Escolar Documentos
Profissional Documentos
Cultura Documentos
evolucin aportando
las mejores soluciones
tecnolgicas para nuestros Descubre nuestras
clientes novedades
Discover
Since 1975 in continuous our news
development in order to
give the best technological
solutions to our clients
Cat. CG
sacipumps.com Rev. 01-12-2016 sacipumps.com
ndice General
General Index
1
Bombas Centrfugas
y Normalizadas EN 733
Serie K A A
4
Serie CB 6
Serie HK 7
Series Normalizada MN 8
Series CR 28
Series CRB 29
Series KONTRA 30
3
Centrfugas
Serie K
Aplicaciones: Applications:
Bombas centrfugas adecuadas para pequeos trasiegos de Centrifugal pumps suitable for small transfer work with
lquidos, llenado de depsitos y otros usos generales. Las liquids, filling tanks and other general uses. The double
de 2 turbinas son las ms adecuadas para su utilizacin para impeller versions are the most suitable to be used as a
equipos de presin. pressuring system.
Motor: Motor:
Asncrono hermtico de ventilacin externa, proteccin ter- Sealed asynchronous motor with external ventilation,
mo-amperimtrica incorporada y condensador en versin built-in thermal and amperimetric protection and capaci-
monofsica. Proteccin de seguridad en versin trifsica. tor in the single phase version. Safety protection in the
triple phase version.
TEMPERATURA DEL AGUA A BOMBEAR:
K-5/8/10/15/17/20/30/31/41 de -10 a + 50 C. TEMPERATURE OF THE WATHER TO BE PUMPED:
k-25/40/55/56/75/100/125/150 de -15 a + 110 C K-5/8/10/15/17/20/30/31/41 from-10 to+ 50 C.
K-25/40/55/56/75/100/125/150 from -15 to+ 110 C.
MXIMA TEMPERATURA AMBIENTE: +40 C
MAXIMUM AMBIENT TEMPERATURE: +40 C
MXIMA PRESIN DE TRABAJO:
K-5/8/10/15/20 6 kg./cm2 MAXIMUM WORKING PRESSURE:
K-17/25/31/41/56 8 kg./cm2 K-5/8/10/15/20 6 Kg./cm2
K-30/40 10 kg./cm2 K-17/25/31/41/56 8 Kg./cm2
K-55/75/100/125/150 12 kg./cm2 K-30/40 10 Kg./cm2
K-55/75/100/125/150 12 Kg./cm2
TIPOS:
K-5/8/31/41/56 Monoturbina TYPES:
K-15/20 2 Turbinas iguales K-5/8/31/41/56 Single impeller
K-10/17/25/30/40/55/75/100/125/150 2 Turbinas contrapuestas K-15/20 2 equal impellers
K- 10/17/25/30/40/55/75/100/125/150 2 counter-posed impellers
4
Centrfugas
Serie K
5
Centrfugas
Serie CB
Aplicaciones: Applications:
Bombas centrfugas biturbina, especialmente aptas para su Double impeller centrifugal pumps particularly suitable
uso en equipos de presin. for use in pressure units.
Aspiracin mxima 7 m.c.a., en caso de aspiraciones superio- Maximum suction 7 m.c.a.. In the case of suctions of
res a 4 m.c.a., instalar tubo de mayor dimetro al del orificio over 4 m.c.a., install a pipe with a wider diameter of the
de aspiracin. Suction hole .
Motor: Motor:
Cerrado, autoventilado, grado de proteccin IP44, versiones Sealed, self-ventilated, IP-44 protection, single phase
monofsicas con proteccin trmica y condensador incorpo- versions with built-in thermal protection and capacitor.
rados.
Aplicaciones: Applications:
Bomba centrfuga monoturbina especialmente diseada para A single impeller centrifugal pump especially designed
suministro de agua primaria o circuitos de recirculacin de agua for supplying primary water or hot water recirculation
caliente o aire acondicionado. circuits or Air Conditioning.
Motor: Motor:
De tipo asncrono, hermtico y ventilacin externa, proteccin Sealed asynchronous motor with external ventilation,
de seguridad incorporada grado IP-44 y aislamiento tipo F, a built-in IP-44 thermal protection and type F insulation.
partir de 7,5 CV voltaje habitual 400/690. Standard voltage 400/690 volts from 7.5 HP.
Aplicaciones: Applications:
Electrobombas Centrfugas Normalizadas cuya construccin es Standardised Centrifugal Electropumps built as per DIN
segn normas DIN-24255 - NFE44-III-UNI 7467. - 24255 - NFE44-III-UNI 7467.
Estas bombas son aptas para el bombeo de agua limpia y otros These pumps are suitable for pumping clean water and
lquidos qumicamente no agresivos. other liquids that are not chemically aggressive.
Posibilidad de montaje en cualquier posicin exceptuando la They may be assembled in any position except for posi-
que requiere el orificio de aspiracin hacia arriba. tions requiring the suction hole to point upwards.
Bomba ideal para su uso en riegos, equipos de presin, insta- An ideal pump for use in sprinkling, pressure units, air
laciones de climatizacin y otras instalaciones del sector civil, conditioning units and other installations in the civil, in-
industrial o agrario. dustrial or agricultural sectors.
Temperatura mxima del agua SERIE MN + 90 C Maximum water temperature in the MN SERIES + 90 C
Motor: Motor:
Motor de induccin, tipo cerrado y autoventilado, apto para tra- Induction motor, sealed and self-ventilated, suitable for
bajo continuo. Grado de proteccin IP-44 y aislamiento clase B. continuous work. IP-44 protection and class B insula-
tion.
Los motores de la Serie MN son todos a 2.850 r.p.m.
The MN Series motors are all 2,850 rpm..
A partir de 7,5 CV voltaje habitual 400/690 V (bajo demanda
230-400 V). STANDARD voltage FROM 7.5 HP IS 400/690 V (230-
400 V UNDER DEMAND).
8
Centrfugas normalizadas Monobloc
Serie MN
10
Normalizadas Monobloc 1.450 - 2.900 r.p.m.
Serie NKM-G - NKP-G
Aplicaciones:
Bombas centrfugas Monobloc Normalizadas segn Normativa
DIN 24255 (DIN EN733 actual).
Con acoplamiento para equipar un motor totalmente Norma-
lizado, ideales para una amplia gama de aplicaciones como
puedan ser: Applications:
- Circulacin de agua para circuitos de calefaccin y refrigera- Enbloc, centrifugal motor-driven pumps with coupling
cin. designed for a wide range of applications such as:
- Montajes en equipos de presin. - Supplyng water.
- Riegos. - The circulation of ot water for the central heating.
- Otras instalaciones del sector civil, industrial o agrario. - The circulation of cold water for air conditioning.
Pueden instalarse en posicin horizontal o vertical pero con el - The transfers of liquids in agriculture, industries.
motor siempre encima de la bomba. - The implementation of pumping systems.
P2 Q 0 6 12 18 24 30 36 42 48 54 60
MODELO NOMINAL m3/h
MODEL l/min 0 100 200 300 400 500 600 700 800 900 1000
HP KW
NKM-G 32-125.1 - 140 - 0.25 A A 0,33 0,25 6,2 5,8 4,2
NKM-G 32-125 - 142 - 0.37 A A 0,5 0,37 7 6,75 5,85 4,2
NKM-G 32-160.1 - 169 - 0.37 A A 0,5 0,37 9,6 8,3 5,3
NKM-G 32-160 - 169 - 0.55 A A 0,75 0,55 9,4 9 8,8 5,6
NKM-G 32-200.1 - 200 - 0.55 A A 0,75 0,55 13,4 11,5 7,2
NKM-G 32-200 - 200 - 0.75 A A 1 0,75 13 12,5 11,1 8,45
NKM-G 32-200 - 219 - 1.1 A A 1,5 1,1 16 15,4 14,3 12,2
NKM-G 40-125 - 115 - 0.25 A A 0,33 0,25 4,2 4,1 3,7 3 2,1
NKM-G 40-125 - 130 - 0.37 A A 0,5 0,37 5,4 5,3 5 4,4 3,5
NKM-G 40-125 - 142 - 0.55 A A 0,75 0,55 6,6 6,5 6,2 5,7 4,8
NKM-G 40-160 - 153 - 0.55 A A 0,75 0,55 7,6 7,7 7,6 6,7 5,5
NKM-G 40-160 - 166 - 0.75 A A 1 0,75 9,2 9,2 9 8,4 7,4 5,7
NKM-G 40-200 - 200 - 1.1 A A 1,5 1,1 12,6 12,6 12,3 11,2 9,7 7,7
NKM-G 40-200 - 219 - 1.5 A A 2 1,5 15,6 15,6 15,3 14,7 13,4 11,8 9,8
NKM-G 40-250 - 245 - 2.2 A A 3 2,2 20,6 20,5 20,1 19,2 17,8 16
NKM-G 40-250 - 260 - 3 A A 4 3 23,3 23,1 22,8 22,2 20,8 19
NKM-G 50-125 - 130 - 0.55 A A 0,75 0,55 5,5 5,2 5 4,7 4,3 3,9 3,3 2,6
NKM-G 50-125 - 141 - 0.75 A A 1 0,75 6,5 6,3 6,1 5,8 5,5 5 4,5 3,9
NKM-G 50-160 - 161 - 1.1 A A 1,5 1,1 8,7 8,7 8,5 8,2 7,8 7,3 6,7 5,7
NKM-G 50-160 - 177 - 1.5 A A 2 1,5 10,8 10,8 10,7 10,5 10,2 9,8 9,2 8,3
NKM-G 50-200 - 210 - 2.2 A A 3 2,2 15,3 15,3 15,2 14,8 14 13,3 12,1 10,8 9,4
NKM-G 50-200 - 219 - 3 A A 4 3 16,8 16,8 16,5 16,1 15,5 14,6 13,6 12,4 10,9
NKM-G 50-250 - 263 - 4 A A 5,5 4 23,8 24 23,8 23,4 22,7 21,6 20,4 19 17,1
NKM-G 65-125 - 130 - 0.75 A A 1 0,75 5,1 4,9 4,8 4,75 4,7 4,4 4,2 3,8 3,4 3
NKM-G 65-125 - 144 - 1.1 A A 1,5 1,1 6,5 6,4 6,4 6,3 6,2 6 5,75 5,5 5,1 4,7
NKM-G 65-160 - 153 - 1.1 A A 1,5 1,1 7,4 7,4 7,3 7,15 6,9 6,65 6,25 5,8 5,3 4,4
NKM-G 65-160 - 165 - 1.5 A A 2 1,5 H 8,9 8,8 8,7 8,6 8,3 8 7,6 7,15 6,6
(m)
NKM-G 65-160 - 177 - 2.2 A A 3 2,2 10,5 10,4 10,3 10,2 9,9 9,6 9,2 8,8
NKM-G 65-200 - 210 - 3 A A 4 3 15,3 15,4 15,3 15 14,6 14,1 13,5 12,9
NKM-G 65-200 - 219 - 4 A A 5,5 4 17 17,2 17,2 17,1 16,8 16,5 16,2 15,7
NKM-G 65-250 - 263 - 5.5 A A 7,5 5,5 24,1 23,8 23,6 23,3 22,8 22,3 21,5 20,8
NKM-G 65-315 - 279 - 7.5 A A 10 7,5 27 26 25,5 25 24,5
NKM-G 65-315 - 309 - 11 A A 15 11 34,2 33,2 33 32,5 32
NKM-G 80-160 - 153 - 1.5 A A 2 1,5 6,5 6,35 6,3 6,2 5,95 5,75 5,5
NKM-G 80-160 - 163 - 2.2 A A 3 2,2 8,65 8,5 8,45 8,3 8,15 7,9 7,7
NKM-G 80-160 - 177 - 3 A A 4 3 10,2 10,2 10,1 10 9,9 9,75 9,7
NKM-G 80-200 - 200 - 4 A A 5,5 4 13,2 13,2 13,2 13,1 12,9
NKM-G 80-200 - 222 - 5.5 A A 7,5 5,5 16,5 16,6 16,5 16,4 16,2
NKM-G 80-250 - 240 - 7.5 A A 10 7,5 20,5 21 21 21 20,7
NKM-G 80-250 - 270 - 11 A A 15 11 25,5 25,5 25,5 25,5 25,1
NKM-G 80-315 - 305 - 15 A A 20 15 32,9 33,1 33
NKM-G 80-315 - 320 - 18.5 A A 25 18,5 36,8 37,1 37
NKM-G 80-315 - 334 - 22 A A 30 22 41 41,4 41,4
NKM-G 100-200 - 200 - 5.5 A A 7,5 5,5 12,7 12,6
NKM-G 100-200 - 214 - 7.5 A A 10 7,5 15,6 15,4
NKM-G 100-250 - 250 - 11 A A 15 11 21 21,5
NKM-G 100-250 - 270 - 15 A A 20 15 25,5 25,5
NKM-G 100-315 - 300 - 18.5 A A 25 18,5 32
NKM-G 100-315 - 316 - 22 A A 30 22 36
NKM-G 125-250 - 243 - 15 A A 20 15 19,5
NKM-G 125-250 - 256 - 18.5 A A 25 18,5 22
NKM-G 125-250 - 266 - 22 A A 30 22 24,6
NKM-G 150-200 - 218 - 11 A A 15 11 13,2
12
Tablas de seleccin rpida / Numerical selection table
Serie NKM-G
66 72 78 84 90 102 114 120 150 180 210 240 270 300 330 360 390 420
1100 1200 1300 1400 1500 1700 1900 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000
A
1.450 r.p.m.
2,5
4,2 3,75
6
8,2 7,4 6,6
12,2 11,3
15,1 14,3 13,6 12,6
19,7 18,6 17,3
23,6 22,7 21,5 20,2 19
31,5 30,7 29,8 29 28 25 21,7
5,3 5 4,7 4,5 4,25 3,65 3
7,4 7,2 6,9 6,65 6,3 5,7 4,9 4,6
9,5 9,25 9 8,8 8,6 7,9 7,2 6,7
12,7 12,4 12 11,7 11,3 10,4 9,3 8,7
16,1 16 15,7 15,4 15 14,3 13,3 12,7
20,5 20 19,8 19,5 19 18 16,7 16
25 25 24,6 24,2 24 23 21,5 21
32,9 32,8 32,4 32 31,6 30,5 29,5 28,9 24
36,9 36,8 36,5 36,5 36,1 35,5 34,5 34 29,5
41,2 41 40,8 40,6 40,5 39,8 39 38,5 34,8 29
12,6 12,5 12,5 12,4 12,3 12 11,5 11,4 10,1 8,5
15,4 15,3 15,2 15,1 15 14,7 14,5 14,3 13,3 11,6 9,8
21,5 21,5 21,4 21,2 21 20,9 20 19,8 18 16
25,5 25,5 25,3 25,1 25,1 25 24,5 24 22,5 20,5 17,5
31,5 31,4 31 30,5 28,8 26 23
35,5 35,2 35 34,6 33,2 31 28 24
19,5 19,4 19,3 19,2 18,7 17,8 16,8 15,5 14,1 12,5 10,9
22 21,9 21,8 21,7 21,4 20,5 19,5 18,5 17,2 15,6 14 12
24,4 24,2 24,1 24 23,5 22,9 22 21 19,8 18,5 16,7 15
13,1 13 13 12,8 12,5 12,1 11,5 11 10,4 9,7 9 8 7
13
Normalizadas Monobloc 2.900 r.p.m.
Serie NKP-G
P2 Q 0 6 12 18 24 30 36 42 48 54 60
MODELO NOMINAL m3/h
MODEL l/min 0 100 200 300 400 500 600 700 800 900 1000
HP KW
NKP-G 32-125.1 - 102 - 0.75 A A 1 0,75 13 12,5 11 8
NKP-G 32-125.1 - 115 - 1.1 A A 1,5 1,1 17,2 17 15 12,5
NKP-G 32-125.1 - 125 - 1.5 A A 2 1,5 21 20,8 19 16,8
NKP-G 32-125.1 - 140 - 2.2 A A 3 2,2 27 26,9 25,9 23 19,5
NKP-G 32-125 - 110 - 1.1 A A 1,5 1,1 15,8 15,4 14,5 12,9 9,9
NKP-G 32-125 - 120 - 1.5 A A 2 1,5 19,4 19 18,2 16,8 14,5
NKP-G 32-125 - 130 - 2.2 A A 3 2,2 23,7 23,4 23 21,8 19,8 16,8
NKP-G 32-125 - 142 - 3 A A 4 3 28,6 28,2 27,6 26,5 24,6 21,8 17,9
NKP-G 32-160.1 - 155 - 2.2 A A 3 2,2 32 31 27 22
NKP-G 32-160.1 - 166 - 3 A A 4 3 38 36 33 28
NKP-G 32-160 - 151 - 3 A A 4 3 30,5 30 29 27 24 19,5
NKP-G 32-160 - 163 - 4 A A 5,5 4 36 36 35 33,5 30,5 27 22
NKP-G 32-160 - 177 - 5.5 A A 7,5 5,5 43,5 43,2 42,6 41,5 39 36 31,5 25,5
NKP-G 32-200.1 - 188 - 4 A A 5,5 4 51 48 44 37
NKP-G 32-200.1 - 205 - 5.5 A A 7,5 5,5 57 56 52 46 35
NKP-G 32-200 - 190 - 5.5 A A 7,5 5,5 47 46,5 45 43 40 35 29
NKP-G 32-200 - 210 - 7.5 A A 10 7,5 58,5 58 57 56 53 49 44
NKP-G 40-125 - 107 - 1.5 A A 2 1,5 14,7 14,5 14,3 13,8 13 11,8 10,5 8,6 7
NKP-G 40-125 - 120 - 2.2 A A 3 2,2 19 18,7 18,4 17,8 17 15,9 14,6 13 11
NKP-G 40-125 - 130 - 3 A A 4 3 22,8 22,5 22,3 22 21,2 20,2 19 17,4 15,5 13,5
NKP-G 40-125 - 139 - 4 A A 5,5 4 26,4 26,2 26 25,6 25 24 23 21,5 19,5 17,5 15
NKP-G 40-160 - 158 - 5.5 A A 7,5 5,5 34 34 33,5 32,5 31 29,5 27 24
NKP-G 40-160 - 172 - 7.5 A A 10 7,5 41 41 41 40 39 37,5 35,5 33 30
NKP-G 40-200 - 210 - 11 A A 15 11 57 57,5 58 58 57,5 57 55 53 50 47 43,5
NKP-G 40-250 - 230 - 15 A A 20 15 72,5 72,5 72 70 68 66 62,5 60 56
H
NKP-G 40-250 - 245 - 18.5 A A 25 18,5 (m) 83 83 82,5 81,5 80 77 74 71,5 67,5
NKP-G 40-250 - 260 - 22 A A 30 22 96 95 94,5 93,5 92 90 87,5 84 81
NKP-G 50-125 - 115 - 3 A A 4 3 17 16,5 16 15,5 15 14,5 13,7 13
NKP-G 50-125 - 125 - 4 A A 5,5 4 20,5 20 19,5 19,1 18,5 18 17,5 16,5
NKP-G 50-125 - 135 - 5.5 A A 7,5 5,5 24 23,6 23,5 23,2 22,8 22,2 21,5 21
NKP-G 50-125 - 144 - 7.5 A A 10 7,5 28 27,8 27,5 27,3 27 26,5 25,8 25,5
NKP-G 50-160 - 153 - 7.5 A A 10 7,5 32 32,5 32,4 32 31,5 31 30,5 29,5
NKP-G 50-160 - 169 - 11 A A 15 11 39,5 40 39,8 39,5 39 38,5 38
NKP-G 50-200 - 200 - 15 A A 20 15 55 56 55,5 54 53,5 52 51
NKP-G 50-200 - 210 - 18.5 A A 25 18,5 61,5 62 62 61,5 60,5 59 58
NKP-G 50-200 - 219 - 22 A A 30 22 67,5 68 67,5 67 66 65,5 64
NKP-G 50-250 - 230 - 22 A A 30 22 73,5 75 74,5 73,8 73,5 71 68,5
NKP-G 50-250 - 257 - 30 A A 40 30 92,5 94 94 93,6 93,5 91 89
NKP-G 65-125 - 120/110 - 4 A A 5,5 4 16 15 14,6 14,2 13,7 13,3
NKP-G 65-125 - 127 - 5.5 A A 7,5 5,5 19,5 19 18,9 18,7 18,4 18,1
NKP-G 65-125 - 137 - 7.5 A A 10 7,5 23,5 23,1 23 22,8 22,6 22,5
NKP-G 65-160 - 157 - 11 A A 15 11 32,5 32,2 32 31,8
NKP-G 65-160 - 173 - 15 A A 20 15 40 40,2 40 39,8
NKP-G 65-200 - 190 - 18.5 A A 25 18,5 51,5 52 52 51,5
NKP-G 65-200 - 200 - 22 A A 30 22 56,5 58 58 57,5
NKP-G 65-200 - 219 - 30 A A 40 30 68,5 70 70 70
NKP-G 80-160 - 147/127 - 11 A A 15 11 24
NKP-G 80-160 - 153 - 15 A A 20 15 30,5
NKP-G 80-160 - 163 - 18.5 A A 25 18,5 35,5
NKP-G 80-160 - 169 - 22 A A 30 22 38,5
NKP-G 80-200 - 190 - 30 A A 40 30 48
14
Tablas de seleccin rpida / Numerical selection table
Serie NKP-G
66 72 78 84 90 102 114 120 150 180 210 240 270 300 330 360 390 420
1100 1200 1300 1400 1500 1700 1900 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000
A
2.900 r.p.m.
26,5
39
51,5
63,5 58,5
76,5 71,5
12 11 10 9
15,8 14,8 14 12,5 11,5
20 19,1 18,5 17,5 16,5 13,4
24,5 23,5 23 21,5 20,5 18 15,5
28,5 27,5 26 25 23,5
37,2 36,5 35 34 32,5
49 47,5 45,5 43 41
56,5 55 53 51 48,5 43
62,5 61 59,5 57 55 50
67 65 62,5 60 57 49
87,5 86 83 81 78 72
12,8 12,3 12 11,4 10 8,5 8
17,5 17,2 16,9 16,5 15,8 14,5 13 12
22 21,6 21,1 20,7 20,2 19 17,5 14,8 12
31,3 30,2 30 29,2 28,7 27 24,8 23,6
39,5 39 38,5 38,2 37,5 36 34,5 33,5 26,9
50,5 50 49 48,5 47,5 45 42,5 41
57 56,5 56 55 54,5 53 51 49
69,5 69 68,8 68,5 67,5 66 64 63 57
22 21,4 20,4 20 17,4 14,8 12
29 28,4 27,5 27 24,5 21,3 18,3
34,3 33,6 32,6 32,3 29,8 26,8 23,6 20
37,2 36,8 36 35,8 33,5 30,8 27,5 24
48,5 48,2 47,5 47 44,7 41 36 29
15
Normalizadas Sobre Bancada o Eje Libre a 2.900-1.450 r.p.m.
Serie KDN
Aplicaciones:
Bombas centrfugas a eje libre o sobre bancada normalizadas
segn Normativa DIN 24255 (DIN EN733 actual).
Ideales para una amplia gama de aplicaciones como puedan ser:
- Circulacin de agua para circuitos de calefaccin y refrigeracin.
- Montajes en equipos de presin. Applications:
- Riegos. Bare shaft, Enbloc, centrifugal motor-driven pumps
- Otras instalaciones del sector civil, industrial o agrario. with coupling designed for a wide range of applications
Pueden ser acopladas con un acoplamiento elstico a un motor such as:
de 1.450 - 2.900 r.p.m. y montada sobre una bancada rgida. - Supplyng water.
Bajo demanda las turbinas pueden ser en bronce. - The circulation of ot water for the central heating.
- The circulation of cold water for air conditioning.
Caractersticas Constructivas: - The transfers of liquids in agriculture, industries.
Cuerpo bomba, tapa porta sello mecnico, soporte en fundicin - The implementation of pumping systems.
de hierro. Turbina en fundicin de hierro cerrada y equilibrada di-
nmicamente con compensacin del esfuerzo axial. Eje bomba Constructional features of the pump:
en Acero Inoxidable AISI 304 soportado por dos cojinetes de Single-stage, cast iron spiral body made to DIN-EN 733
esferas ampliamente dimensionadas, engrasadas de por vida y (formely DIN 24255), cast iron support, flanges in accor-
alojadas en una cmara en el interior del soporte. dance with DIN 2533 and DIN 2532 for DN 200. Impe-
Cierre mecnico normalizado segn la DIN 24960 en carbn - ller in cast iron, encased and dynamically balanced with
carburo de silicio con juntas tricas EPDM. compensation of the axial thrust by means of balancing
Bajo demanda empaquetadura o estopada con anillos hi- holes, operating (on request) with interchangeable wear
drulicos de lubricacin en lugar de sello mecnico con- rings. AISI 304 stainless steel pump shaft. Standardised
vencional. mechanical seal made to DIN 24960 in carbon/silicium
carbide with Orings in EPDM. Paccking with lubricating
Motor: hydraulic ring and stuffing box in two easly removable
Motor asncrono, cerrado de ventilacin externa de forma cons- parts, available on request.
tructiva B3. Aislamiento clase F, con grado de proteccin IP55
y tropicalizado. Todos los motores son multifrecuencia y multi- Constructional features of the motor:
tensin. Closed, asynchronous motor with external ventilation,
A partir de 15CV (Mec 160) todos los motores incorporan de construction type B3 for 2 poles and 4 poles. The rotor
serie engrasador de cojinetes y sonda de temperatura. Los mo- is monted on extra large ball bearings to guarantee low
tores de esta serie pueden ser a 1.450 r.p.m. o 2.900 r.p.m.. noise running and durability. We recommend using
overload protection for the motor, in accordance with
Campo de temperatura de lquido bombeado: de -10 C a current norms. In the case of liquids denser than water,
+ 140 C. the motors must be proportionally more powerfull.
ip-55 protection insulation F.
Q 0 3 6 12 18 24 30 36 42 48 54
MODELO / MODEL m3/h
KDN 32-125 / 135 24,9 - 3 24 - 3 22,1 - 4 21,5 - 4 18,5 - 5,5 14,7 - 5,5
KDN 32-125 / 142 27,8 - 4 27 - 4 26,1 - 4 24,5 - 5,5 21,7 - 5,5 18 - 5,5
KDN 32-160 / 153 30,4 - 4 29,5 - 4 27,7 - 5,5 25,8 - 5,5 21,2 - 7,5
KDN 32-160 / 161 34 - 5,5 33 - 5,5 31,7 - 5,5 29,1 - 7,5 25,5 - 7,5
KDN 32-160 / 169 38 - 5,5 37,3 - 5,5 36 - 7,5 33,6 - 7,5 35,7 - 7,5 26,5 - 10
KDN 32-160 / 177 41,8 - 5,5 41,5 - 5,5 40,5 - 7,5 38,4 - 7,5 35,3 - 10 31,4 - 10
KDN 32-200.1 / 200 51,8 - 5,5 50 - 5,5 46,5 - 7,5 40,5 - 7,5 31 - 7,5
KDN 32-200 / 180 39 - 5,5 38,5 - 5,5 36,5 - 7,5 32,5 - 7,5 28 - 7,5
Q 0 3 6 12 18 24 30 36 42 48 54 60
MODELO / MODEL m3/h
l/min 0 50 100 200 300 400 500 600 700 800 900 1000
KDN 40-125 / 115 16,8 - 3 13,3 - 3 15,6 - 3 15 - 3 14,3 - 4 13,2 - 4 12,6 - 4 9,8 - 4
KDN 40-125 / 120 18,5 - 3 18 - 3 17,5 - 3 17- 4 16 - 4 15 - 4 13,5 - 4 11,8 - 5,5
KDN 40-125 / 125 20,4 - 4 20 - 4 19,5 - 4 19 - 4 18 - 4 16,7 - 5,5 15,3 - 5,5 13,5 - 5,5
KDN 40-125 / 130 22 - 4 21,8 - 4 21,5 - 4 21 - 4 20 - 5,5 19 - 5,5 17,5 - 5,5 15,7 - 5,5 14 - 7,5
KDN 40-125 / 135 24,1 - 4 24 - 4 23,9 - 4 23,4 - 5,5 22,5 - 5,5 21,5 - 7,5 20 - 7,5 18,3 - 7,5 16,4 - 7,5
KDN 40-125 / 142 26,8 - 5,5 26,6 - 5,5 26,4 - 5,5 26 - 5,5 25,3 - 7,5 24,4 - 7,5 23 - 7,5 21,4 - 7,5 19,4 - 7,5 17 - 7,5
KDN 40-160 / 137 24 - 4 24 - 4 23 - 4 22 - 5,5 20,5 - 5,5 18 - 7,5 15 - 7,5
KDN 40-160 / 145 27,5 - 5,5 27,5 - 5,5 27 - 5,5 25,9 - 5,5 24,2 - 7,5 22,1 - 7,5 19,5 - 7,5
KDN 40-160 / 153 31- 7,5 31 - 7,5 30,5 - 7,5 29,5 - 7,5 28 - 7,5 26,5 - 7,5 24 - 10 21 - 10
KDN 40-160 / 161 34,5 - 7,5 35 - 7,5 34,5 - 7,5 33,9 - 7,5 32 - 10 30,5 - 10 28,5 - 10 25,8 - 10 22,5 - 10
KDN 40-160 / 169 38,5 - 7,5 39 - 7,5 38,5 - 7,5 38 - 10 37 - 10 35 - 10 33,5 - 15 31 - 15 28 - 15
KDN 40-160 / 177 42,5 - 10 43 - 10 42,5 - 10 42 - 10 41,5 - 15 40 - 15 38,5 - 15 35 - 15 33 - 15
KDN 40-200 / 170 33,5 - 7,5 34,5 - 7,5 33,5 - 7,5 32 - 7,5 30 - 7,5 26,5 - 10 22,5 - 10
KDN 40-200 / 180 38,5 - 7,5 39,5 - 7,5 38,5 - 7,5 37 - 10 35 - 10 32,5 - 10 29 - 10 25 - 10
KDN 40-200 / 190 43,5 - 10 44,5 - 10 44 - 10 43 - 10 41 - 10 38 - 15 35 - 15 31,5 - 15 27 - 15
KDN 40-200 / 200 48,5 - 10 50 - 10 49,5 - 10 48,5 - 15 46,5 - 15 44 - 15 41,5 - 15 38,5 - 15 34,5 - 15
KDN 40-200 / 210 54 - 15 55,5 - 15 55,5 - 15 54,5 - 15 53 - 15 51 - 15 48,5 - 15 46 - 20 42,5 - 20
KDN 40-200 / 219 60 - 15 61 - 15 61 - 15 60,5 - 15 59 - 15 57 - 20 55 - 20 62,5 - 20 49,5 - 20
KDN 40-250 / 220 63 - 15 63 - 15 62,5 - 15 61 - 15 59 - 15 57 - 20 55 - 20 52 - 20 48 - 20
KDN 40-250 / 230 69,5 - 15 69,5 - 15 68,5 - 15 68 - 15 66 - 20 63,5 - 20 61 - 25 58 - 25 55 - 25
KDN 40-250 / 240 76 - 20 76 - 20 76 - 20 75 - 20 73 - 20 70,5 - 25 68 - 25 65 - 25 62 - 30
KDN 40-250 / 250 83 - 20 83 - 20 82,5 - 20 81,5 - 20 80 - 25 78 - 25 75,5 - 30 72,5 - 30 69 - 30
KDN 40-250 / 260 91 - 25 90,5 - 25 90 - 25 89,5 - 25 88,5 - 25 86,5 - 30 84 - 30 81 - 30 78 - 40
KDN 50-125 / 115 H 16,8 - 4 16 - 4 15,5 - 4 15 - 4 14,3 - 5,5 13,6 - 5,5 13 - 5,5
(m)
KDN 50-125 / 120 18,1 - 5,5 17,5 - 5,5 17 - 5,5 16,5 - 5,5 16 - 5,5 15,3 - 7,5 14,7 - 7,5
KDN 50-125 / 125 19,8 - 5,5 19,4 - 5,5 19 - 5,5 18,5 - 5,5 17,9 - 5,5 17,4 - 7,5 16,6 - 7,5
KDN 50-125 / 130 21,5 - 7,5 21,1 - 7,5 20,8 - 7,5 20,5 - 7,5 19,8 - 7,5 19,2 - 7,5 18,5 - 7,5
KDN 50-125 / 135 23,2 - 7,5 23 - 7,5 22,6 - 7,5 22,3 - 7,5 21,8 - 7,5 21,2 - 10 20,6 - 10
KDN 50-125 / 139 24,7 - 7,5 24,5 - 7,5 24,3 - 7,5 24 - 7,5 23,5 - 7,5 23 - 10 22,4 - 10
KDN 50-125 / 144 25,9 - 10 26,5 - 10 26,4 - 10 26,1 - 10 25,6 - 10 25,1 - 10 24,5 - 10
KDN 50-160 / 137 24 - 7,5 24 - 7,5 24 - 7,5 23,5 - 7,5 23 - 7,5 22,5 - 7,5 21 - 7,5
KDN 50-160 / 145 27,5 - 7,5 27,5 - 7,5 27,5 - 7,5 27 - 7,5 26 - 7,5 25,5 - 7,5 25 - 10
KDN 50-160 / 153 30,5 - 10 31 - 10 31 - 10 30,5 - 10 30 - 10 29,5 - 10 28,5 - 10
KDN 50-160 / 161 32 - 10 34,5 - 10 34,5 - 10 34 - 10 33,5 - 15 33,5 - 15 32,5 - 15
KDN 50-160 / 169 37,5 - 15 38,5 - 15 38,5 - 15 38 - 15 37,5 - 15 37,5 - 15 36,5 - 15
KDN 50-160 / 177 41,5 - 15 42,5 - 15 42,5 - 15 42 - 15 42,8 - 15 41,5 - 15 41 - 15
KDN 50-200 / 170 38 - 10 38 - 10 37,5 - 10 37 - 10 35 - 10 34 - 15 32 - 15
KDN 50-200 / 180 42,5 - 10 43 - 10 42,5 - 10 41,5 - 15 40,5 - 15 39,5 - 15 38 - 15
KDN 50-200 / 190 47 - 15 48 - 15 47,5 - 15 47 - 15 46 - 15 44,5 - 15 43,5 - 15
KDN 50-200 / 200 52,5 - 15 53,5 - 15 53 - 15 52,5 - 15 51,5 - 15 50,5 - 20 49 - 20
KDN 50-200 / 210 58,5 - 15 59 - 15 59 - 15 58,5 - 15 57,5 - 20 56,5 - 20 55,5 - 20
KDN 50-200 / 219 64 - 20 65 - 20 64,5 - 20 64 - 20 63,5 - 20 52,5 - 20 61,5 - 25
KDN 50-250 / 220 64 - 20 65 - 20 64,5 - 20 63 - 20 62 - 20 61 - 20 59 - 25
KDN 50-250 / 230 69 - 20 72 - 20 71 - 20 70 - 20 69 - 25 68 - 25 66 - 25
KDN 50-250 / 240 76 - 25 78 - 25 78 - 25 77 - 25 76 - 25 74,5 - 30 73 - 30
KDN 50-250 / 250 84 - 25 85,5 - 25 85 - 25 84,5 - 25 83,5 - 30 84 - 40 80,5 - 40
KDN 50-250 / 263 92 - 30 94 - 30 94 - 30 93,5 - 30 92,5 - 30 91,5 - 40 90 - 40
N. negro: Altura m.c.a. - N. verde: Potencia Nominal en CV
N black: Height w.c.m. - N Green: Nominal Power HP
18
Tablas de seleccin rpida / Numerical selection table
Serie KDN
66 72 78 84 90 102 114 120 150 180 210 240 270 300 330 360 390 420
1100 1200 1300 1400 1500 1700 1900 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000
A
2.900 r.p.m.
