Escolar Documentos
Profissional Documentos
Cultura Documentos
PCA
Section Sheet no./rev.
1
Calc. by Date Chk'd by Date App'd by Date
B 12/1/2017
W 16x26
20.0 kips
6 4.3"
2800.0 kip_in
10.0 kips
4.42 ksi
4.3"
102.3 kips
22.25"
2.88"
2.88"
PCA
Section Sheet no./rev.
2
Calc. by Date Chk'd by Date App'd by Date
B 12/1/2017
Check eccentricity
Maximum bearing stress; fp,max = 0.85 f'c c min((A2 / A1), 2) = 4.42 ksi
Maximum bearing pressure; qmax = fp,max B = 150.28 kips/in
Critical eccentricity; ecrit = N / 2 - Pu / (2 qmax) = 13.933 in
e > ecrit so loads cannot be resisted by bearing alone. Therefore consider as a large moment
Plate dimensions adequate as (f + N/2)2 >= (2 Pu (e + f))/qmax and a real solution for bearing length exists
Bearing length - quadratic solution 1; Y1 = (f + N/2) + ((f + N/2)2 - (2 Pu (e + f))/qmax) = 49.436 in
Bearing length - quadratic solution 2; Y2 = (f + N/2) - ((f + N/2)2 - (2 Pu (e + f))/qmax) = 0.814 in
Bearing length; Y = min(Y1, Y2) = 0.814 in
Tension force in bolts; Tu = qmax Y - Pu = 102.3 kips
Max tension in single bolt; Trod = Tu / (Nbolt/2) = 14.6 kips
Base plate yielding limit at bearing interface
Required plate thickness; tp,req = ((4 fp,max Y (l - Y/2))/(b Fy)) = 2.528 in
PASS - Thickness of plate exceeds required thickness
Base plate yielding limit at tension interface
Distance from bolt CL to plate bending lines; x = abs(m - e1) = 3.668 in
Plate thickness required; tp,req = 2.11 ((Tu x)/(B Fy)) = 1.168 in
PASS - Thickness of plate exceeds required thickness
Frictional shear resistance
Steel / concrete friction coefficient; = 0.4
Frictional shear resistance; Vn = min(v qmax Y, v 0.2 f'c Y B, v 800psi Y B) =
16.60 kips
Project Job Ref.
PCA
Section Sheet no./rev.
3
Calc. by Date Chk'd by Date App'd by Date
B 12/1/2017
PCA
Section Sheet no./rev.
4
Calc. by Date Chk'd by Date App'd by Date
B 12/1/2017
102.28 kips
6 4.3"
1' 8 .5"
1 ' 11 .3 "
2'
The anchors are located at less than 1.5hef from 3 edges. Therefore the effective embedded depth has to be limited to
16.58" in accordance with D.5.2.3
Limiting embedded depth; hef,lim = 16.58 in
Coeff for basic breakout strength in tension; kc = 24
Breakout strength for single anchor in tension; Nb = 16 a (f'c 1 psi) hef,lim5/3 1 in1/3 = 109.13 kips
Projected area for groups of anchors; ANc = 3582 in2
Projected area of a single anchor; ANco = 9 hef,lim2 = 2475.1 in2
Min dist center of anchor to edge of concrete; ca,min = 23.25 in
Mod factor for groups loaded eccentrically; ec,N = min(1 / (1 + ((2 e'N) / (3 hef,lim))), 1) = 1.000
Modification factor for edge effects; ed,N = 0.7 + 0.3 (ca,min / (1.5 hef,lim)) = 0.980
Modification factor for no cracking at service loads; c,N = 1.250
Modification factor for uncracked concrete; cp,N = 1.000
Nominal concrete breakout strength; Ncbg = ANc / ANco ed,N c,N cp,N Nb = 193.55 kips
Concrete breakout strength; Ncbg = t,c Ncbg = 125.81 kips
PASS - Breakout strength exceeds tension in bolts
Pullout strength (D.5.3)
Net bearing area of the head of anchor; Abrg = 1.5 in2
Mod factor for no cracking at service loads; c,P = 1.400
Pullout strength for single anchor; Np = 8 Abrg f'c = 48.00 kips
Project Job Ref.
PCA
Section Sheet no./rev.
5
Calc. by Date Chk'd by Date App'd by Date
B 12/1/2017