Escolar Documentos
Profissional Documentos
Cultura Documentos
Multimeters 18
Clampmeters 20
Megger
Electrical
Test Instruments
Catalog
Valley Forge Corporate Center
2621 Van Buren Avenue TOLL FREE
Norristown, PA 19403-2329 USA
Phone: 866-254-0962
CUSTOMER SERVICE NUMBER
Phone: 610-676-8500
1-866-254-0962
WWW.MEGGER.COM/US
Fax: 610-676-8610
WWW.MEGGER.COM/US
Contact us regarding questions,
customer service and product repairs
The word Megger is a registered trademark
MEG-749/17.15M/2.2009
TABLE OF CONTENTS
5/10-kV Insulation Resistance Testers Substation Test Equipment
MIT510/2, MIT520/2, MIT1020/2 . . . . . . . . . . . . . . . . . . . . . . .2 Transformer Turns Ratio Test Sets . . . . . . . . . . . . . . . . . . . .21
Lead Sets and Test Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Single-phase Hand-crank TTR . . . . . . . . . . . . . . . . . . . . . . . .22
Oil Test Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
1-kV Insulation Resistance Testers
MIT400 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Digital Low Resistance Ohmmeters
MIT300 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 General Purpose, DLRO-10/10X, DLRO200 . . . . . . . . . . . . .23
MIT200 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Test Leads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Major Meggers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Battery Test Equipment
Midget Megger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
BITE 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
5-kV and Greater Insulation Resistance Testers BITE 2/2P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
MIT30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Time Domain Reflectometers
MJ15 and BM15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
TDR900, TDR500, CFL510F, CFL535F, CFL535P . . . . . . . . . . .28
DC Dielectrics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Megohmmeters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Special Maintenance Equipment
Ground Resistance Testers Electrical Appliance Testers . . . . . . . . . . . . . . . . . . . . . . . . .30
Cable Locators and Route Tracers . . . . . . . . . . . . . . . . . . . .31
DET3 and DET4T2 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
DETEX Voltage Detectors and Phasing Testers . . . . . . . . .32
DET10C and 20C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Leak and Corona Detectors . . . . . . . . . . . . . . . . . . . . . . . . .33
DET2/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Coating Thickness Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . .33
AC Loop Impedance Testers Three Phase Sequence Equipment . . . . . . . . . . . . . . . . . . . .34
LT300 High Current Loop Testers . . . . . . . . . . . . . . . . . . . . .17 Test and Measurement Software
Multimeters PowerDB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
M7000/M8000 Series and AVO300 . . . . . . . . . . . . . . . . . . .18 Cross Reference Guide
Clampmeters Catalog number index . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
MMC850 Multi-conductor AC Digital Clampmeter . . . . . . .20
DCM Series Clampmeters . . . . . . . . . . . . . . . . . . . . . . . . . . .20
DCM300E Leakage Clampmeter . . . . . . . . . . . . . . . . . . . . . .20
Use this handy cross-reference guide to determine the most appropriate products for your targeted markets.
Products
Insulation Testers Ground Multimeters TTRs DLROs Battery TDRs
5/10 kVs 1 kVs Testers Testers
Pages 2-5 Pages 6-10 Pages 12-17 Pages 18-19 Pages 21-22 Pages 23-25 Pages 26-27 Pages 28-29
Airports 4 4 4 4 4 4 4 4
CATV 4 4 4
Commercial Building 4 4 4 4
Electric Utility/ 4 4 4 4 4 4 4 4
Markets
Industrial Substations
Government/Military 4 4 4 4 4 4 4 4
Manufacturing 4 4 4 4 4
Mining 4 4 4 4 4
Petrochemical 4 4 4 4 4 4 4
Ports 4 4 4 4 4
Railroads 4 4 4 4 4
Rapid Transit 4 4 4 4 4
Telecommunications 4 4 4 4 4 4
(Cellular, POTs, etc.)
Universities 4 4 4 4 4 4 4 4
Water/Waste Treatment 4 4 4 4 4
Wind/Renewable Energy 4 4 4 4 4
1-866-254-0962 www.megger.com/us 1
5/10-KV INSULATION TEST EQUIPMENT 5/10-KV INSULATION TEST EQUIPMENT
Equipment with operating voltages above 1 kV requires Megger 5- and 10-kV insulation testers are used in a Megger MIT1020/2
commensurately higher test voltages. Therefore, to be fully number of markets such as:
NEW
in conformance with the most modern testing Ideal for performing diagnostic testing of large motors
n Airports
requirements, Megger offers a family of high-quality
n Electric Utility
insulation testers at voltages above 1 kV. At the core of high- Insulation testing as part of a predictive/preventive electrical maintenance program is becoming increasingly
voltage testing 5 kV the MIT510/2 and MIT520/2 afford n Industrial Substations rigorous and demanding. In recognition of the critical significance of such demands, the IEEE revised their motor
the highest level of quality testing along with prime safety, n Government/Military testing standard to incorporate new considerations that meet the challenges of
convenience and portability. modern equipment and operations.
n Manufacturing
n
For complete insulation testing capability of all high-capital Mining In response, Megger expanded our line of insulation testers to offer the MIT1020/2, a 10 kV model dedicated
equipment, Megger goes one step further! The universal to the provisions of the revised standard. With this one tester, 100% IEEE compliance can be attained for
n Petrochemical
testing standard for rotational equipment, IEEE 43-2000, every applicable motor in existence.
n Ports
increased the test voltage recommendation to 10 kV for
equipment rated 12 kV and above. Full compliance with n Railroads/Rapid Transit Added to the familiar features and functions, the new MIT1020/2 offers:
this standard can be attained with just one tester, the n Universities n Increased measurement range to 35 Tera-ohms, in order to provide trending
MIT1020/2. n Wind/Renewable Energy values for the best of insulating materials and highest capital equipment.
n Expanded test voltage range from 50 V to 10 kV, in 10 V increments to 1 kV
PowerDB Lite, a unique software program, is and 25 V increments above 1 kV.
n
included with the Megger MIT520/2 and MIT1020/2
INDUSTRY BEST! Additional automated standardized tests to include Step Voltage, Dielectric
units. PowerDB Lite offers an easy-to-use interface
The MIT510/2, 520/2 Absorption Ratio and Dielectric Discharge tests.
for products to document results. You can easily
& 1020/2 feature a
run tests, retrieve data, annotate results and print n Capability to measure capacitance of test item from 10 nF to 50 F,
CATIV 600 V providing the operator with an additional valuable diagnostic tool.
complete test forms.
