Escolar Documentos
Profissional Documentos
Cultura Documentos
User Manual
UD01666B
User Manual of iVMS-5200 Professional Video Wall Client Software
User Manual
COPYRIGHT © 2016 Hangzhou Hikvision Digital Technology Co., Ltd.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties,
The Manual includes instructions for using and managing the product. Pictures, charts, images and all
other information hereinafter are for description and explanation only. The information contained in
the Manual is subject to change, without notice, due to firmware updates or other reasons. Please
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned below are the properties of their
respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
1
User Manual of iVMS-5200 Professional Video Wall Client Software
OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT
YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE
APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
2
User Manual of iVMS-5200 Professional Video Wall Client Software
Contents
Chapter 1 Overview.......................................................................................................................... 4
1.1 Description ...................................................................................................................... 4
1.2 Running Environment ...................................................................................................... 4
1.3 Function Modules ............................................................................................................ 4
Chapter 2 Login ................................................................................................................................ 6
Chapter 3 Start Wizard ..................................................................................................................... 8
Chapter 4 Configuring Video Wall Settings ...................................................................................... 9
Chapter 5 Displaying Video on Video Wall ..................................................................................... 11
Chapter 6 Configuring Plan ............................................................................................................ 16
Chapter 7 Configuring Video Wall Screens ..................................................................................... 18
Chapter 8 Alarm Information ......................................................................................................... 19
Chapter 9 Log Search ..................................................................................................................... 20
Chapter 10 System Configuration..................................................................................................... 22
3
User Manual of iVMS-5200 Professional Video Wall Client Software
Chapter 1 Overview
1.1 Description
iVMS-5200 Video Wall Client Software is module of iVMS-5200 Professional (hereafter simplified as
iVMS-5200 Pro) for configuring the video wall settings. Video Wall Client Software (hereafter
simplified as client) provides multiple operating functionalities, including scene and plan control,
video playback, configuring virtual LED and background picture, screen control, and so on.
This user manual describes the function, configuration and operation steps of iVMS-5200 Video Wall
Client Software. To ensure the proper usage and stability of the client, please refer to the contents
below and read the manual carefully before operation.
4
User Manual of iVMS-5200 Professional Video Wall Client Software
Menu Bar:
File Exit Exit the iVMS-5200 Control Client.
Lock screen operations. Or you can click in the
Lock upper-right corner to lock. Click Unlock and input the
System
password to unlock.
Switch User Switch the login user.
Provide the function of video wall settings and displaying
Video Wall the video stream from the encoding devices can be
decoded and displayed on the Video Wall.
Provide the configuration for the screens of the video
View
Screen Control wall, such as screen type, opening screen, closing screen,
input source and image parameters.
Provide the configuration of the file saving paths and
System Configuration
auto-login.
Tool Log Search Open the Log Search page.
Open Video Wall Wizard Open the wizard for the video wall configuration
Click to open the User Manual; you can also open the User
Help User Manual
Manual by pressing F1 on your keyboard.
About View the basic information of the client software.
The iVMS-5200 Control Client is composed of the following tabs:
The Video Wall module provides the function of video wall settings and
Video Wall displaying the video stream from the encoding devices can be decoded
and displayed on the Video Wall.
The Screen Control module provides the configuration for the screens of
Screen Control the video wall, such as screen type, opening screen, closing screen, input
source and image parameters.
The System Configuration module provides the configuration of the file
System Configuration
saving paths and auto-login.
The function modules are easily accessed by clicking the tabs or by selecting the function module
from the View or Tool menu.
You can check the information, including current user, network usage, CPU usage, RAM usage and
time, in the upper-right corner of the main page.
5
User Manual of iVMS-5200 Professional Video Wall Client Software
Chapter 2 Login
When opening iVMS-5200 Video Wall Client Software, you can login with the user name and
password of iVMS-5200 Pro.
Two kinds of user (normal user and domain user) are supported for accessing the iVMS-5200 Pro.
Please refer to the User Manual of iVMS-5200 Professional Web Client for the detailed introduction.
Option 1: Login with Normal User
Steps:
The default password (12345) for the Admin account is for first-time log-in purposes only.
