Escolar Documentos
Profissional Documentos
Cultura Documentos
384-E5
New Line of
chipbreakers for
Medium to Heavy
cutting TUNGALOY
Features
TUNGALOY
2
Columnar Stabilization Technology
Conventional
Crystal structure
Substrate
Stress Stress
Disperses Chipping
the stress
Prevents randomly developed cracks !!
Result
Even under heavy interrupted cutting, the tool life
of the T9125 is extremely stable.
3
Grades
P05 conventional
High
T9105
P05 P15 conventional
T9115
P10
Cutting speed
T9125
T9115 P20
P25 P35
T9125 P30
conventional
T9135
T9135 P35
P40
Low Light Interrupted Light Medium Heavy Interrupted
Medium cutting Heavy cutting cutting
cutting cutting cutting cutting cutting
T9115 formed
T9105 shows excellent performance during high
13.9 91.0 2.5 columnar
speed cutting.
P10 - P20 crystal
16 T9115 demonstrates a good balance of wear
TiCN
and impact resistance. Applicable for continuous
Steel T9125 + to light interrupted cutting.
13.7 90.0 2.6 Al2O3
P20 - P30 T9125 demonstrates excellent chipping
resistance. Applicable for medium to heavy
T9135 cutting.
13.5 89.0 2.6 T9135 shows excellent impact resistance during
P30 - P40 heavy interrupted cutting.
4
Complementary chipbreakers
7 7 14 TUS
6 6 12
THS
All-round 25
Depth of cutap (mm)
3 ZF 3 6 19
AFW ASW 12,16
19,25
4
2 2
S
1 1 2
AS 12,16
TRS
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
Feed: f (mm/rev) Feed: f (mm/rev) Feed: f (mm/rev)
function.
Finishing
to medium Superior chip control in profiling and machining rounded forms.
Ideally suited for machining lead free steels.
cutting ZM
7
cutting
Sharp cutting edge and simply designed chipbreaker offer
exceptional chip control and high productivity in medium
S 0.15
cutting applications.
15
Medium New Single sided chipbreaker delivers exceptional chip control when
to heavy 0.3 medium to heavy cutting. Small protrusions near the cutting
cutting TRS
24
sided) resistance.
5
Standard cutting conditions
Application Machining mode Chipbreaker Grades Cutting speed Depth of cut Feed
Vc (m/min) ap (mm) f (mm/rev)
Continuous T9105 180 - 350
Continuous to Light interrupted T9115 100 - 300
Light interrupted
ZF T9125 80 - 180
0.2 - 1.5 0.07 - 0.2
6
Chipbreaker (For positive type inserts)
20
chip control at a low depth of cut and
5
reduces chip control problems.
PSF PSS PM
4 The PSS chipbreaker is suitable
Finishing 0.15 for finishing to light cutting
3 to light PSS in stainless steel and internal
10
2
PS cutting turning. It has excellent chip
control with low cutting forces.
This three-dimensional, finishing
1 Finishing chipbreaker features excellent chip
control and a sharp cutting action.
to medium PS
10
The economical M class insert
is applicable for a wide range of
0 0 0.1
0.1 0.2
0.20.3
0.30.4
0.40.5
0.50.6
0.60.7
0.7 cutting applications, delivering highly efficient
boring.
Feed: f (mm/rev)
Basic chipbreaker for medium
Medium 0.15 cutting. This features excellent
PM cutting sharpness and chip
8
cutting
control.
7
Inserts Negative type
Rhombic, 80
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
ZF 10 CNMG120404-ZF 0.4
2
12.7 4.76 5.16
8
1 *CNMG120408-ZF 0.8
ap (mm)
6
0 0.1 0.2
4
2
0.2
0 0.2 0.4 0.6 0.8 1.0
10
f (mm/rev)
16
f (mm/rev)
CNMG120412-TSF 1.2
13
f (mm/rev)
TS 10
CNMG120404-TS 0.4
8 *CNMG120408-TS 12.7 4.76 5.16 0.8
ap (mm)
6
CNMG120412-TS 1.2
4
2
10
AFW 10
CNMG120404-AFW 0.4
12.7 4.76 5.16
8 *CNMG120408-AFW 0.8
6
ap (mm)
2
12
AS 10 CNMG120404-AS 0.4
8 *CNMG120408-AS 12.7 4.76 5.16 0.8
6
ap (mm)
