Escolar Documentos
Profissional Documentos
Cultura Documentos
Alain LOPPINET
CEN TC12 Chairman
LIST OF ISO TC67 STANDARDS
With the adoption in CEN and in API
+
EN column:
It is important to note that the EN documents are also published as national documents in all the 30
other European countries members of CEN within the 6-month of the publication as EN, which is a
further step in our vision.
The mentioned documents are those which are technically identical to the corresponding ISO one;
they were accepted in Europe either through the parallel vote procedure or by Unique Acceptance
Procedure within the Vienna Agreement between CEN and ISO (ISO leader). All the documents are
part of CEN TC12 work programme except two which depend upon CEN TC 69. Some of them have
a different number in ISO and in CEN because, if the technical content is identical, their scope in
Europe excludes the gas supplies industries; they nevertheless have in their title the reference to the
ISO initial document with the mention :(modified).
Both standards which are issued by CEN TC69 concern our activity, fit with our vision and in addition
one ot them is also adopted back in API.
Note that in the EN document the main body of the standard is identical to the ISO one, but regional(s)
annexe(s) are added.
API column:
In this column are only indicated the API documents which have already been adopted back from the
ISO standards and for which, in the title, you find both references, the API one with the number of the
edition and the ISO one. You see that in the API catalogue both indications are mentioned. You may
also see in that list for some of them the mention “ ISO modified “ which has been added; it indicates
that some technical differences from the ISO document were included. Also note that all national
adoptions are, by definition, American National Standards(ANSI).
Three of the indicated documents in the API column are issued by another SDO (NACE) but concerns
our activity, fit with our vision and are adopted in CEN TC12.
Note that in the API document the main body of the standard is identical to the ISO one (except when
the mention modified is added), but regional(s) annexe(s) is(are) added as well as annex for the
monogram programme when it applies..
ISO 10426-1:2005 EN ISO 10426-1:2006 API Spec 10A 23rd edition / P&NGI – Cements and materials for well
(in revision) ISO 10426-1:2001 cementing - Part 1:Specification
(WI 204 for revision)
ISO 10428:1993 API Spec 11B P&NGI –-Sucker rods (pony rods,
(Fast Track) Also in progress in polished rods, couplings and sub-
(National Adoption under
CEN/TC 12 (WI 15) couplings) – Specification
(In revision) committee consideration)
ISO 10431:1993 PrEN ISO 10431 API Spec 11E P&NGI – Pumping units – Specification.
(Fast Track) in progress in CEN/TC 12 (National Adoption under
(In revision) (WI 16) committee consideration)
ISO 10438-1:2007 EN ISO 10438-1: 2007 API Std 614 Part 1 Petroleum, petrochemical and natural
(2nd edition) (2nd edition) 5th edition (pending gas industries – Lubrication, shaft sealing
publication) and control oil systems and auxiliaries -
Part 1: General requirements
EN ISO 10438-4:2007 API Std 614 Part 4 Petroleum, petrochemical and natural gas
ISO 10438-4 : 2007 ((2nd edition) 5th edition (pending industries – Lubrication, shaft sealing and
publication) control oil systems and auxiliaries Part 4:
(2nd edition) Self-acting gas seal support systems
ISO 11960:2004 EN ISO 11960:2004 P&NGI - Steel pipes for use as casing or
API Spec 5CT tubing for wells
(3rd edition) including (3rd edition) including 8th edition / ISO
corrig 1:2006 corrig 1:2006 11960:2004
(in revision) (in revision)
ISO 11961:1996 EN ISO 11961:1996 P&NGI - Steel pipes for use as drill pipe –
(in revision ) (in revision - WI 66) Specification
ISO 13533:2001 incl. API Spec16A 3rd P&NGI - Drilling and production equipment
EN ISO 13533:2001
Corrigendum 1 : 2005 edition / ISO - Drill through equipment
incl. Corrig. 1 : 2005
13533:2001 (modified)
ISO 13534:2000 EN ISO 13534:2000 API RP 8B P&NGI - Drilling and production equipment
(in revision ) 7th edition / ISO - Inspection, maintenance, repair and
(in revision - WI 186) 13534:2000 remanufacture of hoisting equipment.