30 - 15
38 - 20
46 - 20 40 - 20
51 - 25
58,5 - 30
66 - 30
74 - 40
12,2 - 5,5 11,5 - 5,5 10,4 - 5,5 9 - 5,5
14 - 7,5 13,2 - 7,5 12 - 7,5 11,2 - 7,5 10 - 7,5
16 - 7,5 15,1 - 7,5 14 - 7,5 13 - 7,5 11,8 - 10
17,8 - 7,5 17 - 10 16,5 - 10 15,2 - 10 14 - 10
19,9 - 10 19,3 - 10 18,4 - 10 17,5 - 10 16,3 - 10 13,7 - 10
21,6 - 10 20,8 - 10 20 - 10 19,2 - 10 18 - 10 15,5 - 15
24 - 10 23,2 - 10 22,3 - 15 21,5 - 15 20,5 - 15 17,8 - 15 15 - 15
20,3 - 10 19 - 10 18 - 10 16,8 - 10 15 - 10
23,8 - 10 23 - 10 21,5 - 10 20,5 - 15 19 - 15
27,7 - 15 26,5 - 15 25,5 - 15 24,5 - 15 23 - 15
31,8 - 15 31 - 15 29,8 - 15 28,5 - 15 27,5 - 15
36 - 15 35,5 - 15 34,2 - 15 33 - 20 31,5 - 20 29 - 20
40,5 - 20 39,5 - 20 38,8 - 20 38 - 20 36,7 - 20 33,5 - 20
30 - 15 27 - 15 25 - 15
36 - 15 34 - 15 32 - 20 29 - 20
42 - 20 40 - 20 38 - 20 35,5 - 20 33 - 20
47,5 - 20 46 - 20 44,5 - 25 42 - 25 40 - 25
54 - 25 52,5 - 25 51 - 25 49 - 25 46,5 - 30 41,5 - 30
60 - 25 58,5 - 25 57 - 30 55 - 30 53 - 30 48,5 - 40
57,5 - 25 55 - 25 53 - 25 50 - 30 46,5 - 30 36 - 30
64 - 30 62 - 30 60 - 30 57 - 30 54 - 40 45 - 40
71,5 - 30 69 - 40 67 - 40 65 - 40 62 - 40 55 - 40
78,5 - 40 77 - 40 75 - 40 72,5 - 40 70 - 40 64 - 50
88,5 - 40 86,5 - 40 84,5 - 50 82,5 - 50 82 - 50 75 - 50 61 - 50
Q 0 3 6 12 18 24 30 36 42 48 54 60
MODELO / MODEL m3/h
l/min 0 50 100 200 300 400 500 600 700 800 900 1000
KDN 65-125 / 120 / 110 16 - 7,5 14,4 - 7,5 14 - 7,5 13,6 - 7,5
KDN 65-125 / 120 17,8 - 7,5 16 - 7,5 15,6 - 7,5 15,3 - 7,5
KDN 65-125 / 125 19,4 - 7,5 17,8 - 7,5 17,5 - 7,5 17,1 - 7,5
KDN 65-125 / 130 21 - 7,5 19,6 - 7,5 19,5 - 7,5 19,1 - 7,5
KDN 65-125 / 135 22,6 - 10 21,8 - 10 21,5 - 10 21,3 - 10
KDN 65-125 / 140 24 - 10 23,6 - 10 23,5 - 10 23,4 - 10
KDN 65-125 / 144 25,6 - 15 25,6 - 15 25,5 - 15 25,3 - 15
KDN 65-160 / 137 23 - 10 22,7 - 10 22,5 - 10 22 - 10
KDN 65-160 / 145 26 - 10 26 - 10 25,5 - 10 25 - 10
KDN 65-160 / 153 29 - 15 29,5 - 15 29 - 15 28,7 - 15
KDN 65-160 / 161 32,5 - 15 33 - 15 32,7 - 15 32,5 - 15
KDN 65-160 / 169 36,5 - 15 36,6 - 15 36,5 - 15 36,4 - 15
KDN 65-160 / 177 40 - 20 40,5 - 20 40,5 - 20 40,3 - 20
KDN 65-200 / 170 37 - 15 38,5 - 15 38 - 15 37,5 - 15
KDN 65-200 / 180 42 - 15 43 - 15 43 - 15 42,5 - 15
KDN 65-200 / 190 48 - 20 49,5 - 20 49 - 20 48,5 - 20
KDN 65-200 / 200 53 - 20 54,5 - 20 54,5 - 20 54,5 - 20
KDN 65-200 / 210 59 - 25 60,5 - 25 60,5 - 25 60 - 25
KDN 65-200 / 219 65 - 25 66,5 - 25 66,5 - 25 66 - 25
KDN 65-250 / 220 63 - 25 63 - 25 62,5 - 25 62 - 25
KDN 65-250 / 230 69,5 - 30 69,5 - 30 69 - 30 68,5 - 30
KDN 65-250 / 240 76 - 40 76 - 40 75,5 - 40 75 - 40
KDN 65-250 / 250 83 - 40 83 - 40 82,5 - 40 82,5 - 40
KDN 65-250 / 263 93 - 40 92,5 - 40 92 - 40 92 - 40
KDN 65-315 / 260 94 - 30
KDN 65-315 / 275 H 105 - 30
KDN 65-315 / 290 (m) 117 - 30
KDN 65-315 / 305 129 - 40
KDN 65-315 / 320 143 - 50
KDN 80-160 / 147 / 127 23 - 15
KDN 80-160 / 153 / 136 25,5 - 15
KDN 80-160 / 153 29,2 - 20
KDN 80-160 / 161 32,8 - 20
KDN 80-160 / 169 36,5 - 25
KDN 80-160 / 177 40 - 25
KDN 80-200 / 170 36,5 - 25
KDN 80-200 / 180 41 - 25
KDN 80-200 / 190 45,5 - 30
KDN 80-200 / 200 51 - 40
KDN 80-200 / 210 56 - 40
KDN 80-200 / 222 63,5 - 50
KDN 80-250 / 220 62 - 50
KDN 80-250 / 230 68 - 50
KDN 80-250 / 240 75,5 - 60
KDN 80-250 / 250 82,5 - 60
KDN 80-250 / 260 90 - 75
KDN 80-250 / 270 98 - 75
KDN 80-315 / 275 104 - 40
KDN 80-315 / 290 116 - 40
KDN 80-315 / 305 124 - 50
KDN 80-315 / 320 141 - 60
KDN 80-315 / 334 153 - 75
N. negro: Altura m.c.a. - N. verde: Potencia Nominal en CV N black: Height w.c.m. - N Green: Nominal Power HP
20
Tablas de seleccin rpida / Numerical selection table
Serie KDN
66 72 78 84 90 102 114 120 150 180 210 240 270 300 330 360 390 420
1100 1200 1300 1400 1500 1700 1900 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000
13,1 - 7,5 12,8 - 7,5 12,2 - 7,5 11,9 - 7,5 11,4 - 7,5 10,2 - 7,5
14,9 - 7,5 14,4 - 7,5 13,9 - 7,5 13,4 - 7,5 13 - 7,5 11,5 - 10
8,7 - 7,5
10,3 - 10
8 - 7,5
9,4 - 10
2.900 r.p.m.
A
16,8 - 7,5 16,4 - 7,5 16 - 7,5 15,4 - 10 15 - 10 13,5 - 10 12,2 - 10 11,4 - 10
18,9 - 10 18,5 - 10 18 - 10 17,5 - 10 17 - 10 15,7 - 10 14,2 - 10 13,2 - 15
21 - 10 20,5 - 10 20,1 - 10 19,6 - 10 19,2 - 10 18 - 15 16,5 - 15 15,6 - 15
23 - 10 22,8 - 10 22,3 - 15 22 - 15 21,4 - 15 20,3 - 15 18,9 - 15 18 - 15 13,8 - 15
25 - 15 24,6 - 15 24,3 - 15 24 - 15 23,4 - 15 22,5 - 15 21,1 - 15 22,2 - 15 16 - 15
21,3 - 10 20,5 - 10 19,7 - 10 19 - 10 18 - 10 16 - 10
24,6 - 10 24 - 10 23,5 - 15 22,7 - 15 22 - 15 20 - 15 17,8 - 15 16,5 - 15
28,5 - 15 28 - 15 27,5 - 15 26,6 - 15 26 - 15 24 - 15 22 - 15 21 - 15
32 - 15 31,7 - 15 31,3 - 15 30,5 - 15 30 - 15 28,5 - 20 26,5 - 20 25,5 - 20
36 - 15 35,7 - 15 35,3 - 20 34,7 - 20 34 - 20 32,7 - 20 31 - 20 30 - 20
40 - 20 39,8 - 20 39,5 - 20 39 - 20 38,5 - 20 37,2 - 20 35,5 - 25 34,7 - 25 28,5 - 25
36,5 - 15 36 - 15 35 - 15 34 - 15 32,5 - 15 30 - 20 27 - 20 25 - 20
42 - 15 41,5 - 15 41 - 20 40 - 20 39 - 20 36,5 - 20 34 - 25 32 - 25
48 - 20 47,5 - 20 47 - 20 46 - 20 45 - 25 43 - 25 40,5 - 25 39 - 30
54 - 20 53,5 - 25 53 - 25 52,5 - 25 52 - 25 50 - 30 48 - 30 46,5 - 30
60 - 25 59,5 - 25 59 - 30 58,5 - 30 58 - 30 56,5 - 40 54,5 - 40 53,5 - 40
66 - 30 65,5 - 30 65 - 30 65 - 40 64,5 - 40 63 - 40 61 - 40 60 - 40 52,5 - 50
61 - 30 60 - 30 59,5 - 30 58 - 30 57 - 30 54 - 40 50,5 - 40 48 - 40
68 - 30 67 - 40 66 - 40 65 - 40 64 - 40 63 - 40 58,5 - 40 56,5 - 50
75 - 40 74 - 40 73 - 40 72 - 40 71 - 40 69 - 50 66 - 50 64 - 50
82 - 40 81,5 - 40 81 - 40 80 - 50 79 - 50 76,5 - 50 73,5 - 50 72 - 60 60 - 60
91,5 - 50 91,5 - 50 91 - 50 90 - 50 89,5 - 50 87,5 - 60 85 - 60 83 - 60 72,5 - 75
92 - 40 91 - 50 90 - 50 88 - 50 87 - 50 83 - 60 80 - 60 66 - 60
104 - 50 103 - 50 102 - 50 101 - 60 99 - 60 96 - 60 95 - 60 83 - 75
115 - 60 115 - 60 114,5 - 60 114 - 60 112 - 60 109,5 - 75 109 - 75 99,5 - 100 86 - 100
128 - 75 128 - 75 127,5 - 75 127 - 75 126 - 100 124 - 100 123 - 100 116 - 100 103,5 - 125 88 - 125
141 - 75 141 - 100 140,5 - 100 140 - 100 139,5 - 100 138 - 100 137 - 100 131,5 - 125 122,5 - 125 109 - 150
21,5 - 15 20,7 - 15 20 - 15 19,5 - 15 17 - 15 14,5 - 20 11,8 - 20 8,8 - 20
24,5 - 15 23,8 - 15 23 - 15 22,5 - 20 20,2 - 20 17,5 - 20 15 - 20 11,8 - 20
28 - 20 27,3 - 20 26,5 - 20 26 - 20 23,5 - 20 20,7 - 25 16,5 - 25 14,5 - 25
32 - 20 31,5 - 20 30,5 - 20 30 - 25 27,8 - 25 25 - 25 21,5 - 30 18,5 - 30
35,7 - 25 35,2 - 25 34,5 - 25 34,2 - 25 32 - 25 29,5 - 30 26,5 - 30 22,6 - 40 18,5 - 40
39,5 - 25 39,2 - 25 38,7 - 30 38,5 - 30 37 - 30 34,8 - 40 31,8 - 40 27,8 - 40 23 - 40
36 - 25 35,5 - 25 34,5 - 25 34 - 25 31 - 30 27 - 30 21,5 - 30
41 - 25 40,5 - 25 40 - 25 39,5 - 30 37 - 40 33 - 40 27,5 - 40
46,5 - 30 46 - 30 45,5 - 40 45 - 40 42 - 40 39 - 40 34 - 50
52 - 40 51,5 - 40 51,2 - 40 51 - 40 49 - 50 46,5 - 50 41 - 50 35 - 60
58 - 40 57,5 - 40 57,2 - 40 57 - 50 55 - 50 52 - 60 48 - 60 43 - 60
65 - 50 65 - 50 64,5 - 50 64 - 50 63 - 60 60 - 60 56,5 - 60 51,5 - 75 45 - 75
65,5 - 50 65 - 50 64 - 50 63 - 50 60 - 60 55,5 - 60 49 - 60
72 - 50 71,5 - 50 71 - 50 70 - 60 67 - 60 63 - 75 57 - 75 50 - 75
79 - 60 78 - 60 78 - 60 77 - 60 74,5 - 75 71 - 75 65,5 - 75 58,5 - 100
85 - 60 85 - 60 85 - 75 84,5 - 75 82 - 75 78,5 - 100 74 - 100 67,5 - 100 60,5 - 100
92,5 - 75 92,5 - 75 92 - 75 92 - 75 89,5 - 100 86,5 - 100 82 - 100 77 - 100 70 - 125 61,5 - 125
99 - 75 99 - 75 98,5 - 75 98,5 - 100 97 - 100 94 - 100 89 - 100 84 - 125 77 - 125 69 - 125
105 - 75 104 - 75 104 - 75 101 - 100 96 - 100 88 - 100 77 - 100
117 - 75 116,5 - 100 116 - 100 114 - 100 111 - 100 104 - 125 96,5 - 125 85 - 125
130 - 100 129,5 - 100 129,5 - 100 127,5 - 125 124,5 - 125 120,5 - 125 113,5 - 150
144 - 100 143,5 - 100 143,5 - 125 142 - 125 139 - 150
155 - 125 156 - 125 156 - 125 155,5 - 150
Q 0 120 150 180 210 240 270 300 330 360 420
MODELO m3/h 0 2000 2500 3000 3500 4000 4500 5000 5500 6000 6000
l/min
KDN 100-200 / 180 40 - 40 40 - 40 38 - 40 36 - 40 33 - 40 30,5 - 50 28 - 50 25 - 50
KDN 100-200 / 190 46,5 - 50 45 - 50 44 - 50 42 - 50 39 - 50 37 - 50 34,5 - 60 31 - 60 28 - 60
KDN 100-200 / 200 51,5 - 50 51 - 50 50 - 50 48,5 - 60 46 - 60 44 - 60 42 - 75 39 - 75 35 - 75
KDN 100-200 / 210 57,5 - 60 57 - 60 56 - 60 55 - 75 53 - 75 51 - 75 49 - 75 46 - 100 43 - 100 36 - 100
KDN 100-200 / 219 H 64 - 75 62,5 - 75 62 - 75 61 - 75 60 - 75 58 - 100 56 - 100 53 - 100 50 - 100 43 - 100
KDN 100-250 / 220 (m) 61 - 60 61,5 - 60 59,5 - 60 57 - 75 54 - 75 50,5 - 100 46,5 - 100 42 - 100
KDN 100-250 / 230 67 - 75 68 - 75 66,5 - 75 64 - 75 61 - 100 58 - 100 54 - 100 49 - 100 44 - 100
KDN 100-250 / 240 73 - 75 76 - 75 74 - 75 71,5 - 100 69 - 100 66 - 100 63 - 100 58,5 - 125 53 - 125
KDN 100-250 / 250 80 - 100 83 - 100 81,5 - 100 79,5 - 100 77 - 100 74 - 125 71 - 125 67 - 125 62,5 - 150
KDN 100-250 / 260 88 - 100 90,5 - 100 89,5 - 100 88 - 100 86 - 125 83 - 125 79,5 - 125 76 - 150 71,5 - 150
N. negro: Altura m.c.a. - N. verde: Potencia Nominal en CV
N black: Height w.c.m. - N Green: Nominal Power HP
Q (IMPgpm)
1 2 3 5 10 20 40 80 130
1 2 3 5 10 20 40 80 100 158
120 Q (USgpm)
390
100
90 300
H (m)
H (ft)
80
40/250 50/250 80/250
70 65/250
100/250
60 200
50
32/200 65/200 80/200
50/200 150
32/200.1
40/200 100/200
40
34
30 32/160.1 40/160 50/160 100
32/160 65/160
80
80/160
20
32/125.1
18 60
16 32/125
40/125 50/125
65/125
14
12 40
10
9 30
8
6 20
2 3 4 5 6 10 14 20 24 30 40 50 60 70 80 100 200 300 400 3
600 700
Q (m /h)
22
Normalizadas a 1.450 r.p.m.
Serie KDN
Q 0 3 6 12 18 24 30 36 42 48 54
MODELO m3/h
Q 0 3 6 12 18 24 30 36 42 48 54 60
MODELO m3/h
l/min 0 50 100 200 300 400 500 600 700 800 900 1000
KDN 50-125 / 115 4,2 - 0,5 4,1 - 0,5 3,9 - 0,5 3,6 - 0,75 3,3 - 0,75 2,9 - 0,75 2,3 - 0,75
KDN 50-125 / 120 4,6 - 0,5 4,4 - 0,5 4,3 - 0,75 4 - 0,75 3,7 - 1 3,3 - 1 2,8 - 1
KDN 50-125 / 125 5 - 0,75 4,9 - 0,75 4,7 - 0,75 4,5 - 0,75 4,2 - 1 4,2 - 1 3,7 - 1 3,3 - 1,5
KDN 50-125 / 130 5,6 - 0,75 5,4 - 0,75 5,2 - 1 5-1 4,7 - 1,5 4,2 - 1,5 3,8 - 1,5 3,2 - 1,5
KDN 50-125 / 135 6-1 5,8 - 1 5,7 - 1 5,5 - 1,5 5,2 - 1,5 4,8 - 1,5 4,3 - 1,5 3,8 - 1,5
KDN 50-125 / 139 6,3 - 1 6,9 - 1 6,1 - 1,5 5,9 - 1,5 5,6 - 1,5 5,2 - 1,5 4,8 - 1,5 4,2 - 1,5
KDN 50-125 / 144 6,7 - 1 6,7 - 1 6,6 - 1,5 6,4 - 1,5 6,2 - 1,5 5,8 - 1,5 5,3 - 1,5 4,8 - 1,5 4,1 - 1,5
KDN 50-160 / 137 6,05 - 0,75 6,1 - 0,75 5,95 - 0,75 5,7 - 1 5,3 - 1 4,8 - 1,5 4,2 - 1,5
KDN 50-160 / 145 6,8 - 0,75 6,9 - 0,75 6,85 - 1 6,6 - 1 6,2 - 1,5 5,8 - 1,5 5,1 - 1,5
KDN 50-160 / 153 7,6 - 1 7,8 - 1 7,75 - 1,5 7,5 - 1,5 7,2 - 1,5 6,7 - 2 6,2 - 2
KDN 50-160 / 161 8,4 - 1 8,6 - 1 8,65 - 1,5 8,45 - 1,5 8,2 - 2 7,7 - 2 7,2 - 2
KDN 50-160 / 169 9,4 - 1,5 9,6 - 1,5 9,6 - 2 9,45 - 2 9,2 - 2 8,8 - 3 8,3 - 3
KDN 50-160 / 177 10,4 - 1,5 10,5 - 1,5 10,6 - 2 10,5 - 2 10,2 - 3 9,95 - 3 9,4 - 3
KDN 50-200 / 170 9,5 - 1,5 9,6 - 1,5 9,4 - 1,5 8,8 - 1,5 8-2 6,85 - 2
KDN 50-200 / 180 10,6 - 1,5 10,8 - 1,5 10,6 - 1,5 10,2 - 2 9,5 - 3 8,6 - 3 7,3 - 3
KDN 50-200 / 190 11,8 - 1,5 12 - 1,5 11,9 - 2 11,5 - 3 10,8 - 3 10,1 - 3 8,9 - 3
KDN 50-200 / 200 13,1 - 2 13,4 - 2 13,3 - 3 12,9 - 3 12,3 - 3 11,6 - 4 10,6 - 4 9,4 - 4
KDN 50-200 / 210 14,6 - 2 14,8 - 2 14,8 - 3 14,5 - 3 13,9 - 4 13,2 - 4 12,2 - 4 11 - 4
KDN 50-200 / 219 16 - 3 16,2 - 3 16,2 - 3 15,9 - 3 15,4 - 4 14,2 - 4 13,8 - 4 12,7 - 5,5 11,4 - 5,5
KDN 50-250 / 220 16 - 3 16,3 - 3 16,1 - 3 15,5 - 3 14,9 - 4 13,8 - 4 12,4 - 4 10,5 - 4
KDN 50-250 / 230 17,4 - 3 17,9 - 3 17,8 - 3 17,2 - 4 16,5 - 4 15,5 - 4 14,2 - 5,5 12,6 - 5,5 10,3 - 5,5
KDN 50-250 / 240 19 - 3 19,5 - 3 19,5 - 4 19 - 4 18,2 - 5,5 17,4 - 5,5 16,2 - 5,5 14,7 - 7,5 12,4 - 7,5
KDN 50-250 / 250 20,8 - 4 21,3 - 4 21,3 - 4 20,9 - 4 20,1 - 5,5 19,5 - 5,5 18,1 - 7,5 17 - 7,5 14,8 - 7,5
KDN 50-250 / 263 23 - 4 23,5 - 4 23,5 - 4 23,2 - 5,5 22,5 - 5,5 21,7 - 7,5 20,6 - 7,5 19,4 - 7,5 17,5 - 7,5
KDN 65-125 / 120 / 110 3,75 - 0,75 3,5 - 0,75 3,3 - 0,75 3,2 - 1 2,9 - 1 2,7 - 1 2,3 - 1 1,9 - 1
KDN 65-125 / 120 4,25 - 1 3,9 - 1 3,8 - 1 3,6 - 1 3,3 - 1 3,1 - 1,5 2,7 - 1,5 2,3 - 1,5
KDN 65-125 / 125 H 4,7 - 1 4,4 - 1 4,25 - 1 4,1 - 1,5 3,8 - 1,5 3,6 - 1,5 3,25 - 1,5 2,8 - 1,5
(m)
KDN 65-125 / 130 5,1 - 1 4,9 - 1 4,75 - 1,5 4,6 - 1,5 4,3 - 1,5 4,1 - 1,5 3,8 - 1,5 3,3 - 1,5
KDN 65-125 / 135 5,6 - 1,5 5,4 - 1,5 5,3 - 1,5 5,2 - 1,5 4,9 - 1,5 4,7 - 2 4,3 - 2 3,9 - 2
KDN 65-125 / 140 6 - 1,5 5,9 - 1,5 5,8 - 1,5 5,7 - 1,5 5,5 - 1,5 5,2 - 2 4,9 - 2 4,5 - 2
KDN 65-125 / 144 6,5 - 1,5 6,35 - 1,5 6,25 - 1,5 6,2 - 2 5,9 - 2 5,7 - 2 5,4 - 2 5-2
KDN 65-160 / 137 5,8 - 1 5,7 - 1 5,4 - 1 5,2 - 1,5 4,75 - 1,5 4,3 - 1,5 3,7 - 1,5
KDN 65-160 / 145 6,5 - 1,5 6,5 - 1,5 6,3 - 1,5 6 - 1,5 5,7 - 1,5 5,3 - 2 4,75 - 2 4,1 - 2
KDN 65-160 / 153 7,3 - 1,5 7,4 - 1,5 7,2 - 1,5 6,9 - 1,5 6,7 - 2 6,3 - 2 5,8 - 2 5,2 - 2
KDN 65-160 / 161 8,2 - 2 8,25 - 2 8,15 - 2 7,9 - 2 7,7 - 2 7,3 - 3 6,85 - 3 6,3 - 3
KDN 65-160 / 169 9,1 - 2 9,2 - 2 9,1 - 2 8,9 - 3 8,7 - 3 8,4 - 3 8-3 7,6 - 3
KDN 65-160 / 177 10 - 3 10,2 - 3 10,1 - 3 9,9 - 3 9,7 - 3 9,45 - 3 9,1 - 3 8,7 - 4
KDN 65-200 / 170 9,4 - 2 9,7 - 2 9,6 - 2 9,4 - 2 9-3 8,5 - 3 7,9 - 3 7,1 - 3 6,5 - 3
KDN 65-200 / 180 10,5 - 2 10,9 - 2 10,4 - 2 10,6 - 3 10,4 - 3 10 - 3 9,5 - 4 8,8 - 4 8,1 - 4
KDN 65-200 / 190 12,1 - 3 12,3 - 3 12,4 - 3 12,2 - 3 11,9 - 4 11,6 - 4 11,1 - 4 10,5 - 4 9,8 - 4
KDN 65-200 / 200 13,4 - 3 13,6 - 3 13,7 - 3 13,7 - 4 13,5 - 4 13,2 - 4 12,8 - 4 12,3 - 5,5 11,6 - 5,5
KDN 65-200 / 210 14,8 - 4 15 - 4 15,1 - 4 15 - 4 14,9 - 4 14,7 - 5,5 14,3 - 5,5 13,8 - 5,5 13,4 - 5,5
KDN 65-200 / 219 16,3 - 4 16,5 - 4 16,6 - 4 16,5 - 4 16,4 - 4 16,2 - 5,5 16 - 5,5 15,6 - 5,5 15 - 7,5
KDN 65-250 / 220 15,8 - 4 15,8 - 4 15,5 - 4 15,1 - 4 14,5 - 5,5 14 - 5,5 13,2 - 5,5 12 - 5,5
KDN 65-250 / 230 17,4 - 4 17,4 - 4 17,2 - 4 16,8 - 5,5 16,3 - 5,5 15,7 - 5,5 15 - 7,5 14,1 - 7,5
KDN 65-250 / 240 19 - 5,5 19 - 5,5 18,9 - 5,5 18,5 - 5,5 18,1 - 7,5 17,5 - 7,5 16,8 - 7,5 16 - 7,5
KDN 65-250 / 250 20,7 - 5,5 20,7 - 5,5 20,6 - 5,5 20,4 - 7,5 20 - 7,5 19,5 - 7,5 18,8 - 7,5 18 - 7,5
KDN 65-250 / 263 23,2 - 7,5 23 - 7,5 23 - 7,5 22,9 - 7,5 22,5 - 7,5 22,2 - 7,5 21,6 - 7,5 20,8 - 10
KDN 65-315 / 260 22,2 - 7,5 22,2 - 7,5 22,1 - 7,5 22 - 7,5 21,5 - 7,5 21 - 10 20,5 - 10 20 - 10
KDN 65-315 / 275 25,1 - 7,5 25,1 - 7,5 25 - 7,5 24,8 - 7,5 24,6 - 10 24,1 - 10 23,5 - 10 23 - 10
KDN 65-315 / 290 28,1 - 7,5 28,1 - 7,5 28,1 - 7,5 28 - 10 27,8 - 10 27,3 - 10 27 - 10 26,5 - 15
KDN 65-315 / 305 31,8 - 10 31,8 - 10 31,8 - 10 31,7 - 10 31,5 - 10 31,2 - 15 30,8 - 15 30,4 - 15
KDN 65-315 / 320 35,7 - 10 35,4 - 10 35,3 - 10 35,2 - 15 35,1 - 15 35 - 15 34,8 - 15 34,5 - 15
N. negro: Altura m.c.a. - N. verde: Potencia Nominal en CV
N black: Height w.c.m. - N Green: Nominal Power HP
24
Tablas de seleccin rpida / Numerical selection table
Serie KDN
66 72 78 84 90 102 114 120 150 180 210 240 270 300 330 360 390 420
1100 1200 1300 1400 1500 1700 1900 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000
A
1.450 r.p.m.
2,8 - 2
3,5 - 2 3-2
4,1 - 2 3,6 - 2
4,6 - 2 4,2 - 2 3,7 - 2
5,8 - 3
7,1 - 3 6-3
8,2 - 4 7,5 - 4
8,8 - 4
10,8 - 5,5
12,7 - 7,5 12 - 7,5
14,4 - 7,5 13,5 - 7,5 12,7 - 7,5
10,7 - 5,5
12,7 - 7,5 11,4 - 7,5
14,7 - 7,5 13,6 - 7,5
17 - 7,5 15,9 - 10 14,5 - 10
19,8 - 10 18,6 - 10 17,4 - 10 16 - 10
19,2 - 10 18,4 - 10 17 - 10 16 - 10 15 - 10
22,5 - 10 21,5 - 10 20,5 - 15 19,4 - 15 18,1 - 15
25,5 - 15 25 - 15 24 - 15 23,1 - 15 22 - 15 19,5 - 15
29,6 - 15 29 - 15 28 - 15 27,2 - 15 26,1 - 20 23,5 - 20
33,8 - 15 33,5 - 15 32,5 - 20 31,5 - 20 30,8 - 20 28 - 20 24,8 - 20
Q 0 3 6 12 18 24 30 36 42 48 54 60
MODELO m3/h
l/min 0 50 100 200 300 400 500 600 700 800 900 1000
KDN 80-160 / 147 / 127 5,7 - 2 5,4 - 2 5,25 - 2 5,05 - 2 4,8 - 2
KDN 80-160 / 153 / 136 6,4 - 3 6,2 - 3 6,05 - 3 5,85 - 3 5,7 - 3
KDN 80-160 / 153 7,3 - 3 7,1 - 3 6,9 - 3 6,7 - 3 6,5 - 3
KDN 80-160 / 161 8,2 - 3 8-3 7,9 - 3 7,75 - 3 7,5 - 3
KDN 80-160 / 169 9,1 - 4 9-4 8,85 - 4 8,7 - 4 8,6 - 4
KDN 80-160 / 177 10 - 4 9,9 - 4 9,85 - 4 9,8 - 4 9,7 - 4
KDN 80-200 / 170 9,2 - 4 9,1 - 4 9-4 8,7 - 4 8,5 - 4
KDN 80-200 / 180 10,3 - 4 10,4 - 4 10,2 - 4 10 - 4 9,9 - 4
KDN 80-200 / 190 11,4 - 4 11,7 - 4 11,6 - 4 11,5 - 5,5 11,3 - 5,5
KDN 80-200 / 200 12,7 - 5,5 13 - 5,5 13 - 5,5 12,8 - 7,5 12,7 - 7,5
KDN 80-200 / 210 14,1 - 5,5 14,5 - 5,5 14,4 - 5,5 14,4 - 7,5 14,2 - 7,5
KDN 80-200 / 222 15,9 - 7,5 16,2 - 7,5 16,2 - 7,5 16,1 - 7,5 16,1 - 7,5
KDN 80-250 / 220 16 - 7,5 16,4 - 7,5 16,2 - 7,5 16,1 - 7,5 15,9 - 7,5
KDN 80-250 / 230 17,3 - 7,5 18 - 7,5 17,9 - 7,5 17,7 - 7,5 17,5 - 7,5
KDN 80-250 / 240 19 - 7,5 19,7 - 7,5 19,6 - 7,5 19,5 - 7,5 19,3 - 10
KDN 80-250 / 250 20,6 - 10 21,4 - 10 21,3 - 10 21,2 - 10 21 - 10
KDN 80-250 / 260 22,6 - 10 23,1 - 10 23 - 10 22,9 - 10 22,8 - 10
KDN 80-250 / 270 24,5 - 10 24,8 - 10 24,7 - 10 24,6 - 10 24,5 - 10
KDN 80-315 / 275 24,9 - 15 25,5 - 15 25,4 - 15 25,3 - 15
KDN 80-315 / 290 28 - 15 28,8 - 15 28,6 - 15 28,3 - 15
KDN 80-315 / 305 31,4 - 15 32,1 - 15 32 - 15 32 - 15
KDN 80-315 / 320 34,8 - 20 35,8 - 20 35,9 - 20 35,8 - 20
KDN 80-315 / 334 38,3 - 20 39 - 20 39,1 - 20 39,1 - 20
KDN 100-200 / 180 10,2 - 7,5 10,1 - 7,5
KDN 100-200 / 190 H 11,6 - 7,5 11,5 - 7,5
KDN 100-200 / 200 (m) 12,9 - 7,5 12,8 - 7,5
KDN 100-200 / 210 14,3 - 10 14,2 - 10
KDN 100-200 / 219 16 - 10 15,7 - 10
KDN 100-250 / 220 15,2 - 10 15,6 - 10
KDN 100-250 / 230 16,9 - 10 17,4 - 10
KDN 100-250 / 240 18,5 - 15 19,1 - 15
KDN 100-250 / 250 20,1 - 15 20,7 - 15
KDN 100-250 / 260 22,3 - 15 22,7 - 15
KDN 100-250 / 270 24,3 - 15 24,6 - 15
KDN 100-315 / 275 25 - 15 25,5 - 15
KDN 100-315 / 290 28 - 20 28,5 - 20
KDN 100-315 / 305 31,2 - 20 31,8 - 20
KDN 100-315 / 320 34,5 - 25 35 - 25
KDN 100-315 / 334 38,1 - 25 38,1 - 25
KDN 125-250 / 220 15 - 15
KDN 125-250 / 230 16,7 - 15
KDN 125-250 / 240 18,2 - 20
KDN 125-250 / 250 19,9 - 20
KDN 125-250 / 260 21,8 - 25
KDN 125-250 / 269 24 - 25
KDN 150-200 / 210 / 170 9,2 - 15
KDN 150-200 / 218 / 182 10,5 - 15
KDN 150-200 / 218 / 200 11,6 - 15
KDN 150-200 / 218 12,9 - 20
KDN 150-200 / 224 13,8 - 20
N. negro: Altura m.c.a. - N. verde: Potencia Nominal en CV
N black: Height w.c.m. - N Green: Nominal Power HP
26
Tablas de seleccin rpida / Numerical selection table
Serie KDN
66 72 78 84 90 102 114 120 150 180 210 240 270 300 330 360 390 420
1100 1200 1300 1400 1500 1700 1900 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000
A
4,6 - 2 4,35 - 3 4,15 - 3 3,85 - 3 3,6 - 3 3,1 - 3 2,5 - 3 2,2 - 3
5,4 - 3 5,15 - 3 4,8 - 3 4,65 - 3 4,4 - 3 3,85 - 3 3,3 - 3 3-3
1.450 r.p.m.
