Escolar Documentos
Profissional Documentos
Cultura Documentos
|
An Evolant
TRAINING
Enclosures (OSE) Solutions Product
|
Enclosures (OSE) are designed to manage the transition
|
mind. An adjustable interior backplate and removable
Compact size Preserves space in
COPPER CONNECTIVITY
cable entry plates accommodate top-only, bottom-only
crowded vaults
or top and bottom cable entries. The removable cable
Wall, 23-in rack and Flexibility entry plates also enable custom-entry options, including
T-slot mountable midspan and combination entry configurations.
|
excellent fiber management. Throughout the cabinet,
HARDWARE
routing guide plates and fiber management organize
and separate stored fiber and fiber entering the splice
trays. In addition, fiber may be routed through the four
|
horizontal pass-through ports located near the top and
CABLE ASSEMBLIES
bottom of the cabinet sides.
(continued)
|
CONNECTORS
|
CABLES
|
PRETERMINATED SYSTEMS
Universal Optical Splice Enclosure | Photo FOH181 Universal Optical Splice Enclosure | Photo FOH182
|
Each Universal OSE features a full range of capabilities To achieve each units maximum fiber density, Corning
for wall, 23-in rack with T-slot mounting. The T-slot Cable Systems recommends using the splice trays
mounting hardware allows for both horizontal and vertical designed for the Universal OSE. Each tray can
mounting and enables tight, side-by-side mounting accommodate up to 36 single-fiber splices or six
arrangements. In addition, Universal OSEs are especially mass fusion, 12-fiber ribbon splices.
OSE-LD and OSE-HD
well-suited for installations that require preconnectorized
cable assemblies or stubbed optical patch panels. In
these installations, the Universal OSE can actually
replace the rack-mounted splice unit typically required.
specifications |
Dimensions cm (in) (H x W x D) Shipping Weight kg (lb)
OSE Splice Trays 33.0 x 15.2 x 1.3 (13 x 6 x 0.5) 0.4 (0.8)
OSE-LD OSE-HD
No. Trays No. Splices No. Trays No. Splices
|
An Evolant
TRAINING
Enclosures (OSE) Solutions Product
ordering information |
|
SPLICE AND TEST EQUIPMENT
Universal Optical Splice Enclosures (OSE)
OSE - - - -
|1 |2 |3 |4 |5 |6 |7
|1 |5
Select OSE. Select top cable entry plate.
HD = High-Density 1 = Standard cable entry
|
LD = Low-Density 2 = Midspan access plate
COPPER CONNECTIVITY
See Note 2.
|2 |6
Select splice tray stacker type.
0 = Stacker for OSE splice trays (default) Select bottom cable entry plate.
2 = Stacker for 0.2-in tall splice trays Blank = Same as top plate
4 = Stacker for 0.4-in tall splice trays 1 = Standard cable entry
See Note 1. 2 = Midspan access plate
|
|3 |7
HARDWARE
Select workshelf. Select locking option.
W = With workshelf Blank = No lock
0 = Without workshelf L = Lockable (keyed lock)
|
|4
CABLE ASSEMBLIES
Notes:
1) Splice trays ordered separately.
2) Cable entry accessories ordered separately.
Select T-slot mounting.
T = With T-slot mounting kit
0 = Without T-slot mounting kit
Splice Trays
|
CONNECTORS
The OSE splice trays are designed to maximize density in the Universal OSE. Each tray accommodates up to 36 single-fiber
splices or six 12-fiber ribbon mass fusion splices. The maximum number of trays for the low- and high-density OSE is 12 and
24, respectively.
OSE - ST -
|
|1
CABLES
|1
|
1 = Heat-shrink fusion
2 = RTV fusion
3 = Mass fusion (ribbon)
4 = Mechanical
5 = Splice Pak Splice Protector
|
OSE Accessories
OSE-LD-MSPN-KIT OSE Low-Density Midspan Entry Plate (See SRP-003-644)