Escolar Documentos
Profissional Documentos
Cultura Documentos
Geology 15-17
Reservoir 18-24
Production and Well Intervention 25-59
HSE 60-65
Information and Management 66-69
1
OGIM training courses:
OGIM provides original and applied course contents, tailored to needs of
Petroleum E&P activities.
A wide range of technical training courses for a large public, from the
manager to the operator.
An applied interactive teaching method based on a sound pedagogic
means and equipment.
Long training sessions delivered for new graduated Engineers and Tech-
nicians.
Our trainers:
More than 30 lecturers, with a strong industrial experience in their spe-
cialties.
Highly skilled and experienced in both technical and educational
spheres.
2
Public training courses:
All our courses could be organized for participants from different compa-
nies.
The companies having a limited number of trainees for such sessions ;
should communicate:
- The number of possible participants.
- The preferred dates and place of the required course.
Courses could take place in a 4-stars hotel in Monastir, in such case the
tuition fee shall include as well the lunch and two coffee breaks per day
for the trainees.
Trainees may also take advantage of our agreement with the hotel for the
accommodation and the other meals.
Based on the availability of candidates from other companies a course
would be scheduled on the following days.
3
Ref. Courses Duration Pages
Short Courses
Well construction/Drilling
BDE-E Basics of Drilling Engineering 10 days 6
FDE-E Fundamentals of Drilling Engineering 5 days 7
DHD-E Directional and Horizontal Drilling 4 days 8
DFST-E Drilling Fluids and Solid Treatment 5 days 9
CTT-E Cementing Tubular Techniques 4 days 10
CSD-E Casing String Design 3 days 11
SPP-E Stuck Pipe Prevention 3 days 12-13
WC-E Well Control 4 days 14
Geology
GPG-E Geology and Petroleum Geology 3 days 15
TPPS-E Tunisia Producing Petroleum Systems (1 day in Classroom + 5 days field trip) 6 days 16
FEUC-E Formation Evaluation Using Coring, MWD, and LWD Tools 3 days 17
Reservoir
RRFP-E Reservoir Rocks and Fluids Properties 3 days 18
PVTA-E PVT Analysis 3 days 19
RMS-E Reservoir Modeling and Simulation 5 days 20
DM-E Drive Mechanisms and EOR 3 days 21
IWTA-E Intermediate Well Testing Analysis 3 days 22
BPWT-E Basic Principles of Well Testing 3 days 23
EORW-E Enhanced Oil Recovery and Water Flooding 4 days 24
4
Ref. Courses Duration Page
Short Courses
Production and Well Intervention
CPIV-F Contrle des Procds Instrumentation et Vannes 5 days 50-51
CMP-F Corrosion : Mcanismes et Protection 4 days 52
SRP-E Sucker Rod Pumping: Operations & Troubleshooting 5 days 53-54
AP-F Activation des puits 4 days 55
WA-E Wells Activation 3 days 56
AL-E Artificial Lift 4 days 57
CD-E Capstone Design: Planning Oil & Gas Reservoirs 20 days 58-59
development from A to Z
HSE
HSE-E Basic HSE 3 days 60
PS-F Premier Secours 3 days 61
HMS-E H S E Management System for Drilling and Workover 3 days 62-63
Operation
TME-F Travail en milieux explosifs 2 days 64
AT-E ATEX Training 2 days 65
Information and Management
IOGI-E Introduction to Oil and Gas Industry 3 days 66
PFP-E Petroleum from Formation to the Final Products 3 days 67
TEP-F Dcouverte des techniques d'exploration production 5 days 68
EUP-E Economics of Upstream Project 4 days 69
Long Programmes
360 hours
DEO-E Drilling Engineering and Operations 3 weeks Project 70
600 hours and
PE-E Petroleum Engineering 2 weeks Project 71
PST-E Petroleum Senior Technician 450 hours 72
OPP-F Oprateur de Production Ptrolire 560 hours 73
OCP-EF Oprateurs de champs ptroliers 6 weeks
(180 hours) 74
5
Well Construction
Reference : BDE-E
Course Content
Who should attend
Hoisting System Rig Capacity
Field Engineer (not neces-
sarily oil profile) with little
experience in the field. Blocs and Drilling Line
Technicians Drillers and
Assistant Drillers (a few Ton per Mile Applications
years of experience) may
also participate.
Slip and Cut program
Instructor
Circulating System
Youcef MADI
Pump Rates Application
Duration
Reference : DHD-E
Course content
Reference : DFST-E
Course Content
Who should attend 1. Introduction & history
Drilling Engineers and 2. Functions of drilling & work over fluids
Technicians, Mud Engi-
neers and Technicians,
Drilling Supervisors 3. Basics chemistry
Habib AKID
8- Exercises
Mohamed Ridha Graduated Drilling and Production Engineer from the French
Petroleum Institute (IFP), more than 40 years experience in
ROUATBI Drilling and Production Technology.
