Escolar Documentos
Profissional Documentos
Cultura Documentos
FIZIK KERTAS 3
(4531/3)
TINGKATAN 4
PERATURAN PERMARKAHAN
Total
Question Answer Mark
Mark
(a)(i) Manipulated variable = Temperature // 1
1 (ii) Responding variable = Length of air column // x 1
Constant variable = Cross sectional area of capillary tube//
(iii) Mass of air 1
// atmospheric pressure
(b) (i) To produce dry air 1
x = 2.0, 3.7, 5.2, 6.7, 8.3, 10.0
2
(ii) All correct: 2 marks
At least 4 correct: 1 mark
(iii) / 0C x / cm
0 2.0
20 3.7
40 5.2
60 6.7
80 8.3
100 10.0 3
Total
Question Answer Mark
Mark
2 (a)(i) h m // h is directly proportional to x 1 1
Draw the intrapolation line from h = 0.7 to the given line and
1
from the given line to the f axis
(ii) 1 3
Determine the value of h correctly
1
h = 0.056 m
Calculate the gradient of the graph, k, and state the value of k
within the acceptable range
1
-Draw a sufficiently large triangle (4 x 5)
(iii) 1 3
-Correct substitution (Follow candidates triangle)
1
State the value/answer with correct unit
0.08 m/ kg or 0.08 m kg-1
Calculate the value of p and state the value within the 1
acceptable range
1
(b) Correct substitution 1 3
Total
Question Answer Mark
Mark
Tissue funnel, manometer, measuring cylinder, water, salt, electronic 1 1
scales, rubber tubes,ruler, thin rubber tube, retort stand
(iv) rrangement of apparatus :
1 1
Total
Question Answer Mark
Mark
(viii)
density
1 1
pressure
TOTAL 12
Total
Question Answer Mark
Mark
4 State a suitable inference 1 1
(a)
The extension of spring depends on force
State a relevant hypothesis 1 1
(b)
The greater the force, the greater the extension of the spring
State the aim of experiment 1 1
(c)(i) To investigate the relationship between the force and the extension
of the spring
State the manipulated variable and the responding variable 1 1
Manipulated : force
(ii) Responding : extension of spring
State ONE variable that kept constant 1 1
Diameter of spring, diameter of coil, spring constant
Complete list of apparatus and materials 1 1
(iii) Spring, slotted weight, pin, retort stand, metre rule
Arrangement of apparatus : 1 1
(iv)
Total
Question Answer Mark
Mark
State the method of controlling the manipulated variable
1. Initial length of spring, l0 is measured and recorded. 1 3
2. A slotted weight of mass, m = 50 g is added at the end of the
spring.
Tabulation of data: 1 1
m/g x/cm
(vi)
Total marks 12 12