Safety Rating!
See Page 35 for more information on this powerful software! n RS232 and USB download of results. (Cables included.)
n 250, 500, 1000, 2500, 5 kV and 10 kV preprogrammed test voltages.
Selection Guide for MIT510/2, MIT520/2 and MIT1020/2 5-kV and 10-kV Test Leads Medium Test Clips
These clips are designed
Model Number MIT510/2 MIT520/2 MIT1020/2
Facilitates connection to a variety of de-energized systems for clamping on larger
Catalog Number 1000-372 1000-376 1000-380
diameter test pieces but
Display Analog/Digital 4 4 4
where space is at a
Megger offers a range of lead sets and clips of various sizes and
Power Supply Line power 4 4 4 premium. The insulation is
electrical characteristics for use with MIT510/2, MIT520/2 and
4 4 4
designed only to protect
Rechargeable MIT1020/2 insulation resistance testers, enabling the user to
the user from the output
10.0 kV 4 choose the most applicable lead set for the work in hand. In all
of Megger 5-kV and 10-kV
cases it is the responsibility of the user to use safe working
5.0 kV 4 4 4 (set below 6 kV)
practices and verify that the system is safe before connection.
4 4 4
insulation resistance testers. The clips cannot in any
2.5 kV Even isolated systems may exhibit significant capacitance which
circumstance be relied on to protect the user from live ac
4 4 4
Test Voltage 1.0 kV will become highly charged during the application of the
systems.
insulation test. This charge can be lethal and connections,
500 V 4 4 4 including the leads and clips, should never be touched
250 V 4 4 4 during the test. Compact Test Clips
4 4
10 V steps 50 V to 1 kV, 25 V steps 1 kV to 5 kV These clips are designed
Please note the Compact Test Clips (210968/EV6121-451/
for clamping on test
Max reading 15 T 15 T 35 T EV6121-452) can be used with MJ15 and BM15 as well as the
pieces where access is
MIT510/2, MIT520/2 and MIT1020/2.
Min reading 10 k 10 k 10 k limited. There is no
4 4 4
Measurements Voltage
insulation on these clips.
Extreme care must be
4 4 4
Capacitance and time constant
Large Test Clips
These clips are designed taken to avoid electric
Leakage current 4 4 4 for clamping on larger shock when connecting
4 4 4 diameter test pieces. The or disconnecting due to
Auto IR
the bare metallic clips.
4 4
insulation is designed
Polarization index
only to protect the user
Test Types Step voltage 4 4 from the output of
4 4 Megger 5-kV and 10-kV Control Circuit Test Set
Dielectric discharge
insulation resistance These clips are designed
Dielectric absorption ratio 4 4 for testing low voltage
testers and systems
CAT IV 600 V safety rating 4 4 4 below 1 kV to the category rating of 1000 V ac. The clips cannot circuits with test voltages
up to 1 kV. The insulation
Timer control 4 4 in any circumstance be relied on to protect the user from live
systems above 1 kV ac. is designed only to protect
Timer display 4 4 4 the user from the output
3mA test currents 4 4 4 of Megger 5-kV and 10-kV
insulation resistance testers
Other Features USB output (cable included) 4 4
set to a maximum output voltage
RS232 output (cable included) 4 4 of 1 kV. Do not use this lead set at voltages above 1 kV.
Calibration certificate included 4 4 4
4 4
Cat. No. Description (Closed) Length Opening in Set Basic Double Rating Price USD
Compatible with Megger download software
6220-811 Large Test Clip 8.7 x 5. 2 in. 10 ft 1.3 in. 3 10 kV dc 5 kV dc 1000 V ac CAT IV $160.00
List Price USD $3,265.00 $4,250.00 $5,135.00 (220 x 134 mm) (3 m) (34 mm)
What is the IEEE 43-2000? 6220-820 Medium Test Clip 5.4 x 2.9 in. 10 ft 1.3 in. 3 6 kV dc 3 kV dc 1000 V ac CAT V $155.00
(139 x 73 mm) (3 m) (34 mm)
Following is a brief summary of the highlights of Standard n In lieu of historical records, minimum acceptable values
43-2000, the IEEE Recommended Practice for Testing Insulation (based on the type of equipment) for both tests are indicated. 210968 Compact Test Clip 2.2 x 1 in. 10 ft .7 in. 3 None None N/A $225.00
Resistance of Rotating Machinery. (58 x 25 mm) (3 m) (18 mm)
n Depending on the machine rating, the readings for one or
n Test voltages up to 10 kV are recommended for windings EV6121-451 Compact Test Clip 2.2 x 1 in. 25 ft .7 in. 3 None None N/A $320.00
both tests should exceed the minimum acceptable values.
rated greater than 12 kV. (58 x 25 mm) (8 m) (18 mm)
n If the readings are below the minimum acceptable values,
n Both the insulation resistance and the polarization index test EV6121-452 Compact Test Clip 2.2 x 1 in. 50 ft .7 in. 3 None None N/A $365.00
the winding is not recommended for an over-voltage test
are recommended. (58 x 25 mm) (15 m) (18 mm)
or for operation.