10
Well Construction
Course Content
Reference : CSD-E
A- Introduction
Who should attend
1- Model Description
Well Engineers / Drilling En- 2- Program Features
gineers / Drilling Supervi-
sors, Tool Pushers, Tower B- Theory of Casing and Tubing String Design
Pushers, Senior Cementing
Supervisors 1- Design of Downhole
2- Determining Pipe Loads
Instructors 3- Determining Pipe stresses
4- Collapse Design
Mohamed Ridha ROUATBI 5- Burst Design
6- Tension Design
7- String Types
Duration 8- Harsh Environments
9- Casing Wear
3 days
1- Fast Start
2- The Menu
3- Main
4- tring Type
5- Program Design Factor
Mohamed Ridha Graduated Drilling and Production Engineer from the French
Petroleum Institute (IFP), more than 40 years experience in
ROUATBI Drilling and Production Technology.
11
Well Construction
Course Content
Reference : SPP-E A- Sticking Mechanisms
1- Packing-off first actions
2- Unconsolidated Formations
Who should attend
3- Mobile Formations
Drillers, Tool Pushers, 4- Fractured Formations
Drilling Supervisors, Well 5- Naturally Over-Pressured Shale Collapse
Engineers, Drilling
6- Induced Over-Pressured Shale Collapse
Engineers, Company
Representatives and Fishing 7- Reactive Formations.
Engineers. 8- Hole Cleaning
9- Tectonically stressed formations
Instructors 10- Differential Sticking
11- Borehole Geometry and Key Seating
Mohamed Ridha ROUATBI
12- Ledges and Doglegs
13- Junk In Hole
Duration
14- Collapsed Casing
3 days 15- Cement Blocks/Green Cement
Mohamed Ridha Graduated Drilling and Production Engineer from the French
Petroleum Institute (IFP), more than 40 years experience in
ROUATBI Drilling and Production Technology.
12
Well Construction
E- Different Techniques to release the string
Reference : SPP-E 1- Pipe Release Agents (PRA)
2- PRA Procedure
3- Acid
Who should attend
4- Diesel pills
Drillers, Tool Pushers, 5- Stretch Test Procedure
Drilling Supervisors, Well 6- Back-Offs
Engineers, Drilling
Engineers, Company
Representatives and Fishing F- Jars and Accelerators
Engineers. 1- Mechanical Jars
2- Hydro mechanical Jars
Instructors 3- Accelerators
4- Jars Positioning
Mohamed Ridha ROUATBI
Duration
3 days
Venue
Monastir
Language
English
Fees / Trainee
(Excluding VAT)
1 000 DT
Mohamed Ridha Graduated Drilling and Production Engineer from the French
Petroleum Institute (IFP), more than 40 years experience in
ROUATBI Drilling and Production Technology.
13
Well Construction
Reference : WC-E
Course Content
Reference : GPG-E
Course Content
Who should attend Geology basics: the elementary composition of the crust,
Engineers Plate tectonic, Rocks, Minerals, Sedimentary rocks, Geolog-
Managment ical time and geologic time scale
15
Geology
Course Content
Reference : TPPS-E
PETROLEUM GEOLOGY BASICS (OVERVIEW)
Who should attend
GELOGICAL PETROLEUM PROVINCES IN TUNISIA
Technical Staff in petro- 1.General structural and tectonic settings
leum Exploration 2.Lithostratigraphy
Managers 3.Different petroleum Provinces
16
Geology
Reference : FEUC-E
Course Content
(MWD)
Why we need MWD
Instructor
Introduction into MWD
Ali MURABIT
Components of MWD System
Feature of Services Companies MWD Tools
Duration
3 days
3. Formation Evaluation Using Logging While Drilling (LWD)
Technology
Venue
Introduction into Logging While Drilling
Monastir
Configuration of LWD Bottom Hole Assembly
Services Companies, LWD Tools
Language
English
4. Data Measurement / Logging While Drilling MWD/LWD
Fees / Trainee
(Excluding VAT)
1 200 DT
Reference : RRFP-E
Course Content
1- Introduction
Who should attend
- Description of reservoirs
Reservoir, Production
- Systems of Units used in the Petroleum Industry and
and Drilling Engineers on version
- Notions of Hydraulics: Physical State, Pressure, Densi-
ty and Compressibility, Viscosity, Capillary Pressure,
Instructor
Equation of Navier-Stokes.
Ammar JELASSI - Bernouilli's Equation, Applications
- Basic Notions of Rock Mechanics: Moduli and Failure
Duration
2- Rock Properties
3 days - How they are studied (cuttings, Cores, logs, in situ
Tests)
Venue - Types of Rocks with emphasis on Reservoir Rocks; ho-
mogeneity/Heterogeneity, Isotropy/Anisotropy, layering,
Monastir dip, fractures
- Porosity (Primary and Secondary), Fluid Saturation,
Language Capillary Pressure, Permeability absolute and relative,
- Mechanical Properties (Density, Moduli, Compressibi-
English
lity, Sound Velocity), electrical properties, other proper-
ties (temperature...)