6,3 - 3 6-3 5,75 - 3 5,4 - 3 5,2 - 3 4,55 - 4 3,9 - 4 3,6 - 4
7,3 - 3 7,05 - 4 6,8 - 4 6,5 - 4 6,25 - 4 5,6 - 4 4,9 - 4 4,6 - 4
8,35 - 4 8,1 - 4 7,85 - 4 7,6 - 4 7,3 - 4 6,75 - 5,5 6 - 5,5 5,7 - 5,5
9,5 - 4 9,3 - 5,5 9,1 - 5,5 8,85 - 5,5 8,7 - 5,5 8,1 - 5,5 7,25 - 5,5 6,9 - 5,5
8,2 - 4 7,8 - 4 7,5 - 4 7,1 - 4 6,7 - 5,5 5,6 - 5,5
9,6 - 4 9,2 - 5,5 9 - 5,5 8,6 - 5,5 8,2 - 5,5 7,2 - 5,5
11 - 5,5 10,7 - 5,5 10,5 - 5,5 10,1 - 7,5 9,8 - 7,5 8,7 - 7,5 6,8 - 7,5
12,5 - 7,5 12,3 - 7,5 12 - 7,5 11,6 - 7,5 11,4 - 7,5 10,5 - 7,5 9,4 - 7,5 8,8 - 7,5
14,1 - 7,5 13,9 - 7,5 13,7 - 7,5 13,3 - 7,5 13,1 - 7,5 12,1 - 7,5 11,2 - 10 10,6 - 10
16 - 7,5 15,7 - 7,5 15,6 - 7,5 15,3 - 7,5 15 - 10 14,3 - 10 13,4 - 10 12,8 - 10
15,5 - 7,5 15,2 - 7,5 14,9 - 7,5 14,5 - 7,5 13,9 - 10 12,8 - 10
17,2 - 7,5 16,9 - 10 16,5 - 10 16 - 10 15,5 - 10 14,3 - 10 12,4 - 10
19 - 10 18,7 - 10 18,4 - 10 18 - 10 17,6 - 10 16,6 - 15 15,3 - 15 14,6 - 15
20,8 - 10 20,6 - 10 20,3 - 10 19,9 - 15 19,6 - 15 18,6 - 15 17,4 - 15 16,8 - 15
22,6 - 10 22,4 - 15 22,1 - 15 21,8 - 15 21,4 - 15 20,6 - 15 19,6 - 15 19 - 15 15,1 - 15
24,4 - 15 24,3 - 15 24,1 - 15 23,7 - 15 23,3 - 15 22,4 - 15 21,4 - 15 20,7 - 15 16,3 - 20
25,1 - 15 25 - 15 24,8 - 15 24,3 - 15 24 - 15 23 - 15 21,4 - 20 20,5 - 20
28,3 - 15 28,1 - 15 28 - 15 27,5 - 15 27,4 - 15 26,5 - 20 25 - 20 24,6 - 20 19,1 - 20
32 - 20 31,8 - 20 31,5 - 20 31,2 - 20 30,9 - 20 30 - 20 29 - 25 28,5 - 25 24 - 25
35,6 - 20 35,4 - 20 35 - 20 34,9 - 20 34,7 - 20 34 - 20 33,2 - 25 32,8 - 25 28,8 - 30
39 - 20 38,8 - 20 38,6 - 20 38,5 - 20 38,3 - 25 37,9 - 25 37 - 25 36,9 - 30 33,1 - 30 28 - 40
10,1 - 7,5 10 - 7,5 9,9 - 7,5 9,7 - 7,5 9,5 - 7,5 9,1 - 7,5 8,5 - 7,5 8,3 - 7,5 7 - 7,5 5,4 - 7,5
11,4 - 7,5 11,3 - 7,5 11,2 - 7,5 11,1 - 7,5 11 - 7,5 10,5 - 7,5 10,1 - 7,5 10 - 7,5 8,6 - 10 7 - 10
12,8 - 7,5 12,8 - 7,5 12,7 - 7,5 12,6 - 10 12,5 - 10 12,2 - 10 11,8 - 10 11,6 - 10 10,4 - 10 8,8 - 10
14,2 - 10 14,2 - 10 14,2 - 10 14,1 - 10 14 - 10 13,8 - 10 13,5 - 10 13,3 - 10 12,3 - 15 10,7 - 15 9 - 15
15,7 - 10 15,6 - 10 15,6 - 10 15,5 - 10 15,5 - 10 15,3 - 10 15,1 - 15 15 - 15 14 - 15 12,5 - 15 10,8 - 15
15,5 - 10 15,3 - 10 15,2 - 10 15 - 10 14,8 - 10 14,3 - 10 13,7 - 15 13,4 - 15 11,4 - 15
17,3 - 10 17,2 - 10 17 - 10 16,8 - 15 16,6 - 15 16,2 - 15 15,7 - 15 15,3 - 15 13,6 - 15 11,1 - 15
19 - 15 18,9 - 15 18,8 - 15 18,6 - 15 18,5 - 15 18,2 - 15 17,6 - 15 17,4 - 15 15,7 - 20 13,3 - 20
20,7 - 15 20,6 - 15 20,5 - 15 20,4 - 15 20,3 - 15 20 - 15 19,4 - 15 19,2 - 15 17,6 - 20 15,4 - 20
22,7 - 15 22,6 - 15 22,5 - 15 22,5 - 15 22,4 - 15 22,1 - 15 21,6 - 15 21,4 - 20 19,8 - 20 17,7 - 20 15,1 - 20
24,6 - 15 24,6 - 15 24,6 - 15 24,5 - 15 24,4 - 15 24,1 - 20 23,7 - 20 23,5 - 20 22,1 - 20 20,1 - 25 17,3 - 25
25,4 - 15 25,3 - 15 25,2 - 15 25,1 - 15 25 - 15 24,7 - 20 24,4 - 20 24 - 20 22 - 20 19 - 25
28,5 - 20 28,5 - 20 28,4 - 20 28,3 - 20 28,2 - 20 28 - 20 27,7 - 20 27 - 20 25,5 - 25 23 - 25
31,8 - 20 31,8 - 20 31,7 - 20 31,6 - 20 31,5 - 20 31,2 - 25 30,8 - 25 30,5 - 25 29 - 30 27 - 30 24 - 40
35 - 25 35 - 25 35 - 25 35 - 25 35 - 25 34,8 - 25 34,5 - 25 34,2 - 25 33 - 30 31 - 40 28,1 - 40
38,1 - 25 38,1 - 25 38,1 - 25 38 - 25 38 - 25 37,7 - 30 37,5 - 30 37,3 - 30 36,5 - 40 34,8 - 40 32 - 40 28,8 - 40
15,5 - 15 15,5 - 15 15,4 -15 14,8 - 15 14 - 15 13 - 15 11,8 - 20 10,5 - 20 9,2 - 20
17,1 - 15 17 - 15 17 - 15 16,5 - 15 15,8 - 20 14,8 - 20 13,8 - 20 12,5 - 20 12,3 - 20 9,5 - 20
18,5 - 20 18,5 - 20 18,5 - 20 18,2 - 20 17,6 - 20 16,8 - 20 15,8 - 20 14,5 - 25 13,3 - 25 11,6 - 25 10,1 - 25
20 - 20 20 - 20 20 - 20 19,9 - 20 19,5 - 20 18,7 - 25 17,8 - 25 16,6 - 25 15,5 - 25 14 - 30 12,3 - 30
22 - 25 22 - 25 22 - 25 21,7 - 25 21,3 - 25 20,6 - 25 19,9 - 25 18 - 30 17,7 - 30 16,3 - 30 14,6 - 30 13 - 30
23,9 - 25 23,9 - 25 23,8 - 25 23,6 - 25 23,2 - 25 22,7 - 30 22,1 - 30 22,2 - 30 20,2 - 40 19 - 40 17,5 - 40 15,6 - 40 14 - 40
9,1 - 15 8,9 - 15 8,6 - 15 8,3 - 15 7,9 - 15 7,5 - 15 6,8 - 15 5,9 - 15 5,4 - 15
10,3 - 15 10,2 - 15 9,9 - 15 9,5 - 15 9,1 - 15 8,6 - 15 8,1 - 15 7,4 - 15 6,6 - 15
11,4 - 15 11,2 - 15 10,9 - 15 10,5 - 15 10,1 - 20 9,7 - 20 9,2 - 20 8,5 - 20 7,8 - 20 6,9 - 20 5,9 - 20
12,6 - 20 12,4 - 20 12,1 - 20 11,6 - 20 11,1 - 20 10,7 - 20 10,2 - 20 9,5 - 20 8,8 - 20 8 - 20 7,1 - 20
13,5 - 20 13,3 - 20 13 - 20 12,6 - 20 12,2 - 20 11,7 - 20 11,2 - 20 10,6 - 20 9,9 - 20 9,1 - 20 8,2 - 20
27
Centrfugas
Serie CR
Aplicaciones: Applications:
Las electrobombas de la Serie CR son especialmente ade- The electropumps of the CR Series are particularly suitable for
large transfers, drip irrigation, etc. at relatively low pressures.
cuadas para grandes trasvases, riegos por goteo, etc. a pre-
siones relativamente bajas. Construction:
Pump body, motor support and impeller in high strength cast
Caractersticas constructivas: iron with epoxy-polyester paint, mechanical seal in carbon ce-
ramic and stainless steel shaft(aisi 316).
Cuerpo de bomba, soporte bomba motor y turbina en fun-
dicin de alta calidad con un pretratamiento de pintura Motor:
epoxi-poliester y secado al horno para darle ms durabilidad y Sealed, asynchronous, with external ventilation, suitable for
resistencia a la oxidacin, sello mecnico en cermica carbn continuous work. IP-55 protection. All motors are standard
at 2,850 r.p.m.
y eje en acero inoxidable AISI-316.
Maximum water temperature 95 C
Motor: Maximum ambient temperature 40 C
Motor asncrono normalizado, tipo cerrado y de ventilacin
externa, apto para trabajo continuo. Grado de proteccin IP-55,
a 2.850 r.p.m.
Temperatura mxima del agua 95 C
Temperatura mxima ambiente 40 C
Presin mxima admitida 6 bar
En los modelos de 3 y 4 CV recomendamos la instalacin con tubo de 90 mm. (For 3-4 HP we recomend minimum 90 mm. pipe)
28
Centrfugas en Bronze Marino
Serie CRB
Aplicaciones: Applications:
Electrobombas centrfugas construidas integramente en Centrifugal electropumps built entirely in marine
bronce marino especialmente adecuados para grandes tras- bronze, particularly suitable for large transfers of very
vases de lquidos especialemente agresivos o bien agua de aggressive liquids or sea water at relatively low pres-
mar a presiones relativamente bajas. sures.
Motor: Motor:
Asncrono standard, cerrado de ventilacin externa. Grado Standard sealed asynchronous motor with external ven-
de proteccin IP-54. 50 Hz. Todos los motores de esta serie tilation. IP-55 protection. 50 Hz All motors are standard
son a 2.850 r.p.m. at 2,850 rpm.
En los modelos de 3 y 4 CV recomendamos la instalacin con tubo de 90 mm. (For 3-4 HP we recomend minimum 90 mm. pipe)
29
Centrfugas
Serie KONTRA
1.450 r.p.m. de 3 a 10 HP
2.850 r.p.m. 12,5 y 15 HP
Aplicaciones: Applications:
Bomba extremadamente silenciosa dado que gira a 1.450 rpm Extreamly silent pump, at 1,450 rpm until 10HP.
hasta 10CV. Centrifugal pumps with a high flow capacity generated alow
Bomba centrfuga que gracias al gran caudal que genera a pressure, makes it the ideal pumps for a lot of types of
bajas presiones, la hace idonea para muchos tipos de insta- installations likes cooling installations, big transfers, etc...
laciones, como instalaciones de refrigeracin, trasvase, etc... No possible electrical contact with the water as no part of
Imposibilidad de comunicacin elctrica con el agua, ya que the motor is open to it.
ninguna parte del motor tiene contacto con el liquido bom-
beado. Constructive Characteristics:
Pump body, Volut, Base & pump body lid in polypropylene
Caractersticas Constructivas: resistant to Chemicals products used in pools and rein-
Cuerpo bomba, Voluta, Base y Tapa cuerpo bomba en po- forced with fiber glass. Strainer lid in polycarbonate with
lipropileno resistente a los productos qumicos de las pis- a closing system using four handles. Noryl impeller in
cinas, y reforzado con fibra de vidrio. Rodete de Noryl en KONTRA-4 300 & 400. Noryl or Bronze impeller in
KONTRA-4 300 y 400. Rodete de Noryl o Bronce en KONTRA-4 550, 750 & 1000. Bronze impeller in
KONTRA-4 550, 750 y 1000. Rodete de Bronce en KONTRA-2 1250 & 1500. Mechanical seal in stainless
KONTRA-2 1250 y 1500. Cierre mecnico en acero inoxi- steel AISI-316, designed for transfer of aggressive li-
dable AISI-316, especialmente concebidas para trasiego quids and sea water. Nuts and bolts in stainless steel
de lquidos agresivos y agua de mar. Tornilleria en acero AISI 304. Shaft in stainless steel AISI-316.
inoxidable AISI 304. Eje en acero inoxidable AISI-316.
Motor:
Motor: Standard Asynchronous motor, sealed with external ven-
Motor asncrono cerrado de ventilacin externa. Grado de tilation. Protection IP-55. Isolation class F. 1,450 rpm y
proteccin IP-55. Aislamiento clase F. 1.450 rpm y 2.850 2,850 rpm. Double frequency 50 Hz y 60 Hz. Motor bea-
rpm. Doble frecuencia 50 Hz y 60 Hz. Rodamientos engrasa- rings greased for life and selected to ensure long durration
dos de por vida, garantizando una larga duracin y un trabajo and silent working.
silencioso.
Serie V-NOX 32
Serie VAT 38
31
Verticales Multicelulares Inoxidable
Serie V-NOX
Aplicaciones:
Las bombas verticales multicelulares de la serie V-NOX, por su ele-
vado rendimiento y funcionamiento EXTREMADAMENTE SILEN-
CIOSO, son especialmente indicadas para su uso en equipos de
presurizacin y equipos contra incendios.
Caractersticas Constructivas:
Turbinas, eje bomba, cuerpo bomba en acero inoxidable AISI 304,
difusores en tecnopolmero inyectado con fibra de vidrio, contrabri-
das de aspiracin e impulsin, base aspiracin y cuerpo de impul-
sin en fundicin GG-20 con tratamiento de pintura epoxi-poliester
interior y exterior para ofrecer mas resistencia a la oxidacin. Eje
apoyado sobre casquillo inferior gua en Bronce. Cierre mecnico en
cermica grafito y AISI 304.
Motor:
Motor asncrono, cerrado de ventilacin externa, apto para trabajo
continuo. Grado de proteccin IP-55, aislamiento clase F (calenta-
miento B) aptos para trabajo a travs de variadores de frecuencia.
Temperatura mxima del agua: 45 C.
Temperatura mxima ambiente: 45 C.
Applications:
The multistage vertical pumps of the V-NOX series, through their high output
and EXTREMELY SILENT operation, are particularly recommended for use in
pressure and fire-fighting equipment both for civil and industrial use.
Motor:
Constructive characteristics: Standard asynchronous motor, sealed from external ventila-
Impeller, pump shaft, pump housing in AISI 304 stainless steel, diffusers in tion, suitable for continuous work. IP-55 protection, class F
technopolymer injected with glass fiber, suction and drive counter-flanges, isolation (heating B) suitable for work through frequency
suction base and drive housing in GG-20 cast iron with exterior and interior inverters.
epoxi-poliester treatement to prevent rust. Shaft supported on lower bus- Maximum water temperature: 45 C.
hing, guide in Bronze. Mechanical seal in graphite ceramic and AISI 304. Maximum ambient temperature: 45 C.
Aplicaciones: Applications:
Las electrobombas de la serie XV-F son bombas centrfugas The electropumps of the XV-F series are multicellular
verticales multicelulares, no autocebantes, con bocas de as- vertical centrifugal pumps, non self-priming, with suction
piracin e impulsin en lnea, que por su elevado rendimiento and drive in line, and their high output makes them ideal
las hace ideales para su uso en equipos de presin, en instala- for use in pressure equipment, industrial installations and
ciones industriales y en todas aquellas aplicaciones en que se all applications requiring high pressures with moderate
requiera altas presiones con caudales moderados. flows.
Motor: Motor:
Motor asncrono, tipo cerrado y de ventilacin externa, apto Sealed asynchronous with external ventilation, suitable
para trabajo continuo. Grado de proteccin IP-54, aislamiento for continuous work. IP-55 protection, class F insulation,
clase F, a 2.850 r.p.m. Los modelos monofsicos a 230 V incor- at 2,850 rpm. Single phase versions at 230 V includes a
poran un protector trmico y condensador permanente. thermal protector and permanent capacitor.
Temperatura del lquido a bombear . . . . -15 C a +120 C Maximum water temperature . . . . -15 C to +120 C
Temperatura mxima ambiente . . . . . . . . . . . . . . . . . 50 C Maximum ambient temperature . . . . . . . . . . . . 50 C
33
Verticales Multicelulares Inoxidable. AISI 304
Serie XV-F
Aplicaciones: Applications:
Las electrobombas de la serie SSV-F son centrfugas verticales The electropumps of the SSV-F series are multicellular
multicelulares con bocas de aspiracin e impulsin en lnea, vertical centrifugal units with suction and drive in line,
que por su elevado rendimiento y los materiales que las com- and their high output materials makes them ideal for use
ponen las hace ideales para su uso en instalaciones industriales in pressure equipment, industrial installations that works
especiales para su uso en aguas abrasivas como pueden ser with agressive water like reverse osmosis, salt water and
sistemas de osmosis inversa, agua salada y agua con cidos water with acids.
en disolucin.
Construction:
Caractersticas constructivas: Impellers, diffusers, shaft, external cladding and in-
Turbinas, difusores, eje, camisa externa y cmaras inter- termediate chambers, suction-drive base entirely in
medias, base aspiracin-impulsin, ntegramente en acero AISI 316 stainless steel. Upper body in high strength
inoxidable AISI 316. Cuerpo superior en fundicin de alta cast iron not in contact with the pumped liquid.
resistencia no en contacto con el lquido.
Motor:
Motor: Sealed asynchronous with external ventilation, suitable
Motor asncrono, tipo cerrado y de ventilacin externa, for continuous work. IP-55 protection, class F insulation,
apto para trabajo continuo. Grado de proteccin IP-54, aisla- at 2,850 rpm. Single phase versions at 230 V include a
miento clase F, a 2.850 r.p.m. Los modelos monofsicos a thermal protector and permanent capacitor.
230 V incorporan un protector trmico y condensador perma-
nente. Maximum water temperature . . . . -15 C to +120 C
Maximum ambient temperature . . . . . . . . . . . . 40 C
Temperatura del lquido a bombear . . . . -15 C a +120 C Maximum working pressure: . . . . . . . . . . . . . . 25 bar
Temperatura mxima ambiente . . . . . . . . . . . . . . . . . 40 C
Presin mxima de ejercicio: . . . . . . . . . . . . . . . . . . 25 bar
36
Verticales Multicelulares Inoxidable. AISI 316
Serie SSV-F
VAT-127 L
VAT-163 L
Aplicaciones:
Bombas centrfugas multicelulares verticales, muy adecuadas VAT-205
para formar equipos con variador de frecuencia. Bombas silen-
ciosas y de un gran rendimiento hidrulico.
39
Bombas Serie Domstica
Equipos Presin Domsticos
Serie SIGMA 42
Serie JET 44
Serie AP 45
D
Serie PE 46
41
Centrfugas
Serie SIGMA
VED
NO
2014
D
NOVEDAD
NEW
2
014
Aplicaciones: Applications:
Las bombas horizontales multicelulares de la serie SIGMA, por The multistage horizontal pumps SIGMA series, through
su elevado rendimiento y funcionamiento EXTREMADAMENTE their high output and EXTREMELY SILENT operation, are
SILENCIOSO, son especialmente indicadas para su uso en particularly recommended for the use in domestic and in-
equipos de presin, tanto de uso domestico como industriales. dustrial pressuring systems.
Tipo / Type A B C D
Aplicaciones: Applications:
Bomba autoaspirante con ptima capacidad de aspiracin A self-priming pump with optimal suction capacity
incluso en presencia de gas en el agua. even when there is gas in the water.
Particularmente indicada para el empleo en grupos de pre- Especially recommended for use in domestic pressure
sin domsticos con aspiracin negativa, pequeos riegos y units with negative suction, small irrigation installations
jardines, etc. Para aspiraciones superiores a 4 mts. instalar and gardens, etc. For suctions of over 4 metres, install
tuberas de aspiracin de mayor dimetro al indicado. suction piping of a larger diameter than that indicated.
Aplicaciones: Applications:
Bomba centrfuga autoaspirante para aspiracin profunda A self-priming pump for deep suction up to 27 metres
hasta 27 metros, por mediacin de un inyector. Idnea para by means of an injector. Ideal for 4 wells or larger.
pozos de 4 o mayores.
Construction:
Caractersticas constructivas: Pump body and motor support in grey cast iron with
Cuerpo y soporte en fundicin gris, con tratamiento antico- rust-proofing even on the interior surface, impellers
rrosivo incluso en su superficie interna, turbinas y difusor diffuser, and Venturi in technopolymer-A. Shaft in stain-
interno Venturi en tecnopolmero-A, eje en acero inoxidable less steel and mechanical seal in carbon ceramic. The
y cierre mecnico en cermica-carbn. El modelo AP 10.2 es AP 10.2 is single impeller and the AP 15 and AP 25 are
monoturbina y los modelos AP 15 y AP 25 biturbina. Tem- double impeller.
peratura del lquido a bombear de 0 C a +40 C. Mxima Temperature of the liquid to be pumped from 0 C to +
temperatura ambiente +40 C. Mxima presin de trabajo 40 C. Maximum ambient temperature + 40 C. Maxi-
8 Kg./cm2. mum working pressure 8 Kg/cm2.
Motor: Motor:
Asncrono, cerrado y de ventilacin externa. Proteccin Sealed asynchronous with external ventilation. Built-in
termo-amperimtrica incorporada y condensador fijo en la thermo-amperimetric protection and fixed capacitor in
versin monofsica. Grado de proteccin IP-44, segn nor- the single phase versions. IP-44 protection according to
mativa CEI a 2.850 r.p.m., 50 Hz. CEI standard at 2,850 rpm, 50 Hz.
PE 38
Aplicaciones: Applications:
Las electrobombas perifricas monobloc serie PE, son parti- The PE series peripheral single block electropumps are
cularmente indicadas para servicios en los que sea necesario particularly recommended for services requiring a high
una presin elevada y un caudal limitado. Son tambin indi- pressure and limited flow. They are also recommended
cadas para pequeos equipos de presin. El agua debe estar for small pressure units. The water must be sand-free.
libre de arena.
Construction:
Caractersticas constructivas: Pump body and motor support in cast iron. Impeller in
Cuerpo y soporte bomba-motor en fundicin. Turbina en bronze. Stainless steel shaft and mechanical seal in si-
bronce. Eje de acero inoxidable, sello mecnico en carbono licon carbide.
de silicio. MAXIMUM WATER TEMPERATURE: 70 C .
TEMPERATURA MAXIMA DEL AGUA: 70 C.
Motor:
Motor: Sealed electric with external ventilation. The single
Motor elctrico cerrado de ventilacin externa. La versin mo- phase version includes a thermal protector and perma-
nofsica incorpora protector trmico y condensador perma- nent capacitor. IP-44 protection. Type B insulation.
nente. Grado de proteccin IP-44. Aislamiento Tipo B.
46
Sumergibles de Achique
Serie NOVA - NOVA SALT - FEKA
NOVABOX
Aplicaciones:
SERIE NOVA - FEKA: Electrobomba sumergible domstica
Applications:
NOVA - FEKA SERIES: A submersible domestic elec-
D
que por su forma compacta y manejable es ideal para su uso tropump, whose compact, easy-to-handle form is ideal
fijo y porttil. Bomba idnea para achique de filtraciones en for its fixed and portable use. The ideal pump for ba-
bodegas, garajes, stanos, vaciado de piscinas, etc. ling filtrations in cellars, garages, basements, emptying
SERIE NOVA SALT: Electrobomba sumergible domstica con pools, etc.
interruptor de nivel incluido, apta para el trabajo con agua sa- FEKA NOVA SALT: Domestic submersible pump with
lada, lo cual la hace idnea para achique de salmuera, piscinas float switch included, suitable for work with salt water,
de agua salada, etc which makes it ideal for drainage of brine, salt water
NOVABOX: Estacin elevadora automtica de aguas ligera- pools, etc
mente cargadas domsticas prodecentes de baeras, lavabos, NOVABOX: An automatic raising station for lightly
duchas y lavaderos situados en semistanos o bien por debajo loaded household waters from baths, washbasins,
del nivel de la red de alcantarillado. Est construido por una showers and washers in semi basements or below the
electrobomba Nova 300 M aut. con 5mts. de cable y enchufe drainage network. It comprises a Nova 300 M aut. Elec-
instalado en un contenedor de tecnopolmero con una capaci- tropump, with 5 metres of cable and a switch installed
dad de 30 litros y una vlvula antirretorno en la impulsin. La in a 30 litre techno polymer container and a non return
estacin de elevacin se entrega con una bomba ya ensam- valve in the drive. The raising station is delivered with a
blada y lista para su funcionamiento totalmente automtico. pump already assembled and ready for fully automated
working.
Caractersticas constructivas:
Cuerpo bomba, turbina y filtro de aspiracin en tecnopolmero Construction:
hidroresistente, tornillera y eje en acero inoxidable, triple cierre Pump body, impeller and suction filter in water-resistant
mecnico y anillo separador con cmara de aire. techno polymer, bolts and shaft in stainless steel. Triple
mechanical seal and separator ring with air chamber.
Motor:
Sumergible, asncrono. El estator est dentro de una cmara Motor:
hermtica de acero inoxidable. Proteccin termo-amperim- Submergible, asynchronous. The stator is inside a sealed
trica y condensador fijo incorporado en versiones monofsicas. chamber in stainless steel. Thermo-amperimetric protec-
Grado de proteccin IP-68. Aislamiento clase F. tion and fixed capacitor built in to single phase versions.
Incluye 5 metros de cable. IP-68 protection. Class F insulation.
TEMPERATURA MAXIMA DEL AGUA: 40 C. Includes 5 meters of electric wire.
INMERSION MAXIMA: 7 mts. MAXIMUM WATER TEMPERATURE: 40 C.
MAXIMUM IMMERSION: 7 metres.
Aplicaciones: Applications:
Bomba sumergible multiturbina de 6 para trabajo con agua 6 multistage submersible pump capable to work with
limpia, ideal para el empleo en sistemas de agua pluvial y clean water, ideal for use in storm water systems and
redes de riego, para bombeo de agua desde depsitos, es- irrigation networks, pumping water from tanks, ponds,
tanques, pozos, y en lugares donde se requiera una presin wells, and in places where high pressure is required.
alta.
Construction:
Caractersticas constructivas: Pump body, turbines and diffusers in polypropyle-
Cuerpo bomba, turbinas y difusores en polipropileno-polie- ne-polyethylene, NBR O-rings, motor casing in cast
tileno, juntas tricas en NBR, carcasa motor en hierro, eje iron, motor shaft and ceramic ferrule in stainless steel
motor y casquillo cermico en acero inoxidable AISI-416. AISI-416. It is equipped with a float switch for auto-
Est equipada de un interruptor de flotador para el arran- matic start and stop the pump, and check valve on
que y parada automtica de la bomba, y vlvula de reten- the discharge.
cin en la impulsin.
Motor:
Motor: 230V/50Hz Single phase with capacitor and thermal
Monofsico 230V/50Hz, con condensador y proteccin tr- protection built.
mica incorporado. IP68 protection and Class F insulation
Grado de proteccin IP68 y aislamiento clase F. It comes equipped with 15 meters of electrical
Equipa 15 metros de cable elctrico. cable.
Inmersin mxima: 10 metros. Maximum immersion: 10 meters.
48
Bombas para Fuentes Decorativas y Acuarios
Serie PUMP
D
PUMP 2800 - 1200 - 700
Aplicaciones: Applications:
Electrobomba sumergida para pequeas aplicaciones como Submergible electropumps for small applications, such
pueden ser: Acuarios, fuentes, surtidores, refrigeracin de as: aquariums, fountains, jets, cooling cutting machi-
mquinas de corte, etc... nes, etc.
Bombas aptas para trabajos con agua salada. Ideales para Pumps suitable for work with salt water. Ideal for inter-
uso intermitente o bien continuo provistas de regulacin de mittent or continuous use. Adjustable water flow.
caudal, para adaptarlas a diferentes aplicaciones y usos. Voltage 230 V, 50 Hz.
Voltaje 230 V, 50 Hz. PUMP 400-1150 Series:
Serie PUMP 400-1150: Exceptional hydraulic performance with low energy
Excepcionales prestaciones hidrulicas con bajo consumo consuption.
elctrico. Puede trabajar con muy pocos centmetros de nivel PUMP 700-1200-2800 Series:
de agua. Includes filter sponge. Equipped with tube connec-
Serie PUMP 700-1200-2800: tors for non submerged use.
Incluyen cartucho filtrante en la aspiracin. Pueden tra- Construction:
bajar sin estar sumergidas mediante el uso de los racores Single direction, compact patented impeller, highly ab-
proporcionados de serie. sorbent damper, built using rustproof materials able to
Caractersticas Constructivas: withstand chemical agents, for a variety of industrial
Turbina patentada uni-direccional y compacta, amortiguador applications.
de gran poder de absorcin, construidos con materiales an-
ticorrosivos y resistentes a agentes qumicos para diversas
aplicaciones industriales.
Tipo ALTURA MX. CAUDAL MX. CONSUMO W. SALIDA Largo Ancho Alto
Type MAX. HEIGHT MAX. FLOW CONSUMPTION W. Hose Length Width Height
Serie OPTIMA 52
Serie WINNER 54
Serie MAGNUS 58
E
Serie VERT MAGNUS 59
Serie KONTRA 65
Serie POOLMATIC 66
Serie HPE 67
Serie PREFILTROS 68
51
Autoaspirante para Piscinas
Serie OPTIMA
Aplicaciones: Applications:
Bomba autoaspirante para piscinas con prefiltro incorpo- Self primming pump for swimming pools with a large
rado que junto a las excelentes prestaciones hidrulicas que pre-filter, which together with its excellent hydraulic
ofrece, genera una altsima capacidad de filtracin. Filtro con performance, generates a very large filtering capacity.A
tapa transparente que permite observar fcilmente el interior filter with a transparent polycarbonate lid that easily
del prefiltro. Cesto prefiltro de grandes dimensiones. Imposi- allows inspection of the interior of the pre-filter basket.
Large dimensions pre-filter basket.No possible elec-
bilidad de comunicacin elctrica con el agua, ya que ninguna
trical communication with the water as no part of the
parte del motor est en contacto con el lquido bombeado.
motor is in contact with the water.
Especialmente adecuada para trabajo con agua de mar.
Specially suitable for work with sea water.
Dos posibilidades de conexin: Two possibilities for the connection of the pipes:
- Conexin rosca hembra de 11/2 - Female threat 11/2
- Conexin para tubo de PVC de 50 para encolar. - PVC glue connections 50
(Se suministran los enlaces rpidos) (Fast PVC connectors are supplied with the pump)
OPTIMA 100 M/T 1 0,75 20/- 5,5 3,4 2 18 16 15,3 13 10,5 7,6
E IN SP
AI
MA
by
Saci
N
Pumps
2 0 16
Aplicaciones: Applications:
E
El nuevo sistema electrnico SMART Control aplicable a la The new electronic system for pumps SMART Control
serie Optima es un sistema de control integral de la insta- applicable to the Optima Series is an integral system
lacin. Mediante el cuadro elctrico digital que incorpora to command the installation. By attaching a digital swit-
la bomba, nos permite una instalacin fcil e intuitiva y un chboard control panel to the pump, allows an easy and
control completo de la piscina, ya que incorpora las protec- intuitive installation and complete control of the pool.
ciones necesarias para la bomba y para las personas, relojes The system incorporates the necessary protections for
the pump and for people, time clocks and entries/exits
programadores y entradas/salidas para el control y gestin
for the management of the lighting system, salt chlori-
de sistema de iluminacin, Clorador salino, Bomba de Calor,
nator, heat pump, temperature probe, etc.
sonda de temperatura, etc...
The system replaces the traditional control panel,
El sistema sustituye al cuadro elctrico tradicional, e in- and incorporates some new features:
corpora algunas nuevas capacidades: Clock programmer for fi ltration cycle.
Reloj programador de ciclo de filtracin. Clock Programmer for lighting cycle.
Reloj programador de ciclo de iluminacin. Ampre Control for overconsumption.
Control amperimtrico por sobreconsumo. Programmable input for heat pump.
Entrada programable para bomba de calor. Anti freezing control system programmable
Sistema de control anti congelacin a travs de sonda through PT100 probe.
PT100 programable. Output for control of lights.
Salida para control de focos. Output for salt chlorinator or running pump.
Salida para clorador salino o indicador de bomba en marcha. Audible alarm for fault monitoring.
Alarma sonora integrada para control de fallos. Control of lack of water / dry running.
Control de falta de agua / trabajo en seco. Lights button for Manual ignition, build in count-
Botn encendido manual de focos, con cuenta atrs incor- down with the following ranges: 15 min, 30 min, 60
porada con los siguientes rangos: 15 min, 30min, 60 min, min, 60 min, 2 h, 4 h, 8 h.
Totalizer of working hours, total/partial.
2 h, 4 h, 8 h.
Failures and incidents historic list.
Totalizador de horas de funcionamiento, total/parcial.
Notifi cations for sand fi lter and basket cleaning.
Histrico de registro de fallos.
Notifi cations of maintance based on working
Avisos de limpieza de fi ltro de arena y cesto. hours.
Aviso de mantenimiento por horas de trabajo.
SMART OPTIMA 100 M 1 0,75 20/- 5,5 18 16 15,3 13 12,1 10,5 9,7 7,6
53
Autoaspirante para Piscinas
Serie WINNER
Applications:
A self-priming pump for pools with a large prefilter to
generate a very high filtration capacity. A filter with a
transparent Polycarbonate lid to be able to easily see
the interior of the prefilter basket. No possible electric
Aplicaciones: contact with the water as no part of the motor is in
Electrobomba autoaspirante para piscinas, con prefiltro incor- contact with it.
porado de grandes dimensiones, lo que genera una altsima Large volume pre-filter basket to be able to offer high
capacidad de filtracin. quality filtering and not require the basket to be cleaned
Filtro con tapa transparente en policarbonato que permite constantly when the pool is excessively dirty. Pre-filter
observar fcilmente el interior del cesto prefiltro. lid key supplied standard with each pump, which allows
Imposibilidad de comunicacin elctrica con el agua, ya que effortless lid opening and great comfort as it is possible
ninguna parte del motor tiene contacto con el agua. to hold it with both hands.
Dos posibilidades de conexin: Two possibilities for the connection of the pipes:
- Conexin rosca hembra de 2 - Female threat 2
- Conexin para tubo de PVC de 63 para encolar. - PVC glue connections 63
(Se suministran los enlaces rpidos) (Fast PVC connectors are supplied with the pump)
Motor: Motor:
Motor asncrono, cerrado de ventilacin externa. Grado de Sealed asynchronous with external ventilation. IP-55
proteccin IP-55. 2.850 r.p.m. 50 Hz (60 Hz bajo demanda protection, 2,850 rpm, 50 Hz. Class F insulation.
excepto WINNER 300 M). Aislamiento clase F. MAXIMUM WATER TEMPERATURE: 40 C.
TEMPERATURA MAXIMA DEL AGUA: 40 C.
E IN SP
AI
MA
by
Saci
N
Pumps
2 0 16
Aplicaciones:
El nuevo sistema electrnico SMART Control aplicable a la
Applications:
The new electronic system for pumps SMART Control
E
serie Winner es un sistema de control integral de la insta- applicable to the Winner Series is an integral system to
lacin. Mediante el cuadro elctrico digital que incorpora command the installation. By attaching a digital swit-
la bomba, nos permite una instalacin fcil e intuitiva y un chboard control panel to the pump, allows an easy and
control completo de la piscina, ya que incorpora las protec- intuitive installation and complete control of the pool.
ciones necesarias para la bomba y para las personas, relojes The system incorporates the necessary protections for
the pump and for people, time clocks and entries/exits
programadores y entradas/salidas para el control y gestin
for the management of the lighting system, salt chlori-
de sistema de iluminacin, Clorador salino, Bomba de Calor,
nator, heat pump, temperature probe, etc.
sonda de temperatura, etc...
The system replaces the traditional control panel,
El sistema sustituye al cuadro elctrico tradicional, e in- and incorporates some new features:
corpora algunas nuevas capacidades: Clock programmer for fi ltration cycle.
Reloj programador de ciclo de filtracin. Clock Programmer for lighting cycle.
Reloj programador de ciclo de iluminacin. Ampre Control for overconsumption.
Control amperimtrico por sobreconsumo. Programmable input for heat pump.
Entrada programable para bomba de calor. Anti freezing control system programmable
Sistema de control anti congelacin a travs de sonda through PT100 probe.
PT100 programable. Output for control of lights.
Salida para control de focos. Output for salt chlorinator or running pump.
Salida para clorador salino o indicador de bomba en marcha. Audible alarm for fault monitoring.
Alarma sonora integrada para control de fallos. Control of lack of water / dry running.
Control de falta de agua / trabajo en seco. Lights button for Manual ignition, build in count-
Botn encendido manual de focos, con cuenta atrs incor- down with the following ranges: 15 min, 30 min, 60
porada con los siguientes rangos: 15 min, 30min, 60 min, min, 60 min, 2 h, 4 h, 8 h.
Totalizer of working hours, total/partial.
2 h, 4 h, 8 h.
Failures and incidents historic list.
Totalizador de horas de funcionamiento, total/parcial.
Notifi cations for sand fi lter and basket cleaning.
Histrico de registro de fallos.
Notifi cations of maintance based on working
Avisos de limpieza de fi ltro de arena y cesto. hours.
Aviso de mantenimiento por horas de trabajo.
SMART WINNER 75 M 0,75 0,55 20 4,75 19,5 18 15,7 13,5 10,8 7,9
2 2
SMART WINNER 100 M 1 0,75 25 5,5 23,2 21,1 19,7 18 15 12,3 8,7 & &
SMART WINNER 150 M 1,5 1 30 7,3 27 25 23 21 19 17 14 10
63PVC 63PVC
SMART WINNER 200 M 2 1,5 40 9,2 28 26 24 21 18 14 12
55
Autoaspirante para Piscinas
Serie [e] WINNER
Al incorporar un software desarrollado especialmente para The software is specially developed for the auto-
la automatizacin de la bomba [e] winner, se ha dispuesto mation of [e] winner pump, an easy setup wizard is
un sencillo men previo. Para que su bomba bomba y su provided to leave the pump and the installation fully
instalacin sea totalmente operativa. operational.
56
Autoaspirante para Piscinas
Serie [e] WINNER
Extremadamente Silenciosa, ( 40 dB). Total adaptability, speed range from 600 rpm to 3,000 rpm. The pump
automatically sets to the point of maximum savings.