6220-822 Control Circuit 2.2 x 1 in. 10 ft .8 in. 2 N/A 1 kv dc N/A $124.00
n Test results should be compared to historical values to
Test Set (58 x 25 mm) (3 m) (20 mm) Clip or Prod
identify changes.
MIT410-TC
MIT430-TC
(1000-574)
NEW maintenance, service and repair
MIT400
Megger MIT415
MIT40X
MIT410
MIT430
MIT481
MIT420
MIT485
MIT480
in the electrical, power and Cat. No.
n The wide range of test voltages telecommunications industries.
make the MIT415 ideal for ESD The instruments feature Meggers
Insulation Voltage Range
testing and maintenance patented dual digital and analog
50 V, 100 V 4 4 4 4 4 4 4 4
arc displays showing both
n DC and TRMS ac voltage 250V, 500V, 1000 V 4 4 4 4 4 4 4 4
measurement result and the actual
measurement 10 to 100 V variable 4
test voltage being delivered
n Continuity testing at 200 mA simultaneously. Insulation range (G) 20 100 200 200 100 200 100 200 200 2-20
or 20 mA Continuity Measurement
4 4 4 4 4 4 4 4
The units include an exceptional K ohms range to 999 K ohms
n
4 4 4 4 4 4 4 4 4 4
Comes complete with case insulation resistance measurement range Variable current limit, 200 mA/20 mA
and leads that extends from 20 Gigohms to 200
Additional Functions
Gigohms, with the option to display the
Capacitance (0.1 nF to 10 F) 4 4 4 4 4
insulation test voltage or leakage current
Frequency: 40 Hz to 400 Hz 4 4 4 4 4 4 4 4
on the secondary display. Measurement
Insulation timed, PI, DAR tests 4 4 4 4 4 4 4
Ordering Information for MIT415 of cable distance by capacitance is
featured on two of the units, providing Additional Features
Cat. No. Test Voltages List Price USD a convenient cable length test. Result storage 4 4 4 4 4
Compatible with Megger download software 4 4 4
4 4 4
1000-351 10, 25, 50, 100, 250, 500 $575.00 A 200 mA continuity Bluetooth downloading
measurement is available with
Included Accessories
4 4 4 4 4 4
a 0.01-ohm resolution for fast
Remote switch probe
4 4 4 4 4 4 4 4
accurate cable/wire resistance
Silicone test leads
4 4
measurement. This can be set to
Bed of nails test leads
4 4 4 4 4 4 4 4 4
20 mA where conformity to electrical
Calibration certificate
testing regulations is not required,
Carry case:
4 4 4 4 4 4 4 4
extending battery life.
Blow molded
TRMS voltage measurement allows accurate measurement on Soft canvas (shown in picture above) 4 4
noisy lines providing a wide range of measurement applications. Three-year warranty 4 4 4 4 4 4 4 4 4 4
List Price USD $555.00 $635.00 $685.00 $780.00 $635.00 $810.00 $610.00 $830.00 $930.00 $655.00
Megger MIT300 Series Selection Guide for MIT300 Series Megger MIT200 Series Selection Guide for MIT200 Series
MIT310A
MIT220
MIT230
MIT210
MIT200
Analog
MIT320
MIT300
MIT310
MIT330
Provides an instrument for all levels of testing Economical, rugged, easy to use
Cat. No. Cat. No.
The MIT300 Series of insulation testers meet the needs of The MIT200 is one of the smallest insulation testers available on
Insulation testing the market today. With four product options available, all the Insulation testing
electrical contractors. They incorporate features such as
automatic discharge, audio-visual warnings, and test inhibition 4 4 4 4 4 MIT200 instruments offer a range of safety and operation features
4 4
250 V
250 V
to ensure operator safety and protection from accidental 4 4 4 4 4 expected from a Megger tester. The combined analog pointer and
4 4 4
500 V
misuse. digital readout provide both accuracy and charge/discharge 500 V
4 4 4 4
4 4
1000 V characteristics. Auto continuity testing removes the need for a 1000 V
4 4 4 4 4
The series includes five models to match every users needs.
4 4 4 4
Range to 999 M third hand.
The entry-level MIT300 offers insulation test voltages of 250V 1000 M range
and 500V, while the remaining models allow testing at 250V, Insulation limit alarm The instruments are rated to CAT III 600 V. Voltage warning and Auto-ranging 4 4 4 4
4 4
4 4 4 4
500V and 1,000V. The MIT310 adds a voltmeter function. The (0.01 M to 999 M) display, plus voltage lockout protect both the user and the
Auto discharge
MIT320 has a backlight, illuminated panel, k range, limit instrument, if accidentally connected to a live circuit. The MIT200
4 4 4 4
Continuity testing
Test inhibit
4 4 4 4 4
alarm and adjustable continuity buzzer. The MIT330 can store Series meet a wide range of international testing standards
4 4 4 4
Continuity to 100
up to 1000 test results. The MIT310A features a genuine as well as BSEN 61557 and IEC61010. Live circuit voltage display
Continuity buzzer 4 4 4 4 4
mechanical analog display. Continuity testing
Lead null to 9 4 4 4 4 0.5
The MIT300, MIT310, MIT320 and MIT330 feature an exclusive
analog/digital display that clearly shows measurement results. Adjustable buzzer 1 to 20 4 4 Continuity @ >200 mA 4 4 4 4
4 4 Test leads 4 4 4 4
Switched test probe
4 4 4 4 4 CATIII 600 V 4 4 4 4
IP54 weatherproof
Accepts rechargeable batteries 4 4 4 4 4 List Price USD $340.00 $360.00 $415.00 $485.00
Downloading 4
Calibration certificate 4 4 4 4
3-year warranty 4 4 4 4
Famous Major Megger Insulation Resistance Testers Cat. No. Test Voltages Features List Price USD
This specialty line of instruments has become synonymous over the years for fine craftsmanship, something you have come
to expect from Megger. These instruments continue to be very popular today with a choice of six outstanding models.