CNMG120412-AS 1.2
4
High
18
2
0.2
0 0.2 0.4 0.6 0.8 1.0
18
f (mm/rev)
8
Rhombic, 80 Negative inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
NM 10
CNMG120408-NM 0.8
12.7 4.76 5.16
8 *CNMG120412-NM 1.2
ap (mm)
6
2
12
6
CNMG120416-ZM 1.6
4
2
7
f (mm/rev)
TM CNMG090304-TM 0.4
9.525 3.18 3.81
CNMG090308-TM 0.8
CNMG120404-TM 0.4
*CNMG120408-TM 0.8
ap (mm)
CNMG160612-TM 15.875 6.35 6.35 1.2
f (mm/rev)
CNMG190608-TM 0.8
19.05 6.35 7.93
CNMG190612-TM 1.2
All-round CNMG090304 0.4
9.525 3.18 3.81
CNMG090308 0.8
CNMG120404 0.4
*CNMG120408 0.8
12.7 4.76 5.16
CNMG120412 1.2
Medium CNMG120416 1.6
cutting
ap (mm)
CNMG160608 0.8
CNMG160612 15.875 6.35 6.35 1.2
0.2
CNMG160616 1.6
15
f (mm/rev)
CNMG190608 0.8
CNMG190612 19.05 6.35 7.93 1.2
CNMG190616 1.6
DM 10 CNMG120404-DM 0.4
8
*CNMG120408-DM 12.7 4.76 5.16 0.8
6
CNMG120412-DM 1.2
ap (mm)
0.25 2
15
f (mm/rev)
S CNMG120404R-S 0.4
CNMG120404L-S 0.4
12.7 4.76 5.16
ap (mm)
*CNMG120408R-S 0.8
f (mm/rev)
9
Rhombic, 80 Negative inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
TH *CNMG120408-TH 0.8
CNMG120412-TH 12.7 4.76 5.16 1.2
ap (mm)
CNMG120416-TH 1.6
CNMG160612-TH 1.2
15.875 6.35 6.35
CNMG160616-TH 1.6
0.3
CNMG190612-TH 1.2
Medium
20
12
CNMG120416-THS 1.6
*CNMG160612-THS 1.2
ap (mm)
9
15.875 6.35 6.35
6
CNMG160616-THS 1.6
0.4 3
CNMG190612-THS 1.2
20
to heavy 15.875 6.35 6.35
CNMM160616-TRS 1.6
cutting
(Single 0.3
CNMM190616-TRS 1.6
sided) 19.05 6.35 7.93
24
18
25
CNMM190624-TU 2.4
12
CNMM250924-TU 25.4 9.52 9.12 2.4
0.35 6 19
Heavy
0 0.4 0.8 1.2 1.6 2.0
20
cutting f (mm/rev)
(Single
sided) TUS *CNMM190608-TUS 0.8
New CNMM190612-TUS 1.2
CNMM190616-TUS 19.05 6.35 7.93 1.6
ap (mm)
25 CNMM190624-TUS 2.4
CNMM190632-TUS 3.2
0.45 19
CNMM250916-TUS 1.6
20
to CNMA120416 1.6
medium 4
cutting 2
10
Rhombic, 55 Negative inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
ZF 10 DNMG150404-ZF 0.4
2
8
1 DNMG150408-ZF 12.7 4.76 5.16 0.8
ap (mm)
6
0 0.1 0.2 DNMG150412-ZF 1.2
4
2 DNMG150604-ZF 0.4
0.2
DNMG150608-ZF 12.7 6.35 5.16 0.8
10
16
f (mm/rev)
TSF
DNMG150404-TSF 0.4
*DNMG150408-TSF 12.7 4.76 5.16 0.8
ap (mm)
DNMG150412-TSF 1.2
DNMG150604-TSF 0.4
DNMG150608-TSF 12.7 6.35 5.16 0.8
13
f (mm/rev) DNMG150612-TSF 1.2
TS 10
DNMG150404-TS 0.4
8 *DNMG150408-TS 12.7 4.76 5.16 0.8
ap (mm)
6
DNMG150412-TS 1.2
4
DNMG150608-TS 0.8
2
12.7 6.35 5.16
DNMG150612-TS 1.2
10
AS 10 DNMG150404-AS 0.4
8 *DNMG150408-AS 12.7 4.76 5.16 0.8
ap (mm)
6
DNMG150412-AS 1.2
4
DNMG150604-AS 0.4
2
2
31
f (mm/rev)
NM 10 *DNMG150408-NM 0.8
12.7 4.76 5.16
8 DNMG150412-NM 1.2
ap (mm)
f (mm/rev)
ZM 10
*DNMG150408-ZM 0.8
12.7 4.76 5.16
8 DNMG150412-ZM 1.2
ap (mm)
6
DNMG150608-ZM 0.8
4 12.7 6.35 5.16
2
DNMG150612-ZM 1.2
7
11
Rhombic, 55 Negative inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
TM DNMG110404-TM 0.4
9.525 4.76 3.81
DNMG110408-TM 0.8
DNMG150404-TM 0.4
*DNMG150408-TM 0.8
ap (mm)
12.7 4.76 5.16
DNMG150412-TM 1.2
0.2
DNMG150416-TM 1.6
6
12.7 4.76 5.16
DNMG150412 1.2
0.2
DNMG150416 1.6
Medium
DNMG150604 0.4
15
cutting f (mm/rev)
DNMG150608 0.8
12.7 6.35 5.16
DNMG150612 1.2
DNMG150616 1.6
DM 10
*DNMG150408-DM 0.8
12.7 4.76 5.16
8 DNMG150412-DM 1.2
6
ap (mm)
DNMG150604-DM 0.4
4
DNMG150608-DM 0.8
0.25 2
12.7 6.35 5.16
DNMG150612-DM 1.2
15
DNMG150408L-S 0.8
0.15
DNMG150604R-S 0.4
DNMG150604L-S 0.4
15
12.7 6.35 5.16
f (mm/rev) DNMG150608R-S 0.8
DNMG150608L-S 0.8
TH *DNMG150408-TH 0.8
DNMG150412-TH 12.7 4.76 5.16 1.2
ap (mm)
DNMG150416-TH 1.6
DNMG150608-TH 0.8
0.3
DNMG150612-TH 12.7 6.35 5.16 1.2
20
