Escolar Documentos
Profissional Documentos
Cultura Documentos
Connections
Menus
Technical Notes
Troubleshooting
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
Read Instructions: All the safety and not defeat the safety purpose of the This video product should never be An appliance
operating instructions should be polarized plug. placed near or over a radiator or heat and cart com-
read before the appliance is oper- register. bination should
Alternate Warnings: This video
ated. be moved with
product is equipped with a 3-wire Attachments: Do not use attachments
Retain Instructions: The safety and care. Quick stops,
grounding-type plug, a plug having not recommended by the video
operating instructions should be excessive force,
a third (grounding) pin. This plug will product manufacturer as they may
retained for future reference. and uneven sur-
only fit into a grounding-type power cause hazards.
Heed Warnings: All warnings on the faces may cause the appliance and
outlet. This is a safety feature. If you
appliance and in the operating in- Water and Moisture: Do not use this cart combination to overturn.
are unable to insert the plug into
structions should be adhered to. video product near water for ex-
the outlet, contact your electrician Antennas
Follow Instructions: All operating ample, near a bath tub, wash bowl,
to replace your obsolete outlet. Do Outdoor Antenna Grounding: If an
and use instructions should be fol- kitchen sink, or laundry tub, in a wet
not defeat the safety purpose of the outside antenna or cable system is
lowed. basement, or near a swimming pool,
grounding-type plug. connected to the video product, be
and the like.
Installation Overloading: Do not overload wall sure the antenna or cable system
Power Sources: This video product Power-Cord Protection: Power-Sup- is grounded so as to provide some
outlets and extension cords as this
should be operated only from the ply cords should be routed so that protection against voltage surges
can result in a risk of fire or electric
type of power source indicated on they are not likely to be walked on and built-up static charges. Section
shock.
the marking label. If you are not sure or pinched by items placed upon 810 of the National Electrical Code,
of the type of power supply to your Ventilation: Slots and openings in the or against them, paying particular ANSI/NFPA No. 70, provides informa-
home, consult your appliance dealer cabinet are provided for ventilation attention to cords at plugs, conve- tion with respect to proper grounding
or local power company. For video and to ensure reliable operation of nience receptacles, and the point of the mast and supporting struc-
products intended to operate from the video product and to protect it where they exit from the appliance. ture, grounding of the lead-in wire
battery power, or other sources, refer from overheating, and these open- to an antenna-discharge unit, size of
Accessories: Do not place this video
to the operating instructions. ings must not be blocked or cov- grounding conductors, location of
product on an unstable cart, stand,
ered. antenna-discharge unit, connection
Grounding or Polarization: This video tripod, bracket, or table. The video
The openings should never be to grounding electrodes, and require-
product is equipped with a polar- product may fall, causing serious in-
blocked by placing the video prod- ments for the grounding electrode.
ized alternating-current line plug (a jury to a child or adult, and serious
uct on a bed, sofa, rug, or other simi-
plug having one blade wider than damage to the appliance. Use only
lar surface.
the other). This plug will fit into the with a cart, stand, tripod, bracket, or
This video product should not be
power outlet only one way. This is a table recommended by the manu-
placed in a built-in installation such
safety feature. If you are unable to in- facturer, or sold with the video prod-
as a bookcase or rack unless proper
sert the plug fully into the outlet, try uct. Any mounting of the appliance
ventilation is provided or the man-
reversing the plug. If the plug should should follow the manufacturers in-
ufacturers instructions have been
still fail to fit, contact your electrician structions, and should use a mount-
adhered to.
to replace your obsolete outlet. Do ing accessory recommended by the
manufacturer.
ii
For Your Safety
Power Lines: An outside antenna sys- Use Service Replacement Parts: When replace-
tem should not be located in the Cleaning: Unplug this video product Servicing: Do not attempt to service ment parts are required, be sure
vicinity of overhead power lines or from the wall outlet before clean- this video product yourself as open- the service technician has used
other electric light or power circuits, ing. Do not use liquid cleaners or ing or removing covers may expose replacement parts specified by the
or where it can fall into such power aerosol cleaners. Use a damp cloth you to dangerous voltage or other manufacturer or have the same
lines or circuits. When installing an for cleaning. hazards. Refer all servicing to quali- characteristics as the original part.
outside antenna system, extreme fied service personnel. Unauthorized substitutions may
care should be taken to keep from Object and Liquid Entry: Never push result in fire, electric shock or other
touching such power lines or circuits objects of any kind into this video Damage Requiring Service: Unplug this hazards.
as contact with them might be fatal. product through openings as they video product from the wall outlet
may touch dangerous voltage and refer servicing to qualified ser- Safety Check: Upon completion of any
EXAMPLE OF ANTENNA GROUNDING points or short out parts that could vice personnel under the following service or repairs to this video prod-
AS PER NATIONAL ELECTRICAL CODE result in a fire or electric shock. Never conditions: uct, ask the service technician to
Ground Clamp Antenna spill liquid of any kind on the video When the power-supply cord or perform safety checks to determine
product. plug is damaged. that the video product is in proper
Lead in Wire
If liquid has been spilled, or objects operating condition.
Electric Lightning: For added protection for
have fallen into the video product.
Service this video product receiver during
If the video product has been ex-
Equipment a lightning storm, or when it is left
posed to rain or water.
Antenna unattended and unused for long pe-
If the video product has been
Ground Discharge Unit riods of time, unplug it from the wall
dropped or the cabinet has been
Clamps (NEC SECTION outlet and disconnect the antenna
damaged.
810-20) or cable system. This will prevent
Power Service If the video product does not op-
Grounding damage to the video product due to
Grounding Electrode erate normally be following the
Conductors lightning and power-line surges.
System (NEC ART 250. operating instructions. Adjust only
PART H) (NEC SECTION
those controls that are covered by
810-21)
the operating instructions as an im-
proper adjustment of other controls
may result in damage and will often
require extensive work by a qualified
technician to restore the video prod-
uct to its normal operation.
When the video product exhibits a
distinct change in performance - this
indicates a need for service.
iii
For Your Safety
iv
For Your Safety
WARNING
Do not heat, change or take apart the battery. Do not drop or subject the bat-
tery to impacts. Do not store the battery with metallic products. Do not use
chargers other than the specified model to charge the battery.
Any of these actions can cause the battery to burst or leak and cause
fire or injury as a result.
Use only the battery or AC power adapters specified for use with this camera.
Do not use voltages other than the power supply voltage shown.
The use of other power sources can cause a fire.
If the battery leaks and fluid gets in contact with your eyes, skin or clothing.
Flush the affected area with clean water and seek medical attention or call an
emergency number right away.
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
When carrying the battery, install it in a digital camera or keep it in the hard
case. When storing the battery, keep it in the hard case. When discarding,
cover the battery terminals with insulation tape.
Contact with other metallic objects or battery could cause the bat-
tery to ignite or burst.
Keep Memory Cards out of the reach of small children.
Because Memory Cards are small, they can be swallowed by children.
Be sure to store Memory Cards out of the reach of small children. If
a child swallows a Memory Card, seek medical attention or call an
emergency number.
Turn the camera off in crowds.
The camera emits radio-frequency radiation that may interfere with
pacemakers.
Turn the camera off in the vicinity of automatic doors, public address systems,
and other automatically controlled devices.
The camera emits radio-frequency radiation that may cause these
devices to malfunction.
Keep the camera at least 22cm (0.7 ft.) away from people wearing pacemakers.
The camera emits radio-frequency radiation that may interfere with
pacemakers.
Hot shoe cover
Keep out of the reach of small children.
v
For Your Safety
CAUTION CAUTION
Do not use this camera in locations affected by oil fumes, steam, humidity or Remove your fingers from the flash window before the flash fires.
dust. Failure to observe this precaution could result in burns.
This can cause a fire or electric shock. Keep the flash window clean and do not use the flash if the window is ob-
Do not leave this camera in places subject to extremely high temperatures. structed.
Do not leave the camera in locations such as a sealed vehicle or in Failure to observe these precautions could cause smoke or discolor-
direct sunlight. This can cause a fire. ation.
Keep out of the reach of small children.
This product could cause injury in the hands of a child.
Do not place heavy objects on the camera.
This can cause the heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still connected. Do not
pull on the connection cord to disconnect the AC power adapter.
This can damage the power cord or cables and cause a fire or electric
shock.
Do not use the AC power adapter when the plug is damaged or the plug socket
connection is loose.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the AC power adapter in a cloth or blanket.
This can cause heat to build up and distort the casing or cause a fire.
When you are cleaning the camera or you do not plan to use the camera for
an extended period, remove the battery and disconnect and unplug the AC
power adapter.
Failure to do so can cause a fire or electric shock.
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause a fire.
Using a flash too close to a persons eyes may temporarily affect the eyesight.
Take particular care when photographing infants and young chil-
dren.
When a memory card is removed, the card could come out of the slot too quick-
ly. Use your finger to hold it and gently release the card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric shock.
Contact your FUJIFILM dealer to request internal cleaning every 2
years.
Please note this is not a free of charge service.
vi
For Your Safety
Power Supply and Battery If you are using a heating pad, take this indicates that the battery has Always keep the battery terminals
* Confirm your battery type before read- care not to place the battery di- reached the end of its effective life clean.
ing the following descriptions. rectly against the pad. The camera and should be replaced. Do not store batteries in hot plac-
may not operate if you use a de- es. Also, if you use the battery for
The following explains proper use of Notes on storage
pleted battery in cold conditions. a long period, the camera body
batteries and how to prolong their If a battery is stored for long periods
and the battery itself will become
life. Incorrect use of batteries can Charging the Battery while charged, the performance of
warm. This is normal.
cause shorter battery life, as well as The battery can be charged at the battery can be impaired. If the
leakage, excessive heat, fire or explo- ambient temperatures between battery will not be used for some 2 Camera uses AA Alkaline,
sion. 0C and +40C (+32F and +104F). time, run the battery out before Rechargeable Ni-MH (nickel-metal
Refer to the Owners Manual for the storing it. hydride) or AA lithium batteries
1 Camera uses the Rechargeable time of charging battery. If you do not intend to use the
Lithium-ion Battery You should charge the battery camera for a long period of time, * For details on the batteries that
at an ambient temperature be- remove the battery from the cam- you can use, refer to the Owners
* When shipped, the battery is not
tween +10C and +35C (+50F and era. Manual of your camera.
fully charged. Always charge the
battery before using it. +95F). If you charge the battery at Store the battery in a cool place. Cautions for Using Battery
* When carrying the battery, install it a temperature outside this range, - The battery should be stored in Do not heat the batteries or throw
in a digitalcamera or keep it in the charging takes longer because the a dry location with an ambient them into a fire.
soft case. performance of the battery is im- temperature between +15C and Do not carry or store batteries with
paired. +25C (+59F and +77F). metal objects such as necklaces or
Battery Features
You cannot charge the battery at - Do not leave the battery in hot or hairpins.
