Escolar Documentos
Profissional Documentos
Cultura Documentos
1.213 m
Vu
Anchor bar same dia as of As 3.5 m
> 70*dia of As bars a (preferably welded to As)
1.200 m < 0.45d = 0.855
Hu > 0.60d = 1.140
1.900 m
S 0.700 45 degrees
Ah d' h
stirrups Av
Load per bearing
vertical
in this
d' /3
zone
Loads Static Load_fac Stat_l_fac Seismic Load_fac seismic_l_fac
DL 238.48 1.25 298.1 238.48 1.25 298.1
SDL 112.20 2 224.4 112.20 2 224.4
Framing Bar for caging Live Load 69.00 1.75 120.8 13.80 1.4 19.3
(dia. same as of Ah bars) Long Load 15.00 1.75 26.3 15.00 1.4 21.0
Vertical Seismic_T 15.31 1.25 19.1
Horizont. Seismic_T 22.96 1.25 28.7
If section is O.K. Only then Av is calculated. This condition is from an overall philosophical
standpoint to avoid shear - compression failure and to cover the effects of approximations
made in converting the structure into the approximated mathematical model. it is preferable to
provide vertical stirrups for shear rather than crank the flexural reinforcement since the latter
detail the resulatant vectorial outward force at the bend in the cranked reinforcement has the
tendancy to wedge-out the concrete lying within the bend.
Av = 0.5*(643.25*10000-4440000)*100/(415*1480) =
162.203 mm2
dia = 12 mm
Spacing= 1394.52 mm c/c
providing spacing= 150 mm c/c
Legs = 2
Reinfor prov = 1507.96 mm2
= 13025.21 mm2
Hu = 26.25 ton<0.2Vu
At = Hu/0.85 fsy
= 128.65x10000 / (0.85x415 )
= 3647.06 mm2
Step 5 Calculate flexural-tension reinforcemet Af
Af = (Vu*a+Hu*(h-d')
0.85*fsy*d
= 14970.69 mm2
Step 6
(Af+At) = 18617.7
(2/3 Avf + At) = 12330.5 provide 18722.89 mm2
(0.04fc/ fsy)bd' = 18722.9
No of Layers = 2 No's
dia = 25 mm
nos of bars = 39
No's = 40 No's
Area = 19634.95 mm2
Reinfor provided = 19634.95 mm2
Percentage = 0.35 %
spacing = 157.89 mm c/c
providing @ 150 mm c/c
Ah < 0.5 Af
Ah > 0.333 Avf provide larger of two, these stirrups shall be provided
below As and within a depth of 2/3d' below As
dia = 20 mm
Legs = 2
No's = 12
Reinfor provided = 7539.82 mm2