Adaptabilidad total, rango de velocidades de 600
rpm a 3.000 rpm. La bomba se adapta autom- Great versatility, one single model to any size of pool from 15m3 to
ticamente a la situacin de mximo ahorro. 450 m3. Not necessary to have different pumps, our [e] winner is able to
Alta Proteccin, Los lmites introducidos du- Large LCD display where all necessary information is clearly reflected.
rante la programacin protegen su bomba, su
instalacin, su filtro y a los usuarios.
WINNER 150 M 1,5 2.850 ASINCRONO 80 20 4,00 1,10 1,10 88% 1.606 640 550
[e] WINNER 300 3 800 BRUSHLESS IPM 80 9 8,89 0,06 0,06 88% 195 90 550
WINNER 100 M 1 2.850 ASINCRONO 50 15 3,33 0,65 2,17 85% 791 297 241
[e] WINNER 300 3 600 BRUSHLESS IPM 50 6 8,33 0,04 0,33 85% 122 56 241
57
Centrfugas Autoaspirante para Piscinas
Serie MAGNUS
1.450 r.p.m. de 3 a 10 HP
2.850 r.p.m. 12,5 y 15 HP
Aplicaciones: Applications:
Bomba extremadamente silenciosa dado que gira a 1.450 Extreamly silent pump, at 1,450 rpm until 10HP.
rpm hasta 10CV. High flow self priming pump with motors at 1.450 rpm
Bomba autoaspirante de gran caudal con motores de 1.450rpm & 2.850 rpm, designed for big filtration installations.
y 2.850 rpm ideal para grandes equipos de filtracin. Incorpora Equipped with a big capacity strainer in the inlet that
un prefiltro en la aspiracin de grandes dimensiones, que junto among its excellent performance generates a high
a las excelentes prestaciones hidrulicas que ofrece, genera filtration capacity. Prefilter with a transparent lid that
una altsima capacidad de filtracin. allows easy inspectionof the basket. No possible elec-
Filtro con tapa transparente en policarbonato que permite trical contact with the water as no part ofthe motor is
observar fcilmente el interior del cesto prefiltro. open to it.
Imposibilidad de comunicacin elctrica can el agua, ya que
ninguna parte del motor tiene contacto con el liquido bom- Constructive Characteristics:
beado. Prefilter, Pump body, Volut, Base & pump body lid in
poly-propylene resistant to Chemicals products used in
Caractersticas Constructivas: pool sand reinforced with fiber glass. Prefilter basket in
Cuerpo Prefiltro, Cuerpo bomba, Voluta, Base y Tapa cuerpo poly-thene. Strainer lid in polycarbonate with a closing sys-
bomba en polipropileno resistente a los productos qumicosde tem using four handles. Noryl impeller in MAGNUS-4 300
las piscinas, y reforzado con fibra de vidrio. Cesto prefiltroen & 400. Noryl or Bronze impeller in MAGNUS-4 550, 750
polietileno. Rodete en Noryl Bronce. Tapa prefiltro en poli- & 1000. Bronze impeller in MAGNUS-2 1250 & 1500.
carbonato con sistema de cierre con cuatro pomos. Rodete de Mechanical seal in AISI-316 (ready to work with sea
Noryl en MAGNUS-4 300 y 400. Rodete de Noryl o Bronce water). Nuts and bolts in stainless steel AISI 304. Shaft in
en MAGNUS-4 550, 750 y 1000. Rodete de Bronce en MAG- stainless steel in AISI-316.
NUS-2 1250 y 1500. Sello mecnico en acero inoxidable
AISI-316 (permite trabajo con agua de mar). Tornilleria ena- Motor:
cero inoxidable AISI 304. Eje en acero inoxidable AISI-316. Standard Asynchronous motor, sealed with external ven-
tilation. Protection IP-55. Isolation class F. 1,450 rpm &
Motor: 2,850 rpm. Double frequency 50Hz y 60 Hz. Motor bea-
Motor asncrono cerrado de ventilacin externa. Grado de pro- rings greased for life and selected to ensure long duration
teccin IP-55. Aislamiento clase F. 1.450 rpm y 2.850 rpm. Do- and silent working.
ble frecuencia 50 Hz y 60 Hz. Rodamientos engrasados de por
vida, garantizando una larga duracin y un trabajo silencioso.
1.450 r.p.m. de 3 a 10 HP
2.850 r.p.m. 12,5 y 15 HP
Aplicaciones: Applications:
Bomba extremadamente silenciosa dado que gira a 1.450 Extreamly silent pump, at 1,450 rpm until 10HP.
rpm hasta 10CV.
Bomba autoaspirante de gran caudal con motores de 1.450rpm
y 2.850 rpm ideal para grandes equipos de filtracin. Incorpora
High flow self priming pump with motors at 1.450 rpm
& 2.850 rpm, designed for big filtration installations.
Equipped with a big capacity strainer in the inlet that
E
un prefiltro en la aspiracin de grandes dimensiones, que junto among its excellent performance generates a high
a las excelentes prestaciones hidrulicas que ofrece, genera filtration capacity. Prefilter with a transparent lid that
una altsima capacidad de filtracin. allows easy inspectionof the basket. No possible elec-
Filtro con tapa transparente en policarbonato que permite trical contact with the water as no part ofthe motor is
observar fcilmente el interior del cesto prefiltro. open to it.
Imposibilidad de comunicacin elctrica can el agua, ya que nin-
guna parte del motor tiene contacto con el liquido bombeado. Constructive Characteristics:
Pump body, volut, base and pump body lid in poly-propi-
Caractersticas Constructivas: lene resistant to Chemicals products used in pool sand
Cuerpo bomba, Voluta, Base y Tapa cuerpo bomba en poli- reinforced with fiber glass. Prefilter in stainless steel AISI-
propileno resistente a los productos qumicosde las piscinas, 316 (cast iron on request). Prefilter basket in poly-thene.
y reforzado con fibra de vidrio. Prefiltro en acero inoxidable Strainer lid in polycarbonate with a closing system using
AISI-316 (en fundicin de hierro bajo demanda). Cesto prefiltro four handles. Noryl impeller in VERT MAGNUS-4 300 &
en polietileno. Rodete en Noryl Bronce. Tapa prefiltro en 400. Noryl or Bronze impeller in VERT MAG-NUS-4 550,
policarbonato con sistema de cierre con cuatro pomos. Rodete 750 & 1000. Bronze impeller in VERT MAGNUS-2 1250
de Noryl en VERT MAGNUS-4 300 y 400. Rodete de Noryl & 1500. Mechanical seal in AISI-316 (ready to work with
o Bronce en VERT MAGNUS-4 550, 750 y 1000. Rodete de sea water). Nuts and bolts in stainless steel AISI 304.
Bronce en VERT MAGNUS-2 1250 y 1500. Sello mecnico Shaft in stainless steel in AISI-316.
en acero inoxidable AISI-316 (permite trabajo con agua de
mar). Tornilleria enacero inoxidable AISI 304. Eje en acero Motor:
inoxidable AISI-316. Standard Asynchronous motor, sealed with external ven-
tilation. Protection IP-55. Isolation class F. 1,450 rpm &
Motor: 2,850 rpm. Double frequency 50Hz y 60 Hz. Motor bea-
Motor asncrono cerrado de ventilacin externa. Grado de rings greased for life and selected to ensure long duration
proteccin IP-55. Aislamiento clase F. 1.450 rpm y 2.850 rpm. and silent working.
Doble frecuencia 50 Hz y 60 Hz. Rodamientos engrasados de
por vida, garantizando una larga duracin y un trabajo silencioso.
Aplicaciones: Applications:
Bomba centrifuga de gran caudal con motor a 2.850 r.p.m., A large volume centrifugal pump, to which a pre-filter
que incorporan un prefiltro en la aspiracin, lo cual hace de has been applied in the inlet, making these the ideal
ellas la bomba ideal para grandes equipos de filtracin. pumps for large filtering units for swimming pools.
Aplicaciones: Applications:
E
Bomba centrifuga de gran caudal y gran altura de elevacin A large volume and pressure centrifugal pump, to which
con motor a 2.850 r.p.m., que incorporan un prefiltro en la a pre-filter has been applied in the inlet, making these
aspiracin, lo cual hace de ellas la bomba ideal para grandes the ideal pumps for large filtering units for swimming
equipos de filtracin. pools.
Constructive Characteristics:
Caractersticas constructivas:
Pump body, pre-filter, coupling and impeller in cast iron.
Cuerpo bomba, soporte, prefiltro, acoplamiento y turbina en
Shaft and pre-filter basket in AISI 316 stainless steel.
fundicin de hierro de alta calidad con un pretratamiento de
Mechanical seal in carbon-ceramic. On request, the
pintura epoxi-poliester y secado al horno para darle ms du-
impeller may be in bronze and the mechanical seal in
rabilidad y resistencia a la oxidacin, sello mecnico en cer- silicium carbide or tungsten carbon.
mica carbn,eje y cesto prefiltro en acero inoxidable AISI-316.
Bombas monobloc que equipan un motor normalizado a tra- Motor:
vs de un acoplamiento eje-bomba motor. Standard asynchronous motor, sealed from external ven-
Bajo demanda pueden suministrarse con turbina de tilation. Its standard construction allows it to be re-
bronce. placed with another standard motor at any time and
in any place. Protection IP-54. 2,850 rpm. 50-60 Hz.
Motor: Another advantatge, is that totally standard spare mo-
Motor asncrono standard, cerrado de ventilacin externa, tors are available anywhere in the world, at any time
apto para trabajo continuo. and of any brand.
Grado de proteccin IP-55. Aislamiento clase F (calen-
tamiento B) tropicalizados a 2.850 r.p.m. 50 Hz y bajo
demanda 60 Hz y otras tensiones.
Aplicaciones: Applications:
Bomba centrfuga de gran caudal con motor a 1.450 r.p.m., A large volume centrifugal pump, to which a pre-filter
que incorporan un prefiltro en la aspiracin, lo cual hace de has been applied in the inlet, making these the ideal
ellas la bomba ideal para grandes equipos de filtracin. pumps for large filtering units. The fact that the pump
El hecho de que la bomba funcione con un motor de 1.450 works with a 1,450 rpm. motor makes it very quiet and
r.p.m. la hace muy silenciosa y de larga durabilidad. long lasting.
Motor: Motor:
Motor asncrono standard, cerrado de ventilacin externa, Standard asynchronous motor, sealed from external
apto para trabajo continuo. ventilation. Its standard construction allows it to be re-
Grado de proteccin IP-55. Aislamiento clase F (calen- placed with another standard motor at any time and in
tamiento B) tropicalizados a 1.450 r.p.m. 50 Hz y bajo any place. Protection IP-55. 1,450 rpm. 50-60 Hz.
demanda 60 Hz y otras tensiones.
E
Aplicaciones: Applications:
Bomba centrfuga de gran caudal y gran altura de eleva- A large volume and pressure centrifugal pump, to which
cin con motor a 1.450 r.p.m., que incorporan un prefiltro a pre-filter has been applied in the inlet, making these
en la aspiracin, lo cual hace de ellas la bomba ideal para the ideal pumps for large filtering units. The fact that
grandes equipos de filtracin. El hecho de que la bomba fun- the pump works with a 1,450 rpm. motor makes it
cione con un motor de 1.450 r.p.m. la hace muy silenciosa y very quiet and long lasting. Under demand we can
de larga durabilidad. provide these pumps with bronze impeller.
Motor: Motor:
Motor asncrono standard, cerrado de ventilacin externa, Standard asynchronous motor, sealed from external
apto para trabajo continuo. Grado de proteccin IP-55. Ais- ventilation. Its standard construction allows it to be re-
lamiento clase F (calenta-miento B) tropicalizados a 1.450 placed with another standard motor at any time and in
r.p.m. 50 Hz y bajo demanda 60 Hz y otras tensiones. any place. Protection IP-55. 1,450 rpm. 50-60 Hz.
Aplicaciones: Applications:
Bomba centrfuga en bronce marino de gran caudal con A large volume centrifugal pump, to which a pre-filter
motor a 2.850 r.p.m., que incorporan un prefiltro en la as- has been applied in the inlet, making these the ideal
piracin, lo cual hace de ellas la bomba ideal para grandes pumps for large filtering units. The bronze version is
equipos de filtracin, especialmente en instalaciones con ideal for sea water and automatic pool systems that use
agua de mar. salt electrolysis as a means of disinfecting.
En los modelos de 3 y 4 CV recomendamos la instalacin con tubo de 90 mm. (For 3-4 HP we recomend minimum 90 mm. pipe)
* Voltaje de Serie 400/690 V (bajo demanda 230/400 V) / *Standard voltage 400/690 V (under demand 230/400 V)
1.450 r.p.m. de 3 a 10 HP
2.850 r.p.m. 12,5 y 15 HP
E
Aplicaciones: Applications:
Bomba extremadamente silenciosa dado que gira a 1.450 rpm Extreamly silent pump, at 1,450 rpm until 10HP.
hasta 10CV. Centrifugal pumps with a high flow capacity genera-
Bomba centrfuga que gracias al gran caudal que genera a ted alow pressure, makes it the ideal pumps for a lot
bajas presiones, la hace idonea para muchos tipos de insta- of types of installations likes cooling installations, big
laciones, como instalaciones de refrigeracin, trasvase, etc... transfers, etc...
Imposibilidad de comunicacin elctrica con el agua, ya que No possible electrical contact with the water as no part
ninguna parte del motor tiene contacto con el liquido bom- of the motor is open to it.
beado.
Constructive Characteristics:
Caractersticas Constructivas: Pump body, Volut, Base & pump body lid in polypro-
Cuerpo bomba, Voluta, Base y Tapa cuerpo bomba en po- pylene resistant to Chemicals products used in pools and
lipropileno resistente a los productos qumicos de las pis- reinforced with fiber glass. Strainer lid in polycarbonate
cinas, y reforzado con fibra de vidrio. Rodete de Noryl en with a closing system using four handles. Noryl impeller
KONTRA-4 300 y 400. Rodete de Noryl o Bronce en in KONTRA-4 300 & 400. Noryl or Bronze impeller in
KONTRA-4 550, 750 y 1000. Rodete de Bronce en KONTRA-4 550, 750 & 1000. Bronze impeller in
KONTRA-2 1250 y 1500. Cierre mecnico en acero inoxi- KONTRA-2 1250 & 1500. Mechanical seal in stain-
dable AISI-316. Tornilleria en acero inoxidable AISI 304. less steel AISI-316. Nuts and bolts in stainless steel
Eje en acero inoxidable AISI-316 (permite trabajo con AISI-316 (ready to work with sea water).
agua de mar).
Motor:
Motor: Standard Asynchronous motor, sealed with external
Motor asncrono cerrado de ventilacin externa. Grado de ventilation. Protection IP-55. Isolation class F. 1,450
proteccin IP-55. Aislamiento clase F. 1.450 rpm y 2.850 rpm y 2,850 rpm. Double frequency 50 Hz y 60 Hz.
rpm. Doble frecuencia 50 Hz y 60 Hz. Rodamientos engrasa- Motor bearings greased for life and selected to ensure
dos de por vida, garantizando una larga duracin y un trabajo long durration and silent working.
silencioso.
Aplicaciones: Aplications:
Bombas centrifugas multicelulares horizontales, extremadamente Multistage centrifugal pump, extremely silent a spcecially
silenciosa especialmente concebida para trabajar con limpiafondos designed to work with automatic pool cleaners. This pump
automticos ya sea en piscinas con agua clorada como con agua can be used rather with chlorinated water or with pools
tratada con electrolisis salina. treated with salt electrolisis.
E
Aplicaciones: Applications:
Bombas diseadas para baos de burbujas y piscinas, trata- Pumps designed for bubble baths and swimming pools,
miento de aguas, secado de coches, ventilacin/aspiracin water treatment, car drying, ventilation / dust extrac-
de polvo, etc tion, etc ...
Serie F
Serie V
Generalidades: Generals:
Bridas de entrada y salida segn norma DIN 2501 con cone- Inlet and outlet clamps according to DIN 2501 with con-
xiones a partir de DN 65 (21/2) hasta DN 200 (8) provistos nections from DN 65 (21/2) to DN 200 (8) with 3-4 clo-
de 3-4 pomos de cierre (segn modelos) para la perfecta es- sing handles (depending on model) for a perfect lid seal.
tanqueidad de la tapa.
Constructives characteristics :
Caractersticas constructivas: Pot and pre-filter lid in cast iron.With epoxy-polyester
Vaso y tapa prefiltro en fundicin de hierro con un pretra- paint. Prefilter basketand prefilter handels in stainless
tamiento de pintura epoxi-poliester y secado al horno para steel AISI 316.
darle ms durabilidad y resistencia a la oxidacin, con pomos
y cesta en acero inoxidable AISI-316.
Do
B
Di
Do
Di
De
Dt C
Ho
A
A
Hf
Hi
Ho
Agujeros
Tipo/Type Di Do Hi Ho A B C De Dt T
Holes
F 65/65 65 65 250 120 360 253 380 185 145 18 4
F 80/80 (4T) 80 80 250 120 360 253 380 200 160 18 4
F 80/80 (8T) 80 80 250 120 360 253 380 200 160 18 8
F 100/100 100 100 270 155 360 253 380 222 180 18 8
F 125/125 125 125 270 155 360 253 380 250 210 18 8
F 150/150 150 150 380 190 500 330 460 285 240 22 8
F 200/200 200 200 380 190 500 330 460 340 295 22 8
V 65/65 65 65 151 357 328 310 231 285 M16 M16 4
V 80/80 80 80 151 357 328 310 231 285 M16 M16 8
V 100/100 100 100 151 357 328 310 231 285 M16 M16 8
V 125/125 125 125 151 357 328 310 231 285 M16 M16 8
V 150/150 150 150 151 357 328 310 231 285 M20 M20 8
68
Prefiltros Sueltos Inox
Serie PREFILTROS INOX
E
Aplicaciones: Applications:
Filtros ntegramente en acero inoxidable para conexin a Filters of stainless steel to connect on pump. Equiped
bomba. Incorporan bridas norma DIN para facil unin con with DIN flanges for easy connection with pumps. In-
bombas centrfugas. Disponen de un cesto tambin en acero ternal stainless steel basket to prevent particles from
inoxidable para evitar la entrada de partculas al interior de entering the pump body.
cuerpo bomba.
There are different models with different flanges for
Existen diferentes modelos con diferentes bridas de each type of pump (see table below).
unin para cada tipo de bomba (ver tabla segn modelo).
Constructives characteristics:
Caractersticas constructivas: The Q series filters are manufactured in stainless
Los filtros de la serie Q estan construidos ntegramente steel AISI-316, for vertical pump assembly, to save
en acero inoxidable AISI-316, para montaje de bomba en ver- space in the installation. Suction horizontal and vertical
tical, lo cual ahorra mucho espacio. De aspiracin horizontal drive to connect the suction of the pump. Hatch for
e impulsin vertical para montar sobre la brida de aspiracin easy access to strainer.
de la bomba. Trampilla de facil acceso al prefiltro para su
limpieza.
A
DNI C
DNA
D
B
H2
H1
18
E
Aplicaciones: Applications:
Kit de filtracin formado por filtro soplado con vlvula selec- Filtration kit including a blown filter with valve, and a
tora + bomba de piscina, ideal para piscina privada, todo ello swimming pool pump, ideal for private pool, all moun-
montado sobre una bancada comn. ted on a common base.
Descripcin: Description:
Compacto y ligero. Light & Compact.
Designed specially for domestic pools.
Diseado bsicamente para piscina domestica.
6 way valve.
Vlvula lateral de 6 vas. Maximum working pressure: 2 bar / 200kPa / (29psi)
Presin Mxima de trabajo: 2 bar / 200kPa / (29psi) Pressure tested at: 3 bar / 300 kPa / (44psi)
Presin de prueba en fabrica: 3 bar / 300 kPa / (44psi) Maximum water temperature: 40C (104F)
Temperatura mxima del agua: 40C (104F) Maximum filtration speed: 50 m3/h/m2
Velocidad mxima de filtracin: 50 m3/h/m2 Diameter of sand grain: 0,5-0,8 mm
Dimetro del grano de arena: 0,5-0,8 mm Transparent lid for easy inspection of the sand bed.
Flow diffuser to assure uniform distribution of the
Tapa transparente para fcil inspeccin del lecho filtrante.
water on the sand bed.
Difusor de caudal para asegurar una distribucin uniforme Air release valve.
encima del lecho filtrante. Flange clamp connection allows 360 rotation of the
Purga de aire. valve.
El sistema de cierre con zuncho permite rotar la vlvula
360.
D C
E F
B
A
I-500 0,22 50 mm 10,80 m3/h 85 Kg 527 500 180 770 460 520
I-650 0,31 50 mm 15,30 m3/h 145 Kg 627 500 180 850 510 570
71
Bombas Dosificadoras Electrnicas
Serie PL - Kit Pool
PL Kit Pool
Serie DIVERNOX 74
Serie DIVER 75
Serie AR 76
Serie SP 80
Serie Radiales AS 84
Serie Semi-Axiales SX 86
73
Sumergibles Domsticas
Serie DIVERNOX
74
Sumergibles Domsticas
Serie DIVER
F
Caractersticas constructivas Construction:
Camisa exterior, asa, camisa interna motor, en acero inoxi- Exterior cladding, internal motor cladding in staninless
dable AISI 304. Eje en AISI 316. Soporte interiores motor en steel AISI 304. and shaft in staninless steel AISI 316.
latn estampado. Turbinas y difusores en Noryl con anillos impellers and difusors in Noryl with mechanical seal in
silicium carbide. equipped with 10 mts of cable.
de roce en acero inoxidable. Sello mecnico en carburo de
*It is recommended to install a retention valve in the
silicio. Equipada con 10 metros de cable.
drive.
*Se recomienda la instalacin de una vlvula de retencin
en la impulsin. Motor:
Cladded hermetic stator.
Motor: Entirely in AISI 304 stainless steel.
Estator hermtico encamisado. Allows a maximum of 30 starts per hour .
Totalmente en acero inoxidable AISI 304. Maximun inmersion: 20 meters.
Permite un mximo de 30 arranques hora.
Inmersin mxima: 20 metros.
Aplicaciones: Applications:
Bombas sumergibles de 4 multiturbinas de elevado 4 submergible pumps with multiple impellers
rendimiento hidrulico especialmente indicadas para la with a high hydraulic performance, especially
elevacin, distribucin y presuizacin en instalaciones recommended for elevation, distribution and
hidrulicas civiles e industriales. Montaje en equipos de pressurisation in civil and industrial hydraulic ins-
presin, cisternas, sistemas de riego, de lavado, etc.... tallations. Assembly in pressure units, cisterns,
irrigation, washing systems, etc.
Caractersticas Constructivas:
Soporte y cuerpo superior ( con vlvula de retencin Construction:
incorporada) en Acero inoxidable AISI 304 de fundicin. Support and upper body (with built-in retention
Incorporan un nuevo sistema antibloqueo Turbina flo- valve) in cast AISI 304 stainless steel.
tante generan una resistencia absoluta al desgaste They incorporate a new Floating Impeller That
y mxima robustez y fiabilidad en el tiempo. generate and absolute resistance to wear
Turbinas en Noryl y difusores en policarbonato. Eje en and maximum solidity and reliability with time.
acero inoxidable AISI 304. Camisa exterior en acero Impellers and diffusers in Technopolymer A.
inoxidable AISI 304. Manguito gua superior interno en Exterior cladding in AISI 304 stainless steel.
caucho. Rejilla, cubre cable y vlvula de retencin en
acero inoxidable AISI 304. Motor:
We can choose between two types of motors:
Motor: FRANKLIN motor complying with DIN and ISO
Podemos escoger entre dos tipos de motor: standards with the following main features:
Motor FRANKLIN que cumple con la normativa DIN Hermetic stator in stainless steel, international
e ISO y cuyas caractersticas principales son: Estator NEMA coupling, no need for maintenance, water
hermtico en acero inoxidable, acoplamiento inter- lubricated.
nacional tipo NEMA, no necesita mantenimiento y
estn lubricados por agua. FR motor complying with DIN and ISO standards
with the following main features: Stator in stain-
Motor FR que cumple con la normativa DIN e ISO less steel, international NEMA coupling, no need
y cuyas caractersticas principales son: Estator de for maintenance, atoxic oil lubricated.
acero inoxidable en bao de aceite atxico, acopla-
miento internacional tipo NEMA, no necesita man- Maximum water temperature: + 40 C.
tenimiento.
Temperatura mxima del agua: + 40 C
77
Sumergibles 4
Serie AR
Impulsin: 2 - Outlet : 2
Impulsin: 2 - Outlet : 2
78
Sumergibles 4
Serie AR
Impulsin: 2 - Outlet : 2
13,7 2257
F
Impulsin: 2 - Outlet : 2
79
Sumergibles 4 en Acero Inoxidable AISI-304
Serie SP
Aplicaciones:
Bombas sumergibles de 4 multiturbinas de ele-
vado rendimiento hidrulico, especialmente indica-
das para la elevacin, distribucin y presurizacin
en instalaciones hidrulicas civiles e industriales.
Montaje en equipos de presin, cisternas, siste-
mas de riego, de lavado, etc....
Applications:
Caractersticas Constructivas: 4 submersible pumps with multiple impe-
Bombas sumergibles con turbinas, difusores, llers with a high hydraulic yield, especially
camisa, cuerpo aspiracin, cuerpo impulsin, cu- recommended for elevation, distribution and
brecables, rejilla de aspiracin y tornillos en acero pressurisation in civil and industrial hydraulic
inoxidable AISI-304. installations. Assembly in pressure units,
Vlvula de retencin de acero inoxidable incorpo- cisterns, irrigation, washing systems, etc.
rada.
Casquillos guas en goma especial resistentes a la Construction:
abrasin. Impellers, difusors, inlet and outlet body,
Turbinas equilibradas estticamente y dinmica- completely manufactured in stainless steel
mente. AISI-304. Guide ring in rubber resistent
Mximo contenido en arena 50 gr/m3. against abrasion. Static and dynamic balan-
Lmite de temp. del lquido: ced impellers. Maximum content of sand in
+15 C a + 40 C. water 50 gr./ m3.
Motor: Motor:
Podemos escoger entre dos tipos de motor: We can choose between two types of
motors:
Motor FRANKLIN que cumple con la normativa
DIN e ISO y cuyas caractersticas principales son: FRANKLIN motor complying with DIN
Estator hermtico en acero inoxidable, acopla- and ISO standards with the following main
miento internacional tipo NEMA, no necesita man- features: Hermetic stator in stainless steel,
tenimiento y estn lubricados por agua. international NEMA coupling, no need for
maintenance, water lubricated.
Motor FR que cumple con la normativa DIN e ISO
y cuyas caractersticas principales son: Estator en FR motor complying with DIN and ISO
acero inoxidable en bao de aceite atxico, aco- standards with the following main features:
plamiento internacional tipo NEMA, no necesita Stator in stainless steel, international NEMA
mantenimiento. coupling, no need for maintenance, atoxic oil
lubricated.
Temperatura mxima del agua: + 40 C
Maximum water temperature: + 40 C.
80
Sumergibles 4 en Acero Inoxidable AISI-304
Serie SP
81
Sumergibles 4 en Acero Inoxidable AISI-304
Serie SP
82
Sumergibles 4 en Acero Inoxidable AISI-304
Serie SP
Impulsin: 2 - Outlet : 2
Impulsin: 2 - Outlet : 2
83
Sumergibles 6 Radiales
Serie AS
Aplicaciones: Applications:
Bombas sumergibles para pozos de 6 mnimo, muy ade- Submergible pumps for 6 wells minimum, highly sui-
cuadas para aplicaciones civiles o industriales, en riegos por table for civil and industrial installations, in aspersion
aspersin, comunidades, urbanizaciones, etc irrigation, communities, housing estates, etc.
Eje, camisa, manguito, cubrecable, rejilla aspiracin aros y Shaft, cladding, sleeve, cable cover, suction grille, rings
tornillos son en acero inoxidable. and bolts in stainless steel.
Cuerpo de aspiracin e impulsin en acero inoxidable. Suction and drive body in stainless steel. Built-in stain-
Vlvula de retencin incorporada. less steel retention valve.
Motor: Motor:
Posibilidad de montaje con motor FRANKLIN y con Possibility to install with FRANKLIN or with SACI
motor SACI. motor.
Para potencias de hasta 10 CV el motor es de 4. A partir For powers of up to 10 HP, the motor is 4. From 10
de 10 CV los motores son de 6 y en todos los casos debe HP, the motors are 6 and, in all cases, must adapt to
especificarse el voltaje requerido. the required voltage.
84
Sumergibles 6 Radiales
Serie AS
Aplicaciones: Applications:
Electrobombas sumergibles de elevado rendimiento y Submergible electro pumps with high output and
mxima fiabilidad, aptas para grandes suministros, como maximum reliability, suitable for large supplies such as
pueden ser abastecimientos municipales, obras pblicas, municipal supplies, public works, industrial uses, large
usos industriales, grandes riegos, etc... irrigation, etc.
87
Sumergibles Semi-Axiales
Serie SX
88
Sumergibles Semi-Axiales
Serie SX
89
Sumergibles Semi-Axiales
Serie SX
90
Tuera Flexible para Bombas Sumergidas
Serie RYLBRUN
Racord de expansin
Aplicaciones: Applications:
La tubera flexible RYLBRUN est fabricada a base de ma- The RYLBRUN flexible pipe it is manufactured with very
teriales de alta calidad y resistencia, cuyas caractersticas, high quality and resistant material. Its charactherisitics
la hacen ideal para la instalacin de bombas sumergibles en makes it ideal for fast instalations of deep well pumps.
tiempo muy reducido, con mnimos medios humanos y m-
nimo despliegue de maquinaria para su instalacin. Charactheristics:
- Easy and fast to manipulate.
Caractersticas: - Easy to transport and store.
- Facilidad y rapidez en la manipulacin (montaje y desmon- - Long lasting instalation, no affected by corrosion.
taje). - Reduces water hammer impact.
- Facilidad de transporte y almacenamiento por su ligereza. - Improves performance.
- Larga duracin de la instalacin, no le afecta la corrosin. -Continuous without junctions, up to 500 meters.
- Reduce la prdida de carga y el golpe de ariete.
- Autoportante. No necesita elementos auxiliares de sujec-
cin.
- Continua. Hasta 500 metros de tubera en una sola pieza.
RYLBRUN 1 1/4 SIN ALETA 111/4 7.000 l/h 15 bar 2 x EXPANSIN 111/4
RYLBRUN 1 1/4 CON ALETA 111/4 7.000 l/h 30 bar 2 x EXPANSIN 111/4
RYLBRUN 2 GRIS 2 20.000 l/h 10 bar 2 x EXPANSIN 2
RYLBRUN 2 2 30.000 l/h 26 bar 2 x CNICO 2
RYLBRUN 3 3 72.000 l/h 26 bar 2 x CNICO 3
RYLBRUN 4 4 120.000 l/h 26 bar 2 x CNICO 4
Todos los rcores son en acero inoxidable AISI 316. / All the conections are made in Stainless Steel AISI 316.
91
Motores Sumergibles
Serie FRANKLIN
Aplicaciones: Applications:
Motores blindados fabricados segn normas ISO 9001 en Hermetic motors manufactured complying with DIN
bao de agua, totalmente en acero inoxidable AISI-304 y con and ISO 9001 standards. Filled international NEMA cou-
acoplamiento para bomba de tipo NEMA. pling. Fully made in stainless steel 304. The 4 single
Los motores de 4 monofsicos necesitan de condensador phase motors require external capacitor.
exterior. All motors are supplied with one or two wires depen-
Todos los motores se suministran con uno o dos tramos de ding on the start mode.
cable en funcin del tipo de arranque del motor.
Construction:
Caractersticas constructivas: Encapsulated or rewindable stator.
Esttor encapsulado o rebobinable Seal and protector for a better performance against
Retn mecnico y protector para un mejor funcionamiento sand.
contra la arena. Horizontal and vertical installation.
Permite montaje tanto vertical como horizontal. Motors from 6 to 10 can be supplied direct start or
Motores de 6, 8 y 10 pueden solicitarse para arranque star delta.
directo o para arranque estrella-tringulo
Types:
Tipos: Motors 4 encapsulated single phase (up to 3HP)
Motores de 4 encapsulados monofsicos (hasta 3CV) y tri- - Three phase 230V up to 7.5HP
fsicos a 230V (hasta 7.5CV) 400V (hasta 10CV) - Three phase 230V up to 10HP
Motores de 6 encapsulados (hasta 60CV) o rebobinables Motors 6 encapsulated up to 60HP and rewindable
(hasta 45CV) up to 45HP
Motores de 8 encapsulados (hasta 200CV) o rebobinables Motors 8 encapsulated up to 200HP and rewindable
(hasta 125CV) up to 125HP
Motores de 10 rebobinables (hasta 250CV) Motors 10 rewindable up to 250HP
Aplicaciones: Applications:
Motores elctricos SACI para bombas sumergibles con aco- Electrical motors SACI type for submersible pumps
plamiento de 4 y tambin de 6, 8 y 10. with 4, and 6, 8 and 10 with NEMA coupling.
Los motores de 4 contienen en su interior un bao de aceite The 4 motors are tilled with non toxic dielectric oil.
lquido dielctrico atxico, apto para instalaciones de todo This motor is suitable for all types of applications and
tipo, y especialmente indicado en instalaciones con tensin specially recommended in installations with low net
de red baja, y en instalaciones de depsito abierto, gracias tension, and in tank pools, thanks to its easy cooling
a su fcil refrigeracin. Disponen adems de un diafragma avility.
que permite la compensacin de la presin interior del motor The 6, 8 and 10 motors are all rewindable, and equi-
con la del pozo. pped with radial and axial bearings of dual rotation, and
Los motores de 6, 8 y 10 son todos rebobinables, y dis- water lubricated.
ponen de cojinetes radiales y axiales de doble sentido de giro
lubricados por agua. Construction:
Manufactured fully in stainless steel 304.
Caractersticas principales: Rewindable stator
Fabricado completamente en acero inoxidable AISI-304 Standard NEMA coupling
Estator rebobinable. Wire with resin filled connector
Acoplamiento standard NEMA. Maximum number of starts: 150 per hour (only 4 mo-
Cable de alimentacin con conector estanco. tors)
Mximo nmero de arranques: 150 arranques/hora (motores Maximum inmersion: 200 meters under the water (only
de 4). 4 motors)
Inmersin mxima: 200 metros bajo el agua (motores de 4). Protection IP68, Issolation class E
Proteccin IP68 , aislamiento clase E. Maximum water tamperature: 40C
Mxima temperatura del agua: 40 C.
93
Sumergibles Aguas Fecales,
Agotamiento y Drenajes
Serie VORT 96
Serie COMPACTA 97
Serie FEKA 98
Serie HT 99
Serie SF 113
95
Sumergibles Aguas Fecales Vrtex
Serie VORT
Aplicaciones: Applications:
Bomba centrfuga sumergible idnea para el desage de Submersible centrifugal pump in stainless steel that is
aguas sucias y cargadas en general. Incorporan interruptor ideal for draining dirty waters and waters that are ge-
de nivel para su funcionamiento automtico en versin mo- nerally loaded.
nofsica.
Charactheristics:
Caractersticas: Pump body, mechanical closing lid, filter, filter lid, shaft,
Cuerpo bomba, cuerpo motor, turbina y eje motor en acero motor housing, external housing and lid with handle in
inoxidable AISI-304. Doble sello mecnico y cmara interme- AISI 304 stainless steel.
dia de aceite atxico. Equipada con 10 metros de cable. Vortex Impeller in AISI 304 microfusion stainless steel
Double mechanical seal with intermediate oil chamber
Motor:
A 2.850 r.p.m., asncrono estanco con aislamiento clase Motor:
F=155 C. y grado de proteccin IP-68, la refrigeracin del At 2,850 r.p.m., asynchronous closed with isolation
motor se efectua por el lquido en el cual est sumergida. type F (155 C) IP-68 protection. Refrigeration of the
Inmersin mxima 10 metros. motor through the liquid surrounding.
Maximum immersion 10 meters.
96
Sumergibles Aguas Fecales Vrtex
Serie COMPACTA
Aplicaciones: Applications:
Las robustas y porttiles electrobombas de la serie compacta The robust, portable electropumps of the compact se-
que incorporan turbina desplazada tipo Vortex estn diseadas ries that include a displaced Vortex type Impeller are
especficamente para la evacuacin de aguas cargadas que con- specifically designed for evacuating loaded waters that
tengan gases o bien slidos blandos en suspensin. contain soft solids in suspension. They are ideal for use
Son ideales para su uso en fosas spticas, industrias, hospitales, in septic tanks, industries, hospitals, etc...
etc... Must work with motor parcially inmersed.
