Escolar Documentos
Profissional Documentos
Cultura Documentos
1. OVERVIEW
As the signal generating unit of the ultrasonic cold water meter, the Ultrasonic Cold
Water Meter Body is used for supplying accurate, stable and continuous ultrasonic signals
to the meter circuit.
The Ultrasonic Cold Water Meter Body is designed for residential use and conforms
to the Urban Construction Industry Standard CJT434-2013 of The PRC, taking into
account the water metering needs of different regions. The built-in transducers feature
high sensitivity, stable performance, high reliability and low power consumption.
3. TECHNICAL DATA
1)Product Name:: HZ0016-000
2)Model No.: RC20/HZ-US0004-000-01
3). Electrical characteristics of the built-in sensors::
Test condition
Item Unit Standard
T=25
4) Technical Parameter
Test condition
Item Unit Standard
T=25
1Vp-p / 20 Pulse, Interval
20ms at 1MHz
Received Signal Amplitude mV 350
1Vp-p / 20 Pulses Interval
20ms at 1MHz
A1/20151207 Remark: This specification is subject to change without prior notice 1/10
Maximum Input Voltage Vp-p 5 At 1MHz
A1/20151207 Remark: This specification is subject to change without prior notice 2/10
2Commanded PCB dimension
3Exploded Drawing
Component 113
A1/20151207 Remark: This specification is subject to change without prior notice 3/10
6). Main Component and Name
7). Note:
1. Storage Condition:-25 C+55 C
2.Please take Anti interference into consideration when designing driving circuit
3.Driving voltage is suggested to be lower than 5Vp-p
4. Maximum pressure endurance is 1.6MPa
ECR
Revsion Version of The number of
Contents of revision
time revision ECR
2015/12/07 / /
/ /
Accomplished by/Date Approved by/Date
A1/20151207 Remark: This specification is subject to change without prior notice 4/10