The battery gradually loses its
temperatures of 0C (+32F) or be- extremely cold places. Do not expose the batteries to wa-
charge even when not used. Use
low. ter, and keep batteries from getting
a battery that has been charged Handling the Battery
The Rechargeable Lithium-ion Bat- Cautions for Your Safety: wet or stored in moist locations.
recently (in the last day or two) to
tery does not need to be fully dis- Do not carry or store battery with Do not attempt to take apart or
take pictures.
charged or exhausted flat before metal objects such as necklaces or change the batteries, including
To maximize the life of the battery,
being charged. hairpins. battery casings.
turn the camera off as quickly as
The battery may feel warm after it Do not heat the battery or throw it Do not subject the batteries to
possible when it is not being used.
has been charged or immediately into a fire. strong impacts.
The number of available frames will
after being used. This is perfectly Do not attempt to take apart or Do not use batteries that are leak-
be lower in cold locations or at low
normal. change the battery. ing, deformed, discolored.
temperatures. Take along a spare
Do not recharge a fully charged Do not recharge the battery with Do not store batteries in warm or
fully charged battery. You can also
battery. chargers other those specified. humid places.
increase the amount of power pro-
Dispose of used battery promptly. Keep the batteries out of reach of
duced by putting the battery in Battery Life
Do not drop the battery or other- babies and small children.
your pocket or another warm place At normal temperatures, the bat-
wise subject it to strong impacts. Make sure that the battery polarity
to heat it and then loading it into tery can be used at least 300 times.
Do not expose the battery to wa- (C and D) is correct.
the camera just before you take a If the time for which the battery
picture. provides power shortens markedly, ter.
vii
For Your Safety
viii
For Your Safety
Do not take apart the AC power unless intended only for personal Although the LCD panel is produced Notes on Electrical Interference
adapter. Doing so could be dan- use. Note that some restrictions ap- with highly sophisticated technolo- If the camera is to be used in hos-
gerous. ply to the photographing of stage gies, there may be black spots or pitals or aircrafts, please note that
Do not use the AC power adapter performances, entertainments and permanently lit spots. This is not a this camera may cause interference
in a hot and humid place. exhibits, even when intended purely malfunction, and does not affect re- to other equipment in the hospital
Do not subject the AC power for personal use. Users are also asked corded images. or aircraft. For details, please check
adapter to strong shocks. to note that the transfer of Memory with the applicable regulations.
Trademark Information
The AC power adapter may emit a Card containing images or data pro-
xD-Picture Card and E are trade- Explanation of Color Television
humming. This is normal. tected under copyright laws is only System
marks of FUJIFILM Corporation. The
If used near a radio, the AC power permissible within the restrictions NTSC: National Television System
typefaces included herein are solely
adapter may cause static. If this imposed by those copyright laws. Committee, color television
developed by DynaComware Tai-
happens, move the camera away telecasting specifications
Handling Your Digital Camera wan Inc. Macintosh, QuickTime, and
from the radio. adopted mainly in the U.S.A.,
To ensure that images are recorded Mac OS are trademarks of Apple Inc.
correctly, do not subject the camera in the U.S.A. and other countries. Canada and Japan.
Before Using the Camera
to impact or shock while an image is Windows 8, Windows 7, Windows
Do not aim the camera at extremely PAL: Phase Alternation by Line, a
being recorded. Vista, and the Windows logo are
bright light sources, such as the sun color television system ad-
trademarks of the Microsoft group of
in a cloudless sky. Failure to observe Liquid Crystal opted mainly by European
companies. Wi-Fi and Wi-Fi Protect-
this precaution could damage the If the LCD monitor is damaged, take countries and China.
ed Setup are registered trademarks
camera image sensor. particular care with the liquid crystal
of the Wi-Fi Alliance. Adobe and Exif Print (Exif ver. 2.3)
in the monitor. If any of the follow-
Test Shots Prior to Photography Adobe Reader are either trademarks Exif Print Format is a newly revised
ing situations arise, take the urgent
For important photographs (such as or registered trademarks of Adobe digital camera file format that con-
action indicated.
weddings and overseas trips), always Systems Incorporated in the U.S.A. tains a variety of shooting informa-
If liquid crystal comes in contact
take a test shot and view the im- and/or other countries. The SDHC tion for optimal printing.
with your skin:
age to make sure that the camera is and SDXC logos are trademarks of
Wipe the area with a cloth and
working normally. SD-3C, LLC. The HDMI logo is a trade- IMPORTANT NOTICE: Read Before
then wash thoroughly with soap
FUJIFILM Corporation cannot ac-
and running water.
mark. YouTube is a trademark of Using the Software
cept liability for any incidental Google Inc. Facebook is a trademark Direct or indirect export, in whole or
If liquid crystal gets into your eye:
losses (such as the costs of photog- of Facebook, Inc. All other trade in part, of licensed software without
Flush the affected eye with clean
raphy or the loss of income from names mentioned in this manual are the permission of the applicable
water for at least 15 minutes and
photography) incurred as a result the trademarks or registered trade- governing bodies is prohibited.
then seek medical assistance.
of faults with this product. marks of their respective owners.
If liquid crystal is swallowed:
Notes on Copyright Flush your mouth thoroughly with
Images recorded using your digital water. Drink large quantities of wa-
camera system cannot be used in ter and induce vomiting. Then seek
ways that infringe copyright laws medical assistance.
without the consent of the owner,
ix
For Your Safety
QQ This product, which contains encryption function de- Do not use the device in locations subject to magnetic fields, 2.4DS/OF4 This sticker indicates that
veloped in the United States, is controlled by the United static electricity, or radio interference. Do not use the trans- this device operates in
States Export Administration Regulations and may not mitter in the vicinity of microwave ovens or in other loca- the 2.4 GHz band using
be exported or re-exported to any country to which the tions subject to magnetic fields, static electricity, or radio DSSS and OFDM modula-
United States embargoes goods. interference that may prevent reception of wireless signals. tion and may cause inter-
Use only as part of a wireless network. FUJIFILM does not Mutual interference may occur when the transmitter is ference at distances of up
accept liability for damages resulting from unauthorized used in the vicinity of other wireless devices operating in to 40m.
use. Do not use in applications requiring a high degree of the 2.4GHz band.
reliability, for example in medical devices or other systems The wireless transmitter operates in the 2.4 GHz band using
that may directly or indirectly impact human life. When DSSS and OFDM modulation.
using the device in computer and other systems that de- Wireless Network Devices: Cautions
mand a greater degree of reliability than wireless networks,
This device operates on the same frequency as commercial,
be sure to take all necessary precautions to ensure safety
educational, and medical devices and wireless transmitters. It
and prevent malfunction.
also operates on the same frequency as licensed transmit-
Use only in the country in which the device was purchased.
ters and special unlicensed low-voltage transmitters used
This device conforms to regulations governing wireless
in RFID tracking systems for assembly lines and in other
network devices in the country in which it was purchased.
similar applications.
Observe all location regulations when using the device.
To prevent interference with the above devices, observe the
FUJIFILM does not accept liability for problems arising from
following precautions. Confirm that the RFID transmitter
use in other jurisdictions.
is not in operation before using this device. Should you
Wireless data (images) may be intercepted by third parties. The
observe that the device causes interference in licensed
security of data transmitted over wireless networks is not
transmitters used for RFID tracking, immediately choose
guaranteed.
a new operating frequency for this device to prevent ad-
ditional interference. If you notice that this device causes
interference in low-voltage RFID tracing systems, contact a
FUJIFILM representative.
x
About This Manual
Before using the camera, read this manual and the warnings on pages ii-x. For information on specific
topics, consult the sources below.
Table of Contents.............................................. Pxii Troubleshooting..............................................P114
The Table of Contents gives an overview of the Having a specific problem with the camera? Find
entire manual. The principal camera operations the answer here.
are listed here.
Warning Messages and Displays...................... P122
Find out whats behind that flashing icon or error
message in the display.
Memory Cards
Pictures can be stored in an optional SD, SDHC, and SDXC memory cards (P11), referred to in this manual as
memory cards.
Temperature Warning
The camera will turn off automatically before its temperature or the temperature of the battery rise above safe
limits. Pictures taken when a temperature warning is displayed may exhibit higher levels of noise (mottling).
Turn the camera off and wait for it to cool before turning it on again.
xi
Table of Contents
For Your Safety.................................................................................. ii Basic Photography and Playback
IMPORTANT SAFETY INSTRUCTIONS....................................... ii Taking Pictures in M (Scene Recognition) Mode....18
Safety Notes..................................................................................... iv Viewing Pictures.............................................................................23
About This Manual.......................................................................... xi
More on Photography
Before You Begin Shooting Mode................................................................................24
Introduction........................................................................................ 1 The Mode Dial.............................................................................24
Symbols and Conventions........................................................... 1 M SCENE RECOGNITION..................................................25
Supplied Accessories..................................................................... 1 B AUTO...........................................................................................25
Parts of the Camera........................................................................ 2 Adv. ADVANCED............................................................................25
Camera Displays........................................................................... 4 SP SCENE POSITION.....................................................................29
The monitor.................................................................................... 6 r MOTION PANORAMA 360..................................................30
P: PROGRAM AE.............................................................................32
First Steps
S: SHUTTER PRIORITY AE............................................................33
Attaching Accessories.................................................................... 8 A: APERTURE PRIORITY AE.........................................................33
The Strap......................................................................................... 8 M: MANUAL.....................................................................................34
The Lens Cap.................................................................................. 8 C: CUSTOM MODE.........................................................................35
The Lens Hood (Optional Accessory)................................... 8 Intelligent Face Detection..........................................................36
Inserting the Battery....................................................................... 9 Focus Lock.........................................................................................38
Inserting a Memory Card............................................................ 11 F Macro and Super Macro Modes (Close-ups).................40
Charging the Battery....................................................................14 N Using the Flash (Intelligent Flash)......................................41
Turning the Camera On and Off...............................................16 J Using the Self-Timer................................................................43
Shooting Mode..............................................................................16 Interval shooting...........................................................................44
Playback Mode...............................................................................16 The Fn Button...................................................................................45
Basic Setup........................................................................................ 17 I Continuous Shooting (Burst Mode).................................46
d Exposure Compensation......................................................49
D WHITE BALANCE.......................................................................51
Focus Mode.......................................................................................52
Focus Frame Selection.................................................................54
xii
Table of Contents
xiv
Introduction
Symbols and Conventions
The following symbols are used in this manual:
3: This information should be read before use to ensure correct operation.