Medium f (mm/rev) DNMG150616-TH 1.6
to heavy
cutting THS DNMG150408-THS 0.8
New DNMG150412-THS 12.7 4.76 5.16 1.2
ap (mm)
DNMG150416-THS 1.6
DNMG150608-THS 0.8
0.4
*DNMG150612-THS 12.7 6.35 5.16 1.2
20
12
Square, 90 Negative inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
NS *SNMG120408-NS 12.7 4.76 5.16 0.8
ap (mm)
f (mm/rev)
1 3
f (mm/rev)
TS 10 SNMG120404-TS 0.4
8 *SNMG120408-TS 12.7 4.76 5.16 0.8
ap (mm)
6
SNMG120412-TS 1.2
4
2
10
ZM 10 *SNMG120408-ZM 0.8
12.7 4.76 5.16
8 SNMG120412-ZM 1.2
Finishing
ap (mm)
6
to 4
medium 2
cutting
7
f (mm/rev)
6
feed,
small 4
depth of 2
cut
18
TM SNMG090304-TM 0.4
9.525 3.18 3.81
SNMG090308-TM 0.8
SNMG120404-TM 0.4
*SNMG120408-TM 0.8
ap (mm)
12.7 4.76 5.16
Medium SNMG120412-TM 1.2
cutting
SNMG120416-TM 1.6
0.2
SNMG150608-TM 0.8
6
13
Square, 90 Negative inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
All-round SNMG090304 0.4
9.525 3.18 3.81
SNMG090308 0.8
SNMG120404 0.4
*SNMG120408 0.8
ap (mm)
SNMG120412 12.7 4.76 5.16 1.2
SNMG120416 1.6
SNMG120420 2.0
0.2 SNMG150612 1.2
15.875 6.35 6.35
15
2
0.25
15
S SNMG120404R-S 0.4
SNMG120404L-S 0.4
12.7 4.76 5.16
ap (mm)
*SNMG120408R-S 0.8
SNMG120408L-S 0.8
0.15
15
f (mm/rev)
TH *SNMG120408-TH 0.8
12.7 4.76 5.16
SNMG120412-TH 1.2
ap (mm)
SNMG150612-TH 1.2
15.875 6.35 6.35
SNMG150616-TH 1.6
0.3
SNMG190612-TH 1.2
20
19
6
12,15 SNMG190612-THS 1.2
0.4 3 19.05 6.35 7.93
SNMG190616-THS 1.6
20
TU 30 *SNMM190616-TU 1.6
19.05 6.35 7.93
24
SNMM190624-TU 2.4
ap (mm)
Heavy 18
SNMM250724-TU 25.4 7.94 9.12 2.4
25
cutting 12
6
SNMM250924-TU 25.4 9.52 9.12 2.4
0.35 19
f (mm/rev)
*Note: Chipbreaker cross sections are of * marked insert. : Stocked items
14
Square, 90 Negative inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
TUS *SNMM190612-TUS 1.2
New SNMM190616-TUS 19.05 6.35 7.93 1.6
SNMM190624-TUS 2.4
ap (mm)
Heavy 25
SNMM250932-TUS 3.2
Triangular, 60
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
ZF TNMG160404-ZF 0.4
10
9.525 4.76 3.81
2
8 *TNMG160408-ZF 0.8
1
ap (mm)
6
0 0.1 0.2
4
2
0.2
10
NS TNMG160404-NS 0.4
9.525 4.76 3.81
*TNMG160408-NS 0.8
ap (mm)
Finishing f (mm/rev)
TSF
TNMG160404-TSF 0.4
*TNMG160408-TSF 9.525 4.76 3.81 0.8
ap (mm)
TNMG160412-TSF 1.2
13
f (mm/rev)
TS 10
TNMG160404-TS 0.4
8 *TNMG160408-TS 9.525 4.76 3.81 0.8
ap (mm)
6
TNMG160412-TS 1.2
4
2
10
AS 10 TNMG160404-AS 0.4
High 8 *TNMG160408-AS 9.525 4.76 3.81 0.8
feed,
ap (mm)
6
TNMG160412-AS 1.2
small 4
depth of 2
cut
18
CB 10 TNMG110304-CB 0.4
6.35 3.18 2.26
8
*TNMG110308-CB 0.8
ap (mm)
6
Boring
(Double 4
sided) 2
31
f (mm/rev)
15
Triangular, 60 Negative inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
NM 10 *TNMG160408-NM 0.8
9.525 4.76 3.81
8 TNMG160412-NM 1.2
6
ap (mm)
4
to f (mm/rev)
medium
ZM TNMG160404-ZM 0.4
cutting 10
2
TNMG220412-ZM 12.7 4.76 5.16 1.2
7
TM TNMG110304-TM 0.4
6.35 3.18 2.26
TNMG110308-TM 0.8
TNMG160404-TM 0.4
ap (mm)
*TNMG160408-TM 9.525 4.76 3.81 0.8
TNMG160412-TM 1.2
0.2 TNMG220408-TM 0.8
6
TNMG220412-TM 12.7 4.76 5.16 1.2
f (mm/rev)
TNMG220416-TM 1.6
All-round TNMG110304 0.4
6.35 3.18 2.26
TNMG110308 0.8
TNMG160404 0.4
*TNMG160408 0.8
ap (mm)
TNMG160412 9.525 4.76 3.81 1.2
TNMG160416 1.6
TNMG160420 2.0
0.2 TNMG220408 0.8
Medium
15
4
0.25 2
15
TNMG160408L-S 0.8
TNMG220404R-S 0.4
0.15 TNMG220404L-S 0.4
12.7 4.76 5.16
TNMG220408R-S 0.8
15
f (mm/rev)
TNMG220408L-S 0.8
TH *TNMG220408-TH 0.8
12.7 4.76 5.16
TNMG220412-TH 1.2
ap (mm)
Medium
to heavy
cutting 0.3
20
f (mm/rev)
16
Triangular, 60 Negative inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
