Escolar Documentos
Profissional Documentos
Cultura Documentos
manufactured for boxes and small cabinets. This line is a staple of Brussos offerings.
BUTT HINGES These simple and precision machined hinges are basic butt hinges without any stop,
allowing for a full range of motion. The hinge is sold in pairs. Availible in brass or
stainless, with or without ball finials. Installation templates are available.
LH-201
in (mm)
SIDE RAIL HINGES with the L-shaped leaf cut out and solid link that provides an aesthetic highlight
and ensures the lid has a built in 95 degree stop.
HD-680 LIFT
SR-680 SR-638 SR-301
HD-638
The side rail hinge is a newer product offering from Brusso Hardware that is directly the result of cus-
tomer feedback. This is offered as an alternative to our quadrant hinges offering similar 95 degree stop
functionality but with a simpler, more elegant design. This simpler design isnt just for looks. The straight
line configuration
SR-680 means that installing a side rail hinge is considerably simpler and more efficient. in (mm)
Quadrant HD-680 Each leaf measures 1-1/2" x 1-3/4" (38 x 44) TJ-680
& Side Rail SR-638 The leaf measures 5/16" (8) wide x 1-3/8" (35) long TJ-SR638
Hinges
SR-680 The leaf measures 1/2" (13) wide x 2" (51) long TJ-SR680
SR-301 The leaf measures 5/16" (8) wide x 1-3/8" (35) long.
TJ-SR638
Note: This model has no built in stop.
The following JB brass square knuckled full mortise butt hinge is engineered with a
STOP HINGES built-in stop that allows a lid to remain open at 95 degrees. It is milled from heavy brass
stock and can be used when an additional stay is not desired.
in (mm)
Offset L-37 The leaf measures 1-3/4" x 3/8" x 1/8". (44 x 10 x 3) TJ-L37
Pivot L-39 The leaf measures 1-3/4" x 3/8" x 1/8". Offset pivot L-39 has a longer knuckle for wide throw
Hinges conditions. (44 x 10 x 3)
L-87 The leaf measures 2" x 1/2" x 3/16". (51 x 13 x 5)
L-93 The leaf measures 2-1/2" x 5/8" x 1/4". (64 x 16 x 6)
L-97 The leaf measures 3-1/4" x 3/4" x 5/16". (83 x 19 x 8)
CENTER PIVOT
HINGES
Similar in style and
construction to our L-series
offset pivot hinges, Brussos
ST center pivot hinges are
overlayed into the top and
bottom of the door and
frame; only the pivot is
visible.
in (mm)
PULLS & KNOBS that Brusso customers have come to expect. Our high quality finishes and unique
designs mean that Brusso products find themselves in a wide variety of box,
cabinet, and furniture projects.
in (mm)
Pulls& CK-204 Measures 1-1/4" (32) in diameter and projects 1-1/4" (32) 1
Knobs CK-205 Measures 1-1/4" (32) in diameter and projects 1-1/4" (32) 1
CP-125 Measures 1-1/4 (32) in diameter 1
CP-150 Measures 1-1/2 (38) in diameter 1
CP-175 Measures 1-3/4 (44) in diameter 1
CP-200 Measures 2 (51) in diameter 1
DP-101 Measures 3 (76) overall and projects 11/16 (17) 1
MC-422 Measures 5/16" (8) in diameter and projects 5/16" (8). The mounting dowel is 3/16" (5) in diameter 1
MC-428 Measures 3/8" (10) in diameter and projects 7/16" (11). The mounting dowel is 3/16" (5) in diameter. 1
MC-432 Measures 1/2" (13) in diameter and projects 9/16" (14). The mounting dowel is 5/16" (8) in diameter. 1
MC-434 Measures 5/8" (8) in diameter and projects 11/16" (17). The mounting dowel is 3/8" (10) in diameter. 1
BRUSSO 05
HARDWARE The JB-828 and JB-818 brass latches are mortised into the lid and front of a box or
case up to the edge of the cove molding. The spring-loaded pivoting bar releases
the latch when the button is pressed.
JB-818/828
in (mm)
HD-702 JB-423
JB-426 JB-755
in (mm)
RCC-1 JB-250