Supplied Accessories
The following items are included with the camera:
Basic Manual
Hot shoe cover
(to protect the ports,
attached to camera)
Strap Lens cap CD-ROM
* Shape of adapter varies with region of sale.
1
Introduction
2
Introduction
3
Introduction
Camera Displays
The following indicators may appear during shooting and playback. The indicators displayed vary with
camera settings.
Shooting
1 Number of available frames............ 126 15 Blur warning..............................41, 117, 122
19 2 Movie mode.................................................66 16 IS mode...........................................................20
DATE 100 3 Internal memory indicator * 17 Date and time..............................................17
N 4 Focus warning............................................21 18 Shutter speed and aperture..............32
5 Date stamp.................................................108 19 Sensitivity.......................................................83
6 Silent mode............................................... 101 20 Image size/quality............................83, 84
7 Burst mode...................................................46 21 Temperature warning..............................xi
8/24/2014 10:58 AM
8 Metering.........................................................85 22 FinePix color.................................................85
1000 F7.1
9 Intelligent Face Detection 23 White balance.............................................51
indicator..........................................................36 24 Battery level..................................................19
10 Shooting mode..........................................24 25 Location data download status.......63
* a : indicates that no memory card 11 Flash mode...................................................41 26 Exposure indicator...................................49
is inserted and that pictures will 12 Macro (close-ups) mode......................40 27 Exposure compensation
be stored in the cameras internal 13 Self-timer indicator..................................43 indicator..........................................................49
memory. 14 Focus frame..................................................38
Playback
1 Gift Image......................................................55 8 Protected image........................................95
2 Silent mode............................................... 101 9 DPOF print indicator...............................72
100-0001 3 Advanced Filter..........................................26 10 Photobook assist indicator.................59
100
4:3 N
4 Red-eye removal indicator.................94 11 Mark for upload to....................................91
5 Pro low-light mode..................................27 12 Frame number.........................................106
6 Intelligent Face Detection 13 Location data...............................................63
indicator..........................................................36 14 Rating................................................................56
6/25/2014 10:00 AM
1/1000 F2.8 12 3
7 Playback mode indicator.............23, 55
4
Introduction
Histograms
100-0001 Histograms show the distribution of tones in the im-
4:3 N
ISO 400 age. Brightness is shown by the horizontal axis, the
1/250
: STD
F3.5
number of pixels by the vertical axis.
: OFF
No. of
pixels
:
: -1 2 3
12/31/2050 10 : 00 AM
Pixel brightness
qImage quality and size, wSensitivity, eShut-
ter speed/aperture, rFinePix color, tFlash mode, Shadows Highlights
yWhite balance, uExposure compensation, iFrame Optimal exposure: Pixels are
number, oPicture (overexposed areas blink on and off), distributed in an even curve
!0Histogram throughout the tone range.
Overexposed: Pixels are clustered
Overexposed areas blink on and at the right side of the graph.
off.
Underexposed: Pixels are clustered
at the left side of the graph.
5
Introduction
The monitor
The monitor can be rotated and angled to suit your needs, such as self-portraits, low-angle shots, or
high-angle shots.
1
For normal use, fold the monitor facing out.
When carrying the camera, fold the monitor facing inward to prevent dirt and scratches.
Rotating the monitor
Rotate the monitor gently. Do not apply excessive force. Failure to observe these precautions may damage the
connection between the monitor and the camera body. Note that when a cable is connected to the camera,
the cable may be caught.
Reverse Display
When cREVERSE DISPLAY is set to ON from the shooting menu, the image is flipped horizontally and dis-
played on the LCD monitor. This allows you to take self portraits while looking in a mirror.
6
Introduction
used when bright lighting conditions make the display in the monitor difficult to see.
3
Strong sunlight focused through the viewfinder may damage the panel of electronic viewfinder (EVF). Do not
aim the electronic viewfinder at the sun.
7
Attaching Accessories
The Strap To avoid losing the lens cap, pass the supplied string
Attach the strap to the two strap eyelets as shown through the eyelet (q) and secure the lens cap to the
below. strap (w).
First Steps
8
Inserting the Battery
Insert the batteries in the camera as described
below.
2 Insert the battery.
Insert the battery as shown in the illustration
inside the battery chamber, using the bat-
1 Slide
Open the battery-chamber cover.
the battery-cham-
tery to keep the latch pressed to one side.
ber latch in the direction Arrow
First Steps
shown and open the bat-
tery-chamber cover.
a
Be sure the camera is off before opening the bat-
tery-chamber cover.
c Battery latch
Do not open the battery-chamber cover when c
the camera is on. Failure to observe this pre- Insert the battery in the correct orientation. Do
caution could result in damage to image files or not use force or attempt to insert the battery up-
memory cards. side down or backwards. The battery will slide in
Do not use excessive force when handling the easily in the correct orientation.
battery-chamber cover.
9
Inserting the Battery
3 Press
Close the battery-chamber cover.
the cover down un-
c Batteries
Remove dirt from the battery terminals with a clean,
til it clicks into place. dry cloth. Failure to observe this precaution could
prevent the battery from charging.
Do not affix stickers or other objects to the battery.
Failure to observe this precaution could make it im-
possible to remove the battery from the camera.
Do not short the battery terminals. The battery could
Removing the Battery overheat.
Before removing the battery, Read the cautions in Power Supply and Battery
turn the camera off and open (Pvii).
the battery-chamber cover. To Use only battery chargers designated for use with the
remove the battery, press the battery. Failure to observe this precaution could re-
battery latch to the side, and sult in product malfunction.
slide the battery out of the cam- Do not remove the labels from the battery or attempt
era as shown. Battery latch to split or peel the outer casing.
The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.
10
Inserting a Memory Card
Although the camera can store pictures in inter- c
nal memory, optional SD, SDHC and SDXC mem- Be sure card is in the correct orientation; do not
ory cards (sold separately) can be used to store insert at an angle or use force. If the memory
additional pictures. card is not correctly inserted or no memory
card is inserted, a will appear in the LCD moni-
1 Slide
Open the battery-chamber cover. tor and internal memory will be used for record-
First Steps
the battery-cham- ing and playback.
ber latch in the direction SD/SDHC/SDXC memory
shown and open the bat- cards can be locked, mak-
tery-chamber cover. ing it impossible to format
the card or to record or Write-protect
delete images. Before in- switch
serting an SD/SDHC/SDXC
2 Insert the memory card.
Holding the memory card in the orientation
memory card, slide the
write-protect switch to the
shown below, slide it in until it clicks into unlocked position.
place at the back of the slot.
11
Inserting a Memory Card
3 Press
Close the battery-chamber cover.
the cover down un-
Removing Memory Cards
After confirming that the cam-
til it clicks into place. era is off, press the card in and
then release it slowly. The card
can now be removed by hand.
c
The memory card may spring out if you remove
your finger immediately after pushing the card in.
Memory cards may be warm to the touch after be-
ing removed from the camera. This is normal and
does not indicate a malfunction.
12
Inserting a Memory Card
Compatible Memory Cards miniSD or microSD adapters that are larger or smaller
FUJIFILM and SanDisk SD, SDHC, and SDXC mem- than the standard dimensions of an SD/SDHC/SDXC
ory cards have been approved for use in the cam- card may not eject normally; if the card does not
eject, take the camera to an authorized service repre-
era. A complete list of approved memory cards
sentative. Do not forcibly remove the card.
is available at http://www.fujifilm.com/support/ Do not affix labels to memory cards. Peeling labels
First Steps
digital_cameras/compatibility/. Operation is not can cause camera malfunction.
guaranteed with other cards. The camera can not Use a H card or better when shooting full HD
be used with xD-Picture Cards or MultiMediaCard movies.
(MMC) devices. Movie recording may be interrupted with some types
of SD/SDHC/SDXC memory card. Use a H card
c Memory Cards
or better when shooting HD or high-speed movies.
Do not turn the camera off or remove the memory
The data in internal memory may be erased or cor-
card while the memory card is being formatted or
rupted when the camera is repaired. Please note that
data are being recorded to or deleted from the card.
the repairer will be able to view pictures in internal
Failure to observe this precaution could damage the
memory.
card.
Formatting a memory card or internal memory in the
Format SD/SDHC/SDXC memory cards before first
camera creates a folder in which pictures are stored.
use, and be sure to reformat all memory cards af-
Do not rename or delete this folder or use a comput-
ter using them in a computer or other device. For
er or other device to edit, delete, or rename image
more information on formatting memory cards, see
files. Always use the camera to delete pictures from
KFORMAT (P105).
memory cards and internal memory; before editing
Memory cards are small and can be swallowed; keep
or renaming files, copy them to a computer and edit
out of reach of children. If a child swallows a memory
or rename the copies, not the originals.
card, seek medical assistance immediately.
13
Charging the Battery
The battery is not charged at shipment. Charge the battery before use. The camera charges the bat-
tery internally.
3
When a USB cable is connected to charge the camera, you cannot shoot photos or movies.
14
Charging the Battery
Charge status
The indicator lamp shows battery charge status.
Indicator lamp Battery status Action
On Battery charging.
Off Charging complete.
First Steps
Blinks Battery fault. See page 114
c
If the computer goes into sleep mode while charging, charging will stop. To continue charging, disable sleep
mode on the computer, and disconnect and connect the USB cable.
Charging may be impossible depending on computer specifications, settings or conditions.
15
Turning the Camera On and Off
Shooting Mode Playback Mode
Press the G button to turn the camera on. To turn the camera on and begin playback, press
The lens will extend automatically. the a button for about a second.
ENGLISH
FRANCAIS
First Steps
DEUTSCH
ESPAOL
PORTUGUS
SET NO 1.2 Press MENU/OK.
2016
2015
hour, or minute and press up or down to change. To change
YY. MM. DD 2014
2013
1. 1 12 : 00
AM
the order in which the year, month, and day are displayed, high-
2012
light the date format and press the selector up or down.
