Você está na página 1de 2

11/23/2017 www.sefindia.

org :: View topic - Wood & armer

www.sefindia.org
STRUCTURAL ENGINEERING FORUM OF INDIA [SEFI]

Custom Search Search

Like 74k Share Follow @sefindia 4,098 followers

Subscriptions Digest Preferences FAQ Search Memberlist Usergroups Register Security Tips Donate
Profile Log in to check your private messages Log in to website Log in to forum
Warning: Make sure you scan the downloaded attachment with updated antivirus tools before opening them. They may contain viruses.
Use online scanners here and here to upload downloaded attachment to check for safety.

Wood & armer

www.sefindia.org Forum Index -> SEFI General Discussion

View previous topic :: View next topic

Author Message

sukanta.adhikari Posted: Fri Jul 03, 2009 8:38 am Post subject: Wood & armer
General Sponsor

Dear Suju sir ,

STAAD 2006 technical manual gives this type of wood armer combination...But i could not locate
this page in STAAD 2007 and STAAD V8i

TOP REINFORCEMENT CALCULATION

Joined: 26 Jan 2003 Mx1 = Mx + abs(Mxy)


Posts: 693

My1 = My + abs(Mxy)

Mx2 = Mx + abs(Mxy2/My)

My2 = My + abs(Mxy2/Mx)

CONDITION: 1 If both Mx1 and My1 are positive, then design moment Mxd=Mx1 &
Myd=My1 2 If both Mx1 and My1 are negative, then design moment Mxd=0 & Myd=0
3 If Mx1 is negative My1 is positive, then design moment Mxd=0 & Myd=My2 4 If My1 is
negative Mx1 is positive,
then design moment Mxd=Mx2 & Myd=0

BOTTOM REINFORCEMENT CALCULATION

Mx1 = Mx - abs(Mxy)
My1 = My - abs(Mxy)
Mx2 = Mx - abs(Mxy2/My)
My2 = My - abs(Mxy2/Mx)

CONDITION: 1 If both Mx1 and My1 are positive, then design moment Mxd=0 &
Myd=0 2 If both Mx1 and My1 are negative, then design moment Mxd=Mx1 &
Myd=My1 3 If Mx1 is negative My1 is positive, then design moment Mxd=Mx2 &
Myd=0 4 If My1 is negative Mx1 is positive,
then design moment Mxd=0 & Myd=My2
I will also check this with what you have given.

Regards,
S.Adhikari

Posted via Email

Back to top

sujups Posted: Sat Jul 04, 2009 9:11 am Post subject:


...

Dear Er. S.Adhikari ,


Joined: 07 Jun 2008
Posts: 134 What you have posted are the W-A equations for orthogonal reinforcements. You can use that. If
you put alpha=90 in the equations what i have attached, you will get the same what you got from
STAAD 2006.

You are requested to try with an example.

Best Wishes,
Suju

Back to top

Display posts from previous: All Posts Oldest First Go

All times are GMT


www.sefindia.org Forum Index -> SEFI General Discussion

Page 1 of 1

Jump to: SEFI General Discussion Go


Translate topic Go
You cannot post new topics in this forum
You cannot reply to topics in this forum

https://www.sefindia.org/forum/viewtopic.php?p=15146 1/2
11/23/2017 www.sefindia.org :: View topic - Wood & armer
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum

2003, 2008 SEFINDIA, Indian Domain Registration


Publishing or acceptance of an advertisement is neither a guarantee nor endorsement of the advertiser's product or service. advertisement policy

Structural Engineering Forum of India


74,105 likes

Like Page Sign Up

Be the first of your friends to like this

https://www.sefindia.org/forum/viewtopic.php?p=15146 2/2

Você também pode gostar