Você está na página 1de 3

Datasheet v 2.

UNMANNED PLATFORMS
3W 28i / 28CS ENGINE WITH
AND SUBSYSTEMS
80W GENERATOR SYSTEM

3W 28i (or 28 CS)


engine. Pusher or
tractor engine versions
are available

Ignition unit
System Overview:
Preinstalled 80W The 3W 28i engine is supplied together with UAV Factorys proprietary 80W onboard
onboard generator generator system. The generator system is factory installed on the 3W 28i engine and
system tested before delivery.
Generator Power Unit The two-stroke 3W 28i engine is a proven choice for unmanned aircraft vehicles due to
Wiring with Fischer excellent power-to-weight ratio and reliability. The 28i engine is available in both pusher
push-pull connectors and tractor versions. It is also possible to order 3W 28 CS engine, which offers higher
installed power output.

Two level anti-vibration The 3W 28i engine and generator system is often used for unmanned aircraft vehicles with
engine mount (optional) the takeoff weight of 8 to 23 kg.

Hitec digital throttle Dimensions:


servo and linkage 75 [2,95]
(optional)
59 [2,32]

164 [6,46]
88 [3,47]

62 [2,44]
30 [1,18]
42 [1,65]

42 [1,65]

48 [1,89] 225 [8,86]

106 [4,17]

106,9 [4,21]

U AV F a c t o r y U S A L L C
59,4 [2,34]

49,4 [1,94]

34,5 [1,36]

50 South Buckhout Street


Irvington, NY 10533 USA
Phone: +1 (914) 591 3070 115,8 [4,56]

Fax: +1 (914) 591 3715


sales@uavfactory.com www.uavfactory.com
Generator System Description:
Onboard Generator system consists of a Generator
Power Unit (GPU), belt driven industrial-grade
coreless generator, mounts and wiring. System is
Generator System Key
capable of providing up to 80W maximum continuous
Features:
power to onboard electronics.
Light weight, small and GPU is designed to provide onboard dual voltage regulated power supply of 6 and 12 Volts.
efficient Despite small size, GPU offers outstanding efficiency as well as unique features such as
Up to 80 W continuous the ability to monitor load, battery current, engine rpm, generated and battery voltage. All
load power power distribution parameters are sent through serial TTL communication and can be
transmitted to the UAV ground control station.
6 V and 12 V output
Integrated Lithium Polymer charger is used for the backup battery, which is switched on
Peak load current up to during the pre-flight checks or low engine speed. GPU is packed in a sealed aluminum
10 A enclosure and fitted with the high-end industrial push-pull connectors. Wire harness is
included in the package.
Short circuit protection

Battery backup
connection
Maximum generator power output:
3 cell Li-Poly integrated
110
charger
100
External power Short term operation
90
connection 80
Continuous power, W

Integrated current 70

sensors 60
Battery
50
Serial connection operation
40
IP 64 GPU housing Continuous generator
30
operation
20
10
0
0 1000 2000 3000 4000 5000 6000 7000 8000

Engine speed, rpm

Engine Specifications:
Parameter Value
Engine model 3W 28i or 28 CS, two stroke
Power 3.35 hp (28i) or 3.55 hp (28 CS)
Capacity 28 cc
Speed range 1500-8500 rpm
Oil / Gasoline Ratio 1:50 / 2% mix
Recommended 2-bladed Propellers 16x10, 18x8, 18x10, 20x8
Recommended 3-bladed Propellers 16x8, 16x10
Engine weight (including ignition) 1.2 kg
Muffler Not included

U AV F a c t o r y U S A L L C
50 South Buckhout Street
Irvington, NY 10533 USA
Phone: +1 (914) 591 3070
Fax: +1 (914) 591 3715
sales@uavfactory.com www.uavfactory.com
Generator System Electrical Specifications:
Parameter Value
Generator type Brushed
Generator voltage range 13 50 VDC
External power supply voltage range 13 50 VDC
Battery Type 3 cells Li-Polymer (not included)
Battery Voltage 12.6 V
Maximum battery charging current 2A
Maximum continuous generator current 3.5 A
Maximum continuous battery current 8A
Maximum continuous external power current 8A
Output voltage 6 V and 12 V
Maximum output voltage ripple 50 mV @6V 50 mV@12V
1,2
Continuous load current, 6 Volt output 5A
1,2
Continuous load current, 12 Volt output 5A
Maximum GPU efficiency 90%
Maximum total generator system efficiency 75 %
Maximum peak load current 10 A for 10 seconds
No load GPU current 110 mA
Tachometer range 1000-9000 rpm
Tachometer accuracy 200 rpm
Current sensor range 0 to 10 A
Current sensor accuracy 0.2 A
Voltage sensor accuracy 0.1 V
Serial Communication 5V TTL

Generator System Mechanical Specifications:


Parameter Value
GPU Dimensions 59.4 x 115.8 x 32.4 mm
GPU Weight ~190 grams
Complete Onboard Generator System weight ~500 grams
Maximum GPU enclosure temperature 70C
Environmental protection IP 64 standard, IP 68 on request
2
Operating temperature - 40C to +50C
Electrical connectors Fischer 104 Series push-pull connector
1
Generator continuous current must not exceed 3.5 A.
2
Enclosure temperature must not exceed 70C , additional cooling may be required.

U AV F a c t o r y U S A L L C
50 South Buckhout Street
Irvington, NY 10533 USA
Phone: +1 (914) 591 3070
Fax: +1 (914) 591 3715
sales@uavfactory.com www.uavfactory.com

Você também pode gostar