SET NO
17
Taking Pictures in M (Scene Recognition) Mode
This section describes how to take pictures in M mode.
18
Taking Pictures in M (Scene Recognition) Mode
1
A battery warning may not be displayed before
the camera turns off, particularly if batteries are
reused after having once been exhausted. Power
consumption varies greatly from mode to mode;
the low battery warning (B) may not be dis-
played or may be displayed only briefly before
the camera turns off in some modes or when
switching from shooting to playback mode.
19
Taking Pictures in M (Scene Recognition) Mode
20
Taking Pictures in M (Scene Recognition) Mode
5 Focus.
Press the shutter button halfway
6 Shoot.
Smoothly press the shutter button
to focus. the rest of the way down to take
the picture.
1 2 The Shutter Button
The lens may make a noise when the camera fo- The shutter button has two positions. Pressing the
cuses; this is normal. In M mode, the cam- shutter button halfway (q) sets focus and exposure;
1
If the subject is poorly lit, the AF-assist illuminator may
light to assist focus (P39). For information on using
the flash when lighting is poor, see page 41.
21
Taking Pictures in M (Scene Recognition) Mode
Indicator lamp
22
Viewing Pictures
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and
check the results.
OK. FRAME
The most recent picture will be displayed in SELECTED FRAMES
ALL FRAMES
the monitor.
SET BACK
100-0001
MENU/OK.
YES CANCEL
23
Shooting Mode
Choose a shooting mode according to the scene or type of subject.
24
Shooting Mode
More on Photography
AAdv. MODE P
aADVANCED FILTER 26
jPRO LOW-LIGHT 27
kHDR 27
CNatural & N 28
BZoom Bracketing 28
25
Shooting Mode
n a ADVANCED FILTER
Take photos with filter effects. Select a filter effect and press MENU/OK.
1
Depending on the subject and camera settings, images may in some cases be grainy or vary in brightness and
hue.
Filter Description
G TOY CAMERA*1 Choose for a retro toy camera effect.
H MINIATURE*2 The tops and bottoms of pictures are blurred for a diorama effect.
I POP COLOR*1 Create high-contrast images with saturated colors.
J HIGH-KEY*1 Create bright, low-contrast images.
Z LOW-KEY*1 Create uniformly dark tones with few areas of emphasized highlights.
K DYNAMIC TONE*1 Dynamic tone expression is used for a fantasy effect.
d FISH-EYE*1*3 Create a distorting effect of a fisheye lens.
S SOFT FOCUS*1 Create a look that is evenly soft throughout the whole image.
C CROSS SCREEN*2 Create a star pattern where lines radiate out from bright objects.
u PARTIAL COLOR (RED)*1
v PARTIAL COLOR (ORANGE)*1
w PARTIAL COLOR (YELLOW)*1 Areas of the image that are the selected color are recorded in that color. All others areas of the
x PARTIAL COLOR (GREEN)*1 image are recorded in black-and-white.
y PARTIAL COLOR (BLUE)*1
z PARTIAL COLOR (PURPLE)*1
*1 You can also shoot movies.
*2 Check the effect on the images after shooting.
*3 You cannot shoot movies with i19201080. WMOVIE MODE is automatically changed to h1280720 if i19201080 is
selected.
26
Shooting Mode
More on Photography
with some scenes or if the subject or camera moves ing is complete.
during shooting. Do not move the camera until shoot-
3
ing is complete.
Keep the camera steady during shooting.
c Frame coverage is reduced.
Keep the camera steady during shooting.
Frame coverage is reduced.
27
Shooting Mode
1
Digital zoom can not be used. If digital zoom is active
when B mode is selected, zoom will be set to the
maximum optical zoom position.
Burst shooting options can not be used.
28
Shooting Mode
SP SCENE POSITION
The camera offers a choice of scenes, each adapted to particular shooting conditions or a specific
type of subject. Use the ASCENE POSITION option in the shooting menu to choose the scene as-
signed to the SP position on the mode dial.
More on Photography
Scene Description
C PORTRAIT Choose this mode for soft-toned portraits with natural skin tones.
M LANDSCAPE Choose this mode for crisp, clear daylight shots of buildings and landscapes.
N SPORT Choose this mode when photographing moving subjects. Priority is given to faster shutter speeds.
Choose this mode for poorly lit twilight or night scenes. Sensitivity is automatically raised to reduce
O NIGHT
blur caused by camera shake.
H NIGHT (TRIPOD) Choose this mode for slow shutter speeds when shooting at night. Use a tripod to prevent blur.
Slow shutter speeds are used to capture the expanding burst of light from a firework. Choose a shut-
P FIREWORKS
ter speed with the command dial.
Q SUNSET Choose this mode to record the vivid colors in sunrises and sunsets.
R SNOW Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white snow.
S BEACH Choose for crisp, clear shots that capture the brightness of sunlit beaches.
U PARTY Capture indoor background lighting under low-light conditions.
V FLOWER Choose for vivid close-ups of flowers. The camera focuses in the macro range.
W TEXT Take clear pictures of text or drawings in print. The camera focuses in the macro range.
29
Shooting Mode
30
Shooting Mode
More on Photography
ing subjects, subjects close to the camera, unvarying
subjects such as the sky or a field of grass, subjects
that are in constant motion, such as waves and wa-
terfalls, or subjects that undergo marked changes in
brightness. Panoramas may be blurred if the subject
is poorly lit.
31
Shooting Mode
Shutter speed
1000
1200 F3.3 Aperture
c
If the subject is outside the metering range of the cam-
era, the shutter speed and aperture displays will show
---. Press the shutter button halfway to measure ex-
posure again.
32
Shooting Mode
More on Photography
S
Shutter speed
1200
Aperture
F10
c
If the correct exposure can not be achieved at the c
selected shutter speed, aperture will be displayed in If the correct exposure can not be achieved at the se-
red. Adjust shutter speed until the correct exposure lected aperture, shutter speed will be displayed in red.
is achieved. If the subject is outside the metering Adjust aperture until the correct exposure is achieved.
range of the camera, the aperture display will show If the subject is outside the metering range of the cam-
F---. Press the shutter button halfway to measure era, the shutter speed display will show ---. Press the
exposure again. shutter button halfway to measure exposure again.
The shutter speed is restricted depending on the ISO
setting.
33
Shooting Mode
M: MANUAL c
Noise in the form of randomly-spaced bright pixels
In this mode, you choose both shutter speed and may occur in long exposures.
aperture. If desired, exposure can be altered from The shutter speed is restricted depending on the ISO
the value suggested by the camera. setting.
Shutter speed
1200 F7. 1
Aperture
34
Shooting Mode
C: CUSTOM MODE
In P, S, A and M modes, the KCUSTOM SET option in the shooting
menu (P82) can be used to save current camera and menu settings.
These settings are recalled whenever the mode dial is rotated to C (cus-
tom mode).
More on Photography
AIMAGE DISP, LIS MODE, WSIDE ZOOM LEVER, CAF ILLUMINATOR, RINTELLIGENT DIGITAL
Setup menu
ZOOM
Shooting mode (P, S, A, or M), continuous shooting mode, macro mode, exposure compensation, flash mode,
Other
shutter speed, aperture, indicators/best framing
35
Intelligent Face Detection
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and
exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for
group portraits (in horizontal or vertical orientations) to prevent the camera from focusing on the back-
ground.
36
Intelligent Face Detection
More on Photography
(P105), and cropping (P96).
37
Focus Lock
To compose photographs with off-center subjects:
2 Focus.
Press the shutter button halfway to set fo-
cus and exposure. Focus and exposure will
remain locked while the shutter button is
4 Shoot.
Press the shutter-release button the rest of
pressed halfway (AF/AE lock). the way down to take the picture.
38
Focus Lock
More on Photography
the distance to the subject.
39
F Macro and Super Macro Modes (Close-ups)
For close-ups, press the selector left (F) to choose from the macro options shown below.
Choose from F(macro mode),
G(super macro mode), or
OFF(macro mode off)
When macro mode is in effect, the camera focuses on subjects near the center of the frame. Use the
zoom control to compose pictures. In super macro mode, optical zoom can not be adjusted and the
flash can not be used.
1
Use of a tripod is recommended to prevent blur caused by camera shake.
Flash compensation may be required when using the flash (P86).
Using the flash at close range may cast a lens shadow. Zoom a little or have more distance from the subject.
40
N Using the Flash (Intelligent Flash)
When the flash is used, the cameras Intelligent Flash system instantly analyzes the scene based on
such factors as the brightness of the subject, its position in the frame, and its distance from the camera.
Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed while
preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the flash
when lighting is poor, for example when shooting at night or indoors under low light.
More on Photography
may be blurred; use of a tripod is recommended.
Mode Description
A/K
The flash fires when required. Recommended in most situations.
(AUTO FLASH)
N/L The flash fires whenever a picture is taken. Use for backlit subjects or for natural
(FORCED FLASH) coloration when shooting in bright light.
O/M Capture both the main subject and the background under low light (note that
(SLOW SYNCHRO) brightly lit scenes may be overexposed).
41
N Using the Flash (Intelligent Flash)
3 Focus.
Press the shutter button halfway to focus. If the flash will fire, p will be displayed when
the shutter button is pressed halfway. At slow shutter speeds, k will appear in the
display to warn that pictures may be blurred; use of a tripod is recommended.
4 Shoot.
Press the shutter button the rest of the way down to shoot.
3
The flash may fire several times with each shot. Do not move the camera until shooting is com-
plete.
1
The peripheral part of an image may be dark when using the flash.
Red-Eye Removal
When Intelligent Face Detection is active (P36), and ON is selected for BRED EYE REMOVAL in
the setup menu (P102), red-eye removal is available when face detection is performed in K, L,
and M.
Red-eye removal minimizes red-eye caused when light from the flash is reflected from the subjects
retinas as shown in the illustration at right.
42
J Using the Self-Timer
To use the self-timer, press the selector down (h) and choose from the following options:
OFF
OFF
Option Description
T (OFF) Self-timer off.
The shutter is released ten seconds after the shutter button is pressed. Use for self-portraits.
S (10 SEC) The self-timer lamp on the front of the camera lights when the timer starts and begins to
More on Photography
blink shortly before the photo is taken.
The shutter is released two seconds after the shutter button is pressed. Use to reduce blur
R (2 SEC) caused by the camera moving when the shutter button is pressed. The self-timer lamp will
blink as the timer counts down.
e (INTERVAL
Shoots photos automatically at fixed intervals.