Debe trabajar con el motor, al menos, parcialmente sumergido.
Construction:
Caractersticas Constructivas: Pump body, motor housing, bearing holder and motor
Cuerpo bomba, carcasa motor, porta cojinetes y tapa motor en lid in GG25 cast iron. Bolts in A2 stainless steel. O-rings
fundicin de hierro GG25. Tornillera en acero inoxidable tipo A2.
Juntas tricas en nitrilo. Eje bomba en acero inoxidable AISI
420. Sello mecnico del lado bomba en carbono de silicio y su-
in nitryl. Pump shaft in AISI 420 stainless steel. Mecha-
nical seal on the pump side in silicon carbide and an
oil seal at the top. The compacta 5 M AUT includes a
G
perior es un retn de aceite. switch level apart from the pump.
Motor: Motor:
Asncrono a 2.850 r.p.m. monofsico y trifsico, aislamiento Asynchronous at 2,850 rpm, single and triple phase,
clase F. Grado de proteccin IP-68 e incorpora motoprotector class F insulation. IP-68 protection. Includes 10 metres
en el bobinado. Incorpora de serie 10 mts. de cable H07 RNF. of HO7 RNF cable as standard.
Temperatura mxima del agua en continuo + 40 C. Maximum water temperature in continuous + 40 C.
Valores de Ph entre 6 y 11. Ph values between 6 and 11.
Aplicaciones: Applications:
Bomba centrfuga sumergible idnea para el desage de aguas Submersible centrifugal pump in stainless steel that is
sucias y cargadas en general. Incorporan interruptor de nivel ideal for draining dirty waters and waters that are ge-
para su funcionamiento automtico en versin monofsica (ex- nerally loaded.
cepto FEKA 1400 M).
Construction:
Caractersticas Constructivas: FEKA VS: Pump body, mechanical closing lid, filter and
FEKA VS: Cuerpo bomba, cuerpo motor, turbina y eje motor en filter lid, motor housing, external housing and lid with
acero inoxidable. Doble sello mecnico y cmara intermedia de handle in AISI 304 stainless steel. Motor shaft in AISI
aceite txico. Equipada con 10 metros de cable. 316 stainless steel. Vortex Impeller in AISI 304 micro-
FEKA 1400 / 1800: Cuerpo, carcasa motor y turbina en fundi- fusion stainless steel.
cin de hierro. Cierre mecnico de carburo silicio. Tornillera, Double mechanical seal with intermediate oil chamber
extensin eje motor y asa en acero inoxidable. Cmara de cierre (silicon carbide lower and carbon - aluminium upper).
mecnico inspeccionable baada en aceite. FEKA 1400 - 1800: Vortex system pump, pump body,
motor housing and Impeller in high strength cast iron.
Motor: Mechanical seal in carbon and ceramic. Bolts, motor
Motor en seco, refrigerado mediante lquido bombeado. shaft extension and handle in stainless steel. Mechani-
Todos los motores incorporan de serie una proteccin termo cal seal chamber, oil bathed inspectionable.
ampermetrica.
Temperatura del lquido: de + 0 C a + 35 C Motor:
Inmersin mxima 10 mts. ADry motor, cooled with the pumped liquid.
Temperature of the liquid: from + 0 C to + 35 C. IP-
68. Class F.
MAXIMUM IMMERSION 10 METERS.
Aplicaciones: Applications:
Las electrobombas de la serie HT estn especialmente dise- The electropumps of the HT series are especially desig-
adas para la elevacin de aguas claras y ligeramente carga- ned to raise clear and lightly loaded or sandy waters to
das o arenosas a grandes alturas. Especialmente indicadas great heights. Particularly recommended for fountains,
para fuentes, riegos, pozos, cisternas, equipos contra incen-
dios, etc....
irrigation, wells, cisterns, fire fighting equipment, etc...
G
Construction:
Caractersticas constructivas: Housing, motor lid, pump body and Impeller in G-25
Carcasa, tapa motor, cuerpo bomba y turbina en fundicin high strength cast iron; rotor shaft and bolt work in
G-25 de alta resistencia; eje rotor y tornillera en inox.; juntas stainless steel, o-rings in nitryl rubber, mechanical seal
tricas en goma nitrlica; cierre mecnico autolubrificado me- self-lubricated by intermediate oil chamber, upper me-
diante cmara intermedia de aceite, cierre mecnico superior chanical seal in graphite ceramic and lower in silicon
en cermica-grafito y cierre mecnico inferior en carburo de carbide - viton.
silicio-vitn.
Motor:
Motor: Asynchronous, in dielectric and atoxic oil bath only
Asncrono, en bao de aceite dielctrico y atxico, absolu- in the seal chamber, absolutely sealed with F=155 C
tamente estanco con aislamiento tipo F=155 C y grado de sealing and IP-68 protection. Standard with 10 metres
proteccin IP-68; de serie con 10 mts. de cable de neopreno of HO7-RN-F neoprene cable.
H07-RN-F. All motors are standard at 2,850 rpm.
Todos los motores de esta serie son a 2.850 r.p.m. Maximum water temperature pumped in continuous +
Temperatura mxima del agua bombeado en continuo + 40 40 C and in intermittent + 80 C.
C y en intermitente + 80 C. Valores Ph: entre 6-11. Ph values: between 6-11.
Profundidad mxima de inmersin: 20 mts. Maximum immersion: 20 metres.
Densidad mxima del lquido: 1.100 Kg/ m3
Aplicaciones: Applications:
Bomba de tipo sumergible con triturador, para el servicio civil Submergible pumps with grinder cutting system for
e industrial, de bombeado de aguas sucias procedentes de civil and industrial use.To pump waters from sanitary
servicios higinicos en albergues, campamentos, hospitales services in boarding houses, camp sites, hospitals, and
y de aguas residuales procedentes del zoo, industria con- residual waters from zoos, conserve industries, etc...
servera, etc. Esphere valve recomended for low pressure work.
En caso de trabajar a baja altura, recomendamos instalar
una vlvula de bola para provocar el trabajo dentro de Construction:
la curva. Body, motor housing and Impeller in high strength cast
iron.
Caractersticas Constructivas: Grinder mechanism in stainless steel obtained by mi-
Cuerpo bomba, cuerpo motor y turbina en fundicin de alta crofusion and hardened to achieve hardn ess and tena-
resistencia. Dispositivo triturador en acero inoxidable obte- city. Iron sealing disk. Bolts and motor shaft extension
nido por microfusin y endurecido para obtener dureza y in stainless steel. Mechanical seal chamber in silicon
tenacidad. Disco cierre de hierro. Tornillera y extensin eje carbide.
motor en acero inoxidable. Cierre mecnico en carburo de
silicio. Motor:
Submergible, asynchronous, continuous service, tight
Motor: seal cladded. Rotor mounted with ball bearings calcula-
Asncrono absolutamente estanco con aislamiento clase F= ted to guarantee duration and silent working. CEI stan-
155 C. y grado de proteccin IP-68, la refrigeracin del motor dard. IP-68 protection. F insulation.
efectua por el lquido en el cual est sumergida la bomba. Includes Single phase electrical control panel (only
La bomba GRINDER 1400 M incluye cuadro de protec- for 1400 M Grinder). Without float switches.
cin de serie. No incluye sondas. Control containing the permanent capacitor and the me-
Instalar siempre una vlvula de corte para ajustar la al- chanism for increasing the starting torque.
tura manomtrica mnima de la bomba. Install always a closing valve to adjust the minimum
manometric high of each pump.
GRIX 100 M Aut 5 - 2.850 9,5 9 8,5 8,2 7,7 7,3 6,3
1,2
GRIX 100 T - 2,4 2.850
GRINDER 1400 M 1,5 8,7 - 2.850
GRINDER 1800 T 2 - 3,8 2.850
GM 32-2 149 M Aut 6 - 2.850
1,2 12,6 12,2 11,5 10,4 9,7 9 6,5
GT 32-2 149 T - 2,5 2.850
GM 32-2 150 M Aut 8,9 - 2.850
2 12,6 11,9 10,8 9,7 9 6,8
GT 32-2 150 T - 3 2.850
GM 32-2 155 M Aut 11 - 2.850
2,5 14,4 13,7 12,9 11,5
GT 32-2 155 T - 4,2 2.850
GT 32-2 160 T 3 - 5 2.850 15,5 15,1 15,1 14,8
GT 50-2 165 T 4 - 7,8 2.850
GT 50-2 170 T 5,5 - 9,5 2.850
GT 50-2 175 T 8,5 - 13,7 2.850 28,8 28,6
GT 50-2 180 T 10,5 - 16,2 2.850
GT 50-2 185 T 13 - 20 2.850
100
Tablas de seleccin rpida / Numerical Selection table
Serie GRIX - GRINDER - GM/GT
5 2,9 0,9 6 2
Aplicaciones: Applications:
Bombas para aguas fecales con turbina de tipo Vortex, especial- Sewage water pumps with Vortex impeller, designed
mente indicadas en instalaciones de atmsfera explosiva, o que for installations with explosive atmosphere, or with
presentes cierto riesgo de deflagracin. some risk of explosion.
Caractersticas constructivas:
Construction:
Bomba en hierro fundido EN-GJL-250, turbina en aleacin EN-
Cast iron pump EN-GJL-250, impeller alloy EN-GJL-250
GJL-250+Niquel, cable elctrico de neopreno H07RN-F, eje en
+ Nickel, neoprene cord H07RN-F, AISI-420B stainless
acero inoxidable AISI-420B, juntas en nitrilo, tornilleria de Clase
steel shaft, nitrile o-rings, AISI-304 Class 2 bolts, cera-
A2 / AISI-304, sello mecnico de Carburo de silicio.
mic carbide mechanical seal.
Tipo de construccin antidefragrante EEX d llb T4 (segn
Anti explosion construcion EEX d llb T4 (follows
normas ATEX).
ATEX regulation).
Motor:
Motor elctrico asncrono, grado de proteccin IP68, aisla-
miento clase H. Motor:
Mxima temperatura del agua: 40C. Asynchronous motor, IP-68 protection, issolation class
Arranques mximos: 15 arranques/hora. H.
Maximum water temperature: 40C
Maximum starts: 15 starts / hour.
G
Aplicaciones: Applications:
Las electrobombas de la Serie MG - M, por su robustez The robustness and compact design of the electro-
y diseo compacto, son las idneas para el bombeado de pumps of the M-MG series make them ideal for
aguas residuales como pueden ser fangos biolgicos, etc., pumping waste waters such as biological silts, etc.
que contengan slidos en suspensin. Especialmente indica- that contain solids in suspension of up to 140 x 140
das para el sector civil, industrial y sanitario. mm. Particularly recommended for the civil, industrial
and sanitary sectors. Thanks to the design of the open
Gracias al diseo de sus diferentes componentes as como monochannel, multichanel Impellers,
a los dispositivos de seguridad que incorporan los motores, The upper part of the Impeller includes a toothed sec-
estas bombas son aptas para un trabajo continuo. tion that prevents particles and filaments from adhering
Debe trabajar con el motor completamente sumergido. to the shaft.
MXIMA TEMPERATURA DEL LQUIDO: 50 C Must work with motor fully submerged.
MAXIMUM TEMPERATURE OF THE LIQUID: 50 C
Caractersticas constructivas:
Carcasa, tapa motor, cuerpo bomba y turbina en fundicin Construction:
G-25 de alta resistencia; eje rotor y tornillera en inox.; juntas Housing, motor lid, pump body and Impeller in G-25
tricas en goma nitrlica; cierre mecnico superior en cermi- high strength cast iron; rotor shaft and bolt work in
ca-grafito y cierre mecnico inferior en carburo de silicio-vi- stainless steel, o-rings in nitryl rubber, mechanical seal
tn. self-lubricated by intermediate oil chamber, upper me-
chanical seal in graphite ceramic and lower in silicon
Motor: carbide - viton.
Asncrono, absolutamente estanco con aislamiento tipo
F=155 C y grado de proteccin IP-68; de serie con 10 mts. Motor:
de cable de neopreno H07-RN-F. Asynchronous, class F=155 C insulation and IP-68
protection. Standard with 10 metres of HO7-RN-F neo-
La refrigeracin del motor se efectua por el lquido en el cual prene cable.
esta sumergida la bomba. These pumps works 2,850 rpm - 1,450 rpm 970 rpm.
103
Tablas de seleccin rpida / Numerical Selection Table
Serie M
104
Tablas de seleccin rpida / Numerical Selection Table
Serie M
40 DN 65 / PN10
16,2 12,2 5,4 40 DN 65 / PN10
23,4 12,6 5,4 1 45 DN 65 / PN10
100,8 88,5 72 57,6 43,2 28,8 7,2 55 DN 80
140,4 134,2 122,4 110,9 93,6 75,6 39,6 25,2 3,6 33 DN 80
187,2 176,1 166 153,3 139 122,4 93,6 78,2 61,2 39,6 14,4 33 DN 80
75 72 67 58 52 44 25 12 3,5 40 DN 80
54 45 36 18 40 DN 80
75 DN 80
75 DN 80
75 DN 80
90 DN 100
90 DN 100
1 90 DN 100
1 90 DN 100
32,4 14,4 90 DN 100
43,2
111,6
209
90
187,2
72
162
46,8
122,4
25,2
90
3,6
43,2 14
100
80
80
DN 150
DN 150
DN 150
G
65 18 110 DN 150
162 115 68,4 28,8 110 DN 150
234 194,4 144 90 50,4 3,6 120 DN 150
284,4 248,4 216 158,4 115,2 46,8 120 DN 150
428,4 385,2 345,6 284,4 223,2 166 86,4 54 110 DN 150
522 450 385,2 297 260 158,4 118,8 82,8 18 120 DN 150
512 432 360 234 172,8 126 93,6 61,2 18 130 DN 150
80 DN 100
120 72 36 80 DN 100
80 DN 150
60 100 DN 150
365 325 288 225 160 40 100 DN 150
320 244 180 80 20 80 DN 150
480 450 430 380 340 250 90 100 DN 150
640 600 560 480 400 320 90 102 DN 200
980 930 860 800 670 570 300 130 105 DN 250
1120 1080 1020 970 850 750 570 430 300 200 105 DN 250
102 DN 200
36 102 DN 200
105 DN 250
100 105 DN 250
600 340 140 DN 300
840 620 440 140 DN 300
105
Sumergibles Aguas Fecales Vrtex
Serie VT
Aplicaciones: Applications:
Las electrobombas de la Serie VG - VT, por su robustez The robustness and compact design of the electropumps of
y diseo compacto, son las idneas para el bombeado de the VG - VT series make them ideal for pumping waste
aguas residuales como pueden ser fangos biolgicos, etc., waters such as biological silts, etc. that contain solids in sus-
que contengan slidos en suspensin de hasta 130 x 130 pension of up to 130 x 130 mm. Particularly recommended for
mm. Especialmente indicadas para el sector civil, industrial y the civil, industrial and sanitary sectors. Thanks to the design
sanitario. Gracias al diseo de sus turbinas vortex es posible of the vortex Impellers, it is possible to transfer liquids with
bombear lquidos que contengan gases la parte superior de abrasive particles or gases. The upper part of the Impeller in-
la turbina incorpora un especial dentado que previene la ad- cludes a toothed section that prevents particles and filaments
hesion de filamentos al eje y sello mecnico. from adhering to the shaft.
Debe trabajar con el motor completamente sumergido. Must work with motor fully submerged.
TEMPERATURA MXIMA DEL LIQUIDO: 50 C MAXIMUM TEMPERATURE OF THE LIQUID: 50 C
Motor: Motor:
Asncrono, absolutamente estanco con aislamiento tipo Asynchronous, in dielectric and atoxic oil bath only in the seal
F=155 C y grado de proteccin IP-68; de serie con 10 mts. chamber, absolutely sealed with F=155 C sealing and IP-68
de cable de neopreno H07-RN-F. protection. Standard with 10 metres of HO7-RN-F neoprene
La refrigeracin del motor se efectua por el lquido en el cual cable. All motors are standard at 2,850-1,450-970 rpm.
esta sumergida la bomba.
106
Tablas de seleccin rpida / Numerical Selection Table
Serie VT
75 DN 80
75 DN 80
80 DN 80
16,2 5,4 80 DN 80
39,6 28,8 9 80 DN 80
100 DN 100
21,6 7,2 100 DN 100
46,8 36 7,2 90 DN 100
86,4 72 50,4 14,4 90 DN 100
111,6 100,8 79,2 55,8 28,8 90 DN 100
154,8 151,2 133,2 111,6 86,4 54 10,8 90 DN 100
198 190,8 176,4 158,4 136,8 115,2 86,4 21,6 90 DN 100
144 115,2 82,8 43,2 3,6 90 DN 100
190,8 154,8 118,8 79,2 36 3,6 90 DN 100
370,8 342 288 244,8 198 144 90 130 DN 150
414 370,8 324 284,4 244,8 180 108 7,2 130 DN 150
414 306 252 194,4 115,2 54 10,8 130 DN 150
107
Sumergibles de Drenaje
Serie DRX
Aplicaciones: Applications:
Bombas sumergibles idneas para el drenaje de aguas tur- Submersible electro pump ideal for drainage and dirty-
bias y arenosas que contengan slidos de mximo 8 mm. de sandy waters, containing solids no larger than 8 mm.
dimetro. of diameter.
Motor: Motor:
Motor en seco, refrigerado mediante lquido bombeado. Dry motor, cooled with the pumped liquid.
Todos los motores incorporan de serie una proteccin termo Temperature of the liquid: from + 0 C to + 35 C.
ampermetrica. IP 68. Class F.
Temperatura del lquido: de + 0 C a + 35 C. Maximum immersion 10 meters.
Inmersin mxima 10 metros.
Aplicaciones: Applications:
Bombas sumergibles idneas para el drenaje de aguas tur- Submersible electro pump ideal for drainage and dir-
bias y arenosas que contengan slidos de mximo 12 mm. ty-sandy waters, containing solids no larger than 12
de dimetro (FEKA 1400-1800). mm. of diameter (FEKA 1400-1800).
Caractersticas constructivas:
DRENAG 1000 / 1200 M/T: Cuerpo bomba, turbina, rejilla,
Construction:
DRENAG 1000 / 1200 M/T: Pump body, impeller, fil-
G
base de aspiracin, asa y carcasa de motor en acero inoxida- ter, base, handle and casing in stainless steel AISI 304.
ble AISI-304. Eje motor en acero inoxidable AISI-316. Doble Shaft in stainless steel AISI 316. Double mechanical
sello mecnico y cmara intermedia de aceite atxico. Equi- seal with intermediate oil chamber. Supplied with 10
pada con 10 mt. de cable HO7-RNF. mts of H07-RNF cable.
DRENAG 1400 M / 1800 T: Cuerpo, carcasa motor y tur- DRENAG 1400 M / 1800 T: Pump body and motor ca-
bina en fundicin de hierro de alta resistencia. Disco cierre sing in high resistant cast iron. Impeller plate protected
turbina recubierto de goma antiabrasiva (slo para Drenag). with rubber (only Drenag). Filter in stainless steel AISI
Filtro de aspiracin en acero inoxidable. Cierre mecnico de 304. Mechanical seal in silicium carbide. Shaft, bolts
carburo de silicio. Tornillera, extensin eje motor y asa en and handle in stainless steel. Oil chamber for mecha-
acero inoxidable. Cmara de cierre mecnico inspeccionable nical seal .
baada en aceite.
Motor:
Motor: At 2,850 r.p.m., asynchronous closed with isolation
A 2.850 r.p.m., asncrono estanco con aislamiento clase type F (155 C) IP-68 protection. Refrigeration of the
F=155 C. y grado de proteccin IP-68, la refrigeracin del motor through the liquid surrounding. Maximum immer-
motor se efectua por el lquido en el cual est sumergida la sion 10 mts.
bomba. Inmersin mxima 10 mts.
Descripcin: Description:
Submersible electropumps conceived for evacuating
Electrobombas sumergibles, concebidas para la funcin de
and draining in floods, in foundation building and in dri-
agotamiento y drenaje en inundaciones, en la construccin lling wells and similar, where it is necessary to transfer
de los cimientos de edificios y en la perforacin de pozos waters with mixtures of mud and sands.
y similares, donde sea necesario el trasiego de aguas con It has a built-in magnetothermal motor protector with a
mezclas de barros y arenas. Lleva un guardamotor magne- button on the outside for rearming.
to-trmico incorporado, que puede ser rearmado desde el
exterior mediante pulsador. Motor: At 2,850 rpm. Cooled by means of the water
pumped through a double chamber. Voltage changed
from the outside by means of a special cable. Double
Motor: mechanical seal in high strength Hard Metal to ensure
A 2.850 r.p.m. refrigerado mediante el paso del agua bom- that the pump motor is properly sealed.
beada a travs de una doble cmara. Cambio de tensin
desde el exterior, mediante cable especial. Doble junta me-
cnica de Metal Duro de gran resistencia, que asegura la
estanqueidad bomba-motor.
110
Sumergibles en Broze Marino B10
Serie BRONZE MARINO
Aplicaciones: Applications:
Las electrobombas sumergibles en bronce marino B10 estn Submersible pump in marine bronze B-10, to pump li-
indicadas para el bombeo de lquidos provenientes del sector quids from marine, chemical, petrol industry.
marino, alimentario, productos qumicos y petroqumicos.
Construction:
Caractersticas constructivas:
Pump body, motor casing in marine bronze B-10. Shaft,
Cuerpo bomba, cuerpo motor en bronce marino B10, turbina y
impellers and nuts in stainless steel AISI 316. O-ring
tornillera en acero inoxidable AISI-316, eje en acero inoxidable
in nytril. Upper mechanical seal in ceramic-graphite.
AISI-316L, juntas en goma nitrlica, cierre mecnico superior en
Lower mechanical seal in silicium carbide.
cermica-grafito y cierre mecnico inferior en carburo de silicio.
BD Serie - Drainage
Serie BD - Drenaje
Serie BV - Vortex
Serie BC y BM - Multicanal / Monocanal
BV Serie - Vortex
BC & BM Serie - Multichannel / Monochannel G
Motor: Motor:
Asncrono absolutamente estanco con aislamiento clase F= Asyncronous, completly sealed, with class F= 155 C
155 C y grado de proteccin IP-68, la refrigeracin del motor isolation. IP-68 protection.
se efectua por el lquido en el cual est sumergida la bomba.
Aplicaciones: Applications:
Las electrobombas sumergibles en acero inox AISI-316 estn in- Submersible pump in stainless steel AISI 316, to pump
dicadas para bombeo de lquidos agresivos y corrosivos, en parti- agressive liquids and corrosive. Mostly used to drain
cular para el drenaje de lquidos provinientes en plantas qumicas. liquids from chemical plants.
Aplicaciones: Applications:
Las electrobombas sumergibles en acero inox AISI-316 estn in- Submersible pump in stainless steel AISI 316, to pump
dicadas para bombeo de lquidos agresivos y corrosivos, en parti- agressive liquids and corrosive. Mostly used to drain
cular para el drenaje de lquidos provinientes en plantas qumicas. liquids from chemical plants.
FEKABOX 110 FEKABOX 200 FEKAFOS 280 FEKAFOS 280 DOUBLE FEKAFOS 550
Estaciones automticas para almacenamiento y elevacin de Automatic stations for storing and rising civil and in-
aguas residuales civiles e industriales hacia el alcantarillado. dustrial residual waters to the drain network:
Incluyen un depsito de polietileno de alta densidad de 110 lts. /
200 lts. y con los siguientes accesorios segn modelo: FEKABOX 110 (only for 1 pump)
Estas estaciones de bombeo no incluyen bombas Container of 110 lit. made of high density polyetilene, to
use with one pump. Includes automatic coupling finger
KIT FEKABOX 110 and connection accesories for pumps in 2.
(Para 1 sola bomba) incluye: Depsito 110 lts., 1 minizcalo de This faecal station does not includes the pump.
anclaje ya instalado.
FEKABOX 200 (only for 1 pump)
Puede usarse con las siguientes bombas:
Container of 200 lit. made of high density polyetilene, to
NOVA/FEKA y COMPACTA 1 - 2 - 3 - 22 - 32. use with one pump. Includes automatic coupling finger
Medidas: A x B x H / 700 x 380 x 500 mm. and connection accesories for pumps in 2.
This faecal station does not includes the pump.
KIT FEKABOX 200
(Para 1 sola bomba) incluye: Depsito 200 lts., 1 minizcalo de FEKAFOS 280 (only for 1 pump)
anclaje ya instalado. Container of 280 lit. made of high density polyetilene, to
Puede usarse con las siguientes bombas: use with one pump. Includes automatic coupling finger
FEKA 600 y COMPACTA. and connection accesories for pumps in 2.
Medidas: A x B x H / 850 x 555 x 735 mm. This faecal station does not includes the pump.
KIT FEKAFOS 280 DOUBLE (para 2 bombas) FEKAFOS 550 (for 2 pumps)
Deposito: 280 Lts. 2 minizcalos de anclaje. Container of 550 lit. made of high density polyetilene, to
3 Interruptores de nivel. use with two pumps. Includes two automatic coupling
fingers and connection accesories for pumps in 2. Also
Puede usarse con las siguientes bombas:
includes 3 mercury floating switches.
COMPACTA, FEKA VS, FEKA, GRINDER, GM/GT.
This faecal station does not includes the pump.
Medidas: A x B x H / 800 x 640 x 745 mm
ESQUEMA DE INSTALACION
KIT FEKAFOS 550 (para 2 bombas)
Depsito 550 lts., 2 minizcalos de anclaje,
3 interruptores de nivel.
Puede usarse con las siguientes bombas:
COMPACTA, FEKA VS, FEKA, GRINDER, GM/GT.
Medidas: A x B x H / 920 x 1.100 x 745 mm.
Accesorios Opcionales:
Cuadro elctrico y
Alarma acstica
114
Estaciones Automticas de Recogida y Elevacin de Aguas Fecales
Serie FEKAFOS
Estaciones automticas para almacenamiento y elevacin de Automatic stations for storing and rising civil and in-
aguas residuales civiles e industriales hacia el alcantarillado. dustrial residual waters to the drain network:
Estas estaciones de bombeo no incluyen bombas
FEKAFOS 1200 (for 2 pumps)
KIT FEKAFOS 1200 Container of 1200 lts. made of high density polyetilene,
Depsito: 1200 Litros. 2 zcalos DN-65 de anclaje to use with one pump. Includes automatic coupling
3 Interruptores de nivel. finger and connection accesories for pumps in DN-65.
Puede usarse con las siguientes bombas: This faecal station does not includes the pump.
M 65-2, HT 50, GT 50
Medidas: A x B x H / 1250 x 1250 x 1420 mm FEKAFOS 2000 (for 2 pumps)
Container of 2000 lts. made of high density polyetilene,
G
to use with one pump. Includes automatic coupling
KIT FEKAFOS 2.000 finger and connection accesories for pumps in DN-65.
Depsito: 2000 Litros. 2 zcalos DN-65 de anclaje. This faecal station does not includes the pump.
3 Interruptores de nivel.
Puede usarse con las siguientes bombas: FEKAFOS 3800 (for 2 pumps)
M 65-2, HT 50, GT 50 Container of 3800 lts. made of high density polyetilene,
Medidas: A x B x H / 1250 x 1250 x 2300 mm to use with one pump. Includes automatic coupling
finger and connection accesories for pumps in DN-65.
KIT FEKAFOS 3.800 This faecal station does not includes the pump.
Depsito: 3800 Litros. 2 zcalos DN-65 de anclaje.
3 Interruptores de nivel.
Puede usarse con las siguientes bombas:
M 65-2, HT 50, GT 50
Medidas: A x B x H / 1800 x 1800 x 1860 mm
Serie B 118
Serie BE 119
Serie MD 75 122
H
Bombas de Arrastre Magntico y Vaciado de Bidones 124
117
Bombas Usos Varios
Serie B
Todos los tipos indicados deben funcionar con lquidos sin All types indicated must work with liquids without solid
residuos slidos, siendo imprescindible el empleo del filtro. residues, and the use of a filter is essential. For suction
Para alturas de aspiracin mayores de las tabuladas (mx. 7 heights exceeding those in the tables (maximum 7 me-
m.) debe utilizarse vlvula de retencin. Para otras caracte- tres), a retention valve must be used. Please consult us
rsticas de servicio rogamos nos consulten. for other service characteristics.
BOMBA Y EQUIPO PRESIN CORRIENTE CONTINUA. PUMP AND BOOSTER SET WITH CONTINUOUS CU-
Pequeo grupo indicado para disponer de agua a presin en embar- RRENT.
caciones, caravanas, etc... donde slo se disponga de C.C. Little group indicate to have pressure in boats, caravans, etc.
118
Autoaspirante Uso Varios
Serie BE
Aplicaciones: Applications:
SERIE BE: Electrobomba autoaspirante de anillo lquido. A liquid ring self-driving pump.
Equipadas con asa, rcores para manguera y cable con clavija Fitted with a handle, connections for hose and cable with
de enchufe por su concepcin de bomba porttil. plug for its portable facility.
AUTOASPIRANTE HASTA 8 METROS. The AC versions are with reversible flow with a turn di-
rection switch.
Caractersticas constructivas: SELF-PRIMMING UP TO 8 METRES.
Cuerpo bomba, rcores y turbina en bronce segn Norma
UNI 5075 inoxidable para evitar bloqueos. Eje en acero inoxi- Construction:
dable 18/8 y cierre mecnico Corteco con muelle de acero Pump body, connectors and impeller in stainless bronze
inoxidable y elastmero especial. according to UNI 5075 to prevent blockage.
Temperatura mxima del agua: 35 C Shaft in 18/8 stainless steel and Corteco mechanical
Temperatura mxima ambiente: 35 C seal with stainless steel spring and special elastomer.
Presin mxima admitida: 6 Kg/cm2
Motor:
Maximum water temperature: 35 C
Maximum ambient temperature: 35 C
Maximum pressure admitted: 6 Kg/cm2
H
Cerrado de ventilacin externa, de servicio contnuo y
grado de proteccin IP-44 Motor:
LA BOMBA ROVER 20 CE PUEDEN SER CON IP-55 PARA Sealed with external ventilation, continuous service and
TRABAJAR CON GAS-OIL IP-44 protection.
TODAS LAS BOMBAS SON REVERSIBLES THE ROVER 20 CE PUMP MAY BE WITH IP-55
PROTECTION, FOR WORKING WITH DIESEL.
MARINA 20-12 12
3.200 480 19 17 12 9 5 3 2 20
MARINA 20-24 24
119
Bomba para Taladro
Serie DRILL
Aplicaciones: Applications:
Electrobomba autoaspirante de anillo lquido A self-drive liquid ring electropump suitable for trans-
adecuada para el trasiego de: VINO, AGUA DE ferring WINE, SEA WATER, OIL, DIESEL, etc.
MAR, ACEITE, GASOIL, etc.
Watts lts./h. max Alt. max. m.c.a. Asp. vert. m.c.a. Asp. horiz. m.c.a. Rumorosidad db
Tipo
Type 1500 3000 1500 3000 1500 3000 1500 3000 1500 3000 1500 3000 Mang.
r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. r.p.m. mm.
DRILL 20 220 350 720 2100 9 30 2 6 10 40 71 75 20
Aplicaciones: Applications:
Este moderno y actual kit es la solucin ms adecuada para This modern kit is the best solution for measuring li-
medir lquidos de uso privado como gasoil, vino, agua dulce quids in private use, such as diesel, wine, soft and salt
y salada, soluciones qumicas, water, chemical solutions, milk, etc...
leche, etc., cuando se hace ne- when it is necessary to guarantee rela-
cesario garantizar caudales rela- tively high flows at relatively low pres-
tivamente elevados a presiones sures.
relativamente bajas.
Construction:
Caractersticas constructivas: A kit comprising:
Kit compuesto por: - BE 25-M pump
- Bomba BE 25-M - Drive kit suitable for fuels and food
- Kit impulsin apto para combus- liquids.
tibles y lquidos alimentarios. Polypropylene counter with brass inlet
- Contador de polipropileno con and outlet, total and partial counter.
entrada y salida en latn, con Maximum pressure 3 bar.
contador total y parcial. Presin - Support bench
mxima 3 bar. - Suction filter
- Bancada soporte
- Filtro de aspiracin PRECISION: 5%
KIT ONLY SUITABLE FOR PRIVATE
PRECISION: 5% USE.
KIT VALIDO SOLO PARA USO PRIVADO
Aplicaciones: Applications:
H
Este filtro para vino con bomba incorporada de la serie BE This wine filter with built-in BE series pump makes
facilita muchsimo, dentro del ambiente domstico, la ope- domestic impurity filtering operations very easy with
racin de filtrado de impurezas de lquidos como vino, agua, products such as wine, water, etc...
etc....
The kit includes a BE 20 M pump (turning in only one
Este kit incorpora una bomba modelo BE 20 M (con un slo direction).
sentido de giro).
The flow is 360 lt./h with a maximum absorbed power
El caudal de esta bomba es de 360 lts./h y una mxima po- of 30 watts.
tencia absorbida de 30 Watt.
121
Bombas Autoaspirantes para Gas-Oil
Serie MD-75
DIESEL KIT
Compuesto por:
5 metros de manguera hidrocarburos,
pistola graduacin caudal (abrir-cerrar)
filtro aspiracin
PISTOLA AUTOMATICA
Cierra el paso del lquido
cuando el depsito est lleno.
Caudal mximo: 3.600 lts./h.
Aplicaciones: Applications:
Electrobomba autoaspirante de anillo lquido, especial para A liquid ring self-driving pump, special for the transfer of
trasiego de gas-oil. Autoaspirante hasta 4 metros, en aspi- diesel fuel. Self-driving up to 4 metres, in long horizontal
raciones horizontales de gran longitud es importante instalar suctions, it is important to install a pipe with a diameter
una tubera de dimetro superior al de entrada de la bomba. larger than that of the pump inlet.
Motor: Motor:
Asncrono, cerrado y de ventilacin externa. Proteccin ter- Sealed asynchronous with external ventilation. Built-in
mo-amperimtrica incorporada y condensador fijo. thermo-amperimetric protection and fixed capacitor.
Grado de proteccin IP-55, segn normativa vigente para IP-55 protection, according with the regulations for
trasiego de gas-oil. diesel transfer.
Aislamiento: clase F. Insulation: class F.
Temperatura mxima del agua: + 50 C Maximum water temperature: + 50 C.
Temperatura mxima ambiente: + 40 C Maximum ambient temperature: + 40 C.
122
Equipos de Presin para Gas-Oil
Serie GPS - GPC
GPS GPC
H
Aplicaciones: Applications:
Equipos especialmente diseados para el suministro de gas-oil Units specially designed for supplying diesel fuel to the
a calderas de calefaccin. En aspiraciones horizontales de gran burner. In long horizontal suctions, install a pipe with a
longitud, instalar tubera de dimetro superior al de la aspiracin diameter larger than that of the pump inlet.
de la bomba.
GPC COMPACT Model
Modelo COMPACTO GPC Comprising:
Compuesto por: MD 75 electropump, 5 lts. hydrocarbon expansion tank,
Electrobomba MD 75, vaso exp. 5 Lts. hidrocarburos, presostato working pressure gauge, safety pressure gauge, 5 watt
trabajo y seguridad con rearme manual incorporado, rcor de 5 connector, manometer, retention valve in suction, box
vas, manmetro, vlvula de retencin en aspiracin, caja con with warning lights, starting switch, flow reducer valve
pilotos de sealizacin, interruptor puesta en marcha, vlvula re- and general bench in folded plate.
ductora de caudal y bancada general en chapa doblada.
GPS SIMPLE Model
Modelo SIMPLE GPS Comprising:
Compuesto por: MD 75 electropump, 5 Lts. hydrocarbon expansion
Electrobomba MD 75, vaso exp. 5 Lts. hidrocarburos, presostato tank, working pressure gauge, 5 watt connector and
de trabajo, rcor 5 vas y manmetro manometer.