THS TNMG220408-THS 0.8
12.7 4.76 5.16
New *TNMG220412-THS 1.2
ap (mm)
Medium
to heavy
cutting 0.4
20
f (mm/rev)
Trigon, 80
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
ZF 10 WNMG060404-ZF 0.4
2
9.525 4.76 3.81
8
1 WNMG060408-ZF 0.8
ap (mm)
6
0 0.1 0.2 WNMG080404-ZF 0.4
4
12.7 4.76 5.16
2 *WNMG080408-ZF 0.8
0.2
0 0.2 0.4 0.6 0.8 1.0
10
f (mm/rev)
NS WNMG080404-NS 0.4
12.7 4.76 5.16
*WNMG080408-NS 0.8
ap (mm)
f (mm/rev)
TSF
WNMG060404-TSF 0.4
9.525 4.76 3.81
*WNMG060408-TSF 0.8
ap (mm)
WNMG080404-TSF 0.4
Finishing
WNMG080408-TSF 12.7 4.76 5.16 0.8
WNMG080412-TSF 1.2
13
f (mm/rev)
TS 10
WNMG080404-TS 0.4
8 *WNMG080408-TS 12.7 4.76 5.16 0.8
ap (mm)
6
WNMG080412-TS 1.2
4
2
10
AFW 10
WNMG060404-AFW 0.4
9.525 4.76 3.81
8 WNMG060408-AFW 0.8
ap (mm)
6
WNMG080404-AFW 0.4
4 12.7 4.76 5.16
*WNMG080408-AFW 0.8
2
12
AS 10 WNMG080404-AS 0.4
High 8
*WNMG080408-AS 12.7 4.76 5.16 0.8
ap (mm)
feed, 6
WNMG080412-AS 1.2
small 4
depth of 2
cut
18
f (mm/rev)
17
Trigon, 80 Negative inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
ASW 10 WNMG060408-ASW 0.8
9.525 4.76 3.81
High 8
WNMG060412-ASW 1.2
feed, 6
ap (mm)
*WNMG080408-ASW 0.8
small 4
12.7 4.76 5.16
depth of 2 WNMG080412-ASW 1.2
cut 0.2
0 0.2 0.4 0.6 0.8 1.0
18
f (mm/rev)
CB 10
WNMG060404-CB 0.4
8 9.525 4.76 3.81
*WNMG060408-CB 0.8
ap (mm)
6
Boring
4
(Double
sided) 2
f (mm/rev)
NM 10 *WNMG080408-NM 0.8
12.7 4.76 5.16
8
WNMG080412-NM 1.2
6
ap (mm)
f (mm/rev)
to
medium ZM 10 WNMG060408-ZM 0.8
cutting 9.525 4.76 3.81
8
WNMG060412-ZM 1.2
6
ap (mm)
*WNMG080408-ZM 0.8
4
f (mm/rev)
TM WNMG060404-TM 0.4
9.525 4.76 3.81
WNMG060408-TM 0.8
WNMG080404-TM 0.4
ap (mm)
*WNMG080408-TM 0.8
0.2 12.70 4.76 5.16
6
WNMG080412-TM 1.2
f (mm/rev) WNMG080416-TM 1.6
All-round WNMG060404 0.4
Medium 9.525 4.76 3.81
WNMG060408 0.8
cutting
WNMG080404 0.4
ap (mm)
*WNMG080408 0.8
0.2
12.7 4.76 5.16
WNMG080412 1.2
15
f (mm/rev) WNMG080416 1.6
DM 10
*WNMG080408-DM 0.8
12.7 4.76 5.16
8 WNMG080412-DM 1.2
6
ap (mm)
0.25 2
15
18
Trigon, 80 Negative inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
TH *WNMG080408-TH 0.8
WNMG080412-TH 12.7 4.76 5.16 1.2
ap (mm)
WNMG080416-TH 1.6
WNMG100612-TH 1.2
0.3 15.875 6.35 6.35
Medium WNMG100616-TH 1.6
20
to heavy f (mm/rev)
cutting
THS WNMG080408-THS 0.8
New
*WNMG080412-THS 12.7 4.76 5.16 1.2
WNMG080416-THS 1.6
ap (mm)
WNMG100612-THS 1.2
0.4 15.875 6.35 6.35
WNMG100616-THS 1.6
20
f (mm/rev)
Rhombic, 35
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
ZF VNMG160404-ZF 0.4
*VNMG160408-ZF 9.525 4.76 3.81 0.8
ap (mm)
VNMG160412-ZF 1.2
13
f (mm/rev)
Finishing 4
VNMG160412-TSF 1.2
2
10
f (mm/rev)
TS 10
VNMG160404-TS 0.4
2
8
1
*VNMG160408-TS 9.525 4.76 3.81 0.8
ap (mm)
6
0 0.1 0.2 VNMG160412-TS 1.2
4
2
0.2
10
ZM 10 *VNMG160408-ZM 0.8
9.525 4.76 3.81
8
VNMG160412-ZM 1.2
Finishing
ap (mm)
to 4
medium 2
cutting
7
TM VNMG160404-TM 0.4
*VNMG160408-TM 9.525 4.76 3.81 0.8
ap (mm)
Medium VNMG160412-TM 1.2
cutting
0.2
6
f (mm/rev)
19
Rhombic, 35 Negative inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
All-round VNMG160404 0.4
*VNMG160408 9.525 4.76 3.81 0.8
ap (mm)
VNMG160412 1.2
0.2
15
Medium f (mm/rev)
cutting
DM 10 *VNMG160408-DM 0.8
9.525 4.76 3.81
8 VNMG160412-DM 1.2
ap (mm)
0.25 2
15
Rhombic, 25
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
ZF 5 YNMG160404-ZF 0.4
4 9.525 4.76 3.81
*YNMG160408-ZF 0.8
3
ap (mm)
2
08
1
04
0.2
Finishing 0 0.1 0.2 0.3 0.4 0.5
10
to f (mm/rev)
medium
cutting ZM 5 YNMG160404-ZM 0.4
9.525 4.76 3.81