SHOOTING)
Interval shooting 1
If you press the shutter button before shooting ends,
You can automatically shoot at fixed intervals. interval shooting stops.
The LCD monitor turns off and the indicator lamp
1. Press J (F), and then select
eINTERVAL SHOOTING.
flashes during interval shooting. The LCD monitor
turns on three seconds before shooting starts.
More on Photography
45
I Continuous Shooting (Burst Mode)
Capture motion or automatically vary selected settings over a series of pictures.
Press the I button and choose c
from the following options: Focus and exposure are determined by the first frame
in each series. The flash turns off automatically; the
OFF: OFF previously-selected flash mode is restored when con-
J: J CONTINUOUS tinuous shooting is turned off.
K: K CONTINUOUS Frame rate varies with shutter speed, shooting condi-
O: O CONTINUOUS tions, and the number of pictures in each burst.
P: BEST FRAME CAPTURE The number of pictures that can be taken in a single
O: AE BKT burst varies with the scene and camera settings. The
number of pictures that can be recorded depends on
the memory available.
46
I Continuous Shooting (Burst Mode)
before and ending after the shutter button is tor right. Press the selector SHUTTER
pressed. To choose the frame rate and number up or down to choose the 9 FRAMES
18
More on Photography
selector up or down to choose a shutter button is pressed).
new value and press MENU/OK to se- Press MENU/OK when set-
lect. tings are complete.
c
4 Press
mode.
DISP/BACK to return to shooting
47
I Continuous Shooting (Burst Mode)
Before After
shots shots
c
If the shutter button is pressed all the way down be-
fore the number of frames selected for the before
portion is recorded, the remaining frames will be
taken after the shutter button is pressed all the way
down.
If the shutter button is pressed halfway for an extend-
ed period, the camera may record the burst before
the shutter button is pressed all the way down.
48
d Exposure Compensation
Use exposure compensation when photographing very bright, very dark, or high-contrast subjects.
Exposure indicator
4 Take pictures.
1000
1200 F3.3 1
A d icon and exposure indicator are displayed at set-
2 Choose a value. tings other than 0. Exposure compensation is not
More on Photography
Rotate the command dial. The ef- reset when the camera is turned off; to restore normal
fect is visible in the display. exposure control, choose a value of 0.
49
d Exposure Compensation
50
D WHITE BALANCE
For natural colors, select DWHITE BALANCE in the shooting menu and choose a setting that match-
es the light source.
Option Description h: Custom White Balance
AUTO White balance adjusted automatically. Choose h to adjust white balance for unusual
h Measure a value for white balance. lighting conditions. White balance measurement
i For subjects in direct sunlight. options will be displayed; frame a white object so
j For subjects in the shade. that it fills the monitor and press the shutter but-
k Use under daylight fluorescent lights. ton all the way down to measure white balance.
l Use under warm white fluorescent lights.
m Use under cool white fluorescent lights. If COMPLETED! is displayed, press MENU/OK to set
white balance to the measured value. This value
More on Photography
n Use under incandescent lighting.
can be reselected by pressing MENU/OK when cus-
If AUTO does not produce the desired results (for tom white balance options are displayed.
example, when taking close-ups), select h and
measure a value for white balance or choose the If UNDER is displayed, raise exposure compensa-
option that matches the light source. tion (P49) and try again.
1 If OVER is displayed, lower exposure compensa-
At settings other than h, auto white balance is used tion and try again.
with the flash. Lower the flash (P41) to take pictures
2
at other settings.
To give a deliberate color cast to your photographs,
Results vary with shooting conditions. Play pictures
measure a value for custom white balance using a col-
back after shooting to check colors in the monitor.
ored instead of a white object.
51
Focus Mode
Use F FOCUS MODE from the shooting menu to change how the camera focuses.
rCENTER The camera focuses on the subject in the center of the frame.
When the shutter button is pressed halfway, the camera detects high-contrast subjects near
sMULTI
the center of the frame and selects the focus area automatically.
tAREA Choose the focus area manually (P54).
52
Focus Mode
The camera continually adjusts focus to reflect changes in the distance to the subject even
uCONTINUOUS when the shutter button is not pressed halfway (note that this increases the drain on the
batteries). Choose for moving subjects.
Position the subject in the center focus area and press the selector left. Focus will track the
xTRACKING
subject as it moves through the frame.
1 M (MANUAL FOCUS)
Use of a tripod is recommended. Focus may be affected if the camera moves.
The camera will not focus when the focus ring is rotated all the way to the right. To focus at infinity, focus on a
distant object.
Focus check
More on Photography
If ON is selected for jFOCUS CHECK in the setup menu (P102), rotating the command dial magnifies the
view.
The outlines with the most contrast at the current focus distance can be viewed by selecting FOCUS PEAK
HIGHLIGHT for cMF ASSIST (P81). To switch between FOCUS PEAK HIGHLIGHT and STANDARD, select
cMF ASSIST from the shooting menu.
53
Focus Frame Selection
When tAREA is selected for FFOCUS MODE in the shooting menu, the camera offers a choice of
focus points. To position the focus frame, press the selector up, down, left, or right. Press MENU/OK to
put the setting into effect.
SELECT AF AREA
SET Focus
CANCELtarget
c
Disable intelligent face detection (P 37) when using manual focus frame selection.
54
Playback Options
To view the most recent picture in the monitor, Playback Zoom
press the a button. Select T to zoom in on pictures displayed in sin-
100-0001 gle-frame playback; select W to zoom out. When
the picture is zoomed in, the selector can be used
to view areas of the image not currently visible in
the display.
Zoom indicator
Press the selector right to view pictures
Navigation window
in the order recorded, left to view pic-
shows portion of image
tures in reverse order. Keep the selector currently displayed in
pressed to scroll rapidly to the desired monitor
frame.
Press DISP/BACK to exit zoom.
More on Playback
1
Pictures taken using other cameras are indicated by a 1
m (gift image) icon during playback. The maximum zoom ratio varies with image size.
Playback zoom is not available with copies resized or
Continuous Shooting cropped to a size of a or smaller.
In the case of pictures taken in continuous shoot-
ing mode, only the first frame of each series will
be displayed. Press the selector down to view the
other pictures in the series.
1
Pictures taken in continuous shooting mode have file
names that start with S.
(e.g. S0010001.JPG)
55
Playback Options
56
Playback Options
Multi-Frame Playback
To change the number of images dis- Use the selector to highlight images and press
played during playback, select W. MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press
the selector up or down to view more pictures.
2 Two-Frame Display
2050. 12. 31 10 : 00 AM
Two-frame display can be used
to compare pictures taken in
C mode.
More on Playback
increase the the number of im-
number of pictures ages displayed.
displayed to, two,
nine, or a hundred.
57
Viewing Panoramas
If you press the selector down when a panorama is displayed full frame, the camera will play back the
picture from left to right or from bottom to top.
PLAY
STOP PAUSE
58
k PhotoBook Assist
Create books from your favorite photos.
Creating a PhotoBook
Select kPHOTOBOOK ASSIST in the play- 5 Scroll through the images and press the selec-
1 back menu. tor up to select or deselect the current image
for inclusion in the book. To display the current
2 Highlight NEW BOOK. image on the cover, press the selector down.
1
The first picture selected automatically becomes
3 Press MENU/OK to display the new
book dialog.
the cover image. Press the selector down to select
a different picture for the cover.
More on Playback
SELECT FROM ALL: Choose from all the is complete.
pictures available.
SELECT BY IMAGE SEARCH: Choose from pictures 7 Highlight COMPLETE PHOTOBOOK.
matching selected search conditions (P61). SELECT IMAGES FOR PHOTOBOOK
SELECT ALL
1 COMPLETE PHOTOBOOK
1
Choose SELECT ALL to select all photos, or all pho-
tos matching the specified search conditions, for
the book.
59
k PhotoBook Assist
8 added
Press MENU/OK. The new book will be
to the list in the photobook
Viewing PhotoBooks
Highlight a book in the photobook assist menu
assist menu. and press MENU/OK to display the book, then press
3 the selector left and right to scroll through the
Photobooks can contain up to 300 pictures. pictures. Press DISP/BACK to return to the photo-
Books that contain no photos are automatically book assist menu.
deleted.
PhotoBooks Editing and Deleting PhotoBooks
Photobooks can be copied to a computer using the
supplied MyFinePix Studio software.
1 Display the photobook and press
MENU/OK to view book edit options.
60
bImage Search
Search for pictures by date, subject, scene, file type, and rating.
1 Select
menu.
bIMAGE SEARCH in the playback 3 Select a search condition. Only pic-
tures that match the search condi-
tion will be displayed. To delete or
2 Highlight one of the following op-
tions and press MENU/OK:
protect selected pictures or to view
the selected pictures in a slide show,
press MENU/OK and choose from the
following options:
Option See page
Option Description A ERASE 62
Find all pictures taken on a selected D PROTECT 95
BY DATE
date. I SLIDE SHOW 93
More on Playback
BY FACE Find all pictures containing faces.
BY I FAVORITES
Find all pictures with a specified rating
(P56).
4 To end the search, select EXIT SEARCH.
BY TYPE OF DATA Find all still pictures or all movies.
Find all pictures selected for upload to a
BY UPLOAD MARK
specified destination (P91).
61
A Deleting Pictures
To delete individual pictures, multiple selected pictures, or all pictures, ERASE
press the selector up (b), and choose from the options below. Note FRAME
Option Description
Press the selector left or right to scroll through pictures and press MENU/OK to delete the current pic-
FRAME
ture (a confirmation dialog is not displayed).
Highlight pictures and press MENU/OK to select or deselect (pictures that are protected or in a print
SELECTED FRAMES order are shown by S). When the operation is complete, press DISP/BACK to display a confirmation
dialog, then highlight OK and press MENU/OK to delete the selected pictures.
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected
ALL FRAMES pictures. Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was
pressed can not be recovered.
a
Protected pictures can not be deleted. Remove protection from any pictures you wish to delete (P95).
Pictures can also be deleted by AERASE from playback menu.
If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the
pictures.
62
Using Wireless Networks
You can connect the camera with a smartphone or a PC. For information on using wireless networks,
http://fujifilm-dsc.com/wifi/.
Wireless Networks
Before proceeding, download the free FUJIFILM Camera Remote app and install it on your smartphone.
1
This option can also be enabled by rWIRELESS COMMUNICATION from shooting or playback menu.