Serie CM 148
Serie CP 152
125
Catlogo General de Calefaccin Simplificado
Serie ROTOR HMEDO
MODELO P1 Q 0 0,6 1,2 1,8
MONOFASICA MONOFASICA MAX. m3/h 0 10 20 30
SIMPLE GEMELA W l/min
EVOSTA 40-70/130 - 44
6,9 5,7 4,6 3,2
EVOSTA 40-70/180 - 44
EVOTRON 40/130 M - 27
4 3,4 2,4 1,6
EVOTRON 40/180 M - 27
EVOTRON 60/130 M - 43
EVOTRON 60/180 M - 43 6 5,8 4,7 3,4
EVOTRON 60/180 XM - 43
EVOTRON 80/130 M - 66
EVOTRON 80/180 M - 66 8 8 6,1 4,8
EVOTRON 80/180 XM - 66
EVOPLUS 60/180 XM (SMALL) - 100 6,1 6,1 6,1
EVOPLUS 80/180 XM (SMALL) - 135 8,1 8,1 8,1
EVOPLUS 110/180 XM (SMALL) - 170 11,3 11,3 11,3
EVOPLUS B 40/220.32 M (SMALL) EVOPLUS D 40/220.32 M (D SMALL) 75 4,1
EVOPLUS B 60/220.32 M (SMALL) EVOPLUS D 60/220.32 M (D SMALL) 105 6
EVOPLUS B 80/220.32 M (SMALL) EVOPLUS D 80/220.32 M (D SMALL) 140 8
EVOPLUS B 110/220.32 M (SMALL) EVOPLUS D 110/220.32 M (D SMALL) 190 11
EVOPLUS B 120/220.32 M (SMALL) EVOPLUS D 120/220.32 M (D SMALL) 340 12
EVOPLUS B 60/250.40 M (SMALL) EVOPLUS D 60/250.40 M (D SMALL) 105 6
EVOPLUS B 80/250.40 M (SMALL) EVOPLUS D 80/250.40 M (D SMALL) 140 8
EVOPLUS B 110/250.40 M (SMALL) EVOPLUS D 110/250.40 M (D SMALL) 190 11
EVOPLUS B 40/220.40 M EVOPLUS D 40/220.40 M 90 4
EVOPLUS B 60/220.40 M EVOPLUS D 60/220.40 M 175 6
EVOPLUS B 80/220.40 M EVOPLUS D 80/220.40 M 260 8
EVOPLUS B 100/220.40 M EVOPLUS D 100/220.40 M 350 10
EVOPLUS B 120/250.40 M EVOPLUS D 120/250.40 M 465 H 12
(m)
EVOPLUS B 150/250.40 M EVOPLUS D 150/250.40 M 610 15
EVOPLUS B 180/250.40 M EVOPLUS D 180/250.40 M 610 18
EVOPLUS B 40/240.50 M EVOPLUS D 40/240.50 M 140 4
EVOPLUS B 60/240.50 M EVOPLUS D 60/240.50 M 260 6
EVOPLUS B 80/240.50 M EVOPLUS D 80/240.50 M 330 8
EVOPLUS B 100/280.50 M EVOPLUS D 100/280.50 M 430 10
EVOPLUS B 120/280.50 M EVOPLUS D 120/280.50 M 530 12
EVOPLUS B 150/280.50 M EVOPLUS D 150/280.50 M 640 15
EVOPLUS B 180/280.50 M EVOPLUS D 180/280.50 M 750 18
EVOPLUS B 40/340.65 M EVOPLUS D 40/340.65 M 190 4
EVOPLUS B 60/340.65 M EVOPLUS D 60/340.65 M 355 6
EVOPLUS B 80/340.65 M EVOPLUS D 80/340.65 M 465 8
EVOPLUS B 100/340.65 M EVOPLUS D 100/340.65 M 590 10
EVOPLUS B 120/340.65 M EVOPLUS D 120/340.65 M 730 12
EVOPLUS B 150/340.65 M EVOPLUS D 150/340.65 M 1210 15,2
EVOPLUS B 40/360.80 M EVOPLUS D 40/360.80 M 330 4
EVOPLUS B 60/360.80 M EVOPLUS D 60/360.80 M 535 6
EVOPLUS B 80/360.80 M EVOPLUS D 80/360.80 M 670 8
EVOPLUS B 100/360.80 M EVOPLUS D 100/360.80 M 1005 10
EVOPLUS B 120/360.80 M EVOPLUS D 120/360.80 M 1235 12
EVOPLUS B 40/450.100 M EVOPLUS D 40/450.100 M 530 4
EVOPLUS B 60/450.100 M EVOPLUS D 60/450.100 M 760 6
EVOPLUS B 80/450.100 M EVOPLUS D 80/450.100 M 1080 8
EVOPLUS B 100/450.100 M EVOPLUS D 100/450.100 M 1380 10
EVOPLUS B 120/450.100 M EVOPLUS D 120/450.100 M 1560 12,2
126
Tablas de seleccin rpida / Numerical Selection Table
Serie ROTOR HMEDO
2,4 1,7
1,1
2,6 1,8
4 3,2 1,8
1,7
I
8 7,4 6,7 6 5,3 4,3 3,6 2,7 1,8
10 9,5 8,5 7,6 6,8 5,5 5,3 3,7 2,8 2,2
11,8 11 10 9 8 7 6 5 4 3 2
13,5 12,5 11,5 10,5 9,6 8,2 7,2 6 5,1 4 2,8
14,8 14 13 12 10,9 9,7 8,8 7,5 6,5 5,2 4 3,1
4 3,8 3,4 3 2,5 2 1,5 0,8
6 6 5,9 5,4 4,7 4 3,5 2,8 2,2 1,6
8 8 7,5 6,8 6 5,5 4,8 4,1 3,5 2,8 2,2
10 9,8 9 8,4 7,5 6,8 6,2 5,3 4,7 4 3,2
12 11,4 11 10 9 8 7,3 6,7 6 5,3 4,6 3
15,2 15,1 15 14,8 14 13,2 12 11,3 10,4 9,8 8,7 7
4 3,6 3,2 2,7 2,3 1,8 1,5
6 5,8 5,3 4,8 4,1 3,5 3 2
8 7,5 6,8 6 5,4 4,9 4,3 3,1
10 10 10 9,4 8,2 7,8 7 5,6 2,9
12 12 12 11 10 9,1 8,5 6,8 4,3
4 3,6 3,2 2
6 5,5 4,8 3,8 1,5
8 7,9 7 5,9 3,2 2,1
10 9,8 9 7,8 4,7 3,5 0,8
12,2 11,2 10,5 8,8 5,8 4,8 1,8
128
Tablas de seleccin rpida / Numerical Selection Table
Serie ROTOR SECO
8,4 9,6 12 14,4 16,8 18 24 30 36 42 48 60 72 84 90 102 114 120 150 180 210 250 300 360 390 420
140 160 200 240 280 300 400 500 600 700 800 1000 1200 1400 1500 1700 1900 2000 2500 3000 3500 4167 5000 6000 6500 7000
5,3
6,3 5,7 4
8,2 7,4 5,6
11,2 10,4 8,4 5,9
2,5 2,3 1,8 1,3
4,5 4,3 3,8 3,2 2,5 2
8,6 8,5 8 7,4 6,6 6,3 3,9
11,6 11 10,5 9,8 9 8,6 6,2
2,8 2,7 2,6 2,4 2 1,8
5,3 5 4,7 4,6 4 3,8 2,5
8,8 8,6 8,5 8,1 8 7 5,5 3,5
11,6 11,4 11,2 11 10 8,8 6,7
3,2 3,1 3 2,9 2,7 2 1,2
5,8 5,8 5,7 5,5 5 4,3 3,4 2,5
8,7 8,6 8,5 8,4 8 7,7 6,8 6
11,6 11,5 11 10,4 9,7 7,2
130
Tablas de seleccin rpida / Numerical Selection Table
Serie ROTOR SECO
18 24 30 36 42 48 54 60 66 72 78 84 90 102 114 120 150 180 210 240 270 300 330 360 390 420
300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1700 1900 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000
30
39,5 35
48 42
54 49
11
16
24
34,5 27,7
44 41,5 37 31
50 47,5 42,5 37
55,5 53 49 44
13,8 13 11,8 10,5 8,6 7
17,8 17 15,9 14,6 13 11
22 21,2 20,2 19 17,4 15,5 13,5
25,6 25 24 23 21,5 19,5 17,5 15
34 33,5 32,5 31 29,5 27 24
41 41 40 39 37,5 35,5 33 30 26,5
45,5 45 44,3 43,3 42 40,8 39 37 35 32,3
56 55,5 54 53,5 52 51 49 47,5 45,5 43 41
62 62 61,5 60,5 59 58 56,5 55 53 51 48,5 43
68 67,5 67 66 65,5 64 62,5 61 59,5 57 55 50
75 74,5 73,8 73,5 71 68,5 67 65 62,5 60 57 49
94 94 94 93 91 89,4 87,5 85,6 83 81,5 78 72
13,8 13,3 12,9 12,5 12,1 11,4 10,8 10 9,2 8,3 7,5
16,5
20
16 15,5
19,5 19,1 18,5
15 14,5 13,7
18
23,6 23,5 23,2 22,8 22,2 21,5
13 12
17,5 16,5 15,8 14,8
21 20
11 10
14
9
12,5 11,5
19,1 18,5 17,5 16,5 13,4
I
27,5 27,3 27,1 26,7 25,8 25,6 24,9 24,5 23 21,2 20,1
32,2 32 31,8 31,3 30,2 30 29,2 28,7 27 24,8 23,6
40,2 40 39,8 39,5 39 38,5 38,2 37,5 36 34,5 33,5 26,9
52 52 51,5 50,5 50 49 48,5 47,5 45 42,5 41
58 58 57,5 57 56,5 56 55 54,5 53 51 49
70 70 70 68,5 69 68,8 68,5 67,5 66 64 63 57
83 82,5 82,5 82 81,5 81 80 79 76,5 73,5 72 60
92,5 92 92 91,5 91,5 91 90 89,5 87,5 85 83 72,5
101,6 101,5 101,3 101,1 100,7 100,3 99,7 99,1 98,3 97,4 95,4 92,9 91,5 83,2
15 14,6 14,2 13,7 13,3 12,8 12,3 11,7 11 10 9,3 8
19 18,9 18,7 18,4 18,1 17,5 17,2 16,9 16,5 15,8 14,5 13 12
23,1 23 22,8 22,6 22,5 22 21,6 21,1 20,7 20,2 19 17,5 14,8 12
22 21,4 20,1 20 17,4 16,8 12
29 28,4 27,5 27 24,5 21,3 18,3
34,3 33,6 32,6 32,3 29,8 26,8 23,6 20
37,2 36,8 36 35,5 33,5 30,8 27,5 24
48,5 48,2 47,5 47 44,7 41 36 29
58 57,5 57,2 57 55 52 48 43
65,5 65 64 63 61,9 58,9 55,5 50,6 44,2
83,7 83,7 83,7 83,2 80,7 77,3 72,8 66,4 59,5
45 44 42 39 37 34,5 31 28
51 50 48,5 46 44 42 39 35 31,5
57 56 55 53 51 49 46 43 39 36
131
Circuladoras Instalaciones Domsticas
Serie EVOSTA
Aplicaciones: Applications:
Bomba de recirculacin de agua caliente para instalaciones do- Circulation pump for domestic hot water central hea-
msticas de calefaccin centralizadas, de tipo cerrado y presuri- ting, sealed and pressurized type, or open tank, thanks
zado, o de vaso abierto; que gracias al variador de frecuencia to built-in frequency inverter, provides a great effi-
incorporado, proporciona una gran eficiencia en trminos de ciency in terms of energy saving.
ahorro energtico.
Construction characteristics:
Caractersticas Constructivas: Motor housing in cast iron, aluminum motor housing,
Cuerpo motor en fundicin de hierro, carcasa motor en aluminio, techno polymer impeller, shaft-rotor and rotor protec-
turbina en tecnopolmero, eje-rotor y camisa proteccin del rotor tion sleeve in stainless steel, ceramic ring and ring clo-
en acero inoxidable, anillo en cermica y anillo cierre en etileno sure of ethylene and propylene.
propileno.
Operating range:
Motor: Permanent magnet synchronous motor, controlled by
Motor sncrono de imanes permanentes, regulado mediante frequency inverter.
variador de frecuencia. Supply Voltage: Single phase 230V 50/60Hz
Voltaje de alimentacin: Monofsico 230V 50/60Hz Performance field: 0 to 3 m3/h with heights up to 6.9
Campo de prestaciones: 0 a 3 m3/h con alturas hasta 6,9 me- meters
tros Liquid temperature range: +2 C to +95 C
Campo de temperatura del lquido: de +2C a +95C Pumped liquid: clean, free from solid substances, not
Lquido bombeado: Limpio y libre de sustancias slidas, no viscous, chemically neutral.
viscoso, qumicamente neutro. Protection and insulation: IP44 - Class F
Grado de proteccin y aislamiento: IP44 Clase F Racords not included.
Racores no incluidos.
Datos Elctricos
Distancia Peso
Tipo Rcores Presin Mnima
Distance Voltaje P1 Int. Weight
Type Connections Minimum pressure
mm. V W A Kg.
Aplicaciones: Applications:
Bomba de recirculacin de agua caliente para instalaciones do-
msticas de calefaccin centralizadas, de tipo cerrado y presuri-
zado, o de vaso abierto; que gracias al variador de frecuencia
Circulation pump for domestic hot water central hea-
ting, sealed and pressurized type, or open tank, thanks
to built-in frequency inverter, provides a great effi-
I
incorporado, proporciona una gran eficiencia en trminos de ciency in terms of energy saving.
ahorro energtico.
Construction characteristics:
Caractersticas Constructivas: Motor housing in cast iron, aluminum motor housing,
Cuerpo motor en fundicin de hierro, carcasa motor en aluminio, techno polymer impeller, shaft-rotor and rotor protec-
turbina en tecnopolmero, eje-rotor y camisa proteccin del rotor tion sleeve in stainless steel, ceramic ring and ring clo-
en acero inoxidable, anillo en cermica y anillo cierre en etileno sure of ethylene and propylene.
propileno.
Operating range:
Motor: Permanent magnet synchronous motor, controlled by
Motor sncrono de imanes permanentes, regulado mediante frequency inverter.
variador de frecuencia. Supply Voltage: Single phase 230V 50/60Hz
Voltaje de alimentacin: Monofsico 230V 50/60Hz Performance field: 0.4 to 4.2 m3/h with heights up to
Campo de prestaciones: 0,4 a 4,2 m3/h con alturas hasta 8 8 meters
metros Liquid temperature range: -10 C to +110 C
Campo de temperatura del lquido: de -10C a +110C Pumped liquid: clean, free from solid substances, not
Lquido bombeado: Limpio y libre de sustancias slidas, no vis- viscous, chemically neutral. Maximum 30% glycol.
coso, qumicamente neutro. Cantidad mxima de 30% de glicol. Protection and insulation: IP44 - Class F
Grado de proteccin y aislamiento: IP44 Clase F Racords not included.
Racores no incluidos.
133
Circuladoras Domsticas
Serie EVOTRON
EVOTRON 40
H (m)
4,5
3,5
3 Ma
x
2,5
1,5
0,5
Min
0
0 0,5 1,0 1,5 2,0 2,5 3,0 Q (m3/h)
EVOTRON 60
H (m)
4
Ma
x
3
Min
0
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Q (m3/h)
EVOTRON 80
H (m)
6
Ma
x
5
1
Min
0
0 0,5 1 1,5 2 2,5 3 3,5 4 4,5 Q mh
Datos Elctricos
Distancia Peso
Tipo Rcores Presin Mnima
Distance Voltaje P1 Int. Weight
Type Connections Minimum pressure
mm. V W A Kg.
Aplicaciones: Applications:
Bombas circuladoras electrnicas, que pueden ser utilizadas
para calefaccin, ventilacin y sistemas de aire acondicionado en
colegios, comunidades de vecinos, etc Gracias al variador
Electronic circulation pumps, which can be used for
heating, ventilation and air conditioning systems in
schools, condominiums, etc. Thanks to the built-in
I
de frecuencia incorporado, reducen considerablemente el frequency inverter, reduces significantly the noise
ruido en la instalacin as como los costes de funcionamiento, in the installation and reduces the operation costs,
proporcionando una gran eficiencia en trminos de ahorro ener- providing a great efficiency in terms of energy saving.
gtico.
Construction characteristics:
Caractersticas Constructivas: Motor housing in cast iron, aluminum motor housing,
Cuerpo motor en fundicin de hierro, carcasa motor en aluminio, techno polymer impeller, shaft-rotor and rotor protec-
turbina en tecnopolmero, eje-rotor y camisa proteccin del rotor tion sleeve in stainless steel, ceramic ring and ring clo-
en acero inoxidable, anillo en cermica y anillo cierre en etileno sure of ethylene and propylene.
propileno.
Operating range:
Motor: Permanent magnet synchronous motor, controlled by
Motor sncrono de imanes permanentes, regulado mediante inverter.
variador de frecuencia. Supply Voltage: Single phase 230V 50/60Hz
Voltaje de alimentacin: Monofsico 230V 50/60Hz Performance field: 0.5 to 18 m3/h with heights up to
Campo de prestaciones: 0,5 a 18 m3/h con alturas hasta 12 12 meters
metros Liquid temperature range: -10 C to +110 C
Campo de temperatura del lquido: de -10C a +110C Pumped liquid: clean, free from solid substances, not
Lquido bombeado: Limpio y libre de sustancias slidas, no vis- viscous, chemically neutral. Maximum 30% glycol.
coso, qumicamente neutro. Cantidad mxima de 30% de glicol. Protection and insulation: IP44 - Class F
Grado de proteccin y aislamiento: IP44 Clase F Racords not included.
Racores no incluidos.
135
Circuladoras Pequeas Instalaciones Colectivas
Serie EVOPLUS SMALL
EVOPLUS 60/180 XM EVOPLUS 80/180 XM
10 - 10 -
8- 8-
6- 6-
4- 4-
2- 2-
0- 0-
0 1 2 3 4 5 6 7 8 9 10 11 Q m3/h 0 2 4 6 8 10 12 Q m3/h
Tipo
Type
Distancia
Distance
Rcores
Connections Voltaje
Datos Elctricos
P1 EEI
Presin
Mnima
Minimum
Peso
Weight
I
mm. V W max pressure
Kg.
Aplicaciones: Applications:
Bombas circuladoras electrnicas, que pueden ser utilizadas Electronic circulation pumps, which can be used for
para calefaccin, ventilacin y sistemas de aire acondicionado en heating, ventilation and air conditioning systems in
edificios comerciales o residenciales, tales como hospitales, commercial or residential buildings, such as hospitals,
edificios de oficinas, etc Gracias al variador de frecuencia office buildings, etc. Thanks to the built-in frequency
incorporado, reducen considerablemente el ruido en la insta- inverter, reduces significantly the noise in the installa-
lacin as como los costes de funcionamiento, proporcionando tion and reduces the operation costs, providing a great
una gran eficiencia en trminos de ahorro energtico. efficiency in terms of energy saving.
138
Circuladoras Calefaccin - Refrigeracin
Serie EVOPLUS
EVOPLUS B 40/220.40 M - EVOPLUS D 40/220.40 M EVOPLUS B 60/220.40 M - EVOPLUS D 60/220.40 M
139
Circuladoras Calefaccin - Refrigeracin
Serie EVOPLUS
EVOPLUS B 60/240.50 M - EVOPLUS D 60/240.50 M EVOPLUS B 80/240.50 M - EVOPLUS D 80/240.50 M
140
Circuladoras Calefaccin - Refrigeracin
Serie EVOPLUS
EVOPLUS B 80/340.65 M - EVOPLUS D 80/340.65 M EVOPLUS B 100/340.65 M - EVOPLUS D 100/340.65 M
141
Circuladoras Calefaccin - Refrigeracin
Serie EVOPLUS
142
Circuladoras Calefaccin - Refrigeracin
Serie EVOPLUS
Datos Elctricos Presin
Distancia Peso
Tipo Rcores Mnima
Distance Voltaje P1 EEI Weight
Type Connections Minimum
mm. V W max pressure
Kg.
Aplicaciones:
Bomba de circulacin para instalaciones de agua caliente
sanitaria de tipo cerrado o a vaso abierto.
Applications:
Caractersticas Constructivas: Pump for circulating hot domestic water in closed and
Cuerpo Bomba en bronce, carcasa motor en aluminio, turbina pressurised or open tank systems.
en tecnopolmero, eje rotor, camisa de proteccin del rotor y Also suitable for solar power systems.
disco cierre en acero inoxidable.
Anillo en cermica y anillo sello en etilenopropileno. Construction characteristics:
Motor, asncrono de rotor hmedo sin sello mecnico. Single body comprising bronze hydraulic unit and wet
Rotor montado sobre cojinetes en grafito. rotor motor. Die-cast aluminium motor casing. Tech-
Campo de prestaciones: de 0,5 a 5m3/h hasta 6,5 m.c.a. nopolymer impeller. Ceramic driving shaft mounted
Campo de temperatura del lquido: +2 C a +110 C. on graphite bearings lubricated by the pumped liquid.
Lquido bombeado: Stainless steel protective rotor sleeve, stator sleeve
Limpio, libre de sustancias slidas, no viscoso, no cristalizado and closing flange. Ceramic thrust bearing, E.P.D.M.
y neutro. O-rings and brass air outlet cap.
Mxima presin de ejercicio: 10 bar (1000K Pa). Two or four pole asynchronous motor with squirrel cage
Mnima presin de ejercicio: rotor. Motor self-protected against resistance. No over-
valores a Q mx. y temp. del lquido a +90 C: 2,5 mts. load protection required.
Grado de proteccin: IP-41 Protection level: IP 44. Insulating class: F
Clase de aislamiento: F. Rated voltage: single-phase 230 V / 50 Hz
Racores no incluidos. Racords not included.
144
Centrfugas Circuladoras
Serie ALM-ALP
Aplicaciones:
Bomba de circulacin para instalaciones de calefaccin,
refrigeracin y agua caliente sanitaria de tipo cerrado o a vaso
abierto.
Caractersticas Constructivas:
Cuerpo bomba y soporte motor en fundicin para ALM 500 - Applications:
ALP 2000, en bronce para los modelos ALM 200 - ALP 800. Cirtculation pump for hot or cold water in-line connec-
Turbina en Tecnopolmero B, sello mecnico en carbn/cer- tions, suitable for installation in series directly to the pi-
mica. Eje Rotor en acero inoxidable. ping in civil and industrial heating, conditioning and hot
water plants.
Motor de tipo asncrono, cerrado y refrigerado a ventilacin ex-
terna a 4 polos para las ALM y a 2 polos para las ALP.
Constructional features of the pump
Proteccin Termoamperimtrica y condensador permanente in- Pump body and motor support in cast iron for ALM 500
corporado en versin monofsica. and ALP 2000, and in bronze for ALM 200 and ALP 800.
Construccin SEGUN NORMATIVAS CEI. Intake and delivery connection: 1 1/2 M-GAS for ALM
Campo de Prestaciones: de 2 a 8,5 m3/h. hasta 20 mts. 200 and ALP 800 and 2 M-GAS for ALM 500 and ALP
Lquido de Bombeado: Limpio, sin sustancias slidas, no vis- 2000. Technopolymer impeller. carbon/ceramic mecha-
coso, no cristalizado y qumicamente neutro. nical seal. Constructional features of the motor. Induc-
Campo de Temperatura del lquido: de -15 C a + 120 C. tion motor, closed and cooled with external ventilation,
four-pole for the ALM version and two-pole for the ALP
Mxima Temperatura ambiente: + 40 C.
version.
Mxima Presin de Trabajo: 10 bar (1.000 Kpa).
Rotor mounted on oversized, greased-for-life ball bea-
Grado de Proteccin: IP-44. rings to guarantee silent running and long life.
Cuadro de Aislamiento: F. Manufactured according to: CEI 2-3 standards
Racores no incluidos. Racords not included.
7
ft
25
m
20
18
ft
60
I
ALP 800 16 ALP 2000
6 20 50
14
5 12 40
15
4 10
30
8
3 10
6 20
2 ALM 500
ALM 200 5 4
1 10
2
0 0 0 0
0 1 2 3 4 5 6 7 8 Qm3/h 0 1 2 3 4 5 6 7 8 Qm3/h
Aplicaciones:
Bomba de circulacin para instalaciones de calefaccin, refrige-
racin y agua caliente sanitaria de tipo cerrado o a vaso abierto.
Caractersticas Constructivas:
Cuerpo bomba y soporte motor en fundicin. Turbina en
tecnopolmero B, sello mecnico en carbn/cermica. Eje
rotor en acero inoxidable.
Motor tipo asncrono, cerrado y refrigerado a ventilacin ex-
terna a 4 polos para las KLM y a 2 polos para las KLP. Applications: Cirtculation pump for hot or cold water
Proteccin term-amperimtrica y condensador permanente in-line connections, suitable for installation in series di-
incorporado en versin monofsica. rectly to the piping in civil and industrial heating, condi-
Construccin segn Normativas CEI. tioning and hot water plants.
Campo de prestaciones: de 2 a 70 m3/h hasta 12 mts.
Constructional features of the pump: Pump body
Lquido bombeado: and motor support in cast iron. Flanged suction and
Limpio, sin sustancias slidas, no viscoso, no cristalizado y delivery connections in PN 10 with threaded holes for
qumicamente neutro. control pressure gauges. This range can also accept
Campo de temperatura del lquido: de -15 C a + 120 C. counterflanges in PN 6 in order to faciliate pump inter-
Mxima temperatura ambiente: + 40 C change in existing installations.
Mxima presin de trabajo: 10 bar (1000 Kpa). Technopolymer impeller. Carbon/ceramic mechanical
Grado de proteccin: IP 44 caja bornes IP 55 (DN 50-65-80) seal. The twin version allows the pumps to be used
Grado de aislamiento: F. alternately where a backup unit is required or used si-
multaneosly.
DN 40 DN 50
H H H H
m ft m ft
40 40
12 12
35 50/1200 35
10 10
40/900 30 30
8 8 50/900
25 25
40/600
6 20 6 20
15 15
4 4 50/600
10 10
40/300
2 2 50/300
5 5
0 0 0 0
0 2 4 6 8 10 12 14 16 18 Q m3/h 0 4 8 12 16 20 24 28 32 36 Q m3/h
DN 65 DN 80
I
H H H H
m ft m ft
40 40
12 12
65/1200 80/1200
35 35
10 10
30 30
65/900
8 8 80/900
25 25
6 20 6 20
80/600
65/600 15 15
4 4
10 10
65/300 80/300
2 2
5 5
0 0 0 0
0 4 8 12 16 20 24 28 32 36 40 44 48 Q m3/h 0 10 20 30 40 50 60 70 80 Q m3/h
147
Serie Circuladoras
Serie CM
CM - 40 CM - 50
148
Serie Circuladoras
Serie CM
CM - 65
CM - 80 CM - 100
CM - 125 CM - 150
149
Serie Circuladoras
Serie CM
150
Serie Circuladoras
Serie CM
Aplicaciones: Motor de tipo asncrono, cerrado y refrigerado a ventilacin ex-
Bomba de circulacin para instalaciones de calefaccin, refri- terna a 2 polos. CONSTRUCCIN SEGUN NORMATIVAS CEI.
geracin y agua Campo de Prestaciones: e 6 a 420 m3/h hasta 102 mts.
caliente sanitaria de tipo cerrado o a vaso abierto. Lquido Bombeado: Limpio, sin sustancias slidas, no viscoso,
no cristalizado
Caractersticas Constructivas: Campo de Temperatura del lquido: de -15 C a + 120 C.
Cuerpo bomba, soporte motor, tapa ventilador en fundicin. Mxima Temperatura ambiente: + 40 C.
turbina en fundicin Mxima Presin de Trabajo: 16 bar (1.600 Kpa).
o tecnopolmero segn modelos. Grado de Proteccin: IP-44 caja bornes IP-55. -Grado de Ais-
Sello mecnico en carbn/cermica. lamiento: F.
Eje Rotor en acero inoxidable.
Datos Elctricos Entre
Tipo Alimentacin Peso
BRIDAS r.p.m. P1 mx P2 NOMINAL Cons. Ejes
Type 50 HZ HP KW Kg.
1/min. W A mm.
CP 40/1900 T 3 x 230/400 V DN 40 2910 1,1 1 0,8 4,5 - 2,6 390 35,3
CP 40/2300 T 3 x 230/400 V DN 40 2870 1,5 1,5 1,1 5,2 - 3 390 35,8
CP 40/2700 T 3 x 230/400 V DN 40 2850 1,9 2 1,5 6,4 - 3,7 390 35,1
CP 40/3500 T 3 x 230/400 V DN 40 2880 2,6 3 2,2 9 - 5,2 390 36,9
CP 40/3800 T 3 x 230/400 V DN 40 2900 3,6 4 3 11 - 6,4 380 30
CP 40/4700 T 3 x 230/400 V DN 40 2900 4,9 5,5 4 15,2 - 8,8 380 30
CP 40/5500 T 3 x 400 V DN 40 2900 6,6 7,5 5,5 11,3 425 39
CP 40/6200 T 3 x 400 V DN 40 2900 9,2 10 7,5 15,8 425 39
CP 50/2200 T 3 x 230/400 V DN 50 2870 1,5 1,5 1,1 5 - 2,9 425 38,6
CP 50/2600 T 3 x 230/400 V DN 50 2860 1,9 2 1,5 6,2 - 3,6 425 38,5
CP 50/3100 T 3 x 230/400 V DN 50 2870 2,6 3 2,2 9 - 5,2 400 36
CP 50/4100 T 3 x 400 V DN 50 2910 3,8 5,5 4 7,4 400 36
CP 50/4600 T 3 x 400 V DN 50 2900 6,6 7,5 5,5 11,3 360 46
CP 50/5100 T 3 x 400 V DN 50 2900 9,2 10 7,5 15,8 360 46,1
CP 50/5650 T 3 x 400 V DN 50 2900 9,2 10 7,5 15,8 360 57,9
CP 65/1470 T 3 x 230/400 V DN 65 2804 2 2 1,5 6,2 - 3,6 360 59,1
CP 65/1900 T 3 x 230/400 V DN 65 2790 2,6 3 2,2 7,5 - 4,3 360 67,6
CP 65/2280 T 3 x 400 V DN 65 2856 3,7 4 3 6,5 360 80,6
CP 65/2640 T 3 x 400 V DN 65 2844 4,9 5,5 4 8,6 360 87,1
CP 65/3400 T 3 x 400 V DN 65 2870 6,4 7,5 5,5 10,6 360 120,1
CP 65/4100 T 3 x 400 V DN 65 2906 8,7 10 7,5 14,8 360 123,7
CP 65/4700 T 3 x 400 V DN 65 2930 12 15 11 21 - 12,2 475 195,8
CP 65/5500 T 3 x 400 V DN 65 2920 17 20 15 28,8 475 213,8
CP 65/6150 T 3 x 400 V DN 65 2946 21 25 18,5 34,7 475 230,9
CP 65/6750 T
CP 65/7350 T
CP 65/9250 T
3 x 400 V
3 x 400 V
3 x 400 V
DN 65
DN 65
DN 65
2960
2960
2955
24
24,5
33
30
30
40
22
22
30
39,3
40,3
54,1
475
475
475
230,9
270,6
362,2
I
CP 80/1400 T 3 x 230/400 V DN 80 2910 2,5 3 2,2 7,7 - 4,5 360 81,9
CP 80/1700 T 3 x 400 V DN 80 2845 3,7 4 3 6,8 360 85,7
CP 80/2050 T 3 x 400 V DN 80 2840 5,3 5,5 4 7,8 360 89,8
CP 80/2400 T 3 x 400 V DN 80 2870 6,4 7,5 5,5 10,8 360 124,4
CP 80/2770 T 3 x 400 V DN 80 2913 8,7 10 7,5 14 440 126,8
CP 80/3250 T 3 x 400 V DN 80 2930 12 15 11 21 - 12,2 440 84,5
CP 80/4000 T 3 x 400 V DN 80 2920 17 20 15 28,8 440 89,6
CP 80/5150 T 3 x 400 V DN 80 2946 21 25 18,5 34,7 500 128
CP 80/5650 T 3 x 400 V DN 80 2960 24 30 22 39,3 500 197,3
CP 80/6850 T 3 x 400 V DN 80 2955 33 40 30 54,1 500 243
CP 80/8600 T 3 x 400 V DN 80 2945 42 50 37 70 620 180,4
CP 80/9600 T 3 x 400 V DN 80 2970 49 60 45 78,2 620 286,6
CP 80/10200 T 3 x 400 V DN 80 2970 59 75 55 95,9 620 440,1
CP 100/1600 T 3 x 400 V DN 100 2844 4,9 5,5 4 8,6 500 93,1
CP 100/1950 T 3 x 400 V DN 100 2870 6,4 7,5 5,5 10,6 500 105,1
CP 100/2350 T 3 x 400 V DN 100 2906 8,7 10 7,5 14,8 500 97,5
CP 100/2400 T 3 x 400 V DN 100 2930 12 15 11 21 - 12,2 550 106,6
CP 100/3050 T 3 x 400 V DN 100 2920 17 20 15 28,8 550 188,1
CP 100/3550 T 3 x 400 V DN 100 2946 21 25 18,5 34,7 550 218,3
CP 100/3850 T 3 x 400 V DN 100 2960 24 30 22 39,3 550 189,8
CP 100/4800 T 3 x 400 V DN 100 2955 33 40 30 54,1 550 200,7
CP 100/5600 T 3 x 400 V DN 100 2945 42 50 37 70 550 243,1
CP 100/6300 T 3 x 400 V DN 100 2970 49 60 45 78,2 550 276
CP 100/8300 T 3 x 400 V DN 100 2970 59 75 55 95,9 670 178,6
CP 125/4750 T 3 x 400 V DN 125 2945 42 50 37 70 620 268,8
CP 125/5300 T 3 x 400 V DN 125 2970 49 60 45 78,2 620 280,9
CP 125/5800 T 3 x 400 V DN 125 2970 59 75 55 95,9 620 288,9
151
Centrfugas Circuladoras In-Line
Serie CP
CP - 40 CP - 50
CP - 65 CP - 80
CP - 100 CP - 125
152
Accesorios
ACCESORIOS
Caudalmetros 157
Presostatos 158
Manmetros 158
153
Accesorios
Serie E-MOTION
Descripcin: Description:
El nuevo variador de frecuencia [e]MOTION es un sistema de The new frequency inverter [e]MOTION is a new con-
control a travs de la modulacin de frecuencia o velocidad para trol System by frequency or speed modulation to get
conseguir un gran confort y reducir al mximo los costes ener- great comfort and minimize the energy costs plus the
gticos, adems de los siguientes beneficios: following benefits:
- Presin totalmente fija - Extremely fixed pressure
- Ahorro energtico - Energy saving
- Trabajo muy silencioso - Very silent working
- Conectividad total - Full connectivity
- Versatilidad total - Full versatility
- Puesta en marcha extremadamente simple - Start-up extremely simple
- Protege la instalacin - Protect the installation
- Gran display LCD - Big LCD display
Descripcin: Description:
El VARIO PRO, es un sistema compacto para el control de bom- The VARIO PRO is a compact system drive for the con-
bas a velocidad variable, cuya misin es mantener en la ins- trol of variable speed pumps, whose mission is to main-
talacin una presin constante independientemente del caudal tain the installation in a constant pressure regardless of
requerido. flow required.
Aplicaciones: Applications:
Los controladores de presin Presscontrol-Mascon- Presscontrol Mascontrol Controlpress pressure
trol-Controlpress son unos presurizadores de nueva con- controllers are pressurisers with a new conception, fi-
cepcin equipados con un sistema electrnico estudiado para tted with an electronic system intended to order the
ordenar los datos de presin y flujo procedentes de una onda pressure and flow data of a magnetic wave emitted by
magntica emitida por un sensor. Este exclusivo sistema con- a sensor. This exclusive system automatically controls
trola automticamente el funcionamiento de la electrobomba the working of the electropump to maintain a constant
para mantener una presin y caudal constante, evitando de pressure and flow, thus avoiding the annoying pressure
esta manera la fastidiosa variacin de presin que se produce changes that occur in traditional systems with an accu-
en los sistemas tradicionales con depsito acumulador. mulator tank.
El Controlpress es un sistema de control para electrobom- CONTROLPRESS is an electronic sytem, that permits
bas que, adems de las caractersticas de los anteriores the regulation (reducing) of the maximum pressure of
dispositivos permite la regulacin (reduccin) de la presin the pump
mxima generada por la bomba hasta llegar al valor de pre-
sin deseado. Construction:
IP-65 protection.