4 *YNMG160408-ZM 0.8
ap (mm)
1 08
04
7
Round
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
61 10 RNMG090300-61 9.525 3.97 3.81 -
8 *RNMG120400-61 12.7 4.76 5.16 -
Heavy
ap (mm)
6
cutting
25 RNMG150600-61 15.875 6.35 6.43 -
4
0.15 2
15,19
09,12 RNMG190600-61 19.05 6.35 7.93 -
RNMG250900-61 25.4 9.52 9.22 -
15
20
Inserts Positive type
Rhombic, 80 (7)
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PSF 10
CCMT060204-PSF 6.35 2.38 2.8 0.4
8
CCMT09T304-PSF 0.4
ap (mm)
6 9.525 3.97 4.4
4 *CCMT09T308-PSF 0.8
Finishing
2
0.12
0 0.2 0.4 0.6 0.8 1.0
20
f (mm/rev)
9.525 3.97 4.4
to light CCMT09T308-PSS 0.8
cutting CCMT120404-PSS 0.4
0.15
CCMT120408-PSS 12.7 4.76 5.5 0.8
10
*CCMT060208-PS 0.8
Finishing CCMT09T302-PS 0.2
ap (mm)
CCMT120404-PS 0.4
f (mm/rev)
CCMT120408-PS 12.70 4.76 5.5 0.8
CCMT120412-PS 1.2
PM 10 CCMT060204-PM 0.4
6.35 2.38 2.8
8
CCMT060208-PM 0.8
ap (mm)
6
Medium CCMT09T304-PM 0.4
4
cutting *CCMT09T308-PM 9.525 3.97 4.4 0.8
2
0.15
CCMT09T312-PM 1.2
8
Rhombic, 80 (11)
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PSF 10
CPMT060204-PSF 6.35 2.38 2.8 0.4
8
CPMT080204-PSF 7.94 2.38 3.4 0.4
ap (mm)
4
*CPMT090304-PSF 9.525 3.18 4.4 0.4
Finishing 2 CPMT09T304-PSF 9.525 3.97 4.4 0.4
0.12
20
9.523 3.97 4.4
f (mm/rev) CPMT09T308-PSS 0.8
21
Rhombic, 80 (11) Positive inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PS CPMT060202-PS 0.2
6.35 2.38 2.8
CPMT060204-PS 0.4
CPMT080202-PS 0.2
CPMT080204-PS 7.94 2.38 3.4 0.4
Finishing ap (mm)
CPMT080208-PS 0.8
to
medium
*CPMT090304-PS 0.4
cutting 9.525 3.18 4.4
10
CPMT090308-PS 0.8
f (mm/rev) CPMT09T302-PS 0.2
CPMT09T304-PS 9.525 3.97 4.4 0.4
CPMT09T308-PS 0.8
PM 10 CPMT060208-PM 6.35 2.38 2.8 0.8
8 *CPMT090304-PM 0.4
6 9.525 3.18 4.4
Medium
ap (mm)
CPMT090308-PM 0.8
cutting 4
2
0.15
8
Rhombic, 55 (7)
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PSF DCMT070204-PSF 6.35 2.38 2.8 0.4
*DCMT11T304-PSF 0.4
9.525 3.97 4.4
ap (mm)
DCMT11T308-PSF 0.8
Finishing
0.12
20
f (mm/rev)
to light
cutting DCMT11T308-PSS 9.525 3.97 4.4 0.8
0.15
DCMT11T312-PSS 1.2
10
f (mm/rev)
PS DCMT070202-PS 0.2
*DCMT070204-PS 6.35 2.38 2.8 0.4
Finishing DCMT070208-PS 0.8
ap (mm)
to DCMT11T302-PS 0.2
medium
cutting *DCMT11T304-PS 0.4
9.525 3.97 4.4
DCMT11T308-PS 0.8
10
f (mm/rev)
DCMT11T312-PS 1.2
PM DCMT070204-PM 0.4
10 6.35 2.38 2.8
8 DCMT070208-PM 0.8
ap (mm)
22
Square, 90 (7) Positive inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PS
*SCMT09T304-PS 0.4
9.525 3.97 4.4
SCMT09T308-PS 0.8
Finishing
ap (mm)
SCMT120404-PS 0.4
to 12.7 4.76 5.5
medium
SCMT120408-PS 0.8
cutting
10
f (mm/rev)
PM 10
*SCMT09T304-PM 0.4
9.525 3.97 4.4
8 SCMT09T308-PM 0.8
ap (mm)
Medium 6
SCMT120408-PM 0.8
cutting 4 12.7 4.76 5.5
2
SCMT120412-PM 1.2
0.15
8
f (mm/rev)
Square, 90 (11)
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PS SPMT090304-PS 0.4
9.525 3.18 4.4
SPMT090308-PS 0.8
Finishing
ap (mm)
SPMT120404-PS 0.4
to 12.7 4.76 5.5
medium *SPMT120408-PS 0.8
cutting
10
f (mm/rev)
Triangular, 60 (7)
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PSF TCMT090204-PSF 5.56 2.38 2.5 0.4
*TCMT110204-PSF 6.35 2.38 2.8 0.4
ap (mm)
TCMT110304-PSF 6.35 3.18 2.8 0.4
Finishing
f (mm/rev)
Finishing
to light TCMT110304-PSS 0.4
6.38 3.18 2.8
cutting
TCMT110308-PSS 0.8
0.15
TCMT16T304-PSS 0.4
10
f (mm/rev)
TCMT16T308-PSS 9.525 3.97 4.4 0.8
TCMT16T312-PSS 1.2
23
Triangular, 60 (7) Positive inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PS TCMT110202-PS 0.2
*TCMT110204-PS 6.35 2.38 2.8 0.4