NEW
n Continuously variable test voltage, 0-30 kV
General Purpose Digital High Resistance
Autoranging Model MIT30 30 kV n User selectable current trip point, 0-360 Amp $7,450.00
Model Model
n Robust bright LEDs visible in direct sunlight
212159 100, 250, 500, 1000 0 to 2000 M 0 to 5000 Hand-cranked $980.00 n MJ15 hand-cranked and battery operated
General
212359 100, 250, 500, 1000 0 to 2000 M 0 to 5000 Line/Hand-cranked $1,055.00 n BM15 battery powered only
Purpose
212459 100, 250, 500, 1000 0 to 2000 M 0 to 5000 6 AA cells $980.00
212559 100, 250, 500, 1000 0 to 2000 M 0 to 5000 Line/Recharg. Battery $1,055.00
with internal charger
5-kV DC Dielectric shown
Digital 210600 100, 250, 500, 1000 0.10 to 1999 M 0.01 to 6 AA cells $1,020.00 DC Dielectrics
Autoranging
19.99 k
n Ideal for insulation resistance measurements in
High 210170 100 0 to 20,000 M 0 to 5000 Hand-cranked $1,165.00 medium voltage equipment, maintenance and field
Resistance 250 220005 5 kV $2,960.00
testing applications
500
n Leakage current measurement as low as 0.1 A
1000
220015 15 kV
n
$3,990.00
Fast charging of high capacitance equipment
Request your particular instrument using the appropriate catalog number.
n Analog metering range switching for greater accuracy
Need help determining an instrument for your particular needs?
Call your local Megger authorized distributor or dial 866-254-0962 n Continuously adjustable Variac
Megger is the expert in ground resistance testing. From Megger ground testers are very useful in the following
time saving clamp-on ground testers to specialty models for markets:
Megger DET3 Megger DET4T2 NEW
high sensitivity testing, we have the ground resistance tester Contractor Series Enhanced Series
n Airports n Petrochemical
to fit your application and budget.
n CATV n Ports More choice, easier operation, less test time Increased ohm range for higher resistance measurements
The Megger line of ground resistance testers provides high
n Commercial Building n Railroads/Rapid Transit
accuracy, a broad testing range and fast, reliable
n Electric Utility/ n Telecommunications
measurements. Megger ground testers are easy to use and
lightweight. Industrial Substations (Cellular, POTs, etc.)
n Government/Military n Universities
The next few pages will outline the full line of ground
n Manufacturing n Water/Waste Treatment
testing equipment that Megger has to offer.
n Mining (open pit) n Wind/Renewable Energy
Our staff of professionals will help with your technical
grounding questions and recommend the ground tester that
best fits your need. Call us at 866-254-0962 or search the
web at www.megger.com/us
function. With this added function, current on the ground rod can DET4TC2, left
n Fall of Potential n Soil Resistivity
be measured for improved personnel safety and noise detection.
n Four Potential n Star Delta The DET3TC includes the ART (Attached Rod Technique) method
n Simplified Fall of Potential n 61.8% Rule of testing which greatly reduces testing time.
n Slope n Intersecting Curves These Megger digital ground testers are powered by eight AA
See Page 35 for more information on this powerful software!
batteries which give excellent testing time the status of the
batteries is given by a bar graph on the LCD. The Megger DET3
Series earth/ground testers is designed to meet stringent safety
standards and is rated CAT IV 100V.
Each DET3 comes complete with test leads, stakes, batteries,
calibration certificate and rugged polypropylene carry case. The newest ground testers from Megger offer a comprehensive
solution to ground resistance and soil resistivity testing needs.
The instruments provide such functions as 2 pole, 3 pole, 4 pole,
Attached Rod Technique (ART), stakeless, leakage current and
Whats in the DET3T Name? ground noise voltage measurements. All models now inlcude
DET3TC DET3TD selectable output voltage (25 V or 50 V). The DET4TC2 and
DET4TCR2 offer four selectable test frequencies (94, 105, 111
D Digital D Digital and 128 Hz) for improved testing in noisy environments.
E Earth E Earth An optional ICLAMP augments the traditional fall-of-potential
For the 3rd year in a row, Megger has
won the highly coveted NECA Show T Tester T Tester measurement method with ART which allows electrode testing
Stopper Award for our DET4 Series. without disconnection and also leakage current measurement
3T 3 Terminal 3T 3 Terminal down to 1 mA. The VCLAMP, a second optional clamp, enables
C Works with IClamp D Disposable Battery true stakeless measurements to be made where driving a stake
(optional) is not practical.
The DET4TC2 and DET4TD2 are powered by eight AA batteries
which give excellent testing time. The DET4TR2 and DET4TCR2
are powered from rechargeable AA cells. For added convenience
on all three units, the battery status is displayed using a bar
graph.
The Megger DET4T2 Series earth/ground testers is designed to
meet stringent safety standards and is rated CAT IV 100V.
THE ART OF GROUND TESTING The ART method is more convenient and significantly reduces Whats in the Battery
Ground testing using the ART (Attached Rod Technique) method your testing time as much as 40 percent! DET4T Name? Included Accessories Type
is more convenient and reduces testing time. Models DET3TC,
terminal adapters
Earth/ground kit,
The DET4TC2 and DET4TCR2 offer ART capability as well as DET4TD2
DET4TC2 and DET4TCR2 include this additional testing
Field Calibrator
Leads & spikes
External ac/dc
stakeless testing and of course 4, 3 and 2 pole testing.
