Escolar Documentos
Profissional Documentos
Cultura Documentos
Hand Control
Holder
Fig.2
Hand Controller
DC 12V
Auto Guide
Fig.1
Motor Controller
holder Motor Controller
SETTING UP
1) Locate the hand control holder. Slide the holder
onto the accessory tray as shown in Fig.1.
2) Point the mount to the North, or South in the
Southern Hemisphere. Clip the motor controller
holder onto the leg that's on the right hand side
of the mount, as seen in Fig.2.
3) Slide the motor controller into the holder, as
Fig.3 Fig.4
seen in Fig.3
4) Rotate the mount in Dec axis so that the Dec
motor is on the same side of the receptacles of
the mount, as seen in Fig.4.
DC 12V Auto
Gui de
SynScan
190107V1