Time remaining
To end recording, press the z button again. Recording ends automatically when the movie reaches
maximum length or memory is full.
a
Exposure and white balance are adjusted automatically throughout recording. The color and brightness of the
image may vary from that displayed before recording begins.
Sounds made by the camera may be recorded.
Taking Photographs during Recording
Press the shutter button to take a photograph during recording.
Movies
a
The photo is saved separately from the movie and does not appear as part of the movie.
c
Photos can not be taken while a high-speed movie is being recorded.
The number of photos that can be taken is limited.
64
Recording Movies
c
The indicator lamp lights while movies are being recorded. Do not open the battery chamber during shooting
or while the indicator lamp is lit. Failure to observe this precaution could prevent the movie from being played
back.
Vertical or horizontal streaks may appear in movies containing very bright subjects. This is normal and does not
indicate a malfunction.
The temperature of the camera may rise if it is used to record movies for an extended period or if the ambient
temperature is high. This is normal and does not indicate a malfunction.
Movies
65
Recording Movies
Scene icon
66
a Viewing Movies
During playback (P55), 100-006
Progress is shown in the monitor during play-
movies are displayed in the back.
monitor as shown at right. 15s
Operation Description
2 Viewing Movies on a Computer
Press the selector down to start playback.
Start/pause Copy movies to the computer before viewing.
playback Press again to pause.
End Press the selector up to end playback. If 3
playback/playback is not in progress, pressing the Do not cover the speaker during playback.
delete selector up will delete the current movie.
Press the selector left or right to adjust play-
Advance/
back speed. Speed is shown by the num-
rewind
ber of arrows (M or N).
Press MENU/OK to pause playback and dis-
Adjust play volume controls. Press the selector
volume up or down to adjust the volume; press
Movies
MENU/OK again to set the volume.
67
Viewing Pictures on TV
Connecting the Camera to High Definition (HD) TVs
When an HDMI cable (available from third-party suppliers) is connected, pictures and sound are played
back on the TV.
1 Turn the camera off and connect an HDMI cable available from third party suppliers.
Insert into HDMI Insert into HDMI
connector connector
1
Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
The USB cable can not be used while an HDMI cable is connected.
2 Tune the television to the video or HDMI input channel. See the documentation supplied with the
television for details.
3 Press the a button for about a second to turn the camera on. The camera monitor turns off and
pictures and movies are played back on the TV. Note that the camera volume controls have no ef-
Connections
fect on sounds played on the TV; use the television volume controls to adjust the volume.
3
When connecting the cable, be sure the connectors are fully inserted.
68
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
Connecting the Camera Printing Selected Pictures
1 Connect the supplied USB cable as shown and 1 Press the selector left or right to dis-
turn the printer on. play a picture you wish to print.
Connections
00 SHEETS
FRAME
4 Press MENU/OK to start printing.
OK SET
69
Printing Pictures via USB
3 tion
Press MENU/OK to display a confirma-
dialog.
PRINT DPOF OK?
TOTAL: 9 SHEETS
YES CANCEL
70
Printing Pictures via USB
Connections
71
Printing Pictures via USB
72
Printing Pictures via USB
Connections
73
Printing Pictures via USB
1 RESET ALL
Print orders can contain a maximum of 999 pictures. To cancel the current print RESET DPOF OK?
74
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed,
organized, and printed. Before proceeding, install the software as described below. Do not connect the
camera to the computer until installation is complete.
Connections
75
Viewing Pictures on a Computer
76
Viewing Pictures on a Computer
2 After starting the computer and quitting any applications that may be running, insert the installer
CD in a CD-ROM drive and double-click SILKYRFCEXInstaller.
3 Enter an administrator name and password when prompted and click OK, then follow the on-screen
instructions to install. Click Exit to quit the installer when installation is complete.
4 Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software.
Installation is now complete. Proceed to Connecting the Camera on page 78.
Connections
77
Viewing Pictures on a Computer
Importing pictures or movies to Mac 2 Turn the camera off and connect the supplied
USB cable as shown, making sure the connec-
(Macintosh)
tors are fully inserted. Connect the camera di-
Use a standard application in Mac OS such as Im- rectly to the computer; do not use a USB hub
age Capture to import pictures or movies to Mac. or keyboard.
Connecting the Camera
1 Ifmemory
the pictures you wish to copy are stored on a
card, insert the card into the camera
(P11).
1
Windows users may require the Windows CD when
starting the software for the first time.
3 Press the a button for about a second to
turn the camera on. After starting MyFinePix
3
Studio, follow the on-screen instructions to
Loss of power during transfer could result in loss of copy pictures to the computer. To exit without
data or damage to the memory card. Charge the copying pictures, click Cancel.
battery before connecting the camera.
For more information on using the supplied soft-
ware, start the application and select the appro-
priate option from the Help menu.
78
Viewing Pictures on a Computer
Connections
79
Using the Menus: Shooting Mode
Using the Shooting Menu
1 Press MENU/OK to display the shoot-
ing menu.
4 Press the selector up or down to
highlight the desired option.
80
Using the Menus: Shooting Mode
Menus
This option controls how the camera selects the focus
F MOVIE AF MODE r/u u
area for movies (P86).
81
Using the Menus: Shooting Mode
82
Using the Menus: Shooting Mode
Menus
83
Using the Menus: Shooting Mode
84
Using the Menus: Shooting Mode
Menus
85
Using the Menus: Shooting Mode
86
Using the Menus: Shooting Mode
gEXTERNAL FLASH
Choose ON when using an optional flash unit (ex-
cept Fujifilm products) mounted on the camera
hot shoe.
c
The flash may not fully light the subject at speeds
faster than 1/1000s.
Use auto or custom white balance (P51).
If the built-in flash is raised when ON is selected for
gEXTERNAL FLASH, the built-in flash will fire once
to provide a signal for the optional flash unit to fire.
Fujifilm external flash units do not require this setting.
a
The camera can be used with flash units that provide
aperture adjustment, external metering, and sensitiv-
ity control. Some flash units that are designed spe-
cifically for other cameras can not be used.
For information on Fujifilm external flash units, see
Accessories from FUJIFILM (P111).
Menus
87
Using the Menus: Playback Mode
Using the Playback Menu Playback Menu Options
1 back
Press the a button to enter play-
mode.
The following options are available:
Option Description
When connecting to smartphones, you
2 back
Press MENU/OK to display the play-
menu.
can use the following functions:
Taking pictures using smartphones
Uploading pictures to smartphones
3 Press the selector up or down to
highlight the desired menu item.
r WIRELESS COM-
Browsing and downloading the pic-
tures on the camera using smart-
MUNICATION
phones
Downloading location data from
4 Press the selector right to display op-
tions for the highlighted item.
smartphones
For information on using wireless net-
works, visit http://fujifilm-dsc.com/wifi/.
88
Using the Menus: Playback Mode
Option Description
Protect pictures from accidental dele-
D PROTECT
tion (P95).
Create cropped copies of pictures
G CROP
(P96).
O RESIZE Create small copies of pictures (P97).
C IMAGE ROTATE Rotate pictures (P98).
Copy pictures from internal memory to
E COPY
a memory card (P99).
Create books from your favorite photos
k PHOTOBOOK ASSIST
(P59).
Select pictures for printing on DPOF-
K PRINT ORDER
and PictBridge-compatible devices
(DPOF)
(P72).
Choose how High Definition (HD) de-
J DISP. ASPECT
vices display pictures (P99).
Menus
89
Using the Menus: Playback Mode
iMOVIE EDIT
Edit movies.
frame is reached.
2 Press MENU/OK.
2
YouTube, Facebook or MyFinePix.com is displayed
to indicate items queued for upload.
3 Select items to be added to, or re-
moved from, the upload queue.
Only movies can be selected for upload to YouTube.
Only photos can be selected for upload to MyFinePix.
com.
4 Press MENU/OK to confirm.
Items not in the upload queue will
During playback, selected pictures are indicated by
jYouTube, jFacebook or jMyFinePix.com
be added to the queue when you icons.
select them and press MENU/OK.
Items in the upload queue will be
removed from the queue when you
select them and press MENU/OK.
Menus
91
Using the Menus: Playback Mode
OK
CANCEL
SET
2 Select OK. 1
This feature is available only when using a computer
running Windows.
3 Press MENU/OK.
All items are removed from the up-
load queue.
1
If there are many items in the upload queue when you
select to remove all items from the queue, it may take
some time to remove them. To cancel, press DISP/BACK.
92
Using the Menus: Playback Mode
ISLIDE SHOW
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start. Press
DISP/BACK at any time during the show to view on-screen help. When a movie is displayed, movie play-
back will begin automatically, and the slide show will continue when the movie ends. The show can
be ended at any time by pressing MENU/OK.
Option Displayed in
NORMAL Press selector left or right to go back or skip ahead one frame. Select FADE-IN for fade transitions between
FADE-IN frames.
NORMAL g
As above, except that camera automatically zooms in on faces selected with Intelligent Face detection.
FADE-IN g
1
The camera will not turn off automatically while a slide show is in progress.
Menus
93
Using the Menus: Playback Mode
YES CANCEL
1
Red eye may not be removed if the camera is unable to detect a face or the face is in profile. Results may differ
depending on the scene. Red eye can not be removed from pictures that have already been processed using
red-eye removal or pictures created with other devices.
The amount of time needed to process the image varies with the number of faces detected.
Copies created with BRED EYE REMOVAL are indicated by a e icon during playback.
94
Using the Menus: Playback Mode
D PROTECT
Protect pictures from accidental deletion. The following options are available.
FRAME SET ALL
Protect selected pictures. Press MENU/OK to protect all SET ALL OK?
IT MAY TAKE A WHILE
RESET ALL
Press MENU/OK to remove pro- RESET ALL OK?
IT MAY TAKE A WHILE
Menus
95
Using the Menus: Playback Mode
G CROP
To create a cropped copy of a picture, play the picture back and select GCROP in the playback menu
(P88).
1 Use the zoom control to zoom in and out and 2 Press MENU/OK to view the copy size.
use the selector to scroll the picture until the Larger crops produce larger copies.
desired portion is displayed (to exit to single-
frame playback without creating a cropped 3 Press MENU/OK to save the cropped
copy to a separate file.
copy, press DISP/BACK).
Zoom indicator 1
CROP Pictures taken with other cameras can not be cropped.
Navigation window
shows portion of
image currently dis-
YES CANCEL played in monitor
96
Using the Menus: Playback Mode
ORESIZE
To create a small copy of a picture, play the picture back and select ORESIZE in the playback menu
(P88).