Rechargeable
4 Right-angle
C/N 6320-245
capability. D Digital
ICLAMP and
Disposable
VCLAMP
Adapter
A nagging problem with traditional ground testing has been the E Earth
requirement to disconnect the utility connection. Using the ART
method you can reliably measure a grounding electrode while T Tester
Model No. Cat. No.
still connected and prove it! 4T 4 Terminal
DET4TD2 1000-347 n n n n
Ground Current Range (with optional current measuring clamp) 0.5mA to 19.9A 4T 4 Terminal
DET4TCR2+Kit 1000-405 n n n n n n n n
List Price USD $805.00 $750.00 R Rechargeable Battery
2 2nd Generation
DET4T2 Series Model No. DET4TD2 DET4TR2 DET4TC2 DET4TCR2
Selection Guide DET4TC2
Cat. No. 1000-347 1000-324 1000-345 1000-346
2-Pole Measurement 4 4 4 4 D Digital
3-Pole Measurement 4 4 4 4 E Earth
Professional Earth/Ground
4-Pole Measurement 4 4 4 4
T Tester
Soil Resistivity 4 4 4 4 Testing Kit
4T 4 Terminal
Tests ART (Attached Rod 4 4
Technique) Capability C Works with Clamp Can be used with any DET3 or DET4 models
Stakeless (Clamp-on) 4 4 2 2nd Generation Contents:
Measurement Capability
n Red and black cable reels (50 m); yellow and green
Resistance Range 0.01 to 20,000 0.01 to 200,000 DET4TCR2 cable reels (30 m)
n
Ground Voltage Range 0 to 100 V Earth electrode lead (4 m green, 4 mm shrouded
D Digital
Ground Current Range 0.5 mA to 19.9 A plug and large croc clip)
(with ICLAMP) Capability E Earth
n Auger style spikes - 4
Output Selectable Voltage (25/50 V) 4 4 4 4 T Tester
n Fiberglass measuring tape, 50 m
Test Frequency 128 Hz 94, 105, 111, 128 Hz
4T 4 Terminal n Molded polyethylene carrying case
Power Supply Alkaline Batteries 4 4
C
4 4
Works with Clamp Ordering Information
Rechargeable Batteries
4 4 4 4 R Rechargeable Battery Cat. No. Description Unit Price USD
Noise Rejection 40 V Peak-to-Peak
4 4 4 4
6320-245 Electrode and soil resistivity $675.00
Safety Rating CAT IV 100 V 2 2nd Generation stake and wire kit
Ingress Protection Rated to IP54 4 4 4 4
Hard Carry Case 4 4 4 4
4 4 4 4
Included Accessories Test Leads (49 ft, 33 ft,
33 ft, 10 ft) and Spikes
External ac/dc adapter 4 4
Certificate of Calibration 4 4 4 4
Warranty 3 Year 4 4 4 4
List Price USD $1,175.00 $1,415.00 $1,495.00 $1,750.00
The LT300 offers high current loop testing over a wide range of
frequencies and supply voltages with simple, fast, two-wire
operation. Its large clear display aids visibility in poor conditions.
The LT300 measures loop impedance of live circuits from hot to
neutral or hot to ground. Two loop impedance ranges are
provided:
Selection Guide for Clamp-on Models
20 resolution to 0.01
Model No. Range Power Display List Price
Resistance Source USD 200 resolution to 0.1
0.25 9.999 The instrument is housed in a rubber armored case with a built-in
DET10C 10 99.99 $1,500.00 cover to protect the display when not in use. The IP54
100 199.9 Battery Digital weatherproof rating provides excellent protection in adverse
200 400 conditions.
Ordering Information
DET20C 400 600 $1,660.00
The LT300 is supplied with a two wire (red/green) lead set, a
600 1500 Cat. No. Description List Price USD
certificate of test, and a hard carry case.
LT300 High current loop tester $665.00
DET10C and 20C come with a rugged carry case, calibration fixture,
carry case shoulder strap and interface cable (DET20C only).
Megger M7000 and M8000 Series Accuracy 1% 1% 0.3% 0.2% 0.08% 0.08%
ac Conversion Type
4 4 4 4 4
High specification, dual-display multimeters
Average Responding
TRMS 4
M7027
Megger AVO300 Series Current Ranges
n Professional multimeter with 0.3% accuracy for general
applications A ac 10 10 10 10 10 10
Simplicity and toughness in a multimeter
A dc 10 10 10 10 10 10
n Auto range and data hold
Resistance 40 M 40 M 40 M 40 M 40 M 40 M
n All units feature simple to use
n 4000 and 40,000 count selectable
autoranging functions Continuity
n Complies with IEC1010 Cat III 600V and Cat II 1000V Audible Buzzer 4 4 4 4 4 4
n The unique case design has a
Diode 4 4 4 4 4 4
M7029 separate fuse and battery
compartment
n Professional multimeter with 0.2% accuracy for general
Conductance in nS 400 400 400 400
applications n The rubber-armored case is Capacitance in mF 40 40 40 40
extremely tough and has an integral
n Complies with IEC1010 Cat III 600V and Cat II 1000V Frequency in Hz 250 k 250 k 4M 4M
4
rear stand
Duty Cycle
M8035 n The large display is easy to read with Display
n Professional multimeter with 0.08% accuracy and enhanced
4 4
.75 in. (19 mm) high characters. The
Single Parameter
4 4 4 4
functions AVO310 features a backlight
Dual Parameter
n Adds relative functions, MIN, MAX, MAX-MIN, AVG n Powered from a standard 9V battery 1 1 3 3 3 3 3 3 3 3
Number of Digits 3 2 3 2 4 4 and 3 4 4 4 and 3 4 4 4 and 3 4 4 4 and 3 4
n Complies with IEC1010 Cat III 1000V n Meet the safety requirements of CAT Bar graph 4 4 4 4
III 600V Backlit 4 4
