Escolar Documentos
Profissional Documentos
Cultura Documentos
Your new earphone has enough power to pair and make a few
1. Volume + I Track forvvard calls It takes 2 hours to fully charge t he earphone; while charging,
the battery indicator light is red, the indicator light flashes blue
2. Multifunction button
once charging is compete
3 Volume - / Track back
4 Charge jack Note: The lifetime of the battery will be significantly reduced if
your earphone 1s left uncharged tor a long period. We recommend
5. ANC button that you recharge your earphone at least once a month.
o--,
6. Banery
7. Talking m1c
& Status indicator
Oo Do--t-
I
I
1
USB cable Ear cushions 2
3 I
I
6
7 c=Jo--J
Pair one phone 3 Select "DYLAN'. If your phone asks, enter 0000 {four zeros) for the
Windows Phone 8 Pass code or accept the connection. The LED indicator stops flashing
Note: When the earphone and phone have been paired once. red and blue once successfully paired, you hear "Connection successful'.
they will automatically connect when the earphone is on and a.On your phone, open the Settings menu.
Some phone list an option to 'Play through earphone', select to use tile
Bluetooth is activated on the phone. b.Select Bluetooth. If Bluetooth is off, turn it on.
earphones.
The Phone will search for new devices automatically
1.Make sure the earphone is turned off and within 1 meter of your
phone. press and hold the Multifunction button until the LED
indicator flashes red and blue alternately {About 7 seconds), then
release Multifunction button.
LJ
2.Activate Bluetooth on your phone (See below for more details).
iPhone .
a.On your phone, open the Settings menu
b.Select Bluetooth. If Bluetooth is off. turn it on
The iPhone will search for new devices automat1ca!!y.
((<
Android phone .
ANC Call
Pair another phone
Multipoint technology enables you to pair headset to two phones Answer a call
at the same time and take calls from either: Press the Multifunct1on button or Volume + or Volume -
Pair headset to first phone per usual pairing procedure, then switch once
off headset. Then switch on headset again and enter pairing mode, Reject a call
enable Bluetooth function in second phone, find headset's Pairing
Name 'DYLAN' and pair to second phone per usual procedure. Press and hold the Multifunction button for about 2 seconds.
Switch off headset one more time. Then simply switch on headset. ANC On
without entering pairing mode (a short press until blue light comes End a call
on). The headset should automatically re-connect to the last Turn on the switch to dial down
connected phone (which is the second phone). Then find headset Press the Multifunction button once.
"DYLAN" in first phone's Bluetooth setting, select this to pair to first ANC Stays blue
phone. Both phones should now be paired to the headset. End current call and answer new call
When a new call rings during a cat!, press the Multifunction
button once to answer new call and end current call
ANC Off
l:J
simultaneously.
Turn on the switch to dial up On hold current call and answer new call
ANC Blue l ight is off When a new call rings during a call, Double the Multifunction
((, >)) button to hold current call and answer new call.
Basic operation-------
Music--------- s1atus indicator
Mute on/off Instruction LED status Voice prompts
(Need media player support)
Press the Volume- for about 2 seconds to mute on/off. Power on Stay blue about one second Power on
Music play I pause Power off Stay red about two second Power off
Switch between the earphone and phone Standby Blink blue once every 8 seconds
Press the volume button for about 2 seconds during a cal!, Press Mulufunction button once to play I pause music (Some Pairing Flashes red and blue alternately Pairing
the call will be switched to the mobile phone, redo this phones may require you to start a media player first)
Incoming call Flashes blue quickly Toot
operation again, the call will be switched to the earphone.
Track back/forward Battery low Blmk red Banery low
Redial the last call Charging Stays on red while charging
Press the Volume - for 2 seconds once to skip track backward, Stays on blue alter fully charged
Double-press the Multifunction button in standby or music mode
press Volume '+for 2 seconds once to skip track forward
The mobile phone will redial the last call number. Volume up/down Press the volume'+' to turn volume up
Press the volume- to turn volume down
Voice dial (Need phone support) Switch Music and Call Power on
Press and hold Multifunction button for about 2 seconds. The
In standby mode Press the Volume + and Volume - once. earphone says 'power on" and the LED flashes blue once.
When a call rings during a music playing, the music automatically
wait for phone prompt and then tell the phone to
pauses to allow you to answer or ignore the call. Once the call is
dial the name of a stored contact. Power off
ignored or ends, the music s resumed.
Press and hold Multifunctron button for about 5 seconds. The
earphone says 'power off' and the LED flashes red once.
Tips When the distance between the earphone and phone 1s beyo!ld
effective range, earphone disconnects with phoM Earphone will
power oft automat1ca!ly once rio active for 15 minutes.