TCMT110208-PS 0.8
Finishing TCMT110302-PS 0.2
to ap (mm) TCMT110304-PS 6.35 3.18 2.8 0.4
medium
cutting
TCMT110308-PS 0.8
10
TCMT16T302-PS 0.2
f (mm/rev) TCMT16T304-PS 9.525 3.97 4.4 0.4
TCMT16T308-PS 0.8
PM 10 TCMT110204-PM 0.4
6.35 2.38 2.8
8 TCMT110208-PM 0.8
ap (mm)
6
Medium *TCMT16T304-PM 0.4
4
cutting TCMT16T308-PM 9.525 3.97 4.4 0.8
2
0.15
0 0.2 0.4 0.6 0.8 1.0
TCMT16T312-PM 1.2
8
f (mm/rev)
Triangular, 60 (11)
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PSF TPMT090204-PSF 5.56 2.38 2.5 0.4
*TPMT110204-PSF 6.35 2.38 2.8 0.4
ap (mm)
TPMT110304-PSF 6.35 3.18 3.4 0.4
Finishing
TPMT130304-PSF 7.94 3.18 3.4 0.4
0.12
TPMT16T304-PSF 9.525 3.97 4.4 0.4
20
f (mm/rev)
Finishing
TPMT110304-PSS 0.4
to light 6.35 3.18 3.4
TPMT110308-PSS 0.8
cutting 0.15
TPMT130304-PSS 0.4
7.94 3.18 3.4
10
TPMT130308-PSS 0.8
f (mm/rev)
TPMT16T304-PSS 0.4
9.525 3.97 4.4
TPMT16T308-PSS 0.8
PS TPMT090202-PS 0.2
TPMT090204-PS 5.56 2.38 2.5 0.4
TPMT090208-PS 0.8
TPMT110202-PS 0.2
TPMT110208-PS 0.8
to
medium
TPMT110304-PS 0.4
6.35 3.18 3.4
cutting TPMT110308-PS 0.8
10
TPMT130302-PS 0.2
f (mm/rev) TPMT130304-PS 7.94 3.18 3.4 0.4
TPMT130308-PS 0.8
TPMT16T304-PS 0.4
9.525 3.97 4.4
TPMT16T308-PS 0.8
24
Triangular, 60 (11) Positive inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PM TPMT110204-PM 0.4
6.35 2.38 2.8
TPMT110208-PM 0.8
10 TPMT110304-PM 0.4
6.35 3.18 3.4
Medium
8
TPMT110308-PM 0.8
ap (mm) 6
cutting TPMT130304-PM 0.4
4
7.94 3.18 3.4
0.15 2 TPMT130308-PM 0.8
8
TPMR160304-PS 0.4
to 9.525 3.18 -
medium TPMR160308-PS 0.8
cutting
10
f (mm/rev)
Trigon, 80 (11)
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
ML 10
*WPMT090725ZPR-ML
15.0 7 5.5 2.5
8 WPMT090725ZPL-ML
ap (mm)
Heavy 6
cutting 4
f (mm/rev)
Rhombic, 35 (5)
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PSF
VBMT110304-PSF 6.35 3.18 2.8 0.4
*VBMT160404-PSF 9.525 4.76 4.4 0.4
ap (mm)
Finishing
0.12
20
f (mm/rev)
PSS
VBMT110304-PSS 0.4
6.35 3.18 2.8
VBMT110308-PSS 0.8
ap (mm)
Finishing
*VBMT160404-PSS 0.4
to light
cutting
VBMT160408-PSS 9.525 4.76 4.4 0.8
0.15
VBMT160412-PSS 1.2
10
f (mm/rev)
25
Rhombic, 35 (5) Positive inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PS *VBMT110302-PS 0.2
VBMT110304-PS 6.35 3.18 2.8 0.4
ap (mm)
Finishing
to
VBMT110308-PS 0.8
medium VBMT160402-PS 0.2
cutting
10
Rhombic, 35 (7)
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
PSF
VCMT080204-PSF 4.76 2.38 2.3 0.4
VCMT110304-PSF 6.35 3.18 2.8 0.4
ap (mm)
*VCMT160404-PSF 0.4
Finishing 9.525 4.76 4.4
VCMT160408-PSF 0.8
0.12
20
f (mm/rev)
Finishing *VCMT160404-PSS 0.4
to light
9.525 4.76 4.4
VCMT160408-PSS 0.8
cutting 0.15
10
f (mm/rev)
PS VCMT110302-PS 0.2
VCMT110304-PS 6.35 3.18 2.8 0.4
ap (mm)
Finishing
*VCMT110308-PS 0.8
to
f (mm/rev)
Rhombic, 25 (7)
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
ZF 5 YWMT11T202-ZF 0.2
4.679 2.78 2.3
4 YWMT11T204-ZF 0.4
3
ap (mm)
*YWMT16T302-ZF 0.2
2 0.2
1
0.8
YWMT16T304-ZF 7.018 3.97 2.86 0.4
Finishing 0.4
YWMT16T308-ZF 0.8
8
1
7
26
Round, (7) Positive inserts
Chipbreaker Stocked grades Dimensions (mm)
Application Appearance f - ap Cat. No Coated I.C.dia Thick- Hole Corner
ness dia radius
(Cross section) T9105 T9115 T9125 T9135 d s d1 r
RS RCMT10T3M0-RS 10.0 3.97 4.4 -
10
8
RCMT1204M0-RS 12.0 4.76 4.4 -
Finishing
*RCMT1606M0-RS 16.0 6.35 5.5 -
ap (mm)
6
to
medium 4
RCMT2006M0-RS 20 6.35 6.5 -
cutting
5
0.2 2
RCMT2507M0-RS 25 7.94 7.6 -
0 0.2 0.4 0.6 0.8 1.0
f (mm/rev)
8
*RCMT0602M0-61 6.0 2.38 2.8 -
ap (mm)
0.15 2
20