M8037
Operation
n True RMS professional multimeter
Auto Ranging 4 4 4 4 4 4
n Store and recall Data Hold 4 4 4 4 4 4
4 4 4 4 4
n 0.08% accuracy with backlit dual display Max/Min Record
Relative Function 4 4 4 4
n Complies with IEC1010 Cat III 1000V
Rubber Boot Protection 4 4 4 4 4 4
For additional information
and complete specifications, Safety Cat III 600 V Cat III 600 V Cat III 600 V Cat III 600 V Cat III 1000 V Cat III 1000 V
M8037
go to www.megger.com/us Warranty Period 3 year 3 year 3 year 3 year 3 year 3 year
List Price USD $106.00 $128.00 $218.00 $254.00 $310.00 $373.00
Megger clampmeters are ideal for use in the installation, DCM300E AC Leakage Clampmeter Megger makes a line of test equipment specifically designed
maintenance, monitoring, or checking of electrical systems to test and maintain a variety of critical electrical apparatus
and equipment. These products offer a safe, accurate, non- Pocket-sized, lightweight and rugged found in electric utility and industrial substations. Also,
intrusive method of diagnosing faults on live electrical these instruments are rugged, field proven and useful in the
circuits. n Designed for non-intrusive measurement of leakage current following markets:
n 300 A range for standard current measurement n Airports n Power Plants
MMC850 Multi-conductor
n n Government/Military n Universities
Resolution to 0.01 mA for recognition of minute leakage
AC Digital Clampmeter currents n Mining
Used in place of traditional clampmeters n Data hold button retains the measurement on the LCD for
viewing at a later time
n A unique solution to current measurement Megger Handheld TTR20
in multiconductor cables
Ordering Information Lightweight, simple to operate, durable
n No need to split cables
Cat. No. List Price USD
n Flat or round section cables The TTR20 is an excellent complement to the world-renowned
DCM300E Leakage Clampmeter $430.00
n Backlit display hand-cranked TTR. It can measure the full range of transformers,
even high MVA types. It measures three-phase transformers phase
n Cable centralizing clamp by phase.
n Measure current on single-, two- and The TTR20 is the perfect tool for testing transformers for turns
three-conductor cables in one step ratio, polarity and excitation current. It is primarily designed to
fill a need for simple, push-to-test transformer testing. The TTR20
Ordering Information allows the user familiar with transformer testing to obtain results
Cat. No. List Price
without transformer configuration knowledge.
The significant features of the TTR20 include:
USD The TTR20 is so small and easy to use that it can be utilized in
n Fewer buttons and no menus to make it extremely easy to use
MMC850 Multi-conductor ac Digital Clampmeter $288.00 fleet service. Its high accuracy delivers the results that users
and acquire data.
are looking to achieve.
n No PC software needed to learn to upload data. Simply use
HyperTerminal.
DCM330 DCM310, DCM320, DCM340 n Prints data in real-time to maintain hard copies of test results.
n Replaceable AA (IEC LR6) batteries that last 12 hours or more
Measures ac current up to 200 A Ideal for electrical installation industry
(if using the specified batteries.)
n n
n Open-jaw design enables simple and Resistance measurement up to 20 M Measures turns ratio, polarity and excitation current.
fast measurements on DCM320; 400 on DCM340
n ac and dc voltage measurements up n Measures ac current up to 600 A
n
to 1000 V
Data hold feature
n
n
Resistance range up to 20 M
Meet safety requirements of
n Continuity buzzer and diode check IEC 1010 CAT III 600V Ordering Information
Additional Megger Substation Test Equipment The Megger DLRO family has defined the standard for Megger DLRO-10 and DLRO-10X
low-resistance measurements for decades. These
The DLRO-10 and DLRO-10X are built into a strong, lightweight
instruments are used in markets such as:
case that is equally at home in the field or in the laboratory. Light
n Airports enough to be worn around the neck, they are small enough to
n Electric Utilities/Industrial Substations be taken into areas which were previously too small to access.
n Government/Military The DLRO-10 uses a large, bright 412-digit LED display while the
DLRO-10X has a large, backlit LCD.
n Ports
n Power Plants The DLRO-10 displays the average of measurements achieved
using forward and reverse current, while the DLRO-10X displays
n Railroads/Rapid Transit both individual measurements and the average. The DLRO-10X
n Telecommunications (Cellular, POTs, etc.) uses a menu system controlled by a two-axis paddle to allow the
n Universities user to manually select the test current. The unit also adds real-
n
time download of results and on-board storage for later
Automatic Oil Test Set
Water/Waste Treatment
Single-phase, Hand-crank TTR Semi-automatic Oil Test Set download to a PC.