Fees / Trainee
(Excluding VAT)
1 000 DT 3- Fluid Flow in Reservoir Rocks
- Reservoir Fluids characterization: Petroleum and water
- Flow Equation (monophasic with and w/o gravity forces)
- Flow Equation for a vertical well and incompressible li-
quid (steady state); well tests
- Other cases: deviated or horizontal well, gaswell, fractu-
red reservoir, injection wells
- Multiphase flow
- Modeling
NB : This training can be delivered in Frensh Language
Reference : PVTA-E
Course Content
Who should attend
Geoscientists, and petrole- 1- Review of Petroleum Reservoir Rock & Fluids Properties
um junior engineers, Pro-
duction Technician and
Operator who have limited
knowledge and experience 2- Generalities: PVT Review
with the PVT.
3 days
5- Fluids Pressure
Venue
Monastir
6- Oil Properties
Language
Reference : RMS-E
Course Content
1. Concept of Reservoir Modeling
Who should attend
Reservoir Engineers
2. Integration of data in Modeling
5. Framework Building
Duration
6. Facies and Fracture Modeling
5 days
9. Concept of Upscaling
Language
10. Exporting Results to Reservoir Simulation
English
31 years experience with international oil Companies (BP and Golf Ca-
Mohamed Salah nada) and Universities (Windsor, Ontario and UAE). Master and PhD. De-
ABOU SAYED grees in Basin Analysis and Reservoir Characterization (respectively).
Author and Co-Author of 39 papers in several bulletins and journals.
20
Reservoir
Reference : DM-E
Course Content
Who should attend
Moncef CHEKIR
4. Primary Recovery
Duration
3 days
5. Secondary Recovery
Venue
Language
7. Reserve evaluation and performance: volumetric,
English
material balance (MBA), decline curves (DCA)
Fees / Trainee
(Excluding VAT)
1 000 DT NB : This training can be delivered in Frensh Language
Reference : IWTA-E
Course Content
Who should attend
1. Review of basic rock & produced fluid properties
This course is especially
designed for junior petrole-
um engineers who have 2. Review of well performance and production data
limited knowledge and ex-
perience with well testing.
3. Well testing
Instructor What is a well test
Objectives of a well test
Moncef CHEKIR
The different types of well test
Duration Basic theory
3 days Drawdown (BB)/Build up (BU) tests
Basic analysis steps for DD & BU steps (semi-log Horner
Venue plot):
Monastir - Wellbore storage effects
- Permeability calculation (k)
Language
- Skin effect calculation (S)
English - Average static reservoir pressure (P*)
- Well Flow efficiency
Fees / Trainee
(Excluding VAT) - Limit Effects
1 000 DT
Introduction to effects of reservoir heterogeneities
Derivative Methods Analysis (Log-log plots)
Gas well testing (AOFP)
Formation Evaluation (MDT, etc.): Pressure Regimes
- Discuss attendee supplied data sets
Reference : BPWT-E
Course Content
Who should attend
1. Review of basic rock & produced fluid properties
This course is especially
designed for field opera-
tors, geoscientists, petrole- 2. Review of well performance and production data
um, drilling and production
junior engineers who have
limited knowledge and ex-
perience with well testing. 3. Well testing
What is a well test
Instructor
Objectives of a well test
Moncef CHEKIR The different types of well test
Duration Basic theory
3 days
Drawdown (BB)/Build up (BU) tests
Basic analysis steps for DD & BU steps (Horner plot):
Venue
Permeability calculation (k)
Monastir
Skin effect calculation (S)
Language Average static reservoir pressure (P*)
Technical English Well Flow efficiency
Fees / Trainee limit Effects (boundaries)
(Excluding VAT)
1 000 DT
Gas well testing (AOFP)
Formation Evaluation (MDT, etc.)
Discuss attendee supplied data sets
Instructor
5 Circulating and Killing methods
Brian McKAY
Venue
Monastir
Language
NB: For the combined certificate course, delegates now have the choice of taking
English all 3 disciplines wireline, coiled tubing and snubbing operations or taking
only 2 of the 3 disciplines. The certificate will certify the specific disciplines
taken.
Fees / Trainee
(Excluding VAT)
4 500 TD
Brian is IWCF accredited Instructor. He is an experienced Instructor who has been in the
Industry for a number of years progressing through the various stages from Assistant
Brian McKAY Wireline Operator / Completion Operator with OTIS Engineering Corporation to Wireline
Supervisor at Baker Packers then Completion Supervisor with AVA UK Limited before
becoming self employed as a Well Services Consultant for various well known Compa-
nies.