cutting f (mm/rev)
f (mm/rev)
27
Practical examples
Workpiece type Automotive parts Shaft parts
Insert WNMG080412-TM DNMG150412-TM
Grade T9105 T9105
S45C / C45 S45C / C45
55 mm
55 mm
Work material
30 mm
80 mm
Cutting conditions
Tool life is doubled. T9105 grade offers T9105 at least doubles the tool life.
long and stable tool life due to high This grade offers extended tool life with
wear and chipping resistance. improved wear and chipping resistance.
50 mm
Work material
Cutting conditions
1.2 times
Tool life is
longer tool
T9115 Doubled ! T9115
life !
Results Competitor Competitor
28
Workpiece type Bearing parts Machine parts
Insert WNMG080408-ZM CNMG120408-TM
Grade T9115 T9115
SCM415 / 18CrMo4 S45C / C45
35 mm
100 mm
Work material
Cutting conditions
T9115 T9115
5
Chipping
Competitor Competitor
Results
0 100 200 300 400 0 20 40 60 80 100
Number of pieces Number of pieces
T9105 has 1.5 times longer tool life. Increases productivity by 30%.
The T9115 offers extremely stable Machine down-time is reduced.
tool life with exceptional fracture
resistance that prevents any sudden
tool breakages.
70 mm
100 mm
180 mm
Work material
Cutting conditions
Tool life is
T9115 T9125 Doubled !
The T9115 machined 190 pieces continuously. Tool life has been doubled. The T9125
The competitor insert machined between grade prevents the occurrence of
100 to 150 pieces, proving very unstable chipping and fracture.
with frequent fractures. Tool life is extended
1.5 times with Tungaloy insert.
29
Workpiece type Automotive parts Machine parts
Insert CNMG120408-TM WNMG080408
Grade T9125 T9125
SCr420 / 20Cr4 S20C / C22E
50 mm
120 mm
80 mm
Work material
Cutting conditions
Competitor Competitor
Results
0 100 200 300 0 100 200 300
Number of pieces Number of pieces
Tool life has been doubled. There was The T9125 produced 300 pieces. The
no chipping on the edge and tool life tool life of the competitors grade was
proved very stable. 80 to 100 pieces, this variation proved
unstable.
200 mm
200 mm
Work material
Cutting conditions
Tool life is
T9125 T9125 Tripled !
Competitor Competitor
Results Chipping
0 50 100 150 0 50 100 150
Number of pieces Number of pieces
Tool life has been doubled. T9125 grade T9125 has 3.0 times longer tool life.
offers stable and longer life in heavy T9125 demonstrates excellent chipping
interrupted cutting. resistance. Applicable for medium to
heavy cutting.
30
Workpiece type Automotive parts Gear parts
Insert CNMG120412-TM WNMG080412-TM
Grade T9125 T9135
SCM440 / 42CrMo4 SCM420 / 18CrMo4
100 mm
180 mm
75 mm
Work material
Cutting conditions
70 mm
Work material
Cutting conditions
T9135 has 1.5 times longer tool life. It T9135 has 2.5 times longer tool life.
reduces chipping on the cutting edge Sudden fractures on the cutting edge
when interrupted cutting. The T9135 when interrupted cutting are drastically
also provides good surface finishes and reduced to deliver significantly longer
stable tool life. tool life.
31
Tungaloy Ibrica S.L. Tungaloy Cutting Tool
C/Miquel Servet, 43B, Nau 7 (Shanghai) Co.,Ltd.
Pol. Ind. Bufalvent
ES-08243 Manresa (BCN), Spain Rm No 401 No.88 Zhabei
Phone: +34 93 113 1360 Jiangchang No.3 Rd
Fax: +34 93 876 2798 Shanghai 200436, China
www.tungaloy.es Phone: +86-21-3632-1880
Fax: +86-21-3621-1918
Tungaloy Scandinavia AB www.tungaloy.co.jp/tcts
Tungaloy Corporation
S:t Lars Vg 42A Tungaloy Cutting Tool
(Head office) SE-22270 Lund, Sweden
11-1 Yoshima-Kogyodanchi Phone: +46-462119200 (Thailand) Co.,Ltd.