C/N OTS60PB n Wind/Renewable Energy
C/N 550005B C/N OTS60SX
Selection Guide for Digital Low Resistance Ohmmeters Megger DLROs require test leads, two potential and two Individual Test Leads
current, to make low-resistance measurements. In addition
DLRO10X to individual current and potential lead sets, duplex leads List
Cat. No. Type Termination Length Current Price
that combine current and potential connections in one set
are offered. A variety of C-clamps, Kelvin clips, fixed point, 242021-7 7 ft. (2 m) $275.00
and helical spring-point leads are available in various 242021-18 Potential Hand Spikes 18 ft. (5.5 m) N/A $350.00
lengths. 242021-30 30 ft. (9 m) $395.00
242041-7 7 ft. (2 m) $235.00
242041-18 Current Terminal Clips 18 ft. (5.5 m) 10 A $275.00
Helical Spring Points
Tips rotate and compress into the 242041-30 30 ft. (9 m) $310.00
probes body to ensure accurate 242144-16 Current Clamps 16 ft (5 m) 100 A $825.00
DLRO200 measurement. Cat. No. 242011-7, 242144-26 26 ft (8 m) $851.00
242011-18, 242011-30, 242009-18
General Purpose Model (247001) Cat. No. 242011-7
Duplex Test Leads
Heavy Duty Fixed Points List
Cat. No. DLRO-10 DLR0-10X 247000 247001 247002 DLRO200 DLRO200-115
Economical, light weight and Cat. No. Termination Length Current Price
Output Current
durable. Cat. No. 242002-7,
4 4 4 4 4
242011-7 7 ft. (2 m) 10 A $629.00
10 Amp 242002-18, 242002-30
4 4
EV6111-022 Helical Hand Spikes 8 ft (2.5 m) 10 A $375.00
200 Amp
4
242011-18 with 18 ft. (5.5 m) 10 A $702.00
Additional Smoothing Cat. No. 242002-7
EV6111-023 Spring Points 20 ft. (6 m) 10 A $525.00
Resistance Range 242011-30 30 ft. (9 m) 10 A $725.00
0 to 599.9 4 Heavy Duty C-Clamps EV6111-503* Duplex Hand Spikes 4 ft. (1.2 m) 10 A $430.00
0 to 1.9999 m 4 4 Current passes through the EV6111-517* Duplex Hand Spikes 8 ft. (2.5 m) 10 A $455.00
0 to 5.999 m 4 4 4 C-Clamp and screw thread;
4 4
EV6111-518* Duplex Hand Spikes 4 ft. (1.2 m) 10 A $425.00
0 to 19.999 m potential passes through a four-
4 4 4
Helical Hand Spikes
0 to 59.99 m point anvil insulated from the
4 4
242009-18 with Spring Points 18 ft. (5.5 m) 10 A $510.00
0 to 199.99 m clamp metal. Cat. No. 242004-7,
and Current
0 to 599.9 m 4 4 4 242004-18, 242004-30 Push-button Switch
4 4
Cat. No. 242004-18
0 to 1.9999 242002-7 Heavy-Duty 7 ft. (2 m) 10 A $460.00
0 to 5.999 4 4 4
Kelvin Clips 242002-18 Fixed-Point 18 ft. (5.5 m) 10 A $650.00
0 to 19.999 4 4 242002-30 Hand Spikes 30 ft. (9 m) 10 A $733.00
Feature spade lugs on outboard
0 to 59.99 4 4 4
end and alligator clips with
4 4
242003-7 Replaceable 7 ft. (2 m) 10 A $651.00
0 to 199.99 insulated, silver or gold plated Needle Points
0 to 1999.9 4 4
jaws. Cat. No. 241005-7, 242005-7,
4 4
242104-2-16 16 ft (5 m) 100 A $805.00
0.1 to 999.9 m 242006-7, 242006-18, 242006-30 242104-2-26 2 in. (5 cm) 26 ft (8 m) 100 A $915.00
Resolution Cat. No. 241005-7
242004-7 Heavy-Duty 7 ft. (2 m) 10 A $350.00
*0.1 4 4 4 4 4
242004-18 C-Clamps 18 ft. (5.5 m) 10 A $445.00
1 4 4 4 4 4 242004-30 30 ft. (9 m) 10 A $515.00
4 4 4 4 4
Hand Spikes, DH Series
10 241005-7** 0.5 in. (1.3 cm) 7 ft. (2 m) 10 A $480.00
4 4 4 4 4
Feature indicator lights in one of
100 242005-7*** Kelvin Clips 7 ft. (2 m) 10 A $165.00
4 4 4 4 4
the probes which duplicate
1 m
4 4 4 4 4
warning and signal lights on the 242006-7 1.5 in. (4 cm) 7 ft. (2 m) 10 A $290.00
10 m
4 4
instruments. Cat. No. EV6111-503 242006-18 Kelvin Clips 18 ft. (5.5 m) 10 A $425.00
100 m
(DH4), EV6111-517 (DH5). 242006-30 30 ft. (9 m) 10 A $750.00
Accuracy
4 4
Cat. No. EV6111-503 EV6220-755 Current Lead with 16 ft (5 m) 200 A $705.00
0.2% + 2 lsd
4 4
EV6220-757 HD Clips and 49 ft (15 m) 200 A $2,350.00
0.25% + 1 lsd
4 NEW EV6220-756 Separate Potential 33 ft (10 m) 200 A $1,335.00
0.3% + 2 lsd
4 4
EV6220-787 Leads with Clips 16 ft (5 m) 200 A $640.00
*0.5% + 2 lsd Wind Turbine Lightning
4 4
Kelvin clip and hook
*1.00% Protection Test Lead Set NEW ends on HD cable reel 328 ft (100 m)
Power Source Specially designed for measuring
1000-809* with friction brake 10 A $1,200.00
Rechargeable Battery 4 4 4 4 4 resistance of lightning protection DH2 lead with duplex
Line Power 4 4 circuit between wind turbine hand spikes and 16 ft (5 m)
List Price USD $2,900.00 $3,615.00 $3,312.00 $3,292.00 $4,467.00 $5,360.00 $5,785.00 blade tip to ground. hook end
Cat. No. 1000-809
Configurable current output: 10 A to 200 A * Used with DLRO10 and DLRO10X only
** Gold plated
* Varies with current
*** Silver plated
Megger has the right equipment for your battery Megger BITE 3 Megger BITE 2 and BITE 2P
maintenance requirements regardless of whether you are
testing flooded lead-acid, VRLA or Ni-Cd batteries. The BITE Useful in determining the health of batteries On-line testing, no downtime, no battery discharge
products are so easy to use that the test can be performed
quickly by one person. All BITE instruments have the ability The BITE 3 determines the health of lead-acid cells up to The BITE 2 and BITE 2P determine the condition of lead-acid
to download to a PC for database use and further data 2000 Ah by taking measurements of the most important battery and nickel-cadmium cells up to 7000 Ah such as in telco, UPS,
analysis. parameters. It measures cell impedance, cell voltage, intercell substation and many more.