Menus
97
Using the Menus: Playback Mode
C IMAGE ROTATE
By default, pictures taken in tall orientation are
displayed in wide orientation. Use this option to
1 Press the selector down to rotate the
picture 90 clockwise, up to rotate
display pictures in the correct orientation in the the picture 90 counterclockwise.
monitor. It has no effect on pictures displayed on
a computer or other device.
1
Protected pictures can not be rotated. Remove pro-
tection before rotating pictures (P95).
The camera may not be able to rotate pictures cre-
ated with other devices.
98
Using the Menus: Playback Mode
Menus
DPOF print information is not copied (P72).
99
The Setup Menu
Using the Setup Menu
1 Display the setup menu.
1.1 Press MENU/OK to display the
2 Adjust settings.
2.1 Press the selector right to acti-
menu for the current mode. vate the setup menu.
1.2 Press the selector left to high- 2.2 Press the selector up or down
light a left tab. to highlight a menu item.
1.3 Press the selector up or down
to select 4. 2.3 Press the selector right to dis-
The setup menu appears. play options for the highlighted
SET-UP 1 /5
item.
DATE/TIME
100
The Setup Menu
Menus
101
The Setup Menu
102
The Setup Menu
Menus
103
The Setup Menu
N TIME DIFFERENCE
When travelling, use this option to switch the camera clock instantly from your home time zone to the
local time at your destination.
1 Specify the difference between local time 2 Switch between local time and your home
and your home time zone. time zone.
1.1 Press the selector up or down To switch between local time and your
to highlight gLOCAL. home time zone, highlight gLOCAL or
hHOME and press MENU/OK.
hHOME: Switch to the time currently se-
1.2 Press the selector right to dis-
lected for FDATE/TIME (P17).
play the time difference.
gLOCAL: Switch to local time. If this option
1.3 Press the selector left or right is selected, g and the time and date will
to highlight +, , hours, or min- be displayed in yellow for three seconds
utes; press up or down to edit. each time the camera is turned on.
1.4 Press MENU/OK when settings
are complete.
12/31/2050 10 : 00 AM
104
The Setup Menu
Menus
C/B is selected in the shooting mode.
An option other than OFF is selected for
ICONTINUOUS.
105
The Setup Menu
Menus
107
The Setup Menu
108
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
FINEPIX S1 Series
Printing
Audio/Visual
HDMI cable (sold separately)
HDTV*1
PictBridge-compatible
printer*1 SD/SDHC/SDXC
memory card
Printer* 1
Computer Related
USB cable (supplied)
Technical Notes
SD card slot or card reader
Computer* 1
* Available separately.
1
109
Optional Accessories
110
Optional Accessories
Shoe-mounted EF-20 This hot-shoe clip-on flash unit has a guide number of
flash units 20 (ISO 100), supports i-TTL, can be angled up to 90
for bounce-flash photography, and takes two AA 1.5 V
batteries.
EF-42 This hot-shoe clip-on flash unit has a guide number of
42 (ISO 100), features 24105 mm auto zoom, supports
i-TTL, can be angled up to 90 for bounce-flash pho-
tography, and takes four AA 1.5 V batteries.
EF-X20 This clip-on flash unit has a guide number of 20 (ISO
100, m/ft.), supports i-TTL, manual exposure and slave
flash, and takes two AA 1.5 V batteries.
Adapter ring AR-S1 It is used when attaching the PRF-72 protector filter or 72 mm filters avail-
able from third-party suppliers.
Protector Filter PRF-72 Protect the lens from scratches caused by sand, dust, and other foreign ob-
jects when shooting outdoors. The AR-S1 adapter ring is required when
attaching the filter.
Technical Notes
111
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use Water and Sand
If the camera will not be used for an extended pe- This camera cannot be used under water. Keep
riod, remove the battery and memory card. Avoid the camera against penetration of garbage, mud,
using the camera for extended periods or storing sand, dust, water, harmful gas, salt, and so on. Do
it in locations that are: not place the camera on a wet surface. Make sure
exposed to steam or smoke the covers (caps) for the battery, card slot and
very humid or extremely dusty ports are securely closed before use. If the cam-
exposed to direct sunlight or very high tempera- era is exposed to rain, droplets of water, and so
tures, such as in a closed vehicle on a sunny day on, dry it thoroughly.
extremely cold
Condensation
subject to strong vibration
Sudden increases in temperature, such as occur
exposed to strong magnetic fields, such as near
when entering a heated building on a cold day,
a broadcasting antenna, power line, radar emit-
can cause condensation inside the camera. If this
ter, motor, transformer, or magnet
occurs, turn the camera off and wait an hour be-
in contact with volatile chemicals such as pesti-
fore turning it on again. If condensation forms on
cides
the memory card, remove the card and wait for
next to rubber or vinyl products
the condensation to dissipate.
112
Caring for the Camera
Cleaning
Use a blower to remove dust from the lens and
monitor, then gently wipe with a soft, dry cloth.
Any remaining stains can be removed by wiping
gently with a piece of FUJIFILM lens-cleaning pa-
per to which a small amount of lens-cleaning fluid
has been applied. Care should be taken to avoid
scratching the lens or monitor. The camera body
can be cleaned with a soft, dry cloth. Do not use
alcohol, thinner, or other volatile chemicals.
Traveling
Keep the camera in your carry-on baggage.
Checked baggage may suffer violent shocks that
could damage the camera.
Technical Notes
113
Troubleshooting
Power and Battery
Problem Possible cause Solution Page
The batteries are exhausted. Insert fresh or fully-charged spare batteries. 9
The camera does The batteries are not in the correct orienta- Re-insert the batteries in the correct orienta-
9
not turn on. tion. tion.
The battery-chamber cover is not latched. Latch the battery-chamber cover. 10
Warm the batteries by placing them in a pocket
The batteries are cold. or other warm place and re-insert them in the vii
camera immediately before taking a picture.
There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth.
The batteries run
ON is selected for MONITOR SUNLIGHT
down quickly. Select OFF to reduce the drain on the battery. 7
MODE.
The camera is in M mode. Select another shooting mode. 24
Power uCONTINUOUS is selected for FFO-
Select a different focusing option. 52
supply CUS MODE.
The camera turns
The batteries are exhausted. Insert fresh or fully-charged spare batteries. 9
off suddenly.
Reinsert the battery in the correct orientation
Charging does
and make sure that the power connection is 14
not start.
made.
Charging is slow. Charge the battery at room temperature.
Troubleshooting
There is dirt on the battery terminals. Clean the terminals with a soft, dry cloth.
The indicator
The battery has reached the end of its charging
lamp flashes and
The battery has been charged many times. life. Purchase a new battery. If the battery still
the battery does
fails to charge, contact your FUJIFILM dealer.
not charge.
The battery is too hot or too cold. Wait for the battery temperature to stabilize. 14
114
Troubleshooting
Shooting
Problem Possible cause Solution Page
Memory is full. Insert a new memory card or delete pictures. 11, 62
No picture is Memory is not formatted. Format the memory card. 105
taken when
There is dirt on the memory card contacts. Clean the contacts with a soft, dry cloth.
the shutter
The memory card is damaged. Insert a new memory card. 11
Taking button is
pictures pressed. The batteries are exhausted. Insert fresh or fully-charged spare batteries. 9
The camera has turned off automatically. Turn the camera on. 16
The monitor
The monitor may darken while the flash
goes dark after The flash has fired. 41
charges. Wait for the flash to charge.
shooting.
The camera The subject is close to the camera. Select macro mode.
40
Focus does not The subject is far away from the camera. Cancel macro mode.
focus. The subject is not suited to autofocus. Use focus lock. 38
Troubleshooting
115
Troubleshooting
116
Troubleshooting
Troubleshooting
117
Troubleshooting
Playback
Problem Possible cause Solution Page
Pictures are The pictures were taken with a different make or
grainy. model of camera.
Pictures The picture has been resized or cropped to
Playback zoom
a/b or is from another make or model of 55
unavailable.
camera.
The camera is in silent mode. Turn silent mode off. 101
No sound in
Playback volume is too low. Adjust playback volume. 106
Audio movie play-
The microphone was obstructed. Hold the camera correctly during recording. 64
back.
The speaker is obstructed. Hold the camera correctly during playback. 67
Selected
Some of the pictures selected for deletion are Remove protection using the device with
Deletion pictures not 95
protected. which it was originally applied.
deleted.
File number-
The battery-chamber cover was opened while Turn the camera off before opening the bat-
Frame no. ing is unex- 16
the camera was on. tery-chamber cover.
pectedly reset.
118
Troubleshooting
Connections
Problem Possible cause Solution Page
Monitor is off. The camera is connected to a TV. View pictures on the TV. 68
The camera is not properly connected. Connect the camera correctly. 68
TV No picture or
Input on the television is set to TV. Set the TV input correctly.
sound.
The volume on the television is too low. Adjust the volume.
The com-
puter does not
The camera is not properly connected. Connect the camera correctly. 78
recognize the
camera.
Computer
Can not
transfer RAW Use the bundled software to transfer pic-
75
or JPEG fifi les tures.
to computer.
Pictures can The camera is not properly connected. Connect the camera correctly. 69
not be printed. The printer is off. Turn the printer on.
Only one copy
PictBridge
is printed.
The printer is not PictBridge-compatible.
The date is not
printed.
Troubleshooting
119
Troubleshooting
Wireless Networks
Problem Possible cause Solution Page
The smartphone is too far away. Move the devices closer.
Move the camera and smartphone away
Nearby devices are causing radio interference.
from microwave ovens or cordless phones.
The smartphone and camera can connect to
The smartphone is connected to another de-
Problem connecting or upload- only one device at a time. End the connec-
vice.
ing pictures to smartphone. tion and try again.
Can not shoot photos using a Try connecting again. The presence of mul-
smartphone. There are several smartphones in the vicinity. tiple smartphones can make connection dif-
ficult.
The current image was created on another
device and can not be uploaded to a smart-
phone.
Select ON for rWIRELESS SETTING >
RESIZE IMAGE FOR SMARTPHONE H. Se-
Smartphone will not display
lecting OFF increases upload times for larger
pictures.
images; in addition, some phones may not
display images over a certain size.
120
Troubleshooting
Miscellaneous
Problem Possible cause Solution Page
Nothing happens Temporary camera malfunction. Remove and reinsert the battery. 9
when the shutter but-
ton is pressed. The batteries are exhausted. Insert fresh or fully-charged spare batteries. 9
The camera does not Remove and reinsert the battery. If the prob-
Temporary camera malfunction. 9
function as expected. lem persists, contact your FUJIFILM dealer.