You must change this default password to better protect against security risks, such as the
unauthorized access by others to the product that may prevent the product from
functioning properly and/or lead to other undesirable consequences. Please login the
iVMS-5200 Professional via Web Client to change the password.
For your privacy, you must change the password to something of your own choosing (using
a minimum of 8 characters, including upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
3. (Optional) Check the checkbox Remember Password to keep the password.
4. (Optional) Check the checkbox Auto-login to log into the software automatically.
5. Set the address and port No. of the CMS.
Note: If these fields are not displayed, click Show Server Address to show them. You can also
click Hide Server Address to collapse these fields.
In the drop-down list, input the address of the CMS that you want to connect to.
In the text field, input the port No. of the CMS. By default, it’s 80.
6. Click Login to enter the client.
6
User Manual of iVMS-5200 Professional Video Wall Client Software
7
User Manual of iVMS-5200 Professional Video Wall Client Software
Steps:
1. The software provides a default video wall view which is 4X4. You can edit the name, row
number and column number for the video wall. You can also click-and-drag your mouse to set
the needed video wall.
2. Click Next to configure the output linkage with the video wall.
3. Click-and-drag the decoding output on the left-side list to the display window of video wall, to
configure the one-to-one correspondence. You can also click and hold the Ctrl or Shift key to
select multiple outputs and then drag them to the video wall for configuring linkage in batch.
4. (Optional) You can select an output and click to edit its parameters. You can check the
checkbox of Batch Configuration and select other outputs to copy the settings to. You can click
and select the decoding device for showing the output No. of the decoding output for easily
locating the output on the physical video wall.
Note: For HDMI and VGA outputs, the resolution can be configured; for BNC output, the video
standard can be configured.
5. Click Done to complete the wizard.
After configuring the wizard, you can display the video on the video wall. Please refer to Chapter 5
Displaying Video on Video Wall.
8
User Manual of iVMS-5200 Professional Video Wall Client Software
Steps:
1. On the Video Wall page, a default video wall view with the window division of 4*4 is provided.
Click and select Modify Video Wall to edit the existing video wall.
2. In the pop-up window, you can edit the name, row number, column number and proportion of
the video wall as desired.
3. Click-and-drag the decoding output on the left-side list to the display window of video wall, to
configure the one-to-one correspondence. You can also click and hold the Ctrl or Shift key to
select multiple outputs and then drag them to the video wall for configuring linkage in batch. You
can select a linked display window and click Cancel to release the linkage, or click Cancel All to
release all the linked windows.
4. (Optional) You can select an output and click to edit its parameters. You can check the
checkbox of Batch Configuration and select other outputs to copy the settings to. You can click
and select the decoding device for showing the output No. of the decoding output for easily
locating the output on the physical video wall.
Notes:
Only 1 video wall can be added to the client software.
The total number of the display windows of the video wall should be no more than 16*20.
The range of the row number is between 1 and 16, and column number is between 1 and
20.
5. Click Edit or Add to save the settings.
Configuring Background
Purpose:
You can upload pictures for showing as the background of the video wall.
Note: The function should be supported by the decoding device.
Steps:
1. Select a video wall and click Background Picture.
2. Click to select a picture file from your PC and click OK to upload the picture.
3. Click-and-drag the background picture item to the desired position of the video wall and a
background window displays. You can move the window when the cursor becomes and
adjust its size when the cursor becomes directional arrow.
4. Check the checkbox of Show to show the background picture on the physical video wall.
9
User Manual of iVMS-5200 Professional Video Wall Client Software
Purpose:
You can display the required contents on the video wall by using virtual LED.
Note: The function should be supported by the decoding device.
Steps:
1. Select a video wall and click Virtual LED.
2. In the Current Virtual LED field, input the content that you want to display on the video wall.
3. Click Configuration and set the following parameters.
Show Mode: Select the mode of the virtual LED as desired.
Font Size: Set the size of the displayed text.
Font Color: Set the color of the displayed text by clicking Color.
Background Color: Set the color of the background by clicking Color.
Moving Mode: Set the scrolling effect for the displayed text.
Moving Direction: Set the scrolling direction for the displayed text.
Moving Speed: Set the moving speed for the displayed text.
4. Click-and-drag the virtual LED item to the desired position of the video wall and a virtual LED
window displays. You can move the window when the cursor becomes and adjust its size
when the cursor becomes directional arrow.
