5. The forces are acting on 1m length of the dam
shown in the figure. Determine the resultant force
acting on the dam. Calculate
Intersection of the resultant with the be
(R=137.12KN, «= 79.91°, x= 2.91m from 0)
6. A bracket is subjected to the
system of forces and the point
couples as shown. Find
rosultant of the system and tt
point of intorsection of its li
of action with:(a) line AB, (b)
Tine BC, (c) line CD.
7. Replace the system of forces and couples by a
single force and locate the point on the x-axis
through which the line of action of the resultant
passes. (R = 21.96N, 0= 45.8")
8. Find the resultant of coplanar force system given
below and locate the same on AB with consideration
‘of appliod moment of 4800 N-mm.
(R= 510.78N, 8 = 66.95")
of E
2m
20N,
amLesson Plan-2
force acting at origin and couple. (R = 596.98N, 0 =
Replace the force system shown in figure by a single i
2 I,
JM -273.8Nm clockwise)
0504)
The rectangular frame acted upon by @
general coplanar force system shown in
flgure determine the position and magnitude
‘of the resultant force acting on the
framework. What is the moment of the force
system about point 'O'? , (563N, 39.61%
0.4m)
aoe sock
Find the resultant of the force system acting on a body
ABC, shown in figure. Also find the points where the
resultant will cut the x and y axis. What is the distance
of resultant from 0? (R = -8i-6], m= 20k, 0 = 36.87")
|. Find the resultant of forces acting on the bell crank
ever as shown in figure. (x = 0.1412m to the left of O°)
00N
Teor Teint9. For the concrete dam shown in the figure to be safe
the resultant of the forces must pass through tho
middle-third af the base. Determine whether the dam
is safe, if P= 4500 kN and W = 13000 KN.
13758.82N, 8 = 70.9°)
40. A triangular plate is subjected to four coplanar
forces as shown in figure. Find the resultant 25™| 5px
2.72KN, 8 = 86.46°)
25m