Caractersticas constructivas: The Presscontrol, Mascontrol and Controlpress have
Grado de Proteccin IP-65. a small panel on the front of the apparatus with light
El Presscontrol, Mascontrol y el Controlpress equipan un pe- indicators for:
queo panel en la parte frontal de aparato con indicadores - Turned on
luminosos de: - Pump running
- Conectado a tensin - Failure (empty water or overload)
- Bomba en marcha
- Fallo (por falta de agua o sobre consumo) Elimination of water hammer shock absorber knock
by means of a gauged regulator spring.
Eliminacin del golpe de ariete gracias a un muelle regu-
lador tarado. Automatic pump stop in the event of a lack of water,
preventing the dry working that causes breakdowns
Paro automtico de la bomba en caso de falta de agua,
evitando el funcionamiento en seco, que producira ave-
ras.
Frecuencia / Frecuency 50-60 Hz. 50-60 Hz. 50-60 Hz. El desnivel desde el aparato hasta el punto ms alto de
utilizacin no debe superar los 15 m.c.a.
Campo regulacin de la presin - - 2,5 - 7 bar
No necesita ninguna regulacin ni mantenimiento
Presin mx. admitida / max. press. 10 bar 10 bar 10 bar
THE MAXIMUM HEIGHT TO THE HIGHER POINT OF THE
Conexiones / Conections 1 11/4 11/4 INSTALATION CAN NOT BE HIGHER THAN 15 m.c.a.
Presin arranque 1,5 bar 1,5 bar 1,5 bar
156
Accesorios
Serie ACCESORIOS
CAUDALMETRO
Depsitos
Tipo / Type tanks lts.
FLOW METER
Capacidad
Capacity lts.
Presin
Pressure bar
4
6
120.000
234.000
30.000
54.000
J
0,16 16 8 432.000 108.000
25
50
100 20
200
350
CIERRES MECANICOS
MECHANICAL SEAL
EMPALME TERMORRETRACTIL
LIMITES APLICACION
PARA CABLES
DE 8 A 25
157
Accesorios
Serie PRESSCONTROL-MASCONTROL-CONTROLPRES
SQUARE D
Tipo Reg. Kgs/cm2 Conexin Descripcin
TELEMECANICA
Tipo Reg. Kgs/cm2 Conexin
TELEM 6 Kg. 0,9 - 6
1/4 Gas
TELEM 12 Kg. 1,3 - 12
SACI
Tipo Reg. Kgs/cm2 Conexin
SK-2 1,4 - 4,6 1/4 Gas
MANOMETRO / MANOMETER
NORMAL Y GLICERINA
0 - 10 Kg./cm2
RACOR 5 VIAS
5 WAY FITTING
INTERRUPTOR DE BOYA / SWITCH LEVEL
SACI - 2
LLENADO O VACIADO
DE DEPOSITOS
Aplicaciones: Applications:
Equipos de osmosis inversa domsticos para la produccin The domestic reverse osmosis are ideal to have water
de agua con un bajo contenido en sales, libre de virus y con- with low content of salt, free of viruses and toxic qui-
taminantes qumicos. mical products.
Caractersticas: Characteristics:
Equipos de funcionamiento automtico sin electricidad. Grifo Automatic filtration without electricity. Chromium-pla-
dispensador cromado de cao largo. Acumulador de mem- ting long neck tap. Membrane accumulator in polypro-
brana en polipropileno, para acumulacin del agua osmoti- pilene, to storage osmotizated water. Capacity 11 lts/m
zada. Capacidad 11 lts. a 3,5 kg/cm2. Racords de conexin at 3,5 Kg/cm2. includes fast connections, and are pre-
rpidos. Completamente ensamblados. Incluyen tubos y ac-
cesorios de instalacin. Relacin Rechazo-Producto 3-1. Sa-
linidad mxima 2.500 mg/l. Lmites presin de trabajo 2,5-6
sented completely assembled.
The relation between rejected and product is a 3 to 1.
The maximum saliniti 2.500 mg/l.
K
bar. Temperatura de trabajo 5 a 35 C. El rendimiento de los Pressure limits go to from 2,5 bar to 6 bar.
equipos es variable en funcin de distintos parmetros como Water temperature 5 -35 C.
la presin, temperatura, salinidad del agua y estado de los The rendiment of set may vary depending on different
distintos elementos. factors such as pressure, temperature, salinity, etc...
159
Descalcificadores
Serie DESCALCIFICADORES
Descalcificador By-bloc
Descalcificador Compacto
Robosoft 24
Aplicaciones: Applications:
El agua en su ciclo hidrolgico al filtrarse en la tierra o escu- In its cycle, when it filters into the land or drains off,
rrirse, disuelve las sales minerales que constituyen su salini- water dissolves the mineral salts that make up its sali-
dad. Parte de estas sales (clcicas y magnsicas) son causa nity. Part of these salts (calcium and magnesium salts)
de la dureza, que es causa de graves problemas, incrustacio- are the cause of hardn ess which is responsible for
nes y averas en las tuberas e instalaciones, ropa spera, piel serious problems, incrustations and faults in pipes and
seca, lavados, aclarados y acabados deficientes, electrodo- installations, rough clothes, dry skin, deficient washing,
msticos deficientes son prueba de ello. Los descalcificado- rinsing and finishing, faulty household electrical applian-
res de Bombas Saci han sido construidos con componentes ces are a sign of this. Bombas Saci softener have been
de gran robustez y fiabilidad. Diseados y optimizados para manufactured with strong, reliable components. Desig-
responder a todas las necesidades domsticas y profesiona- ned and optimised to respond to all possible domestic
les que puedan presentarse, garantizan plenamente la satis- and professional requirements, fully guarantee satisfac-
faccin de su eleccin. tion in your choice.
nuestra instalacin.
C
B B
K
D
LONGITUD CONEXIONES
PORTACARTUCHOS
10 1
1. Polipropileno bobinado: cartucho apropiado para uso ali- 1. Reeled polypropylene: a cartridge suitable for use
mentario, cuya funcin bsica es la de suprimir las partculas with foodstuffs, the basic function of which is to elimi-
en suspensin como arena, xido, etc. nate the particles in suspension, such as sand, rust, etc.
2. Malla lavable: cartucho apropiado para uso alimentario, 2. Washable mesh: a cartridge suitable for use with
cuya funcin bsica es la de suprimir las partculas en sus- foodstuffs, the basic function of which is to eliminate
pensin como arena, xido, etc. Su ventaja principal estriba particles in suspension, such as sand, rust, etc. The main
en que es lavable. advantage lies in the fact that it is washable.
3. Carbn activo: cartucho apropiado para uso alimentario, 3. Active carbon: a cartridge suitable for use with
cuya funcin bsica es la de depurar y declorar las sustancias foodstuffs, the basic function of which is to purify and
qumicas disueltas en el agua, evitando de esta manera, los dechlorinate the chemical substances dissolved in the
olores y sabores producidos por estas. water, thus preventing the smells and tastes caused
4. Polifosfatos: el agua en contacto con los polifosfatos sufre by them.
un tratamiento que elimina los nefastos efectos de la cal. Es 4. Polyphosphates: the water in contact with the
aconsejable su instalacin a la salida de descalcificadores. polyphosphates undergoes a treatment that eliminates
the harmful effects of lime. It should be installed on the
outlet of decalcifiers.
163
Depsitos de Membrana
Serie EVOLUTION
Fig. B
Fig. A Fig. C
Depsitos de membrana fabricada en EPDM, atxica e Membrane tanks manufactured with EPDM membra-
intercambiable, especial para uso alimentario y circuitos de ne, non-toxic and interchangeable, especially for food use
calefaccin. Estan construidos en chapa de acero embutido and hot water circuits. They are constructed of pressed
con acabado fosfatado pintado y secado. steel, painted with exterior trim drying and phosphate.
Temperatura mxima de servicio: de -5C hasta 100C. Maximum temperature: -5C to +100C.
Los acumuladores de ms de 100 litros (incluido) se suminis- All tank with more than 100 liters (included) are su-
tran de serie con manmetro para fcil lectura de la presin. pplied, as standard, with pressure gauge for easy pres-
Bajo demanda pueden suministrarse para presiones de sure reading.
16 bar o de 25 bar. On request can be supplied for pressures of 16 bar
or 25 bar.
Acumuladores Capacidad Presin Mxima Dimensiones / Dimensions Salida Figura Peso Volumen
Accumulators Capacity Max. pressure bar A mm. H mm. Outlet Figure Weight Volume
EVO 8 EXP 8 lts 200 320 1 A 2,9 Kg. 0,016 m3
EVO 12 EXP 12 lts 220 380 1 A 3,8 Kg. 0,018 m3
EVO 19 EXP 19 lts 280 430 1 A 4 Kg. 0,034 m3
10 bar
EVO 24 EXP 24 lts 280 470 1 A 4,5 Kg. 0,037 m3
EVO 35 EXP 35 lts 380 470 1 A 7,5 Kg. 0,068 m3
EVO 50 EXP 50 lts 380 560 1 A 8,5 Kg. 0,081 m3
EVO 50-16 EXP 50 lts 16 bar 380 580 1 A 14 Kg. 0,084 m3
EVO 50 VER 50 lts 380 750 1 B 11 Kg. 0,108 m3
EVO 80 VER 80 lts 430 960 1 B 17 Kg. 0,161 m3
EVO 100 VER 100 lts 460 990 1 B 18 Kg. 0,209 m3
EVO 150 VER 150 lts 500 1100 1 B 29 Kg. 0,280 m3
EVO 200 VER 200 lts 590 1120 11/4 B 38 Kg. 0,390 m3
EVO 300 VER 300 lts 640 1230 11/4 B 45 Kg. 0,504 m3
EVO 500 VER 500 lts 750 1550 11/4 B 75 Kg. 0,872 m3
10 bar
EVO 750 VER 750 lts 750 1950 2 B 110 Kg. 1,248 m3
EVO 1000 VER 1000 lts 800 2180 2 B 155 Kg. 1,408 m3
EVO 1500 VER 1500 lts 960 2380 2 B 230 Kg. 2,212 m3
EVO 24 HOR 24 lts 470 280 1 C 4 Kg. 0,037 m3
EVO 50 HOR 50 lts 620 380 1 C 10,5 Kg. 0,084 m3
EVO 80 HOR 80 lts 720 430 1 C 17 Kg. 0,133 m3
164 EVO 100 HOR 100 lts 800 460 1 C 23 Kg. 0,169 m3
Depsitos de Membrana Recambiable
Serie IDROPRESS - EXPANSORES
MEMBRANA RECAMBIABLE.
HOMOLOGADOS POR EL MINISTERIO DE INDUSTRIA Y CONFORMES A LA DIREC-
TIVA 97/23/CE.
TEMPERATURA MXIMA DE SERVICIO: 100 C
Construidos en chapa de acero embutido con acabado exte- Replaceable bladder hidropneumatic tanks with sinthe-
rior fosfatado pintado y secado. Versiones inox. en chapa de tic rubber bladder painted in ral 3013.
acero inox. 304. Con membrana de caucho sinttico, atxica Maximum working temperature: 100 C
e intercambiable. Ideal para uso alimentario.
EXPANSORES DE MEMBRANA
Expansores Presin D Dimetro H - Altura Conexin Figura FIGURA A FIGURA B
Exp. 5 lts. 10 BAR 200 265 1 A D D
Exp. 15 lts. 10 BAR 270 320 1 B
Exp. 25 lts. 8 BAR 350 410 1 A
H H
Exp. 25 lts. inox. 8 BAR 350 410 1 A
Exp. 50 lts. 10 BAR 360 620 1 B
Exp. 50 lts. 16 BAR 360 640 1 B
Construidos en chapa de acero embutido con acabado exte- The correct air pressure for the tanks in the installations
rior fosfatado pintado y secado. should be 0.2 Kg/cm2 below the starting pressure of
the pumps.
This pressure should be checked periodically
L
EXPANSORES DE MEMBRANA HIDROCARBUROS (Gas-oil)
Expansores Presin D Dimetro H - Altura Conexin Figura
2 lts. Gas-oil 3 BAR 230 130 3/4 -
5 lts. Gas-oil 10 BAR 200 265 3/4 A
15 lts. Gas-oil 10 BAR 270 320 3/4 B
25 lts. Gas-oil 8 BAR 350 410 3/4 A
La presin de aire idonea que deben tener los depsitos, debe de ser 0,2 bar inferior a la presin de arran-
que de las bombas. Esta presin debe ser revisada peridicamente.
165
Depsitos de Membrana Recambiable
Serie ACUMULADOR
ACUMULADORES DE MEMBRANA
ACUMULADORES PRESION D DIAMETRO H - ALTURA CONEXION FIGURA
Acum. 50 lts. 360 760 1 D
Acum. 50 lts. inox. 360 760 1 D
Acum. 80 lts. 450 750 1 D
Acum. 100 lts. 450 870 1 D
Acum. 100 lts. inox. 450 870 1 D
Acum. 150 lts. fuelle 485 1.080 1 1/4 E
10 BAR
Acum. 200 lts. fuelle 550 1.075 1 1/4 E
Acum. 300 lts. fuelle 650 1.178 1 1/4 E
Acum. 500 lts. 600 2.065 11/2 F
Acum. 500 lts. fuelle 750 1.450 11/2 E
Acum. 700 lts. 700 2.085 11/2 F
Acum. 700 lts. fuelle 8 BAR 800 1.700 11/2 E
Acum. 900 lts. 800 2.155 11/2 F
Acum. 1.400 lts. 1.000 2.320 2 F
10 BAR
Acum. 2.000 lts. 1.200 2.630 DN 80 F
Acum. 3.000 lts. 1.200 3.630 DN 80 F
166
Vasos Expansin
Serie CALEFACCIN
Vasos de Expansin de membrana fija destinados a tra- Fixed bladder expansion vessel are designed for wor-
bajar en inst. de calefaccin y refrigeracin para absorber king in water heating and cooling systems to absorve
los aumentos de volumen producidos por la elevacin de la the volume increase when temperature goes up.
temperatura. Construidos en chapa de acero de la calidad
y expesor que responden a las normas Tcnicas exigidas. MANUFACTURED ACCORDING TO THE EURO-
Membrana en SBR. PEAN DIRECTIVE 97/23/CE ON PRESSURE EQUI-
Homologados por el Ministerio de Industria y conformes PMENT.
a la directiva 97/23/CE.
TEMPERATURA MXIMA DEL AGUA: 100 C MAXIMUM WATER TEMPERATURE: 100 C.
SOLAR A.C.S
Vasos de expansin para instalaciones de energa solar en Expansion vessels for solar energy in a closed circuit,
circuito cerrado, tratados con pintura epoxi blanca. Versiones treated with white epoxy paint. Versions with non-repla-
con membrana NO recambiable (hasta 24 litros), y con mem- ceable membrane (up to 24 liters), and with interchan-
brana recambiable (desde 50 litros). geable membrane (for 50 liters or more).
Membrana segn DIN 4807-3 especial para energa solar (No Membrane according to DIN 4807-3 special solar (No
Potable), apta para anticongelantes hasta el 50%. Drinking), suitable for up to 50% antifreeze.
Temperatura del liquido: -10C hasta +100C. Liquid temperature: -10C to +100C
Vasos de expansin para instalaciones de agua caliente sa- Expansion vessels for hot sanity water in a opened
nitaria A.C.S en circuito abierto, tratados con pintura epoxi circuit, treated with white epoxy paint. Non replacea-
blanca. Membrana no recambiable segn DIN 4807 apta para ble membrane according to DIN 4807 special for drink
contener agua potable. water.
Temperatura del liquido: -10C hasta +100C. Liquid temperature: -10C to +100C.
Presin max.
Capacidad D H
de trabajo a-u d V-S b
litros Exterior mm.
BAR
100 10 400 1.090 11/2 - 11/2 1/2
200
300
10
10
500
550
1.385
1.615
11/2
11/2
-
-
11/2
11/2
1/2
1/2
L
500 8 650 1.860 11/2 - 11/2 1/2
750 8 750 2.080 11/2 - 11/2 1/2
1.000 8 800 2.373 11/2 - 11/2 1/2
1.250 8 900 2.380 2 11/2 11/2 1/2
1.500 8 950 2.465 2 11/2 11/2 1/2
2.000 8 1.100 2.490 2 11/2 11/2 1/2
2.500 8 1.100 3.045 21/2 11/2 11/2 1/2
3.000 8 1.200 3.200 21/2 11/2 11/2 1/2
4.000 8 1.400 3.140 4 11/2 11/2 1/2
5.000 8 1.400 3.790 4 11/2 11/2 1/2
169
Depsitos de Membrana Fija
Serie PRESSURE WAVE - CHALLENGER
Serie Challenger
Depsitos de doble membrana fija en butilo de alto grado, no recambiable, aptos para agua caliente/fria.
Carecen de cualquier tipo de mantenimiento, revestimiento exterior en poliuretano sobre base de epoxi.
Conexin de entrada y salida en acero inoxidable. Incluyen vlvula de aire anti-escape.
Tabla de Selec. Eq. C.I. Serie UED 1 Pral. Elctrica y 1 Principal Diesel 191
Tabla de Selec. Eq. C.I. Serie CED 1 Pral. Elctrica y 1 Principal Diesel 195
Cuadros Elctricos
Descripcin: Description:
El nuevo variador de frecuencia [e]MOTION es un sistema de The new frequency inverter [e]MOTION is a new con-
control a travs de la modulacin de frecuencia o velocidad para trol System by frequency or speed modulation to get
conseguir un gran confort y reducir al mximo los costes ener- great comfort and minimize the energy costs plus the
gticos, adems de los siguientes beneficios: following benefits:
- Presin totalmente fija - Extremely fixed pressure
- Ahorro energtico - Energy saving
- Trabajo muy silencioso - Very silent working
- Conectividad total - Full connectivity
- Versatilidad total - Full versatility
- Puesta en marcha extremadamente simple - Start-up extremely simple
- Protege la instalacin - Protect the installation
- Gran display LCD - Big LCD display
Descripcin: Description:
El nuevo variador de frecuencia [e]MOTION es un sistema de The new frequency inverter [e]MOTION is a new con-
control a travs de la modulacin de frecuencia o velocidad para trol System by frequency or speed modulation to get
conseguir un gran confort y reducir al mximo los costes ener- great comfort and minimize the energy costs plus the
gticos, adems de los siguientes beneficios: following benefits:
- Presin totalmente fija - Extremely fixed pressure
- Ahorro energtico - Energy saving
- Trabajo muy silencioso - Very silent working
- Conectividad total - Full connectivity
- Versatilidad total - Full versatility
- Puesta en marcha extremadamente simple - Start-up extremely simple
- Protege la instalacin - Protect the installation
- Gran display LCD - Big LCD display
IMP IMP
M
Altura m.c.a. / Height w.c.m. 3 bb 4 bbs
[e]MOTION V-NOX 403 2 230V 1~ 35 34 33 32 30 28 24 19 12
[e]MOTION V-NOX 404 3 230V 1~ 46 45 44 43 40 36 31 24 14
[e]MOTION V-NOX 405 4 400V 3~ 56 57 55 54 50 46 40 31 18 DN-100 DN-125
[e]MOTION V-NOX 406 4 400V 3~ 70 69 67 65 61 56 49 37 23
[e]MOTION V-NOX 407 5,5 400V 3~ 82 81 79 77 71 65 57 45 28
173
Equipos con 1 Bomba con Variador VARIO PRO
Serie VARIO PRO
Los grupos de presin VARIO PRO han sido diseados y fa- The VARIO PRO pressure units have been de- signed
bricados para satisfacer las necesidades de presin constante and manufactured to satisfy the need for constant
a variaciones de caudal en las ms modernas instalaciones pressure with flow variations in the most modern insta-
incorporando adems ventajas tan excepcionales como un im- llations, also including such exceptional advantages as
portante AHORRO ENERGTICO y un comportamiento ABSO- considerable ENERGY SAVINGS and an ABSOLUTELY
LUTAMENTE SILENCIOSO. SILENT behavior.
Funcionamiento: Operation:
Para empezar a trabajar solo debemos programar la presin de To start work, we just have to program the working
trabajo que deseamos en la instalacin, para lo cual pulsamos pressure we want in the installation, for which we press
dos teclas y la predefinimos en el display. Cuando la presin de two keys and predefine it on the display. When the wor-
trabajo desciende a causa de un consumo de agua, la bomba king pressure falls due to water consumption, the pump
entra en funcionamiento automticamente manteniendo la pre- automatically comes into operation, maintaining an ab-
sin absolutamente constante en la instalacin, a medida que solutely constant pressure in the installation; as we
vamos aumentando la demanda de agua el variador va aumen- increase the demand for water, the inverter increases
tando la frecuencia de la bomba hasta hacerla llegar a su veloci- the frequency of the pump until it reaches its maximum
dad mxima. El grupo parara automticamente en el momento speed. The unit will stop automatically when the wor-
que se supere el valor de presin de trabajo programado en king pressure value is exceeded that is programmed
una secuencia igual pero inversa a la descrita para su arranque. in sequence, the same but inversely to that described
for starting.
En caso de falta de agua en la alimentacin del grupo, el variador
VARIO PRO lo detecta inmediatamente y para la bomba autom- If there is a lack of water in the unit supply, the VARIO
ticamente para evitar daos en el grupo. PRO inverter detects it immediately and stops the
pump automatically to avoid damage to the unit.
Los grupos de presin VARIO PRO han sido diseados y fa- The VARIO PRO pressure units have been de- signed
bricados para satisfacer las necesidades de presin constante and manufactured to satisfy the need for constant
a variaciones de caudal en las ms modernas instalaciones pressure with flow variations in the most modern insta-
incorporando adems ventajas tan excepcionales como un im- llations, also including such exceptional advantages as
portante AHORRO ENERGTICO y un comportamiento ABSO- considerable ENERGY SAVINGS and an ABSOLUTELY
LUTAMENTE SILENCIOSO. SILENT behavior.
Funcionamiento: Operation:
Para empezar a trabajar solo debemos programar la presin de To start work, we just have to program the working
trabajo que deseamos en la instalacin, para lo cual pulsamos pressure we want in the installation, for which we press
dos teclas y la predefinimos en el display. Cuando la presin de two keys and predefine it on the display. When the wor-
trabajo desciende a causa de un consumo de agua, la bomba king pressure falls due to water consumption, the pump
entra en funcionamiento automticamente manteniendo la pre- automatically comes into operation, maintaining an ab-
sin absolutamente constante en la instalacin, a medida que solutely constant pressure in the installation; as we
vamos aumentando la demanda de agua el variador va aumen- increase the demand for water, the inverter increases
tando la frecuencia de la bomba hasta hacerla llegar a su veloci- the frequency of the pump until it reaches its maximum
dad mxima. El grupo parara automticamente en el momento speed. The unit will stop automatically when the wor-
que se supere el valor de presin de trabajo programado en king pressure value is exceeded that is programmed
una secuencia igual pero inversa a la descrita para su arranque. in sequence, the same but inversely to that described
Cuando la primera bomba que arranca alcanza el 100% de su for starting.
rendimiento, automticamente la segunda bomba arranca com- When the first pump which starts reaches 100% of
pensando el dficit de caudal que tenia la primera bomba fun- its performance, the second pump starts automatica-
cionando sla. Despus de detenerse el grupo completo, en el lly compensating the flow deficit which had the first
siguiente arranque se pondr en funcionamiento la bomba que pump working alone. After stopping the whole group,
la vez anterior actuaba como bomba de reserva. the next boot will run the pump than before acted as
En caso de falta de agua en la alimentacin del grupo, el variador standby pump.
VARIO PRO lo detecta inmediatamente y para la bomba autom- If there is a lack of water in the unit supply, the VARIO
ticamente para evitar daos en el grupo. PRO inverter detects it immediately and stops the
pump automatically to avoid damage to the unit.
Tipo
Pot. Alimenta-
cion Entrada 3 6 9
Caudal m3/h / Flow m3/h
12 14 16 18 20 22
Dimetro M
Type
HP Equipo Altura m.c.a. / Height w.c.m. ASP. IMP.
VARIO PRO 2 x V-NOX 303 2 x 1,2 230 V (1~) 39 37 35 32 28 24 20 14 8 11/2 11/4
VARIO PRO 2 x V-NOX 304 2 x 1,5 230V (1~) 51 50 46 42 37 32 26 18 12 11/2 11/4
VARIO PRO 2 x V-NOX 305 2 x 2 230V (1~) 65 62 58 52 46 40 32 24 14 11/2 11/4
VARIO PRO 2 x V-NOX 306 2 x 3 230V (1~) 77 75 70 63 56 48 38 28 16 11/2 11/4
VARIO PRO 2 x V-NOX 307 2 x 3 230V (1~) 90 86 79 70 65 54 42 32 18 11/2 11/4
175
Equipos de Presin
Serie EQUIPOS DE PRESIN
APLICACIONES:
Los equipos de presin son conjuntos diseados para el suministro automtico de agua a presin a distintos tipos de
instalaciones como pueden ser: bloques de viviendas, apartamentos, urbanizaciones, riegos, edificios comerciales,
hoteles, instalaciones deportivas, industrias, etc.
SERIES:
CLCULO DE EQUIPOS:
Para la seleccin del caudal en Equipos de Presin deben seguirse las Normas Bsicas para las Instalaciones Inte-
riores de suministro de Agua OM de 9.12.75 publicada en el BOE el 13.01.1976. Donde se establecen los Caudales
y Presiones necesarias as como los Depsitos de Acumulacin.
APLICATIONS:
The pressure units are units designed to automatically supply pressurised water to different kinds of installations,
such as: housing blocks, apartments, housing estates, irrigation, commercial buildings, hotels, sport installations,
industries, etc.
SERIES
UNIT CALCULATION:
To select the pressure units, it is necessary to follow the Basic Rules for Interior Water Supply Installations OM of
9.12.75 published in the Official State Bulletin on 13.01.1976, establishing the necessary Flows and Pressures and
the Pressure Tanks.
N de viviendas TIPO / TYPE TIPO / TYPE TIPO / TYPE TIPO / TYPE TIPO / TYPE
N of housing A B C D E
Zona sombreada mnimo 2 o ms bombas en paralelo / Needed two or more pumps in paralel
Presin arranque Ha
Presin paro 40 45 50 55 59 63 67 71 75 80 85
A) Localizando sobre las tablas de seleccin adjuntas, las cuales indican el volumen mnimo de depsito de mem-
brana requerido.
PRESIN DE CAUDAL LTS./H.
TRABAJO 2.500 4.000 6.000 8.000 10.000 12.500 15.000 20.000 25.000 30.000
4 BAR 50 lts. 80 lts. 100 lts. 150 lts. 200 lts. 200 lts. 300 lts. 300 lts. 500 lts. 500 lts.
5 BAR 50 lts. 100 lts. 100 lts. 150 lts. 200 lts. 200 lts. 300 lts. 300 lts. 500 lts. 500 lts.
6 BAR 80 lts. 100 lts. 150 lts. 150 lts. 200 lts. 300 lts. 500 lts. 500 lts. 500 lts. 700 lts.
7 BAR 80 lts. 100 lts. 150 lts. 200 lts. 300 lts. 300 lts. 500 lts. 500 lts. 500 lts. 700 lts.
8 BAR 80 lts. 100 lts. 150 lts. 200 lts. 300 lts. 300 lts. 500 lts. 500 lts. 700 lts. 700 lts.
- Los volmenes mnimos arriba reflejados se refieren a depsitos de membranas, para depsitos galvanizados multiplicar este volumen por 3 y aadir un
inyector por bomba.
- La mayora de los equipos con variador de frecuencia ya incluyen un pequeo depsito de 25-50-100 lts, por lo cual no es necesario preveer ningn otro
depsito.
B) Para mayores caudales, consultar el baco de seleccin de nuestro catlogo tcnico de equipos.
C) Solo para viviendas y segn la Normativa del Ministerio de Industria arriba citada, que establece que el volumen
total del Depsito (agua + aire) en litros ser igual o superior al que resulte de multiplicar los coeficientes de la
siguiente tabla por el nmero de suministros que alimenta el recipiente.
Acumuladores de membrana
Acumuladores galvanizados
N of Floors
1 2 3 4 5 6 7 8 9 10 11
w.c.m.
Start pressure 25 30 35 40 44 48 52 56 60 65 70
Stop pressure 40 45 50 55 59 63 67 71 75 80 85 Ha
A) In the selection tables, which indicate the membrane tank minimum volume required.
- The minimum volumes stated aboved are referred to membrane tanks, for galvanized tanks we should multiply by three and add and air inyector for
each pump.
- Some units with an inverter already includes a small tank from 25 to 100 lts, hence, no other tank is necessary to preview.
B) For larger flows, consult the selection chart of pressure tanks, that was at the technical Catalog.
C) Only for housing and according to the above mentioned Regulations of the Ministry of Industry, which establish
that the total volume of the tank (water + air) in litres will be the same or larger than that resulting from multipl-
ying the coefficients of Table 3 by the number of supplies feeding the recipient.
Membrane tanks
TYPE OF HOUSING
Coeficient
TYPE A
15
TYPE B
18
TYPE C
20
TYPE D
23
TYPE E
26
M
Galvanized tanks
EJEMPLO DE CLCULO
Ejemplo: tenemos un edificio de 70 viviendas tipo E en 4 plantas + 2 stanos, el grupo de presin debe ser de 3 bombas
(dos para servicio ms una en reserva) en el segundo stano y con una altura de aspiracin de 3,5 m.c.a.
Paso 1) El caudal necesario es: Q = para 70 viv. tipo E = 19,2 m3/h (segn tablas pag. 153)
La presin de servicio o de trabajo es: Pa = 4,1 bar (ejemplo pag. anterior).
Paso 2) Queremos un equipo de 3 bombas (2 bombas deben dar el caudal total + 1 de reserva)
Paso 3) Queremos escoger bombas de la Serie V.
Paso 4) Buscamos sobre las tablas de seleccin de bombas verticales tipo V-NOX V-VAT, equipo que con dos 2 bombas a
la vez nos den 19,2 m3/h a 4,1 bar y localizamos las bombas V-NOX 309, V-52 o bien V-43 o bien VAT-127 L8, y nos
quedamos con las V-52 (porque queremos turbinas y difusores en bronce).
Paso 5) La denominacin del equipo que necesitamos es:
- EP 3x V-52 (si es un equipo con cuadro convencional)
- VARIO EP 3x V-52 (si es un equipo con cuadro con variador de frecuencia) ya incluye pequeo acumulador
Paso 6) Escogemos el depsito de acumulacin necesario (en caso de escoger equipo con cuadro convencional)
- Mtodo 1: depsito mnimo de membrana de 300 lts. (galvanizado mnimo de 900 lts.+3 inyectores aire)
- Metodo 2: segn normativa (tablas pgina 154) depsito de membrana de 1.820 lts. (70 viv. x 26 lts.) o bien de-
psito. galvanizado de 5.600 lts. (70 viv. x 80 lts.) + 3 inyectores de aire.
Paso 7) Localizar en tarifa precio de equipos y acumuladores necesarios y en el momento de pasar pedido, rogamos indi-
quen tensin de trabajo.
Step 1) Select the point required in the installation, FLOW and PRESSURE: If you have these data, pass on to the second step, otherwise,
check with the technical information on Page 162-165 of this catalogue.
Step 2) Choose the number of pumps that will make up the pressure unit, depending on whether we want all the pumps active or we
want one or more in reserve (in which case they will not be counted in covering the total necessary flow, but they must be borne
in mind in the composition of the equipment).
Step 3) Choose the type of pump we want, depending on the constructive characteristics. We find three selection tables for this purpose:
Multicellular Vertical Pumps with impellers and diffusers in high strength technopolymer or brass series: V-NOX - V - VAT.
(page 168-169)
Multicellular Vertical Pumps with impellers and diffusers in stainless steel: VX (page 170-171)
Single impeller or twin impeller horizontal pumps: K - HK - MN. (page 172-173)
Step 4) Once we have all the necessary data, we locate the ideal kind of pump from the pump selection tables where we can see the
flow for 1 single pump, 2 pumps, 3 pumps and 4 pumps
Step 5) Then we pass to the following pages to find specific specifications on the unit we want, that is, 1, 2, 3 or 4 pumps (remembering
to bear in mind the pumps we want in reserve in this last point).
Step 6) Finally, we only need to choose the accumulator tank we need, which, as is explained in the technical information attached, we
can choose in a variety of manners:
Choose the minimum recommended by BOMBAS SACI depending on the flow and the pressure at which it must work, using
the table attached on the specification pages of each unit.
For larger flows or pressure, use the selection abacus on page 5 in the technical Caltalogue (B).
Choose the volume of the tank according to the Regulations of the Ministry of Industry presented on page 5 in the technical
Caltalogue (C).
181
Seleccin de Bombas Multicelulares
Serie SIGMA - V-NOX - XV-F
182
Seleccin de Bombas Multicelulares
Serie XV-F
APLICACIONES:
Los equipos de bombeo automticos descritos en el presente catalogo, son conjuntos diseados para ofrecer la
mejor solucin para el suministro de agua a presin en una instalacin de proteccin de incendios, por lo cual son
especialmente apropiados para muy diversas instalaciones como pueden ser: edificios pblicos y privados, grandes
superficies comerciales, almacenes, naves industriales ,etc... Nuestra lnea de equipos aqu reflejados han sido es-
tudiados para garantizar un funcionamiento fiable y duradero incluso en las condiciones mas extremas, condiciones
que en este tipo de aplicaciones son bastante comunes.
SACI PUMPS como punto de partida en el diseo de estos equipos ha tenido en cuenta una serie de premisas bsicas:
Cumplimiento estricto de la normativa vigente UNE 23-500-90, la reciente EN 12845 y las reglas tcnicas edi-
tadas por CEPREVEN.
Ofrecer una amplia gama de equipos, ya sea en tipo de ejecucin, varias bombas principales elctricas o die-
sel, normativas UNE, EN CEPREVEN y como no, en prestaciones de los mismos: hasta 288 m3/h de caudal
nominal y hasta 120 m.c.a. de altura manomtrica.
Diseo compacto, robusto y totalmente preparado, cableado para su puesta en marcha definitiva en destino
garantizando de esta forma una FCIL INSTALACIN y un MNIMO MANTENIMIENTO PREVENTIVO.
EJECUCIONES:
Podemos encontrar diferentes gamas de equipos contraincendios bien diferenciadas:
1) Equipos bajo normas UNE 23-500-90 que dividimos en 4 lneas en funcin de tipo y n de bombas principales que
incorporan:
U.E. Equipos que incorporan 1 bomba principal elctrica y 1 bomba jockey.
U.E.E. Equipos que incorporan 2 bombas principales elctricas y 1 bomba jockey.
U.D. Equipos que incorporan 1 bomba principal Diesel y 1 bomba jockey.
U.E.D. Equipos que incorporan 1 bomba principal elctrica, 1 bomba principal diesel y 1 bomba jockey.
2) Equipos bajo regla tcnica CEPREVEN RT2-ABA que dividimos en 4 lneas en funcin de tipo y n de bombas
principales que incorporan:
C.E. Equipos que incorporan 1 bomba principal elctrica y 1 bomba jockey.
C.E.E. Equipos que incorporan 2 bombas principales elctricas y 1 bomba jockey.
C.D. Equipos que incorporan 1 bomba principal Diesel y 1 bomba jockey.
C.E.D. Equipos que incorporan 1 bomba principal elctrica, 1 bomba principal diesel y 1 bomba jockey.
3) Equipos bajo normas EN 12845 (norma de reciente aplicacin y de mbito europeo) que dividimos en 4 lineas en
funcin de tipo y n de bombas principales que incorporan:
N.E. Equipos que incorporan 1 bomba principal elctrica y 1 bomba jockey.
N.E.E. Equipos que incorporan 2 bombas principales elctricas y 1 bomba jockey.
N.D. Equipos que incorporan 1 bomba principal Diesel y 1 bomba jockey.
N.E.D. Equipos que incorporan 1 bomba principal elctrica, 1 bomba principal diesel y 1 bomba jockey.
Bajo demanda podemos ofertar cualquier ejecucin no reflejada en el presente catlogo, otros equipos con normas
UNE 23-590-98 para rociadores, o bien equipos ECI, que son aquellos que estan construidos bajo unas especificacio-
nes internas, para aquellas instalaciones donde no se requiera una normativa especifica.
