Escolar Documentos
Profissional Documentos
Cultura Documentos
Tools:
Purple Cows 2 in 1 Combo Trimmer #1040
Purple Cows Hot & Cold Laminator #3015/3025
1. First up we will start with the cake stand! You can of course
use the colors that match your theme, I've just picked bright fun
colors for my project. Take 3 pieces of 12 x 12 cardstock for the
base of your cake, mine is green.
2. Using the guillotine on your 2 in 1 combo trimmer cut one of
the 12 x 12's in half (making (2) 12'' x 6'' pieces) score 1/2'' along
one of the lengths on each piece and also 1/2'' in on both ends
of the pieces, cut into the corners where the score lines meet so
the sides will fold in smoothly. Trim the other 12 x12 piece down
to 11'' on one side and then cut this in half (creating 2 pieces 11''
x 6'') These will form the sides of the box and ensure it stays
square by trimming this extra inch off.
3. Using the Helmar glue, stick the sides of the box together
(obviously with the 2 longer pieces opposite each other there-
fore creating a square) From the remaining green 12 x 12 cut a
square 11'' x 11'' with the guillotine and add this to the top of
your cake base. Because of the accurate measurements on the
base plate and accurate cutting of your guillotine on the 2 in 1
combo trimmer, everything will line up to create the perfect
square box.
4. Cut a piece of 12 x 12 white cardstock in half (creating 2
pieces 12 x 6) Score along one length of each piece at 1/2'' and
score along both ends of both pieces at 1/2''. Flip the cake base
over and adhere these 2 white strips inside for support. This finishes the construction of the base layer of your cake.
5. The next layer of the cake is con
structed in exactly the same way, just using a different color cardstock (mines yellow) and different sizes as follows; Cut 2 sides @ 8'' x
5 1/2'' scored along 1 of the lengths of each at 1/2'' and both ends on both pieces at 1/2'' Cut 2 sides @ 7'' x 5 1/2'' scored along 1 of
the lengths of both pieces at 1/2'' and 1 square top 7 x7. Construct in the same way and this time only cut 1 support from white
cardstock at 8 x 5 1/2 scored at 1/2'' along one length and 1/2'' in on both ends.
6. And finally to finish the cake construction create another box for the top in a different color (mines pink) and differentYear sizes as
follows; Cut 2 sides @ 4 1/2'' x 4 1/2'' (high) scored along the 1 of the lengths of each at 1/2'' and both ends on both pieces n te eat 1/2''
Cut 2 sides @ 3 1/2'' x 4 1/2'' (high) scored along 1 of the lengths of both pieces at 1/2'' and 1 square top 3 1/2'' x 3 1/2''. Construct in
the same way and this time you don't need to make a support as the box is quite small.
7. To decorate you will use the rotary side of the 2 in 1 combo trimmer and decorative click blade #2803 creating your own layers of
decorative paper ribbons which are so easy to make with this trimmer, have you seen how thin you can cut paper ribbons with it
accurately every time? Ok with the scallop blade good to go in your trimmer create the decorative strips as follows;
For the green box; trim 2 strips of white cardstock 3'' x 12'' with the scallop blade and score at 1/2'' on both ends of both pieces,
adhere these two to opposite sides of the base. Trim 2 more pieces of white cardstock with the scallop blade 3'' x 11'' and adhere
these to the opposite two sides of the base box left covering the overlaps of the other two white strips. Now trim some patterned
paper from the Cosmo Cricket DeLovely kit using the same scallop blade, you will need two strips 2'' x 12'' scored at 1/2'' on both
ends of both pieces and 2 strips 2'' x 11''. Adhere these centrally on the white strip on the box. And finally from some more white
cardstock trim 2 pieces (with the scallop blade again) 1'' x 12'' scored at 1/2 '' in on both ends of both pieces and 2 pieces 1'' x 11''. I
have then cheese holed these white strips with my crop-a-dile for decorative interest. Adhere centrally on the patterned paper strips
around the box.
8. For the yellow box the creating is just the same using the scallop blade #2803 but with different sizes and a different patterned
paper. The sizes to cut as are follows; from white cardstock trim 2 strips 2 1/2'' x 8'' scored at 1/2'' on both ends of both pieces and 2
strips 2 1/2'' x7'', adhere round box. From patterned paper trim 2 strips 1 1/2'' x 8'' scored at 1/2'' on both ends of both pieces and 2
strips 1 1/2'' x 7'' , adhere round box and finally trim 2 more strips of white cardstock 3/4'' x 8'' scored at 1/2'' on both ends of both
pieces and 2 strips 3/4'' x 7'', cheesehole if you wish and adhere to box.
9. For the pink box the creating is just the same using the scallop blade #2803 but with different sizes and a different patterned
paper. The sizes to cut as are follows; from white cardstock trim 2 strips 2'' x 4 1/2'' scored at 1/2'' on both ends of both pieces and 2
strips 2'' x3 1/2'', adhere round box. From patterned paper trim 2 strips 1'' x 4 1/2'' scored at 1/2'' on both ends of both pieces and 2
strips 1'' x 3 1/2'''' , adhere round box and finally trim 2 more strips of white cardstock 1/2'' x 4 1/2'' scored at 1/2'' on both ends of
both pieces and 2 strips 1/2'' x 3 1/2'', cheesehole if you wish and adhere to box.
10. All that remains now is to add some of the 3D stickers for decoration, place in
the middle of the party tea table and add some cakes!
Purple Cows Inc.
3210 North Canyon Rd. Suite 307 Provo, UT 84604 USA
www.purplecows.net • information@purplecows.net
Party Decorations
Now we have the table centre piece what about the walls? Well
it's time to fire up the Purple cows Hot/cold laminator and
create some bunting with a difference! You will need some
Step by Step: different color 12 x 12 cardstock, again pick yours to suit your
Bunting theme, I have stuck with my cake colors, some contrasting 12 x
12 patterned paper, Anna Griffins fitted great for my theme
and some 7 x5 Hot pockets. (oh and some lovely flowers from
the garden)
4. Unfold the newly cut triangle and place the fold line
on the guillotine cutting guide and cut the piece in half
making 2 triangles for your bunting. Make as many of
these as you need in as many colors as you want.
6. Fire up the Hot/Cold laminator on the 3mil hot setting and while it is heat-
ing up mark out a triangle on a piece of 7'' x 5'' white cardstock. You need the
base of the triangle to measure 5'' and it's height to be 6 1/2'' (mark the base
line half way at 2 1/2'', draw a straight line up from this at 6 1/2'' then from that
top point draw a line down to meet the ends of your base line to create the
triangle) Then from either end of the base line make a mark 2'' in.
Step by Step: So we now have a table centre piece and wall decor, what about some mood lighting?
Faux Candle Pillars These laminated pillars are so super easy, look great and are fun to make!
2. Once you have all the pockets laminated (switch off the laminator!) Roll them into tubes and adhere the
overlapping seam with some Helmar glue. Once the glue is set, decorate the outside of the tubes with
some Petaloo flowers and bazill bling gems. Add a BATTERY operated tea light inside (please don't use a
real candle, the laminate WILL melt!) and watch it glow on the birthday tea table. I've even made Christmas
versions of this by piercing small holes in the laminate before I make the tube and pushing battery oper-
ated fairy lights through them! Simple 'lighty up' fun :)
So what party goodies will you cook up with your Purple Cows
tools? Please share with us over at the pasture! Thanks for playing
Purple Cows Inc. and until soon I hope you have some moo-verlous crafting fun,
3210 North Canyon Rd. Suite 307 Provo, UT 84604 USA
love M x
www.purplecows.net • information@purplecows.net