Escolar Documentos
Profissional Documentos
Cultura Documentos
0020 X Inspection and Test Plan (ITP) Review Manufacturer inspection and test plan.
0020
0010
*** X
In process inspection & test requirement
Pipes and fittings
Specification Details / Notes:
Per 01-SAMSS-025 (See Note 3)
0040 X Workmanship Per 01-SAMSS-025. Interior surface of pipe prior to lining shall
be clean and free of sharp corners, burs, rust, scale or other
protrusions
0060 X PTFE/PFA material properties, specific gravity & Resistivity Per 01-SAMSS-025
IR012200 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 08/25/2011 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: IR012200 2 of 2
(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)
(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0100 X X Vacuum test Per 01-SAMSS-025
0030
0010
***
X X
Final inspection & test requirements
Visual and Dimensional Check
Specification Details / Notes:
Per 01-SAMSS-025 and PO requirement
Notes:
(1) May only be waived by the responsible Saudi Aramco, ASC, or AOC Inspection Offices.
(2) See form IR000003 for instructions on using this form.
(3) Carbon steel pipes must be from Saudi Aramco approved source
End of IR012200