APLICATIONS:
The automatic pumping units described herein are designed to offer the best solution for pressurised water supply in
a fire fighting installation, and are therefore particularly suitable for highly diverse installations such as:
Public and private buildings, large commercial areas, Stores, Warehouses, etc.
Our line of units we reflect here has been studied to guarantee reliable, lasting working even in the most extreme
conditions, conditions where these kinds of applications are quite common.
In commencing the design of these units, BOMBAS SACI has borne in mind a series of basic premises:
Strict compliance with current UNE 23-500 regulations and all the technical rules published by CEPREVEN
normally demanded by insurance companies.
Offer a wide range of units either in execution, several electric or diesel main pumps, UNE or CEPREVEN stan-
dards, or in output: up to 288 m3/h nominal flow and up to 120 m.c.a manometric height.
Compact design, robust and totally prepared, wired for final commissioning at destination, thus guaranteeing
an EASY INSTALLATION and MINIMAL PREVENTIVE MAINTENANCE.
EXECUTIONS:
1) Units under UNE 23-500-90 standards, which we divide into 4 working lines depending on type and number of
main pumps they include:
U.E. Units incorporating 1 main electric pump and 1 jockey pump.
U.E.E. Units incorporating 2 main electric pumps and 1 jockey pump.
U.D. Units incorporating 1 main diesel pump and 1 jockey pump.
U.E.D. Units incorporating 1 main electric pump, 1 main diesel pump and 1 jockey pump.
2) Units under CEPREVEN RT2-ABA 96 standards, which we divide into 4 working lines depending on type and num-
ber of main pumps they include:
C.E. Units incorporating 1 main electric pump and 1 jockey pump.
C.E.E. Units incorporating 2 main electric pumps and 1 jockey pump.
C.D. Units incorporating 1 main diesel pump and 1 jockey pump.
C.E.D. Units incorporating 1 main electric pump, 1 main diesel pump and 1 jockey pump.
3) Units under EN 12845 standards, which we divide into 4 working lines depending on type and number of main
pumps they include:
N.E. Units incorporating 1 main electric pump and 1 jockey pump.
N.E.E. Units incorporating 2 main electric pumps and 1 jockey pump.
N.D. Units incorporating 1 main diesel pump and 1 jockey pump.
N.E.D. Units incorporating 1 main electric pump, 1 main diesel pump and 1 jockey pump.
On demand we can offer any kind of execution not reflected in this catalogue, other units with UNE 23-590-98
standards (Sprinklers, very close to the CEPREVEN), or ECI units, which are those built in accordance with internal
specifications for installations not requiring specific regulations.
M
All the units reflected in the tables are prepared for working with loading suction, otherwise specify on the order.
La bomba Jockey es la encargada de mantener la red presurizada, compensando las posibles fugas de la instalacin.
En caso de iniciarse un incendio y comenzar a abrirse puntos de consumo, la presin va disminuyendo hasta el punto
en que se pone en marcha la bomba de caudal o principal.
En cuanto a la bomba pricipal, ademas de cumplir con el punto nominal de trabajo, debe cumplir las siguientes es-
pecificaciones:
- A caudal cero, la presin no ser superior al 130% de la presin nominal.
- A caudal 140% del nominal, la presin no ser inferior al 70% de la presin nominal.
- El motor debe dimensionarse para cumplir el punto del 140% del caudal nominal.
LAS BOMBAS PRINCIPALES SEGN NORMATIVA DEBEN ARRANCAR AUTOMTICAMENTE, PERO EL PARO
DE LAS MISMAS DEBE SER OBLIGATORIAMENTE MANUAL.
CARACTERSTICAS CONSTRUCTIVAS:
TODOS LOS EQUIPOS REFLEJADOS EN LAS TABLAS VIENEN PREPARADOS PARA TRABAJAR CON ASPIRACIN
EN CARGA, EN CASO CONTRARIO, ESPECIFICAR EN LA SOLICITUD DE PEDIDO.
MAIN PUMPS:
The main pump supplies the flow and pressure required by the system. It must be capable of driving at least 140% of the
nominal flow at a pressure not below 70% of the nominal pressure. The motors of the main pumps must be sized for the
maximum absorbed power of the pump at the overload point plus a safety margin.
Main pumps could be with electric motor or with diesel engine:
THE MAIN PUMPS, ACCORDING TO REGULATIONS, MUST START AUTOMATICALLY, BUT WILL NECESSARILY BE
STOPPED MANUALLY.
OTHER COMPONENTS:
Comprising a methacryllate measurer with direct reading and DN 40 DN 50 DN 65 DN 80 DN 100 DN 150 DN 200
scale in l/min. and a small AISI 316 float + a section of side-flan- MIN. FLOW 5 9 15 18 30 54 108
ged pipe with minimum dimensions of 10 DN before the measu-
MAX. FLOW 23 33 54 69 120 234 432
rer and 5 DN following it. Exclusively for use with HORIZONTAL
piping.
U.E. / 405
U.E. / 406
4
4
1,3
1,3
46
34
56
U.E.
42
U.E. / 15 - 7 7,5 4 87
75
U.E. / 425 B 15 3 70 67
65 56
U.E. / 425 A 20 4 87 84
82 76
U.E. / 520 A 20 2 56 55 53
52 50 46
U.E. / 525 C 20 3 69 68 66
63 62 58
U.E. / 525 B 25 3 76 75 73
71 69 65
U.E. / 525 A 30 4 88 86 85
83 81 77
U.E. / 652 B 25 2 50 49 47 46
47 44 42 38
U.E. / 652 A 30 2 57 56 55 53
55 52 50 47
U.E.E. / 405
U.E.E. / 406
4
4
4
4
1,3
1,3
46
34
56
U.E.E.
42
U.E.E. / 425 B 15 15 3 70 67
65 56
U.E.E. / 425 A 20 20 4 87 84
82 76
U.E.E. / 520 A 20 20 2 56 55 53
52 50 46
U.E.E. / 525 C 20 20 3 69 68 66
63 62 58
U.E.E. / 525 B 25 25 3 76 75 73
71 69 65
U.E.E. / 525 A 30 30 4 88 86 85
83 81 77
U.E.E. / 652 B 25 25 2 50 49 47 46
47 44 42 38
U.E.E. / 652 A 30 30 2 57 56 55 53
55 52 50 47
40 40 2 59 57 55
U.E.E. / 652 S21-40
U.D. / 405
U.D. / 406
7,6
7,6
1,3
1,3
46
34
56
U.D.
42
U.D. / 15 - 7 24 4 87
75
U.D. / 425 A 24 4 87 84
82 76
U.D. / 525 C 24 3 69 68 66
63 62 58
U.D. / 525 B 24 3 76 75 73
71 69 65
U.D. / 525 A 24 4 88 86 85
83 81 77
U.D. / 652 B 24 2 50 49 47
47 44 42
U.D. / 652 A 24 2 57 56 55
55 52 50
U.E.D. / 405
U.E.D. / 406
4
4
7,6
7,6
1,3
1,3
46
34
56
U.E.D.
42
U.E.D. / 15 - 7 7,5 24 4 87
75
U.E.D. / 425 A 20 24 4 87 84
82 76
U.E.D. / 525 C 20 24 3 69 68 66
63 62 58
U.E.D. / 525 B 25 24 3 76 75 73
71 69 65
U.E.D. / 525 A 30 24 4 88 86 85
83 81 77
U.E.D. / 652 B 25 24 2 50 49 47
47 44 42
U.E.D. / 652 A 30 24 2 57 56 55
55 52 50
40 39 2 59 57 55
U.E.D. / 652 S21-40
CEPREVEN RT2-ABA
POTENCIA HP CAUDAL NOMINAL m3/h / Nominal Flow m3/h
Caudal de sobrecarga m3/h / Overload flow m3/h
TIPO EQUIPO 12 18 24 30 36 42 48 60 72 84 96 108
SET TYPE PRAL. 17 25 34 42 50 59 67 84 101 118 134 151
JOCKEY
ELEC. ALTURA NOMINAL m.c.a. / Nominal Height w.c.m.
Altura de sobrecarga m.c.a. / Overload height w.c.m.
C.E. / 320 S 20 / 10 10 2 50
49
48
44
45
38
42
30 C.E.
C.E. / 320 S 22 / 15 15 3 63 62 59 57 53
62 58 54 47 37
C.E. / 425 S 24 / 20 20 3 76 75
72 68
C.E. / 425 S 25 / 25 25 3 82 81
81 80
C.E. / 420 S 22 / 20 20 3 59 57 55
54 50 45
C.E. / 425 S 23 / 25 25 3 66 64 61
60 55 51
C.E. / 425 S 25 / 30 30 3 80 78 76
74 69 66
C.E. / 425 S 26 / 30 30 4 90 89 87 84
87 83 78 74
C.E. / 525 S 22 / 30 30 3 60 55
50 40
C.E. / 525 S 23 / 30 30 3 67 62
56 48
C.E. / 525 S 24 / 40 40 3 74 70
65 55
C.E. / 525 S 25 / 40 40 3 82 78
72 63
C.E. / 525 S 26 / 40 40 4 94 93 90 88
90 88 82 71
C.E. / 652 S 20 / 30 30 3 53 51 49
48 42 35
C.E. / 652 S 21 / 40 40 3 59 57 55
55 50 43
C.E. / 652 S 22 / 40 40 3 66 64 62
62 58 53
C.E. / 625 S 24 / 50 50 3 71 70 66
64 60 50
C.E. / 625 S 25 / 50 50 3 80 78 73
71 67 60
C.E. / 625 S 26 / 60 60 4 92 91 89 87
87 82 80 73
CEPREVEN RT2-ABA
POTENCIA HP CAUDAL NOMINAL m3/h / Nominal Flow m3/h
Caudal de sobrecarga m3/h / Overload flow m3/h
TIPO EQUIPO PRAL. PRAL. 12 18 24 30 36 42 48 60 72 84 96 108
SET TYPE 17 25 34 42 50 59 67 84 101 118 134 151
ELEC. ELEC. JOCKEY
ALTURA NOMINAL m.c.a. / Nominal Height w.c.m.
1 2 Altura de sobrecarga m.c.a. / Overload height w.c.m.
C.E.E. / 320 S 20 / 10 10 10 2 50
49
48
44
45
38
42
30 C.E.E.
C.E.E. / 320 S 22 / 15 15 15 3 63 62 59 57 53
62 58 54 47 37
76 75
C.E.E. / 425 S 24 / 20 20 20 3 72 68
82 81
C.E.E. / 425 S 25 / 25 25 25 3 81 80
59 57 55
C.E.E. / 420 S 22 / 20 20 20 3 54 50 45
66 64 61
C.E.E. / 425 S 23 / 25 25 25 3 60 55 51
80 78 76
C.E.E. / 425 S 25 / 30 30 30 3 74 69 66
90 89 87 84
C.E.E. / 425 S 26 / 30 30 30 4 87 83 78 74
60 55
C.E.E. / 525 S 22 / 30 30 30 3 50 40
67 62
C.E.E. / 525 S 23 / 30 30 30 3 56 48
74 70
C.E.E. / 525 S 24 / 40 40 40 3 65 55
82 78
C.E.E. / 525 S 25 / 40 40 40 3 72 63
94 93 90 88
C.E.E. / 525 S 26 / 40 40 40 4 90 88 82 71
53 51 49
C.E.E. / 652 S 20 / 30 30 30 3 48 42 35
59 57 55
C.E.E. / 652 S 21 / 40 40 40 3 55 50 43
66 64 62
C.E.E. / 652 S 22 / 40 40 40 3 62 58 53
71 70 66
C.E.E. / 625 S 24 / 50 50 50 3 64 60 50
80 78 73
C.E.E. / 625 S 25 / 50 50 50 3 71 67 60
92 91 89 87
C.E.E. / 625 S 26 / 60 60 60 4 87 82 80 73
M
CEPREVEN RT2-ABA
POTENCIA HP CAUDAL NOMINAL m3/h / Nominal Flow m3/h
Caudal de sobrecarga m3/h / Overload flow m3/h
TIPO EQUIPO 12 18 24 30 36 42 48 60 72 84 96 108
SET TYPE PRAL. 17 25 34 42 50 59 67 84 101 118 134 151
JOCKEY
DIESEL ALTURA NOMINAL m.c.a. / Nominal Height w.c.m.
Altura de sobrecarga m.c.a. / Overload height w.c.m.
C.D. / 525 S 24 / 40 44 3 74 70
65 55
C.D. / 525 S 25 / 40 44 3 82 78
72 63
C.D. / 525 S 26 / 40 44 4 94 93 90 88
90 88 82 71
C.D. / 652 S 20 / 30 44 3 53 51 49
48 42 35
C.D. / 652 S 21 / 40 44 3 59 57 55
55 50 43
C.D. / 652 S 22 / 40 44 3 66 64 62
62 58 53
C.D. / 625 S 24 / 50 65 3 71 70 66
64 60 50
C.D. / 625 S 25 / 50 65 3 80 78 73
71 67 60
C.D. / 625 S 26 / 60 65 4 92 91 89 87
87 82 80 73
CEPREVEN RT2-ABA
POTENCIA HP CAUDAL NOMINAL m3/h / Nominal Flow m3/h
Caudal de sobrecarga m3/h / Overload flow m3/h
TIPO EQUIPO 12 18 24 30 36 42 48 60 72 84 96 108
SET TYPE PRAL. PRAL. 17 25 34 42 50 59 67 84 101 118 134 151
JOCKEY
ELEC. DIESEL ALTURA NOMINAL m.c.a. / Nominal Height w.c.m.
Altura de sobrecarga m.c.a. / Overload height w.c.m.
C.E.D. / 525 S 24 / 40 40 44 3 74 70
65 55
C.E.D. / 525 S 25 / 40 40 44 3 82 78
72 63
C.E.D. / 525 S 26 / 40 40 44 4 94 93 90 88
90 88 82 71
C.E.D. / 652 S 20 / 30 30 44 3 53 51 49
48 42 35
C.E.D. / 652 S 21 / 40 40 44 3 59 57 55
55 50 43
C.E.D. / 652 S 22 / 40 40 44 3 66 64 62
62 58 53
C.E.D. / 625 S 24 / 50 50 65 3 71 70 66
64 60 50
C.E.D. / 625 S 25 / 50 50 65 3 80 78 73
71 67 60
60 65 4 92 91 89 87
C.E.D. / 625 S 26 / 60
87 82 80 73
M
Tensiones:
230 V monofsico (hasta 3 CV), 230 V trifsico (hasta 20 CV), 400 V trifsico, voltajes especiales (50-60 Hz)
Caractersticas generales:
Armario Polister 1 y 2 bombas en potencias inferiores a 7,5 cv.
Metlico en todo el resto de gama
Interruptor general En todos los equipos de 1 y 2 bombas con potencias superiores a 7,5 cv.
De serie en equipos de 3 y 4 bombas
Indicadores Piloto verde de bomba en marcha. Piloto rojo de disparo por sobrecarga
Piloto rojo intermitente de alarma de sobrenivel (slo para fecales)
Mando Selector de 3 posiciones MANUAL - PARO - AUTOMTICO por bomba
Protecciones Guardamotor para bombas hasta 15 cv (disyuntor magnetotrmico)
Fusibles y rels trmicos para potencias superiores
Accionamiento Arranque directo con un contactor para bombas inferiores a 7,5 cv.
Arranque estrella tringulo para potencias superiores a 5,5 cv.
Alternancia 2 bombas - Alternancia de las dos.
3 bombas - Alternancia de la 1 - 3.
4 bombas - Alternancia de la 1 - 3 y 2 - 4
Maniobra 230 Voltios
Alarma En los equipos para aguas fecales salida de tensin para claxon
externo de alarma de nivel.
Opciones:
Maniobra 24 voltios En todos los equipos de presin y aguas fecales.
Alternancia 3-4 bombas Alternancia de todas
Armario metlico En los equipos de 1 y 2 bombas inferiores a 7,5 cv
Interruptor general En los equipos de 1 y 2 bombas inferiores a 7,5 cv.
Interruptor horario En los equipos de presin para accionar electrovlvula.
Maniobra En equipos de aguas fecales, boyas independientes de paro para cada bomba
Funcionamiento:
Cuadros para equipos de presin:
Materiales perifricos: Presostatos de trabajo y boya de paro nivel (o presostato inversado en bombeos desde la red general).
En manual funciona de forma continuada (sin atender a la presin de impulsin) y solo se para por la boya de paro o por disparo
trmico.
En automtico conserva las mismas condiciones que en manual, pero el funcionamiento est condicionado a los presostatos
de trabajo; estos deben estar regulados en cascada. En equipos de ms de una bomba, se alterna el arranque de las bombas.
Cuadros para bombas de aguas fecales:
Material perifrico: Boyas de marcha, paro, sobrenivel y claxon exterior de alarma sobrenivel.
En manual el funcionamiento es continuado y solo se para por la boya de paro o por sobrecarga de la bomba.
En automtico conserva las mismas condiciones que en manual, pero la orden de marcha se efecta por las boyas. En equipos
de ms de una bomba, se alterna el arranque de las bombas. La boya de alarma nivel acciona un claxon exterior, (bajo demanda
se puede instalar en el propio cuadro). La boya de nivel mnimo es para todas las bombas, (bajo demanda se pueden colocar
boyas de paro independientes para cada bomba).
CUADROS ELECTRICOS PARA EQUIPOS DE PRESION Y BOMBAS DE AGUAS FECALES CON ARRANCADOR PROGRESIVO
Tensiones:
400 V trifsico, voltajes especiales (50-60 Hz). Todos los cuadros para todas las potencias.
Caractersticas generales:
Armario Metlico para todas las potencias
Interruptor general De serie en todos los cuadros
Indicadores Piloto verde de bomba en marcha. Piloto rojo de disparo por sobrecarga
Piloto amarillo de alarma sobrenivel (slo para fecales)
Mando Selector de 3 posiciones MANUAL - PARO - AUTOMTICO por bomba
Protecciones Guardamotor para bombas hasta 15 cv (disyuntor magnetotrmico)
Fusibles y rels trmicos para potencias superiores
Accionamiento Arranque directo (3 hilos) por arrancador suave
Arranque a 6 hilos por arrancador suave (bajo demanda)
Alternancia 2 bombas - Alternancia de las dos.
3 bombas - Alternancia de la 1 - 3.
4 bombas - Alternancia de la 1 - 3 y 2 - 4
Maniobra 230 Voltios y protegida con fusibles
Alarma Los cuadros para bombas de aguas fcales disponen de una salida de tensin
(230Vac) para uun claxon externo de alarma de nivel
Conexionado Bornero marcado y en posicin elevada e inclinada para una fcil conexin
de los elementos
Opciones:
Maniobra 24 voltios En todos los equipos
Alternancia 3 bombas Alternancia de todas
Interruptor horario En los equipos de presin para accionar electrovlvula.
Maniobra Cualquier tipo de maniobra especial
Sondas Sondas pozo o depsito o, sondas pozo y depsito para equipos de presin
Funcionamiento:
Cuadros para equipos de presin:
Materiales perifricos: Presostatos de trabajo y boya de paro nivel o sondas (si se han solicitado).
En manual funciona de forma continuada (sin atender a la presin de impulsin) y solo se para por la boya de paro o por disparo
trmico.
En automtico conserva las mismas condiciones que en manual, pero el funcionamiento est condicionado a los presostatos
de trabajo; estos deben estar regulados en cascada. En equipos de ms de una bomba, se alterna el arranque de las bombas.
Cuadros para bombas de aguas fecales:
M
Material perifrico: Boyas de marcha, paro, sobrenivel y claxon exterior de alarma sobrenivel.
En manual el funcionamiento es continuado y solo se para por la boya de paro o por sobrecarga de la bomba.
En automtico conserva las mismas condiciones que en manual, pero la orden de marcha se efecta por las boyas. En equipos
de ms de una bomba, se alterna el arranque de las bombas. La boya de alarma nivel acciona un claxon exterior, (bajo demanda
se puede instalar en el propio cuadro).
Tensiones:
400 V trifsico, voltajes especiales (50-60 Hz)
Caractersticas generales:
Tipo de equipo Bsico: 1 bomba regulada + auxiliares
Alternado: rotacin de la bomba regulada (bajo demanda)
Armario Metlico con ventilacin forzada
Int. general En todas las unidades
Indicadores Piloto verde de bomba en marcha. Piloto rojo de disparo por sobrecarga
Piloto amarillo de alarma nivel
Selectores de marcha Selector de 3 posiciones presostatos - 0 - variador
Protecciones variador Fusibles rpidos tipo GG/GL
Protecciones bombas aux. Guardamotor para bombas hasta 15 cv (disyuntor magnetotrmico)
Fusibles y rels trmicos para potencias superiores
Accionamiento Arranque directo con un contactor para bombas inferiores a 7,5 cv.
Arranque estrella - triangulo para potencias superiores a 5,5 cv.
Alternancia Bsico: 1 bomba regulada + rotacin de todas las auxiliares
Alternado: rotacin de la bomba regulada (bajo demanda) Rotacin total.
Emergencia Funcin de emergencia por presostatos de bombas auxiliares
en caso de avera del variador
Material auxiliar Transductor de presin 0-10 / 0-16 bar 4-20 mA
Opciones:
Indicadores Voltmetro general / Ampermetro por bomba / Cuenta horas
Accionamiento Arrancadores suaves en las bombas auxiliares
Protecciones Diferenciales de alta inmunidad contra disparos intespestivos
Consignas exteriores Posibilidad de trabajar con varias consignas de presin
fijas o variables indicadas por fuentes ext.
Seales externas Analgicas: presin, consumo bomba regulada, velocidad, etc.
Digitales: averia bomba, marcha, etc.
Aplicaciones Bombas sumergidas / Bombeos de aguas fecales
Armarios Poliester IP-65 (para exteriores)
Funcionamiento:
Equipos destinados a grupos de presin donde se requiera una presin constante.
Con el sistema de regulacin de velocidad el equipo adapta el rendimiento de las bombas al consumo de agua que
hay en cada momento.
Principales ventajas:
Evitamos los constantes arranques y paros de los sistemas convencionales alargando la vida mecnica del equipo.
Evitamos los golpes de ariete en la instalacin gracias a la progresividad de equipo.
Evitamos tener que instalar grandes acumuladores de membrana o galvanizados.
La potencia absorbida de la red se adapta al mximo al consumo de agua, minimizando los costes, adems la utili-
zada por el variador es casi totalmente activa.
198
Cuadros Elctricos para Equipos Contraincendios
Serie CUADROS ELCTRICOS
CUADRO DE ARRANQUE Y CONTROL PARA BOMBAS ELCTRICAS Y DIESEL SEGN UNE 23-500-90.
Construido estrictamente bajo la norma UNE 23-500-90. Incorpora panel frontal de policarbonato para fcil comprensin
de toda la simbologa, dentro del mismo armario encontraremos el arranque, control y proteccin de la bomba auxiliar o
jockey.
Los cuadros estn compuestos por armario metlico IP55 color gris Ral 7032, interruptor seccionador general, arranca-
dores para las bombas, selectores tres posiciones para bomba principal y jockey. Pulsadores de prueba de lmparas y
alarmas acsticas. Pulsador de paro de bomba principal. Proteccin trmica para bomba jockey, voltmetro, ampermetro,
contador de arranques jockey, sirena de alarma, batera de soporte. Igualmente, el cuadro de control de bomba diesel,
aade sus particularidades, como tacmetro, relojes de temperatura y presin de aceite. En definitiva nuestros cuadros
para este tipo de contraincendios incorporan todas las exigencias reflejadas en la normativa UNE 23-500-90.
CUADRO DE ARRANQUE Y CONTROL PARA BOMBAS ELCTRICAS Y DIESEL SEGN CEPREVEN RT2 - ABA.
Construido estrictamente bajo las reglas tcnicas CEPREVEN. Incorpora panel frontal de policarbonato para fcil
comprensin de toda la simbologa.
Los cuadros estn compuestos por armario metlico IP55 color rojo Ral 3000, interruptor seccionador general, arran-
cadores para las bombas, selectores tres posiciones para bomba principal y jockey. Pulsadores de prueba de lm-
paras y alarmas acsticas. Pulsador de paro de bomba principal. Proteccin trmica para bomba jockey, voltmetro,
ampermetro, contador de arranques jockey, sirena de alarma, batera de soporte. Igualmente, el cuadro de control
de bomba diesel, aade sus particularidades, como 2 cargadores de bateras, prueba de 6 intentos de arranque,
pulsador de marcha por batera, ampermetro por batera, tacmetro, relojes de temperatura y presin de aceite. En
definitiva nuestros cuadros para este tipo de contraincendios incorporan todas las exigencias reflejadas en la regla
tcnica CEPREVEN RT2 - ABA.
PARA INFORMACION MAS DETALLADA ROGAMOS CONSULTEN NESTRO CATALOGO TECNICO SACI
PUMPS CONTROLS.
199
Cuadros Elctricos Bombas de Piscina y Bombas Sumergible
Serie CUADROS ELCTRICOS
Funcionamiento:
Equipos destinados a la filtracin de piscinas con una sola bomba monofsicas hasta 3 cv y trifsicas hasta 5,5 cv. La orden de
filtracin puede ser manual o automtica a trabes del reloj programador. Pueden incorporar 1, 2 o 3 transformadores de 230/12
voltios para focos de 300 watios. El encendido de estos es manual, pero bajo demanda se pueden incorporar sistemas con
mando a distancia, o programadores automticos.
Funcionamiento:
Equipos destinados al control de bombas sumergidas monofsicas hasta 3 cv, trifsicas y voltajes especiales (50-60
Hz). Incorpora un selector de tres posiciones MAN - PARO - AUTOMTICO. En posicin manual el funcionamiento
es continuado y la bomba solo est protegida de sobrecargas, en automtico la orden de marcha puede ser exterior
(presostato) o por el controlador de nivel.
200
Datos tcnicos
201
Esquema de Conexiones de Motores Elctricos
Serie ESQUEMA DE CONEXIONES
MONOFSICO
TRIFSICO
Tensin Tensin
menor mayor
202
Datos Tcnicos Bombas Sumergibles
Serie DATOS TCNICOS
TABLA DE POTENCIAS
PARA GENERADORES
HP KW KW KWA
0,5 0,37 1,5 2
0,75 0,55 2 2,5
1 0,75 2,5 3
1,5 1,1 3,5 4,5
Negro (fase comn) L1
2 1,5 4 5
Azul o Gris (fase principal)
3 2,2 6 7,5 N
Marrn (fase arranque) Condensador
4 3 9 11
5,5 4 10 12,5 Amarillo/verde
Tierra
7,5 5,5 12,5 15,6
10 7,5 15 18
12,5 9,2 18,8 23,5
15 11 22,5 28 Para cerrar con estanqueidad la conexin de la
20 15 30 38 prolongacin del cable, tngase en cuenta el
25 18,5 40 50 EMPALME RETRCTIL.
30 22 45 57
40 30 60 75
50 37 75 94
60
70
45
51
90
105
112
131
N
100 75 150 190
125 92 185 230
150 110 210 260
203
Datos tcnicos Seccin de Cable
Serie DATOS TCNICOS
Arranque Estrella-Tringulo
205
Tablas de Prdidas de Carga por Rozamiento en las Turbinas
Serie TABLAS DE PRDIAS DE CARGA
Pc % = Prdida de carga = metros verticales por cada 100 metros de tuberia horizontal Vm/s= velocidad del fluido
Dimetro interior
Longitud de laentuberia
cable metrosen mm
Caudal
m3/h 25
25 32
32 40
40 50
50 60
60 70
70 80
80 90
90 100
100 125
125 150
150 175
175 200
200 225
225 250
250 275
275 300
300 350
350 400
400 450
450 500
500 600
600 700
700
Pc % 17 6 1,6 0,54 0,25 0,13 0,06 0,03 0,02
3 Vm/s 1,7 1,03 0,67 0,43 0,29 0,22 0,16 0,13 0,1
Pc % 24 6 2 0,9 0,43 0,21 0,13 0,08 0,026
6 Vm/s 2,06 1,34 0,85 0,58 0,44 0,32 0,26 0,2 0,13 Las PRDIDAS DE CARGA producidas por los accesorios se
Pc % 12,5 4,3 1,8 0,9 0,46 0,25 0,15 0,06 calculan considerndolos como equivalentes a las siguientes
9 Vm/s 2,08 1,32 0,89 0,65 0,5 0,39 0,32 0,2 longitudes de tubera:
Pc % 20 7 3,2 1,5 0,75 0,44 0,25 0,09 0,03 VLVULAS DE PIE: Como 15 m. de tubera
12 Vm/s 2,76 1,76 1,19 0,88 0,67 0,53 0,43 0,27 0,18 VLVULAS DE RETENCIN: Como 10 m. de tubera
Pc % 12 5,2 2,4 1,25 0,7 0,42 0,15 0,06 VLVULAS DE COMPUERTA: Como 5 m. de tubera
15 Vm/s 2,2 1,49 1,1 0,87 0,66 0,54 0,34 0,24
Pc % 17 7 3,5 1,7 1 0,6 0,2 0,08
18 Vm/s 2,64 1,78 1,3 1 0,78 0,64 0,4 0,28
Pc % 22 8,8 4,2 2,2 1,3 0,75 0,26 0,1 0,05
21 Vm/s 3,35 2,08 1,54 1,17 0,93 0,75 0,48 0,32 0,24
Pc % 12 5,7 3 1,7 1 0,36 0,14 0,07
24 Vm/s 2,38 1,76 1,34 1,06 0,86 0,54 0,36 0,28
Pc % 14 7 3,5 2 1,25 0,42 0,17 0,08
27 Vm/s 2,7 1,97 1,45 1,17 0,96 0,6 0,42 0,31
Pc % 17 8,2 4,2 2,5 1,5 0,5 0,2 0,09
30 Vm/s 2,98 2,2 1,74 1,32 1,08 0,68 0,48 0,34
Pc % 25 12 6,3 3,5 2 0,75 0,3 0,14 0,07
36 Vm/s 3,58 2,63 2 1,58 1,28 0,82 0,57 0,42 0,32
Pc % 16 8,5 4,5 2,7 0,85 0,33 0,18 0,08
42 Vm/s 3,07 2,34 1,85 1,5 0,96 0,66 0,48 0,37
Pc % 21 10 6 3,6 1,2 0,45 0,22 0,12 0,06
48 Vm/s 3,51 2,68 2,12 1,72 1,08 0,72 0,56 0,43 0,34
Pc % 25 13,5 7,6 4,5 1,5 0,55 0,28 0,14 0,08
54 Vm/s 3,94 3 2,34 1,92 1,2 0,84 0,63 0,48 0,38
Pc % 16 9 5,5 1,8 0,7 0,33 0,17 0,1
60 Vm/s 3,32 2,64 2,16 1,36 0,96 0,68 0,53 0,42
Pc % 24 14 8 2,76 1 0,49 0,24 0,14 0,08
75 Vm/s 4,17 3,31 2,68 1,72 1,18 0,87 0,67 0,53 0,43
Pc % 20 12,5 3,8 1,45 0,74 0,36 0,2 0,14 0,08
90 Vm/s 3,97 3,24 2,04 1,44 1,02 0,8 0,63 0,51 0,42
Pc % 26 16,5 5,3 1,95 0,9 0,47 0,27 0,16 0,1
105 Vm/s 4,6 3,74 2,41 1,66 1,22 0,93 0,74 0,59 0,49
Pc % 21,5 6,9 2,6 1,2 0,61 0,36 0,2 0,14 0,08
120 Vm/s 4,31 2,72 1,93 1,35 1,06 0,84 0,68 0,56 0,47
Pc % 26 9 3,3 1,5 0,76 0,45 0,25 0,17 0,1
135 Vm/s 4,81 1,07 2,13 1,56 1,19 0,95 0,76 0,63 0,53
Pc % 11 4 1,9 0,95 0,55 0,3 0,21 0,12 0,06
150 Vm/s 3,44 2,36 1,74 1,34 1,05 0,086 0,07 0,59 0,43
Pc % 13 4,7 2,2 1,13 0,65 0,37 0,24 0,15 0,08
165 Vm/s 3,75 2,61 1,91 1,46 1,15 0,94 0,77 0,65 0,48
Pc % 15,2 5,5 2,6 1,3 0,76 0,43 0,29 0,18 0,09
180 Vm/s 4,09 2,83 2,08 1,59 1,26 1,02 0,84 0,71 0,52
Pc % 21 7,4 3,5 1,8 1,1 0,6 0,37 0,24 0,12 0,06
210 Vm/s 4,7 3,32 2,43 1,86 1,49 1,19 0,98 0,82 0,61 0,47
Pc % 9,4 4,3 2,3 1,3 0,75 0,48 0,3 0,15 0,08
240 Vm/s 3,78 2,77 2,12 1,68 1,36 1,12 0,95 0,69 0,53
Pc % 12 5,5 2,8 1,62 0,9 0,58 0,35 0,18 0,09
270 Vm/s 4,26 3,13 2,39 1,9 1,53 1,26 1,07 0,78 0,59
Pc % 14 7,5 3,4 2 1,1 0,74 0,46 0,22 0,11 0,07
300 Vm/s 4,75 3,47 2,66 2,1 1,71 1,4 1,18 0,86 0,67 0,53
Pc % 9 4,7 2,8 1,6 1 0,65 0,32 0,16 0,09 0,05
360 Vm/s 4,15 3,17 2,53 2,04 1,68 1,41 1,04 0,79 0,63 0,51
Pc % 11,6 6,2 3,5 2 1,3 0,82 0,41 0,21 0,12 0,07 0,03
420 Vm/s Para tuberas que no sean de hierro fundido recomendamos mul-
4,86 3,72 2,94 2,37 1,96 1,64 1,22 0,94 0,76 0,59 0,41
tiplicar los valores de las Perdidas de Carga obtenidos en la tabla
Pc % por los siguientes coeficientes: 8,5 4,9 2,9 1,9 1,2 0,6 0,3 0,17 0,09 0,04
480 Vm/s 4,24 3,36 2,72 2,24 1,9 1,38 1,06 0,84 0,69 0,47
TUBERAS HIERRO FORJADO: 0,76
Pc % TUBERAS ACERO SIN SOLDADURA: 0,80 11 6,5 3,7 2,35 1,52 0,75 0,38 0,22 0,12 0,05
540 Vm/s TUBERAS DE FIBRO-CEMENTO: 0,80 4,78 3,8 3,06 2,52 2,13 1,56 1,19 0,94 0,76 0,53
Pc % TUBERAS DE CEMENTO: 0,80 12,2 7,4 4,3 2,7 1,7 0,9 0,45 0,25 0,13 0,05 0,02
600 Vm/s TUBERAS DE GRES: 1,17 5,3 4,2 3,4 2,81 2,36 1,73 1,34 1,06 0,86 0,61 0,44
Pc % TUBERAS FORJADAS MUY USADAS: 2,10 9 5,2 3,3 2,1 1,1 0,54 0,3 0,16 0,06 0,03
660 Vm/s TUBERAS HIERRO PAREDES RUGOSAS: 3,60 4,61 3,76 3,07 2,59 1,89 1,46 0,15 0,93 0,65 0,48
Pc % 10 6 3,8 2,5 1,3 0,62 0,35 0,19 0,07 0,03
720 Vm/s 5,05 4,08 3,37 2,84 2,08 1,65 1,26 1,02 0,71 0,52
Pc % 7,3 4,5 3 1,5 0,75 0,42 0,23 0,08 0,04
780 Dimetro tubera impulsin recomendable (mm)
Vm/s 4,43 3,65 3,08 2,26 1,73 1,36 1,11 0,77 0,56
Pc % 8 5,4 3,4 1,7 0,85 0,48 0,26 0,1 0,04
840 Dimetro tubera aspiracin recomendable (mm)V
Vm/s 4,76 3,95 3,31 2,43 1,86 1,47 1,19 0,83 0,61
Pc % 9 5,8 3,75 1,9 0,96 0,53 0,29 0,11 0,05
900 Vm/s 5,1 4,22 3,54 2,6 2 1,57 1,27 0,88 0,65
206
Desde 1975 en continua
evolucin aportando
las mejores soluciones
tecnolgicas para nuestros Descubre nuestras
clientes novedades
Discover
Since 1975 in continuous our news
development in order to
give the best technological
solutions to our clients
Catlogo general
Can Cabanyes, 50-58 Pol. Ind. Pocomaco
Pol. Ind. Circuit de Catalunya Parcela D-31
08403 GRANOLLERS 15190 A CORUA
General catalogue
Barcelona Spain Spain
Cat. CG
sacipumps.com Rev. 01-12-2016 sacipumps.com