25
Production and Well
Intervention Course Content
Reference : WCS-E
1. Basic well completion design and practices
Who should attend
Language
PHT completion considerations
Chahine BAHRI
Well Inflow Performance
Duration
Productivity Impairment
3 days
Gas Well Deliverability
Venue
Monastir
Well Outflow Performance
Language
Systems (NODAL) Analysis
Fees / Trainee
(Excluding VAT) NB : This training can be delivered in Frensh Language
1 000 DT
3 days
Monastir
Language
English
Fees / Trainee
(Excluding VAT)
1 200 DT
Language
NB : This training can be delivered in Frensh Language
English
Fees / Trainee
(Excluding VAT)
1 200 DT
-Production Engineers,
technicians and Operators 2. Pipelines:
with long Experience.
-Pipelines and Terminals Specifications, types, construction, operating condi-
Engineers, Supervisors
and Technicians tions
Risks, damages and defects,
Instructor
Protection: internal and external coating, inhibition,
Mokhtar AYEB
treatment, cathodic protection,
Duration
4 days
3. Pipeline pigging:
Venue Pig types
Monastir Pig traps
English
4. Pipeline inspection and repair
Fees / Trainee
(Excluding VAT) Inline inspection
1 200 DT
Risk management
Defects repair
Fees / Trainee
(Excluding VAT) 9. Gas transport and storage
1 200 DT
32
Production and Well
Intervention
Programme de formation
Reference : STHGE-F
Objectifs des traitements sur champs et installations de
A qui s'adresse cette
production:
formation:
Oprateurs des installations
- Constituants des fluides ptroliers
et champs ptroliers: - Constituants posant des problmes au producteur
Mohamed Lassaad Degree in Process Engineering (ENI - Gabes) and Master in Pro-
ISSAOUI ject Management (HEC - Montreal)
33
Production and Well Course Content
Intervention
Reference : SPF-E
Mokhtar AYEB
Mokhtar AYEB
6. Remonte de la garniture de production
Venue
8. Reliability and availability improvement
Monastir
Language
English/French
Fees / Trainee
(Excluding VAT)
1 200 TND
37
Production and Well
Intervention
Programme
Ref: EMMT - F
Oprateurs et techniciens de
production, 2. Les moteurs gaz
Mcaniciens, lectriciens
et instrumentistes
3. Les compresseurs alternatifs
Instructeur
Taoufik HADJALI
4. Les turbines gaz
Dure
Prix / participant
(Hors TVA)
6. Les pompes centrifuges
1 400 D T
Lieu de formation
8. Les compresseurs vis
TPI -Tataouine
Immeuble Akoui - 2 me tage Rue Fadhel
Ben Achour - 3200 Tataouine
38
Production and Well
Intervention Course Content
Reference : ITC-F
1. Introduction au contrle commande dans les installations
industrielles (Cas des installations ptrolires)
A qui sadresse cette
formation ? 2. Systmes automatiss (Dfinitions, Domaines dapplication et
-Ingnieurs et Techniciens
de production sur les in- principes de fonctionnement)
stallations ptrolires.
-Ingnieurs nouvellement
recruts concerns par le 3. Les outils de contrles et de surveillance:
contrle de Process, la r- - Linstrumentation de mesure
gulation et linstrumenta-
tion. - Les automates programmables et SNCC
- Les rseaux de communication industriels (rseaux de ter-
Instructeur rains)
- Linterface Homme/Machine pour la surveillance et la su-
Noureddine KANDI
pervision des installations
5 jours
5. Rgulation de procds :
- Dfinitions
Lieu
- Les principaux paramtres rguler dans une installation
Monastir Ptrolire ou gazire
- Principe de fonctionnement dune boucle de rgulation
Langue - Composantes dune boucle de rgulation
- Rgulateur PID.
Franais
Prix / participant
6. Introduction aux systmes DCS et SCADA dans les installa-
(Hors TVA) tions ptrolires (Dfinition et architectures).
1600 DT
Dure 4. Programmation
4.1. Outils et dmarches de Programmation.
4 jours
4.2. Mthodes de structuration dun programme.
4.3. Normalisation des Langages: Norme IEC 611131-3
4.4. Mthodes dadressage et format des variables ( En-
Lieu
tres, Sorties, Variables internes)
OGIM - Monastir (Tunisie) 4.5. Structuration dun Programme.
4.6. Programmation des automatismes logiques dans les
diffrents langages: Ladder (cont), SFC (Grafcet), les
Langue Blocs, Liste dInstruction.
4.7. Programmations des oprations numriques.
Franais
4.8. Traitement des valeurs analogiques.
Reference : II-F
Chapitre 1: Le Contrle des procd
Who should attend
Instrumentation and
Chapitre 2: Les instruments de mesure de la pression et de la
Mechanical Technicians
temperature
Instructors
Chapitre 3: Les instruments de mesure de niveau et de debit
Fawzi BEN SALAH
Chapitre 4: Les lments finaux de la boucles ( les actionneurs),
NB : Cette formation peut etre faite en intra enterprise sur site de production.
Linstructeur assure en plus des cours en sale, des sances de coaching di-
rectement sur les installations de production.