Iwaki-city, Fukushima, 970-1144 Japan Fax: +46-462119207 11th Floor, Sorachai Bldg. 23/7
Phone: +81-246-36-8501 www.tungaloy.se Soi Sukhumvit 63
Fax: +81-246-36-8542 Klongtonnue, Wattana
www.tungaloy.co.jp Tungaloy Rus, LLC Bangkok 10110, Thailand
36-D Harkovsky Lane Phone: +66-2-714-3130
Tungaloy America, Inc. 308009 Belgorod, Russia Fax: +66-2-714-3134
3726 N Ventura Drive Phone: +7 4722 24 00 07 www.tungaloy.co.th
Arlington Heights,IL 60004, U.S.A. Fax: +7 4722 24 00 08
Phone: +1-888-554-8394 www.tungaloy.co.jp/ru Tungaloy Singapore (Pte.), Ltd.
Fax: +1-888-554-8392 31 Kaki Bukit Road 3, #05-19 TechLink
www.tungaloyamerica.com Tungaloy Polska Sp. z o.o. Singapore 417818
ul. Genewska 24 Phone: +65-6391-1833
Tungaloy Canada 03-963 Warszawa, Poland Fax: +65-6299-4557
432 Elgin St. Unit 3 Phone: +48-22-617-0890 www.tungaloy.co.jp/tspl
Brantford, Ontario N3S 7P7, Canada Fax: +48-22-617-0890
Phone: +1-519-758-5779 www.tungaloy.co.jp/pl Tungaloy India Pvt. Ltd.
Fax: +1-519-758-5791 Unit#13, B wing, 8th floor
www.tungaloy.co.jp/ca Tungaloy U.K. Ltd Kamala Mills Compound
The Technology Centre, Trade World, Lower Parel (West)
Tungaloy de Mexico S.A. Wolverhampton Science Park Mumbai - 4000 13. India
C Los Arellano 113, Glaisher Drive, Wolverhampton Phone: +91-22-6124-8804
Parque Industrial Siglo XXI West Midlands WV10 9RU, UK Fax: +91-22-6124-8899
Aguascalientes, AGS, Mexico 20290 Phone: +44 121 309 0163 www.tungaloy.co.jp/in
Phone: +52-449-929-5410 Fax: +44 121 270 9694
Fax: +52-449-929-5411 www.tungaloy.co.jp/uk Tungaloy Korea Co., Ltd
www.tungaloy.co.jp/mx salesinfo@tungaloyuk.co.uk #1312, Byucksan Digital Valley 5-cha
Beotkkot-ro 244, Geumcheon-gu
Tungaloy do Brasil Comrcio de Tungaloy Hungary Kft 153-788 Seoul, Korea
Ferramentas de Corte Ltda. Erzsbet kirlyn tja 125 Phone: +82-2-2621-6161
H-1142 Budapest, Hungary Fax: +82-2-6393-8952
Rua dos Sabias N.104 Phone: +36 1 781-6846 www.tungaloy.co.jp/krr
13280-000 Vinhedo, So Paulo, Brazil Fax: +36 1 781-6866
Phone: +55-19-38262757 www.tungaloy.co.jp/hu Tungaloy Malaysia Sdn Bhd
Fax: +55-19-38262757 info@tungaloytools.hu
www.tungaloy.co.jp/br 50 K-2, Kelana Mall, Jalan SS6/14
Kelana Jaya, 47301
Tungaloy Germany GmbH Tungaloy Turkey Petaling Jaya, Selangor Darul Ehsan
Dudullu Organize Sanayi Bolgesi DES Malaysia
An der Alten Ziegelei 1 Sanayi Sitesi 1 Cadde Ticaret Phone: +603-7805-3222
D-40789 Monheim, Germany Merkezi No.3/7 Fax: +603-7804-8563
Phone: +49-2173-90420-0 34779 Umraniye Istanbul, TURKEY www.tungaloy.co.jp/my
Fax: +49-2173-90420-19 Phone: +90 216 540 04 67
www.tungaloy.de Fax: +90 216 540 04 87 Tungaloy Australia Pty Ltd
Tungaloy France S.A.S. www.tungaloy.co.jp/tr Unit 308/33 Lexington Drive
info@tungaloy.com.tr Bella Vista NSW 2153, Australia
ZA Courtaboeuf - Le Rio Phone: +612-9672-6844
1 rue de la Terre de feu Tungaloy Benelux b.v. Fax: +612-9672-6866
F-91952 Courtaboeuf Cedex, France Tjalk 70 www.tungaloy.co.jp/au
Phone: +33-1-6486-4300 NL-2411 NZ Bodegraven, Netherlands
Fax: +33-1-6907-7817 Phone: +31 172 630 420 PT. Tungaloy Indonesia
www.tungaloy.fr Fax: +31 172 630 429 Kompleks Grand Wisata Block AA-10
Tungaloy Italia S.r.I. www.tungaloy-benelux.com No.3-5 Cibitung
Bekasi 17510, Indonesia
Via E. Andolfato 10 Tungaloy Croatia Phone: +62-21-8261-5808
I-20126 Milano, Italy Malinska 8 Fax: +62-21-8261-5809
Phone: +39-02-252012-1 10430 Samobor, Croatia www.tungaloy.co.jp/id
Fax: +39-02-252012-65 Phone: +385 1 3326 604
www.tungaloy.it Fax: +385 1 3327 683
Tungaloy Czech s.r.o. www.tungaloy.hr
Turanka 115
CZ-627 00 Brno, Czech Republic
Phone: +420-532 123 391
Fax: +420-532 123 392
www.tungaloy.cz
Distributed by: