Escolar Documentos
Profissional Documentos
Cultura Documentos
Lantek Installer
INDEX
1. Pre-Requisites
1.1. Hardware
1.2. Software
2. Installation
2.1. StandAlone & Server Installations
2.2. Client Installation
2.3. Add/Remove Programs
2.4. MSDE Installation
2.5. Command Line parameters.
3. Apendicces
3.1. Appendix A. Server Installation
3.2. Appendix C. SQL Server 2005 Express Edition Features and
limitations
3.3. Appendix D. Windows Vista Limitations
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 2 of 16
Lantek Automatizacin S.L.
1. Installation Pre-Requisites
1.1 Hardware
1.1.1 Minimum requirements
a. Client
512 MB RAM.
b. Server
1 GB RAM.
1GB RAM
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 3 of 16
Lantek Automatizacin S.L.
b. Server
2 GB MB RAM.
1.2 Software
1.2.1 Supported operating systems
Windows NT service Pack 5
Windows 2000 Professional SP4
Windows XP Professional SP2
Windows XP Professional x64 Edition
2. Installation
2.1 StandAlone & Server Installations
The only difference between StandAlone and Server installations is explained in step g.
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 4 of 16
Lantek Automatizacin S.L.
Language Selection:
Introduce the name of the company and Serial number of the dongle in uppercase.
Click Next to continue.
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 5 of 16
Lantek Automatizacin S.L.
b. Start Installation:
c. License Agreement:
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 6 of 16
Lantek Automatizacin S.L.
d. Update Installation
When the installation finds a previous version of a program in your computer it will
allow you to update it. If you select any version update, the installation will jump to step
j, if yo do not select any update it will continue to the next step allowing you to perform
a new installation.
Select the main directory of the installation. The programs will be installed in their own
directories under this main directory.
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 7 of 16
Lantek Automatizacin S.L.
g. Type of Installation:
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 8 of 16
Lantek Automatizacin S.L.
h. Unit Selection:
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 9 of 16
Lantek Automatizacin S.L.
j. Ready to install
If you click Next all the necessary files for the selected programs will be copied to the
computer. It is possible to revise the settings and change them if you click Back.
k. Database options
If youre updating from a 24 or earlier version youll see the screen on the right and
youll see the screen on the left if youre installing for the first time.
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 10 of 16
Lantek Automatizacin S.L.
If you select the Create a new database the following this screen will appear asking
you for the name and the path of the new database, click OK and the database will be
created:
If you select Update an existing database youll have to select the database you want
to translate and click Translate.
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 11 of 16
Lantek Automatizacin S.L.
l. Key files
At this point the installer will ask you if you want to install the key files in that moment. If
you click yes youll have to select the directory from which the installer will take the key
files and copy to the installation directory.
m. Finish Installation
When the installation is finished you will get the following window.
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 12 of 16
Lantek Automatizacin S.L.
g. Type of Installation:
Select Client option and then click Browse Button to select the computer where the
Database Server is located. Click Next.
From this point to the end of the installation the steps are the same as the StandAlone
and Server installation.
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 13 of 16
Lantek Automatizacin S.L.
If you click on Modify the Program Selection window will appear and will allow you to
add new programs that are not installed or remove currently installed programs.
All the installed programs will appear checked and if you uncheck any of them it will be
uninstalled. If you check any program that was not previously checked, it will install that
program in the computer.
If you do not uncheck a previously checked program, it will do nothing with that
program.
If you click Repair button, the installation program will repeat the last installation that
was performed in the computer.
If you click Remove All button, All the programs of the current installation will be
removed:
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 14 of 16
Lantek Automatizacin S.L.
Setup.exe /znovers
3 Appendices
3.1 Appendix A. Server Installation
If the computer where Lantek programs are installed, is connected to a network, the database folder (
usually C:\Lantek\Database ) will be shared in the network with the following name: DATABASE$.
This can be checked just typing in \\ServerName\DATABASE$ in the run command of your O.S, where
ServerName is the name of the computer where the standalone installation has been performed. If the
command is sucessful, an explorer window will appear showing the contents of the database files folder.
In that folder a file called Database.ini can be found. Following the contents of the file:
[Database]
These parameters are only necessary for the installer when performing a client installation.
All database connection parameters are stored in a file called lfocus.cfg in Expert main folder.
LSystem
[Server Name] ; Specifies the server where MSDE or Sql Server is installed.
ServerName
[Database files directory] ; Specifies the local folder where the database is created.
C:\LANTEK\DATABASE
[Shared server directory] ; Specifies the network shared folder where the database has been created.
DATABASE$
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 15 of 16
Lantek Automatizacin S.L.
If the computer is not connected to a network, the [Shared Server directory] parameter will be blank or
the same as the [Database files Directory] parameter. Both parameters are used only when creating a
new database.
Example:
We have two computers which are connected to network, one will be the server ( COMPUTER1 ) and
the other the client ( COMPUTER2 ).
COMPUTER2: We make a client installation in C:\LANTEK\EXPERT and select that the server computer
will be COMPUTER1. ( see step h of client installation ).
..
[Work database]
Test
[Server Name]
COMPUTER1
C:\LANTEK\DATABASE
DATABASE$
Robust and reliable installation using either graphical user interface (GUI) or silent modes.
G:\Common\Info\Install\english\Install.doc 10/11/a
Lantek Installer Page 16 of 16
Lantek Automatizacin S.L.
Deep integration with Visual Studio to provide access to rich data controls like the
DataGridView, DataNavigator, and DataConnector.
Support for disconnected systems with SQL Server Service Broker and Replication.
SQL Server Express Manager, a new, easy-to-use database management and query
analysis tool.
If you install this software on Windows Vista you must change the appearance of the windows for a
proper visualization. To achieve that go to Control Panel->Appearance and Themes->Display, then
select Windows Classic and press OK.
G:\Common\Info\Install\english\Install.doc 10/11/a