Reference : PI-E
Duration
Section 4: Final Control Element , Control Valves
5 days
Language
Section 6: P&ID, C&E Matrix, ESD System
English
Reference : IIPC-F This course covers Fundamentals of Instrumentation and Process Control
highlights Sensors, transducers, and Smart Transmitters; Temperature, Pres-
Who should attend sure, Level and Flow Measurement.
Control Valves, on-off valves, pressure safety valves and special valves are
- Production Engineers treated.
and Technicians This course explores the critical relationship between instrumentation and
distributed control systems ( DCS)
- Operators with long expe-
rience.
- Maintenance Technicians
Course Content
Instructors
Process loop introduction
Walid HAMIDA
Typical application : three-phase separator
Mohamed BENREKHISSA
Basis for PID, Guideline in selecting PID structure, Action
Duration
Introduction to loop dynamics, tuning and control
4 days Control strategy documentation, Flow Sheet, P&ID, Loop Sheet
Reference : IIPC-F The process control workstation and DeltaV DCS is used to give the oppor-
tunity to students to apply in practice the theory they have learnt
- Production Engineers
and Technicians
- Maintenance Technicians
Instructor
Walid HAMIDA
Mohamed BENREKHISSA
Duration
4 days
Venue
Tunis
Language
Fees / Trainee
(Excluding VAT)
1 200 DT
45
Production and Well
Intervention Didactic and cutaway equipments
- Production Engineers
and Technicians
- Maintenance Technicians
Instructor
Walid HAMIDA
Mohamed BENREKHISSA
Duration
4 days
Venue
Tunis
Language
Fees / Trainee
(Excluding VAT)
1 200 DT
46
Production and Well
Overview
Intervention
Reference : CVM-F This 4 days course explains how valves and actuators function and how they
are installed and calibrated. It emphasizes installation, troubleshooting, parts
replacement, and calibration of control valves, actuators, positioners and
Who should attend
digital valve controllers. Students spend over 50% of their time in hands-on
workshops.
- Instrumentation and
Mechanical Technicians Course Content
Major Loop Components and Their Functions
47
Production and Well Practical exercices
Intervention
-1- valve body/ actuator disassembly: Fisher 2 ED 667/40
Reference : CVM-F
- Instrumentation and
Mechanical Technicians
Instructor
Walid HAMIDA
-2- Trim inspection and replacement: Fisher EZ 1
Morched BOUHLEL
Duration
4 days
Venue
Tunis
Language
Fees / Trainee
(Excluding VAT)
1 350 DT
48
Production and Well -4- Actuator Bensh set :
Intervention
Reference : CVM-F
- Instrumentation and
Mechanical Technicians
Instructor
Walid HAMIDA
-5- Positioner installation and configurationhart communicator :
Morched BOUHLEL
Fisher DVC6000
Duration
4 days
Venue
Tunis
Language
Fees / Trainee
(Excluding VAT)
1 350 DT
49
Course Content (1/2)
Production and Well
Intervention I- Rappel du Contrle de procd
Constituant dune boucle de rgulation
Boucle pneumatique / boucle 4-20 mA
Reference : CPIV-F
Exemple de rgulation : sparateur tri phasique
Normes, Abrviations et symboles
Lecture des plans P & ID
Architecture dune installation avec SNCC ( DCS)
A qui s'adresse cette
formation: II- Capteurs et Transmetteurs :
Mesure de temprature
Oprateurs de production, Diffrents type de capteurs, principe de fonctionnements et contraintes
gaz, injection d'eau, process physiques
et traitements Contraintes dinstallations
Mesure de pression
Diffrents type de capteurs, principe de fonctionnements et contraintes
Mcaniciens, lectriciens, physiques
instrumentistes Contraintes dinstallations
Mesure de niveau
Diffrents type de capteurs, principe de fonctionnements et contraintes
physiques
Contraintes dinstallations
Mesure de dbit
Instructors Diffrents type de capteurs, principe de fonctionnements et contraintes
physiques
Contraintes dinstallations
Walid HMIDA
Rgimes dcoulement des fluides
Connexion lectrique te communication des transmetteurs
Mohamed BEN RKHISSA
Instrument 2 fils HART
50
Production and Well
Intervention Course Content (2/2)
Reference : CPIV-F V- Vannes manuelles et vannes motorises (TOR)
Vanne Globe
Vanne gate
Vanne tournant sphrique : boule flottante et arbr ( trunion)
Clapet anti retour check
A qui s'adresse cette Vanne papillon
Vanne plug
formation:
Vannes motoriss : SDV, BD
Oprateurs de production, VI- Travaux pratiques
gaz, injection d'eau, process 1- Capteurs et Transmetteurs :
et traitements Connexion lectrique et communication HART : transmetteur de tempra-
ture, pression, niveau et dbit (vortex, lectromagntique, plaque orifice et
Coriolis)
Mcaniciens, lectriciens,
instrumentistes
Instructeurs
2- Vannes de rgulation :
Walid HMIDA Inspections des internes et des diffrents composants
Mohamed BEN RKHISSA
Dure
5 jours
Lieu de la formation
3- contrle de procd et SNCC
Monastir & Tunis La maquette didactique permet dtudier trois boucle de rgulation ; pression,
niveau et dbit ainsi quune fonction de scurit shut down
Langue
Prix / participant
(Hors TVA)
1 750 DT
51
Production and Well
Intervention Course Content
Reference : CMP-F
Instructeur
Dure
4 Jours
Lieu
Monastir
Langue
Franais
Fees / Trainee
(Excluding VAT)
1200 DT
52
Production and Well
Course Content
Intervention
I - General Overview
Reference : SRP-E
Artificial lift theory and application
Who should attend
Artificial lift market
This course is designed for Pro- Artificial lift systems selection criteria
duction engineers and operations Beams pump system completion design
staff responsible for designing lift
installations and performing sur-
veillance and optimization on II Rod pumping system components
wells using lift techniques.