No sound. Turn silent mode off. 101
Hue or content of
display changes unex- ON is selected for MONITOR SUNLIGHT MODE. Choose OFF for MONITOR SUNLIGHT MODE. 7
pectedly.
Date and time added
by SDATE STAMP The camera clock is not correctly set. Reset the date and time. 17
are not correct.
Added shooting date and time can not
Date and time are T+U or T is selected for SDATE STAMP be deleted from the pictures. To take pic-
108
added to the pictures. option. tures without date and time, select OFF for
SDATE STAMP.
Troubleshooting
121
Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning Description Solution
B (red) Batteries are low.
Insert fresh or fully-charged spare batteries.
A (blinks red) Batteries are exhausted.
k Slow shutter speed. Picture may be blurred. Use the flash or mount the camera on a tripod.
s
Use focus lock to focus on another subject at the
(displayed in red
The camera can not focus. same distance, then recompose the picture (P38).
with red focus
Use macro mode to focus when taking close-ups.
frame)
Aperture or shutter The subject is too bright or too dark. The pic-
If the subject is dark, use the flash.
speed shown in red ture will be over- or under-exposed.
FOCUS ERROR
Camera malfunction.
LENS CONTROL ERROR Turn the camera off and then on again, taking care not
TURN THE CAMERA OFF, REMOVE to touch the lens. If the message persists, contact a
LENS CAP OR OBSTRUCTION AND FUJIFILM dealer.
TURN THE CAMERA ON
The camera has been used continuously at
p high temperatures. If no action is taken, the Turn the camera off and wait for it to cool.
camera will turn off automatically.
122
Warning Messages and Displays
Troubleshooting
FUJIFILM dealer.
WRITE ERROR
Not enough memory remaining to record ad- Delete pictures or insert a memory card with more free
ditional pictures. space.
The memory card is not formatted. Format the memory card (P105).
123
Warning Messages and Displays
124
Warning Messages and Displays
Troubleshooting
125
Memory Card Capacity
The following table shows the recording time or number of pictures available at different image sizes.
All figures are approximate; file size varies with the scene recorded, producing wide variations in the
number of files that can be stored. The number of exposures or length remaining may not diminish
at an even rate.
Photographs
O P Q
4:3 3:2 16:9 1:1 4:3 3:2 16:9 1:1 4:3 3:2 16:9 1:1
FINE 500 560 670 670 1000 1110 1320 1340 1960 2210 3640 2580
4GB
NORMAL 1000 1120 1330 1330 1950 2210 2580 2640 3760 4270 6890 4960
FINE 1010 1140 1350 1350 2000 2240 2640 2700 3950 4440 7320 5180
8GB
NORMAL 2000 2260 2670 2670 3950 4440 5180 5290 7540 8580 13830 9960
Movies
i 1920 1080 h 1280 720 f 640 480 Y 640 480 Y 320 240 Y 240 180
(60 fps) 1 (60 fps) 2 (30 fps) (120 fps) (240 fps) (480 fps)
4GB 14 min. 22 min. 79 min. 29 min. 41 min. 27 min.
8GB 27 min. 44 min. 155 min. 57 min. 80 min. 53 min.
1 Individual movies can not exceed 15 minutes in length.
2 Individual movies can not exceed 24 minutes in length.
3 Use a H or better when shooting full HD movies.
4 Use a H card or better.
126
Specifications
System
Model Digital Camera FinePix S1 Series
Effective pixels 16.4 million
Image sensor 1/
2.3-in., square-pixel CMOS with primary color filter
127
Specifications
System
Exposure compensation 2EV+2EV in increments of 1/3EV (P, S, and A modes)
Picture stabilization Optical stabilization, lens shift
Shutter speed (combined P, S, A: 4s1/2,000s M: 30s1/2,000s H: 3s1/2,000s
mechanical and electronic P: 4s1/2s Other modes: 1/4s1/2,000s
shutter)
Continuous Approx. frame rate (fps) Continuous frames
O 3.0 9
K 5.0 9
J 10.0 9
P 3.0, 5.0, 10.0 9
O 10.0 3 frames (selected exposure, overexposure,
underexposure)
Bracketing 1/3EV, 2/3EV, 1EV
Focus Mode: CENTER/MULTI/AREA/CONTINUOUS/TRACKING
Autofocus system: Contrast-detect TTL AF
White balance Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluorescent,
warm white fluorescent, cool white fluorescent, and incandescent lighting; custom white balance
Self-timer Off, 2sec, 10sec, INTERVAL SHOOTING
Flash Manual pop-up flash with CMOS-metered auto flash control (using monitor pre-flashes); effective range
when sensitivity is set to ISO AUTO is approx. 45cm8.0m/1.4ft.26.2ft. (wide angle) or 3.5m4.0m/11.4ft.
13.1ft. (telephoto); effective range in macro mode is approx. 30cm3.0m/0.9ft.9.8ft. (wide angle) or
2.0m4.0m/6.5ft.13.1ft. (telephoto)
Flash modes Auto, forced flash, off, slow synchro (red-eye removal off); auto with red-eye removal, forced flash
with red-eye removal, off, slow sync with red-eye removal (red-eye removal on)
Electronic viewfinder (EVF) 0.2-in. (0.5 cm), 920k-dot color LCD viewfinder
Frame coverage Approx. 97% (shooting), 100% (playback)
128
Specifications
System
Monitor 3.0-in. (7.6 cm), 920k-dot color LCD monitor
Frame coverage Approx. 97% (shooting), 100% (playback)
Movie frame rate i1920 1080: 1080p, 60fps h1280 720: 720p, 60fps
f640 480: VGA, 30 fps k640480: 120fps
k320240: 240fps k240180: 480fps
Input/output terminals
HDMI output HDMI Mini Connector
Digital input/output USB 2.0 High Speed
Power supply/other
Power sources NP-85 rechargeable battery
Battery life (approximate Battery type Approximate number of frames
number of frames that can NP-85 (type supplied with camera) 350
be taken with fresh or fully
CIPA standard, measured in B (auto) mode using battery supplied with camera and SD memory card.
charged batteries)
Note: Number of shots that can be taken with battery varies with battery charge level and will decline
at low temperatures.
Camera dimensions 133.1 mm 90.9 mm 110.3 mm/5.2 in. 3.6 in. 4.3 in. (W H D), excluding projections
Shooting weight Approx. 680 g/24.0 oz., including batteries and memory card
Camera weight Approx. 640 g/22.6 oz., excluding batteries, accessories, and memory cards
Operating conditions Temperature: 0C+40C/+32F+104F Humidity: 10%80% (no condensation)
Wireless transmitter
Standards IEEE 802.11b/g/n (standard wireless protocol)
Operating frequency U.S.A., Canada, Taiwan: 2,412MHz2,462MHz (11 channels)
Other countries: 2,412MHz2,472MHz (13 channels)
129
Specifications
Wireless transmitter
Access protocols Infrastructure
AC power adapter
Rated input 100V240V AC, 50/60Hz
Input capacity 100 V: 11.6VA 240 V: 15.5VA
Rated output 5.0V DC, 1000mA
Operating temperature 0C+40C/+32F+104F
Weight Approx. 32g/1.1oz.
Weight and dimensions vary with the country or region of sale.
130
Specifications
131
Memo
132
Memo
133
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Please contact your local distributor for repairs and technical support. (see Worldwide
Network list)
Restrictions on Camera Settings
Shooting Mode and Camera Settings
The options available in each shooting mode are listed below.
Shooting mode
Adv. SP
Option MB ajkCB C M N O H P Q R S U V W N P S A M
OFF 4 4 4 4 4 4 41 41 41 41 41 41 41 41 41 41 41 4 4 4 4
F F 4 4 4 4 4 4 41 41 4 4 4 4
G 4 4 4 4 4 4 4 4 4
AUTO 4 4 4 4 4 4 4 4 41 4
J N 4 4 4 41 4 4 4 41 4 4 41 4 41 4 41
OFF O 4 4 41 41 4 4
P3 41 41 41 41 41 41
N2
K 4 4 4 4 4 4 4 41 4
J L 4 4 4 41 4 4 41 4 4 4 41 4 41
ON M 4 4 41 41 4 4
P3 41 41
d4 4 4 4
O 4 4 4 4
P 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
J 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
I
K 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
O 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
OFF 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
S/R 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
J
e 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Restrictions on Camera Settings
Shooting mode
Adv. SP
Option MB ajkCB C M N O H P Q R S U V W N P S A M
AUTO (3200) 4 4 4
AUTO (1600) 4 4 4
AUTO (800) 4 4 4
AUTO (400) 4 4 4
128005 4 4 4 4
64006 4 4 4 4
N
3200 4 4 4 4
1600 4 4 4 4
800 4 4 4 4
400 4 4 4 4
200 4 4 4 4
100 4 4 4 4
O 4:3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
O 3:2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
O 16:9 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
O 1:1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
P 4:3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
P 3:2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
O
P 16:9 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
P 1:1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Q 4:3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Q 3:2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Q 16:9 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Q 1:1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Restrictions on Camera Settings
Shooting mode
Adv. SP
Option MB ajkCB C M N O H P Q R S U V W N P S A M
FINE 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
NORMAL 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
T FINE+RAW 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
NORMAL+RAW 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
RAW 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
c 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
a 4 4 4 4 4 4 4 4 4 4
P
b 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
f 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
D 4 4 4 4
OFF 4 4 4 4 4 4 4 41 41 4 4 41 4 4 4 4 41 41 41 4 4 4 4
b
ON 41 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
C7 4 4 4 4
F 4 4 4 4 4
F (F) 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
i 1920 1080 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
h 1280 720 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
f 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
W
Y 640 480 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Y 320 240 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Y 240 180 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
I 4 4 4 4
g 4 4 4 4
K 4 4 4 4
J 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
E 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
L 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
R 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Restrictions on Camera Settings
Shooting mode
Adv. SP
Option MB ajkCB C M N O H P Q R S U V W N P S A M
C 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
1 Automatically optimized for selected shooting mode.
2 Flash turns off automatically in super macro mode (G).
3 Lower flash to select P in modes other than D.
4 Disabled if flash fires when set to A or K or if flash is set to N or L and subject is poorly lit.
5 Image sizes over Q are set to Q.
6 Image sizes over P are set to P.
7 Fixed at o when Intelligent Face Detection is on.