is a method for top-down approach for synthesizing nano structured materials?
[ ]
A) High energy ball milling B) spray pyrolysis
C) chemical vapor condensation D) electrodeposition

Cont..2
Code No:117EP :2: Set No. 4

II Fill in the Blanks

11. _________________ nucleation allows formation of nuclei on foreign species.

12. _____________ are closed bilayer membrane assemblies.

13. The first step in Inert-gas condensation (IGC) is _________________.

14. Nano structured materials are often characterized by a physical dimension of less than _________

15. The formation of narrow areas with high dislocation density are called as _________________.

16. The yield stress required to deform a polycrystalline material by dislocation movement is related to the
average grain size d by __________________ .

17. The particle surface becomes important in nano powders due to the __________________in surface area.

18. Expression for GibbsThomson effect ___________________

19. The strain rate sensitivity of nano crystalline metals is _____________than for coarse-grain materials.

20. _______________method controls the crystallization kinetics by optimizing the heat treatment
conditions.

-oOo-

Você também pode gostar