Você está na página 1de 8

Worldwide

www.tyco-fire.com
Contacts

Type D3 PROTECTOSPRAY
Directional Spray Nozzles, Open,
TFP802 Appendix Material
General The owner is responsible for main-
taining their fire protection system
Description and devices in proper operating con-
dition. Contact the installing contrac-
TYCO Type D3 PROTECTOSPRAY tor or product manufacturer with any
Nozzles are open (non-automatic) questions.
directional spray nozzles and they are
designed for use in water spray fixed Appendix
systems for fire protection applica-
tions. The Type D3 Nozzles are external
deflector-type nozzles that discharge a
Material
uniformly filled cone of medium velocity As fixed directional spray nozzles,
water droplets. TYCO Type D3 PROTECTOSPRAY
Nozzles can be installed at any fixed
They are especially effective in cov- angle of 0 degrees (pointed straight
ering exposed vertical, horizontal, down) to 180 degrees (pointed straight
curved, and irregular shaped surfaces up). As a function of the fixed angle, i.e.,
in a cooling spray to prevent excessive installed position, the maximum axial
absorption of heat from an external distance between the nozzle tip and the
fire and possible structural damage or plane-of-protection at which the spray
spread of fire to the protected equip- profile remains concentric with the cen-
ment. In some applications, depending terline of the nozzle varies due to the
on water design density requirements, combination of the water spray exit
they may also be used for fire control velocity and affect of gravity. The axial
and extinguishment. distance, therefore, becomes shorter
The Type D3 Nozzles are available in a as the fixed angle is changed from 0
wide variety of orifice sizes and spray degrees to 180 degrees.
profile angles (included angles of dis- Technical Data Sheet TFP802 provides
charge), as described in Technical Data the maximum axial distance for expo-
Sheet TFP802, to provide versatility in sure protection over the fixed angle
system design. range of 0 to 180 degrees. Figures 1
through 7 in this technical data sheet
NOTICE have been prepared as reference to
The Type D3 PROTECTOSPRAY illustrate the fixed angles of 0 degrees
Nozzles described herein must be and 90 degrees. These illustrations
installed and maintained in compliance have been based on the informa-
with Technical Data Sheet TFP802, as tion provided in Technical Data Sheet
well as with the applicable standards of TFP802.
the National Fire Protection Association
(NFPA), in addition to the standards of
any other authorities having jurisdiction.
Limited
Failure to do so may impair the perfor-
mance of these devices.
Warranty
For warranty terms and conditions, visit
www.tyco-fire.com.
IMPORTANT
Always refer to Technical Data
Sheet TFP700 for the INSTALLER
WARNING that provides cautions
with respect to handling and instal-
lation of sprinkler systems and com-
ponents. Improper handling and
installation can permanently damage
a sprinkler system or its compo-
nents and cause the sprinkler to fail
to operate in a fire situation or cause
it to operate prematurely.

Page 1 of 8 DECEMBER 2016 TFP802A


TFP802A
Page 2 of 8

DISTANCE FROM
NOZZLE CENTERLINE, METERS
4,0 3,5 3,0 2,5 2,0 1,5 1,0 0,5 0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0
0
AXIAL DISTANCE FROM NOZZLE, METERS
0,5

1,0 180

160

SPRAY PROFILE ANGLE


1,5
140
2,0
125
2,5
110
3,0
95
3,5
80
4,0 65
4,5

5,0

AXIAL DISTANCE
FROM NOZZLE, METERS
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5
3,0

2,5

2,0

1,5
NOZZLE CENTERLINE, METERS

1,0
DISTANCE FROM

0,5

0,5

1,0

1,5

2,0

2,5

3,0
180 160 140 125 110 95 80 65
SPRAY PROFILE ANGLE

FIGURE 1
NO. 16 ORIFICE SPRAY PROFILES
AT 0 DEGREES (DOWN) AND 90 DEGREES (HORIZONTAL) FIXED ANGLE OF ORIENTATION
TFP802A
Page 3 of 8

DISTANCE FROM
NOZZLE CENTERLINE, METERS
4,0 3,5 3,0 2,5 2,0 1,5 1,0 0,5 0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0
0
AXIAL DISTANCE FROM NOZZLE, METERS
0,5

1,0 180

160

SPRAY PROFILE ANGLE


1,5
140
2,0
125
2,5
110
3,0
95
3,5
80
4,0 65
4,5

5,0

AXIAL DISTANCE
FROM NOZZLE, METERS
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5
3,0

2,5

2,0

1,5
NOZZLE CENTERLINE, METERS

1,0
DISTANCE FROM

0,5

0,5

1,0

1,5

2,0

2,5

3,0
180 160 140 125 110 95 80 65
SPRAY PROFILE ANGLE

FIGURE 2
NO. 18 ORIFICE SPRAY PROFILES
AT 0 DEGREES (DOWN) AND 90 DEGREES (HORIZONTAL) FIXED ANGLE OF ORIENTATION
TFP802A
Page 4 of 8

DISTANCE FROM
NOZZLE CENTERLINE, METERS
4,0 3,5 3,0 2,5 2,0 1,5 1,0 0,5 0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0
0
AXIAL DISTANCE FROM NOZZLE, METERS
0,5

