Escolar Documentos
Profissional Documentos
Cultura Documentos
----------------------------------------
------------------------------------
Change Log
MPLS Lab 1, ospf config fixed.. lo1 were accidentally added, r3 lo0 was missing
The 15.2-4(M8) seems unstable in multicast labs, so continue using the S series for
all the labs EXCEPT for DMVPN Redirect related ones.
Minor fixes to DMVPN labs
Moar fixes to MPLS and BGP Advanced Workbook labs
Fixed some DMVPN labs to use 15.2-4(M8) image. The ip nhrp redirect command
doesn't work in the S series.
DMVPN labs converted to 7200 - note the original ips of 192.1.X.X has changed to
192.1.1.X
Adv Multicast touchup fixes.
Adv OSPF labs 1-6 converted to 7200 router
Adv OSPF Lab 2 needs some more work to be completed, but you can do about 70% of
the tasks
TODO - There are still a few labs that need to be converted from the 3725 to 7200
routers
August 3, 2015
Adv Multicast Lab 5, fixes to R2 and R5 configs. They were missing some commands.
August 2, 2015
Fixes and improvements to Adv Multicast. Some topos were missing ip addresses.
Every multicast lab now has an option for completed igp and sparse or sparse-dense
mode (depending on the lab) Amazingly all multicast labs seem to work well (unlike
2-3 years ago when GNS3 would bomb out with Multicast)
July 4, 2015
Lots of fixes
June 3, 2015
April 16, 2015 *** This is a best effort project and I have not fully validated the
workbook against these configs, however, I believe this conversion should work for
most of the workbook. ****
Notes
1. Most of Foundation doesn't have initial configs because Narbik wants you to
type everything... however, for certain labs we've added an option to have all ips
configured
2. Interface numbers may be different than the workbook (especially on the large
labs).... adjust your configuration/verification accordingly.
3. Images used