Escolar Documentos
Profissional Documentos
Cultura Documentos
• Electrical energy is the product of power (P) and time (t) of how long
the power is consumed or spend.
W= P*t
Unit of measurement : Kilowatt hour
Disk to rotate
1) Voltage coil - many turns of
fine wire encased in plastic,
connected in parallel with load.
2) Current coil - three turns of
thick wire, connected in series
with load.
3) Stator - concentrates and
confines magnetic field.
4) Aluminium rotor disc.
5) rotor brake magnets.
6) spindle with worm gear.
7) display dials.
Electromechanical energy meter continue…
Connection Diagram
Electromechanical energy meter continue…
Working formula
3600 ∗ 𝐾ℎ
𝑃=
𝑡
Where 𝑃 = Power in watts
𝐾ℎ = The amount of energy represented by one revolution of the disc
in units of watt-hours per revolution .
𝑡 = time in seconds taken by the disc to complete one revolution,
Electromechanical energy meter continue…
Time t = 16
Kh = 8 [in units of watt-hours per revolution]
then
3600 ∗ 𝐾ℎ
𝑃=
𝑡
So power =1800 watts or 1.8Kwh or 1.8 unit energy.
Electronic Energy Meter (EEM)
Electronic Energy Meter (EEM)
How it works?
Electronic Energy Meter is based on Digital Micro Technology (DMT).
Functions are controlled by a specially designed IC called ASIC (Application
Specified Integrated Circuit).
Analogue circuits are also present in EEM to “Sample” current and voltage.
The ‘Input Data’ (Voltage) is compared with a programmed ‘Reference
Data’ (Voltage) and a ‘Voltage Rate’ is given to the output.
This output is then converted into ‘Digital Data’ which is converted into
average value.
Average Value / Mean Value is the measuring unit of power.
The output of ASIC indicated by the LED as “Pulses”. These pulses are equal
to Average Kilo Watt Hour (kWh / unit).
Electronic energy meter