1,0 180

160

SPRAY PROFILE ANGLE


1,5
140
2,0
125
2,5
110
3,0
95
3,5
80
4,0 65
4,5

5,0

AXIAL DISTANCE
FROM NOZZLE, METERS
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5
3,0

2,5

2,0

1,5
NOZZLE CENTERLINE, METERS

1,0
DISTANCE FROM

0,5

0,5

1,0

1,5

2,0

2,5

3,0
180 160 140 125 110 95 80 65
SPRAY PROFILE ANGLE

FIGURE 3
NO. 21 ORIFICE SPRAY PROFILES
AT 0 DEGREES (DOWN) AND 90 DEGREES (HORIZONTAL) FIXED ANGLE OF ORIENTATION
TFP802A
Page 5 of 8

DISTANCE FROM
NOZZLE CENTERLINE, METERS
4,0 3,5 3,0 2,5 2,0 1,5 1,0 0,5 0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0
0
AXIAL DISTANCE FROM NOZZLE, METERS
0,5

1,0 180

160

SPRAY PROFILE ANGLE


1,5
140
2,0
125
2,5
110
3,0
95
3,5
80
4,0 65
4,5

5,0

AXIAL DISTANCE
FROM NOZZLE, METERS
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5
3,0

2,5

2,0

1,5
NOZZLE CENTERLINE, METERS

1,0
DISTANCE FROM

0,5

0,5

1,0

1,5

2,0

2,5

3,0
180 160 140 125 110 95 80 65
SPRAY PROFILE ANGLE

FIGURE 4
NO. 24 ORIFICE SPRAY PROFILES
AT 0 DEGREES (DOWN) AND 90 DEGREES (HORIZONTAL) FIXED ANGLE OF ORIENTATION
TFP802A
Page 6 of 8

DISTANCE FROM
NOZZLE CENTERLINE, METERS
4,0 3,5 3,0 2,5 2,0 1,5 1,0 0,5 0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0
0
AXIAL DISTANCE FROM NOZZLE, METERS
0,5

1,0 180

160

SPRAY PROFILE ANGLE


1,5
140
2,0
125
2,5
110
3,0
95
3,5
80
4,0 65
4,5

5,0

AXIAL DISTANCE
FROM NOZZLE, METERS
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5
3,0

2,5

2,0

1,5
NOZZLE CENTERLINE, METERS

1,0
DISTANCE FROM

0,5

0,5

1,0

1,5

2,0

2,5

3,0
180 160 140 125 110 95 80 65
SPRAY PROFILE ANGLE

FIGURE 5
NO. 28 ORIFICE SPRAY PROFILES
AT 0 DEGREES (DOWN) AND 90 DEGREES (HORIZONTAL) FIXED ANGLE OF ORIENTATION
TFP802A
Page 7 of 8

DISTANCE FROM
NOZZLE CENTERLINE, METERS
4,0 3,5 3,0 2,5 2,0 1,5 1,0 0,5 0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0
0
AXIAL DISTANCE FROM NOZZLE, METERS
0,5

1,0

1,5 180

160

SPRAY PROFILE ANGLE


2,0
140
2,5
125
3,0
110
3,5
95
4,0
80
4,5 65
5,0

AXIAL DISTANCE
FROM NOZZLE, METERS
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5
3,0

2,5

2,0

1,5
NOZZLE CENTERLINE, METERS

1,0
DISTANCE FROM

0,5

0,5

1,0

1,5

2,0

2,5

3,0
180 160 140 125 110 95 80 65
SPRAY PROFILE ANGLE

FIGURE 6
NO. 32 ORIFICE SPRAY PROFILES
AT 0 DEGREES (DOWN) AND 90 DEGREES (HORIZONTAL) FIXED ANGLE OF ORIENTATION
TFP802A
Page 8 of 8

DISTANCE FROM
NOZZLE CENTERLINE, METERS
4,0 3,5 3,0 2,5 2,0 1,5 1,0 0,5 0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0
0
AXIAL DISTANCE FROM NOZZLE, METERS
0,5

1,0

1,5 180

160

SPRAY PROFILE ANGLE


2,0
140
2,5
125
3,0
110
3,5
95
4,0
80
4,5 65
5,0

AXIAL DISTANCE
FROM NOZZLE, METERS
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5
3,0

2,5

2,0

1,5
NOZZLE CENTERLINE, METERS

1,0
DISTANCE FROM

0,5

0,5

1,0

1,5

2,0

2,5

3,0
180 160 140 125 110 95 80 65
SPRAY PROFILE ANGLE

FIGURE 7
NO. 34 ORIFICE SPRAY PROFILES
AT 0 DEGREES (DOWN) AND 90 DEGREES (HORIZONTAL) FIXED ANGLE OF ORIENTATION

GLOBAL HEADQUARTERS | 1400 Pennbrook Parkway, Lansdale, PA 19446 | Telephone +1-215-362-0700


Copyright 2016 Tyco Fire Products, LP. All rights reserved.

Você também pode gostar