Pumping units
A minimum of 2 years production
engineering experience is sug- Sucker rods
gested. Subsurface pumps
Venue
Monastir
Language NB: This training can be organized for a single company on production
English (as official language, in French site. The instructor provides in addition to classroom lectures, coaching
& Arabic as secondary language)
sessions directly on the production facilities.
Fees / Trainee
(Excluding VAT)
( 2 Coffee breaks and lunch included )
2 000 DT
English
Fees / Trainee
(Excluding VAT)
1 000 DT
56
Production and Well
Intervention Course Content
Reference : AL-E
Instructor
3- Artificial lift: principles, technology, downhole and surface
equipment, applications, advantages and disadvantages of
Mokhtar AYEB each system:
Fees / Trainee
- Gaslift
(Excluding VAT)
1 200 DT
Reference : CD-E In this course, trainees are prepared for engineering practice through curricu-
lum culminating in a major design experience based on the knowledge and
skills acquired in earlier course work and incorporating engineering stand-
Who should attend
ards and realistic constraints that include most of the following considera-
Drilling, Production tions: (1) economic; (2) environmental; (3) sustainability; (4) manufactura-
& Reservoir Engineers. bility; (5) ethical; (6) health and safety; (7) and social.
Duration
DA 1 & 2:
20 Days ( 4 Weeks) For oil and gas case studies;
Analyze geological data.
Construct geological maps/cross-sections/views, etc.
Identify hydrocarbon trap(s).
Venue
DA 5 & 6:
For same oil and gas case studies;
Fees / Trainee Design completion programs.
(Excluding VAT) Design stimulation programs (if needed).
9500 TND Design well testing programs.
Reference : HSE-E
Course Content
60
H.S.E.
Course Content
Reference : PS - F
Monastir ou sur site 11/ Les plaies (Simples et Graves) ; Les emballages respectives
Language 12/ Les fractures, les polytraumatiss, les luxations et les en-
French
torses,
Fees / Trainee
13/ Fracture du rachis et comment utiliser un matelas coquille,
(Excluding VAT)
1 000 DT 14/ Les piqres de scorpion et les morsures de vipre,
15/ Les insolations et les coups de chaleur,
16/ Les positions dattente,
17/ Oxygnothrapie
18/ Les techniques de ramassage et de brancardage,
19/ Rvision avec mise en situation daccident + Evaluation
Mdecin traitant, le Docteur Anis GUETTARI assure depuis 2003 la formation, la
gestion des risques, les audits et laccompagnement pour la mise en place de sys-
Mohamed Anis tmes de scurit en enterprises. En plus de son diplme de doctorat dtat en mde-
cine en 1998, il a bnfici en 2000 dune formation en contrle des incidents et
GUETARI lexctiction des feux avec les sapeurs pompiers de France et de plusieurs stages :
survie en mer (2007), conduite dfensive (2009), HSE (2009). En 2014, il obtient le
Mastre professionnel en Ergonomie de la facult des sciences de Tunis.
61
HSE
Course Content (1/2)
Reference : HMS-E
Mohamed Ridha Graduated Drilling and Production Engineer from the French
Petroleum Institute (IFP), more than 40 years experience in
ROUATBI Drilling and Production Technology.
62
HSE
Course Content (2/2)
Reference : HMS-E 6. Rig Components Potential Hazards.
6.1 BOP (RP 53)
9 Management System
9.1 Responsibility
9.2 Organogram
Mohamed Ridha Graduated Drilling and Production Engineer from the French
Petroleum Institute (IFP), more than 40 years experience in
ROUATBI Drilling and Production Technology.
63
Travail en Milieux
Explosifs
Instructor
3. Zone atmosphre explosible et Classification des zones (zone 0, 1 et 2).
Fawzi BEN SALAH a. Dfinitions : Zone 0, Zone 1 et Zone 2.
b. Directive ATEX (CompEx).
c. Procdures de travail dans les zones classes.