connection resistance and float and ripple currents. It also
Megger battery testers are very useful in the following measures the harmonic content of the ripple current with its The BITE 2 is compact and is ideal for service companies and for
markets: built-in spectrum analyzer. Its firmware is upgradeable through those using laptops to interpret data on-site. Impedance
measurements, along with other data such as ambient and pilot
n Airports the internet.
cell temperatures and ac ripple current, assist in determining the BITE2P
n Electric Utility/Industrial Substations The BITE 3 comes complete with: overall condition of battery systems.
n n
n Government/Military ProActiv software (see box, left) Dual point test leads (7 ft) The BITE 2P has a built-in printer to review data, find weak
n Canvas carrying case n Line charger cells, and leave a hard copy record at the site.
n Manufacturing
n RS232 modem cable n Spare test lead tips
n Ports
The BITE 3, combined with ProActiv, is extremely useful in
n Power Plants determining the health of batteries and to plan their replacements
n Railroads/Rapid Transit in an orderly, non-emergency manner. The BITE 3 and ProActiv
BITE2
are the most powerful battery management system available
n Telecommunications (Cellular, POTs, etc.) today.
n Universities
n Water/Waste Treatment
Ordering Information
ProActiv Battery Database Cat. No. List Price USD
Management Software
BITE3 Battery Impedance Test Equipment $6,188.00
Quickly, effectively organize and analyze Ordering Information
your battery test data
List Price
Cat. No. Description USD
A powerful, easy-to-use battery database management software
designed to analyze individual batteries in a battery system. BITE2 Battery Impedance Test Equipment $6,630.00
n Organizes and manages battery data BITE2P Battery Impedance Test Equipment $7,410.00
with built-in printer
n Performs trending analysis
n Assists the user to manage multiple batteries
n Easy-to-use graphical navigation
n Uses various data import and data entry wizards
n Prints basic reports
Megger offers a wide range of test and measuring instruments for unique applications.
These high quality, easy to use instruments include:
Cable Locators/Route Tracers
n Electrical Appliance Testers n Leak and Corona Testers
n Cable Locators/Tracers/Cable Height Meters n Coating Thickness Gauges
n Voltage Detectors n Three-Phase Sequence Equipment Energized Cable Tracer Cable Height Meter
n Compact and lightweight only 2.5 lbs (1.13 kg) n Inherently safe
n Locates and traces cable energized with 50/60 Hz n No physical connection to cables
under test
n Three-way swivel detector measures cable depth
n Noise and stray signal rejection
n
Electrical Appliance Testers Provides up to 150 hours of operation
n Measures the height of up to
6 overhead cables
n No moving parts, batteries or binding posts and requires no n Carrying out the required calculations for chosen test method.
Motor & Phase Rotation Test Sets power source Many methods that offer real advantages are not utilized because
n Determine the rotation of the their complexity.
n Housed in a rugged, insulated enclosure
direction of single and
Earth test methods covered by PowerDB Lite:
three-phase motors
before connection to n Full fall of potential
the line
n Soil resistivity
n Identify true phase
n Simplified fall of potential
sequence of energized
50/60 Hz power lines up n Star delta
to 600 V
n Slope
n Supplied with easily
n Four potential
connected alligator clip Cat. No. 565250 Insulation Resistance Tests
leads The test forms supplied in PowerDB Lite work with the Megger n 61.8 percent rule
MIT520/2 and MIT1020/2 insulation resistance test sets. Test
n Determine polarity of n Intersecting curves
results can either be downloaded from the instrument onboard
power and instrument memory or during the test with real time download. Complex methods, for example the four potential method where
transformers
Standard equipment test forms knowledge of the electrical center of the earth system is not
Selection Guide for Three-phase Sequence Equipment required, can now be easily performed with calculations built in
Cat. No. 560060
n Cable PI test to the test forms. PowerDB Lite is an invaluable tool that will
Max Frequency List
simplify earth ground and insulation test reporting.
Cat. No. Description Voltage (Hz) Price USD n Transformer DAR test
560060 Motor and Phase 600 V 50/60 $955.00 Theres even a CSV output facility for those who wish to export
n Generator PI test
Rotation Tester data to Excel and produce their own forms. Even difficult earth
560400 Motor and Phase 600 V 25/50/60/400 $1,050.00 n Transformer PI test ground testing calculations are also a thing of the past with
Rotation Tester PowerDB Lite.
n Motor PI test
Cable Phasing Meter 830220-1 Cable Phasing 30 kV 50/60 $2,290.00
n Designed to phase out cables Meter n Rotating machinery PI test
n Battery operated 565250 Phase Sequence 600 V 50/60 $205.00 n Synch motor PI test
Tester Turn to page 2
n Measures capacitance of test n Rotating machinery step voltage
PSI-700 Phase Sequence 700 V 50/60 $500.00 for information on
point if system voltage is known Tester n Synch motor PI test armature Megger insulation
n Works on capacitance. Generic test forms testers and page 12 for
Test points incorporated into information on Megger
elbow connectors. n Polarization Index (PI) test
ground testers
n Step voltage test
Multimeters 18
Clampmeters 20
Megger
Electrical
Test Instruments
Catalog
Valley Forge Corporate Center
2621 Van Buren Avenue TOLL FREE
Norristown, PA 19403-2329 USA
Phone: 866-254-0962
CUSTOMER SERVICE NUMBER
Phone: 610-676-8500
1-866-254-0962
WWW.MEGGER.COM/US
Fax: 610-676-8610
WWW.MEGGER.COM/US
Contact us regarding questions,
customer service and product repairs
The word Megger is a registered trademark
MEG-749/17.15M/2.2009