ISO 13535:2000 EN ISO 13535:2000 API Spec 8C 4th P&NGI - Drilling and production equipment
edition / ISO – Hoisting equipment
(in revision) (in revision - WI 187) 13535:2000 (modified)
ISO 13623:2000 EN 14161:2003 P&NGI - Pipeline transportation systems
(in revision) (ISO 13623:2000 mod)
ISO 13628-1:2005 EN ISO 13628-1:2005 API RP 17A P&NGI - Design and operation of subsea
Amdt 1 & Amdt 2 in (Amdt 1 & Amdt 2 in production systems - Part 1:General
progress WI 215 & WI 4th edition / ISO requirements and recommendations
progress 13628-1:2005
238)
ISO 13628-11:2007 Adoption in progress API RP 17B PNGI -- Design and operation of subsea
(revision of ISO (National Adoption production systems –Part 11: Flexible pipe
10420:1994) under committee systems for subsea and marine
consideration) applications
ISO 13678:2000 incl. API RP 5A3 2nd P&NGI- Evaluation and testing of thread
Corrigendum 1:2005 revision as WI 197 edition / ISO compounds for use with casing, tubing and
(in revision) 13678:2000 line pipe
ISO 13703:2000 incl. EN ISO 13703:2000 P&NGI – Design and installation of piping
Corrigendum 1:2002 incl. Corrig. 1 : 2002 systems on offshore production platforms
API Std 530 P&NGI- Calculation of heater tube
EN ISO 13704:2007 5th edition / ISO thickness in petroleum refineries
ISO 13704:2007 13704:2001 (National
(2nd edition) (1st edition) Adoption under
committee consider.)
ISO 13706:2005 EN ISO 13706:2005 API Std 661 PP&NGI – Air-cooled heat exchangers
(2nd edition) (2nd edition) 6th edition / ISO
(in revision) (in revision) 13706:2005
ISO 13709:2003 EN ISO 13709:2003 API Std 610 Centrifugal pumps for petroleum,
10th edition / ISO petrochemical and natural gas industries
(in revision ) (in revision - WI 182) 13709:2003
Petroleum, petrochemical and natural gas
ISO 13710:2004 EN ISO 13710:2004 industries -- Reciprocating positive
displacement pumps
ISO 14693:2003 EN ISO 14693:2003 API Spec 7K 4th P&NGI – Drilling and well servicing
edition / ISO equipment
14693:2003 (modified)
ISO 14723:2001 EN ISO 14723:2001 API Spec 6DSS
1st edition / ISO P&NGI - Pipeline Transportation Systems -
(in revision) (in revision) 14723:2001 ( modified) Subsea pipeline valves
ISO 15156-3:2003 EN ISO 15156-3: 2003 P&NGI – Materials for use in H2S
Including Including (NACE MR 0175/ containing environments in oil and gas
Corrigendum.1:2005 Corrigendum.1:2005 ISO 15156-3:2003 production – Part 3:Cracking resistant
& Corrig. 2:2005 & Corrig. 2:2005 CRAs (corrosion-resistant-alloys) and other
alloys.
ISO 16812:2007 EN ISO 16812:2007 API Std 660 P&NGI –Shell and tube heat exchangers
8th edition / ISO
2nd edition 2nd edition 16812:2007
P&NGI – Drilling & Production equipment –
ISO 17078-1:2004 EN ISO 17078-1:2004
Part 1: Side pocket mandrels
API Std 682 3rd edition Pumps - Shaft sealing systems for
ISO 21049:2004 EN ISO 21049:2004
/ ISO 21049:2004 centrifugal and rotary pumps.
ISO 23251:2006 EN ISO 23251:2007 API Std 521 PP&NGI – Pressure-relieving and
Amdt 1 in progress Amdt 1 in progress 5th edition / ISO depressuring systems
(in revision) (in revision: WI 212) 23251:2006
Other ISO TC
ISO CEN API TITLE
ISO 7507-3:2006 API MPMS Chapter Petroleum and liquid petroleum products -
(FROM ISO TC 28 2.2C 1st edition Calibration of vertical cylindrical tanks- Part
SC3) 3: Optical-triangulation method
ISO 10425:2003 API Spec 9A 25th Steel wire ropes for the Petroleum and
(FROM ISO TC 105) edition / ISO Natural Gas Industries – minimum
10425:2003 requirements and terms of acceptance