Duration
Tunis
4. Exercices pratiques: Audit ATEX sur site.
Language
5. Test de connaissances.
French
800 DT
64
Travail en Milieux
Explosifs
Who should attend 1. Induction and awareness regarding severity of explosion and fire
Maintenance and operation
Technicians (especially accidents
electrical and Instrument
technician) and every per-
2. How explosion and fire accidents happen?
son who needs to have in- a. Fire triangle
formation about Hazard-
ous and classified areas. b. Ignorance or failure to implement HSE Standards /
Procedures ( PTW, JSA, RA, LOTO)
c. Apparatus and equipment not compliant with the area.
Instructor 3. Hazardous Area and Zone classification (Zone 0, 1 et 2).
a. Definitions : Zone 0, Zone 1 and Zone 2.
Fawzi BEN SALAH
b. ATEX (CompEx) Directive.
c. Work procedure in ATEX Area.
4. Apparatus and equipments selection and specification for ATEX
Duration
Area.
2 days 5. Maintenance and inspection of electrical apparatus in potentially
explosive atmospheres.
Venue 6. Exercise: Site ATEX Audit.
7. Assessment Test.
Tunis
Language
English
800 DT
65
Information Course Content
and Management
1. Introduction
Reference : IOGI-E - What is petroleum ?
INGENIERIE DE RESERVOIR/GISEMENT
Instructor - Modlisation
- Calcul des rserves (simple)
Alain BOURGEOIS
FORAGE ET COMPLETION
- Forage ptrolier (dvi, horizontal)
- Compltion dun puits
Duration - Production de fond
- Tte de puits, index de productivit
5 days
LA PRODUCTION
- Installations de surface
Venue - Exploitation (Production de surface)
- Cas de loffshore
Monastir
AVENIR DU PETROLE
- Historique (bref)
Language - Situation actuelle /Rserves/Dfis technologiques et environnementaux
- Le ptrole du futur :
French * Huiles lourdes /extra-lourdes
* Offshore trs profond/Zones nouvelles
* Ptrole et Gaz de schiste
Fees / Trainee
(Excluding VAT)
STATISTIQUES PETROLIERES
1 600 DT
Mokhtar AYEB Graduated Petroleum and Drilling Engineer from IFP, 40 years experience in drilling
and production technology ( field, office and training)
-
Engineer Degree from Algerian Petroleum Institute (API), long experience in dril-
Youcef MADI ling and teaching (Sonatrach, Boumerdes IAP)
70
For Students
And for Companies
Course Content
Reference : PE-E
Module Duration
(hours)
Duration
600 hours + visits
6. SAFETY ECONOMICS AND MANAGEMENT 40
+ 2 Weeks Project
7. Mini-Project 2 Weeks
Venue
English
Total : 600 hours
Fees / Trainee + 7 days visits
- Non-Sponsored: 9 800 DT
+ Geological field trip
- Sponsored: 15 800 DT
(Excluding VAT) + 2 weeks Project
(For 10 trainees minimum)
Graduated Engineer in Reservoir from the Algerian Petroleum Institute, 30 years experience in
Moncef CHEKIR reservoir Engineering and training in Oil and Gas fields.
-
Graduated Petroleum and Drilling Engineer from IFP, 40 years experience in drilling
Mokhtar AYEB and production technology ( field, office and training)
Graduated Engineer from Paris Polytechnic School, and Mines Paris Tech, expert in oilfield-
Ammar JELASSI reservoir engineering and senior economist.
71
For Students
And for Companies Course Content
Reference : PST-E
Technician Bac+2
Duration
(hours)
Specialities accepted by
the scientific committee 1. INTRODUCTION AND FUNDAMENTALS 110
Coordinators
3. WELL COMPLETION AND OPERATIONS 84
Mokhtar A EB - Nejib JMOUR
4. SURFACE PRODUCTION FACILITIES AND OPERATIONS 94
Venue
5. ROTATING MACHINERIES: TECHNOLOGIES AND OPERATING 48
450 hours, 4 days for visits
Venue
Mokhtar AYEB Graduated Petroleum and Drilling Engineer from IFP, 40 years experience in
drilling and production technology ( field, office and training).
- -
Nejib JMOUR IFP Engineer, former SEREPT Engineer with a large experience in Petroleum
Production Operations particularly in Onshore and Offshore fields.
72
Rfrence : OPP - F Programme de la formation
A qui sadresse cette
formation : A- Anglais gnral basique 150 heures
B Formation Technique 310 heures
Oprateurs, Aides oprateurs,
Techniciens (Mcaniciens, - Introduction lindustrie ptrolire
Instrumentistes). - Les fondamentaux de physique applique
- Les fondamentaux de chimie applique
Niveau initial : Baccalaurat
ou plus avec ou sans
- Les fondamentaux des oprations de forage
exprience. - Notions de gisement ptrolier
- Compltion des puits
Coordination :
- Activation des puits
Mokhtar A EB
- Les oprations sur puits
Dure: - Sparation et traitement huile, gaz et eau
560 heures - Les fondamentaux de la rgulation et de linstrumentation
+ visites (2 jours)
- Contrle des procds, instrumentation et vannes
- Auxiliaires de production et Utilits
Langue : - Corrosion
Franais - Anglais technique - Electricit
- Exploitation et maintenance des machines tournantes
Lieu de la formation :
- Les oprations de base en production
Monastir - Cycle de vie dun champ ptrolier
- Hygine, scurit et environnement
Prix / Participant
C- Mise niveau de langue fran aise 60 heures
Langue : 5,800 Dt/Heure D- Anglais technique 40 heures
Ptrole :
- Non-Sponsoris : 6 150 DT E- Visites
- Sponsoris : 10 500 DT F- Examens
(Hors TVA)
10 participants au minimum Total 560 heures + visites (2 jours)
Coordinateur : Ingnieur diplm de lInstitut Fran ais du Ptrole, Mokhtar A EB a occup pendant plus
de 35 ans divers postes en Production, en Forage et en Management dinstallations ptro-
Mokhtar AYEB lires. Depuis 5 ans, il donne des cours OGIM et y assure la supervision pdagogique des
modules de Production, de Forage et Compltion ainsi que la formation dOprateurs.
73
Long Courses
For Companies Le programme de formation
Reference : OCP-EF
1re semaine :
Who should attend - Introduction l'industrie ptrolire 1 jour
- Les fondamentaux de physique et de chimie - le PVT 2 jours
- Forage et compltion des puits 2 jours
Production Operators
(Gas, Process and
Treatments, Water Injec- 2me semaine :
tion ...) - Les gisements ptroliers 1 jour
- Les diagraphies de production (PLT, etc.) 1 jour
Wireline and Well Inter- - L'activation des puits 1 jour
vention Operators
- Les travaux sur puits (Wireline, Stimulation,
Petroleum Technicians Coil Tubing, Workover) 2 jours
(Instrumentation, Electrici-
3me semaine :
- Scurit et contrle des puits 2 jours
Coordinator - Sparation et traitement huile-gaz-eau 3 jours
5me semaine :
Venue - Systmes de piping, utilits, comptage et stockage 2 jours
- Traitement et injection d'eau 1 jour
Tataouine - Machines tournantes 2 jours
6me semaine :
Language - Conduite des oprations sur les chantiers 1 jour
- HSE 2 jours
French/English - Rvision gnrale et examens de rattrapage 2 jours
74
1- Enrolment
1.1 All inscriptions to training sessions shall be carried out 3 weeks prior to
the session start date.
1.2 The number of participants per session is limited usually to minimum 10
trainees and maximum 16 trainees.
1.3 Enrolment will be confirmed once we receive an official request via
email, Fax or mail.
2- Service order
2.1 If requested by the Company, a pro-forma invoice will be issued by
OGIM to establish their service or purchase order.
2.2 The service or purchase order shall be received at least one week before
the course starting date.
3. Invitation of participants
3.1 Personal invitation for the Participant shall be issued by the company.
3.2 It provides all practical information on the session (schedule, directions,
etc.) and any other useful specifications.
4. Price
4.1 The given Enrolment Fees are per trainee and per session, VAT excluded.
4.2 These Fees cover : teaching, practical activities, documentation and exams
when required.
4.3 For public courses and exclusive courses, enrolment fees cover as well
two coffee-breaks per day and lunch.
4.4 They do not include transport or accommodation.
4.5 The prices are given in Tunisian Dinar excluding tax.
4.6 All training sessions once started are to be paid in full.
4.7 The prices given for long term courses are those applied to companies and
candidates sponsored. Non Sponsored candidates can benefit from special
rates.
75
5. Invoicing and payment
5.1 The invoice is sent to the Customer at the end of the training session.
5.2 Payment is due within the 30 calendar days following the receipt of the
invoice, either by check or via bank transfer.
7. Insurance - responsibility
7.1 The Customer will take out and maintain all insurance policies at his own
cost and for the entire duration of the session, for covering risks, respon-
sibilities, direct or indirect damage and any illness contracted by the Par-
ticipant(s), with prime insurance companies.
7.2 Each Party remains liable for damages made to its property and for per-
sonal injuries suffered by its employees, regardless of the cause or the
reason of that damage, during the performance of the training session,
except gross negligence or willful misconduct by this aforementioned
Party, or one of its employees.
7.3 In any case, OGIM shall not be liable for any indirect or consequential
loss such as but not limited to financial, commercial or any other
type of prejudice, caused directly or indirectly by the use of the infor-
mation broadcast within the framework of its training sessions.
76
They trust us for training
77
TPI
OGIM
Immeuble Akoui - 2 me tage Rue Fadhel
Avenue Ibn El Jazzar - Skans - 5000 Monastir
Ben Achour - 3200 Tataouine
Tel : +216 73 908 966 - Fax +216 73 908 765
Tel/ Fax : +216 75 854 300
Email : contact@ogim.tn
Email : contact@tpi.tn
Website : www.ogim.tn
Website : www.tpi.tn