5. Click Show or Hide to display or hide the virtual LED on the physical video wall.
Configuring Logo
Purpose:
You can upload a picture as the logo to display it on the physical video wall.
Note: The function should be supported by the decoding device.
Steps:
1. Select a video wall and click Logo.
2. Click to select a picture file from your PC and click OK to upload the picture.
3. In the Position X and Position Y field, input the x-coordinate and y-coordinate value to display
logo at desired position of the video wall.
4. Check the checkbox of Show to show the logo on the physical video wall. You can check the
checkbox of Flashing to display the flashing logo on the physical video wall.
10
User Manual of iVMS-5200 Professional Video Wall Client Software
Steps:
1. Click Scene to display the scene panel. Click to add a new scene. You can click to edit
the name for the scene, click to delete the scene.
2. Click-and-drag the camera on the signal source panel to the display window of video wall. The
video stream from the camera will be decoded and displayed on the video wall. You can also
select a decoding window and then double-click a camera to decode and display the video. You
can also click and hold the Ctrl or Shift key to select multiple cameras and then drag them to the
video wall.
3. Select a display window which is linked with signal source, the video of the signal source displays
on the window in the lower panel of the interface. You can also directly drag a camera to the
preview window for live view.
4. Select a decoding window and click to set the window division for it. Then the screen can
display multiple videos.
5. Click to save the settings to the scene. In this way, you can easily view the required live
videos on the video wall by calling this scene (click the of the corresponding scene). You can
also click to save the current settings to other scene.
The following icons are available on the video wall interface:
Start the decoding and display for all the windows.
Stop the decoding and display for all the windows.
Close all the windows that are decoding and displaying video.
Open a new window on the screen(s). The window can be within a screen
or span multiple screens.
Refresh the decoding status.
Click to set the auto-switch interval and the video stream of the
cameras from the same group will switch automatically in a selected
display window.
Record the video of the selected window.
Capture the picture of the selected window.
Set window division for the selected window.
Always stick the window at the bottom layer.
Lock the window to disable the roaming function.
Display the window in full-screen mode.
11
User Manual of iVMS-5200 Professional Video Wall Client Software
Purpose:
Windowing is to open a new window on the screen(s). The window can be within a screen or span
multiple screens. You can move the playing window within the video wall as desired and this function
is called roaming.
Note: The windowing and roaming function should be supported by the decoding device.
Steps:
1. Select a signal source for opening window.
2. Click and then click-and-drag on a screen which links to a decoding output to open a
window. The window can be within a screen or span multiple screens. If you want to open a
window on the opened window, click-and-drag and hold the Ctrl key to create one. And for the
locked window (refer to step 6), you can click-and-drag to create a new window on it.
3. You can move the window when the cursor becomes and adjust its size when the cursor
becomes directional arrow. You can also hold the Shift key to scale the window in proportion.
The window will be adjusted to align with the borders if it is moved to the location near the
border of the screen.
4. Double-click the window and it will enlarge to fill the spanning screens and display on the top
layer. You can double-click again to restore.
5. (Optional) Select a window and click to set the window division for it.
6. Select a window and click to disable the roaming function, and the icon shows on the
top-right corner of the window. In this way, the window cannot be moved and resized. You can
click again to recover the roaming function.
12
User Manual of iVMS-5200 Professional Video Wall Client Software
7. Select the roaming window and click , or move the mouse to the window and click in the
upper-right corner to stop the decoding of the window and it will be closed. You can also
click to close all the roaming windows.
PTZ Control
Purpose:
If the decoded camera supports PTZ control, you can pan, tilt or zoom the camera, call the defined
presets of the camera, and operate other PTZ control.
Note: This function should be supported by the camera.
Steps:
1. Click-and-drag the camera on the left-side list to the display window of video wall, or you can
open a window if supported.
2. Click to display the PTZ control panel.
Zoom
Focus
Iris
PTZ Speed
Light
Wiper
4. If the camera has predefined presets, you can click to select the preset and click the icon to
call it, and the camera will move to the predefined image position which contains information of
pan, tilt, zoom, focus and other parameters.
Configuring Playback
Purpose:
13
User Manual of iVMS-5200 Professional Video Wall Client Software
Purpose:
The cycle decoding refers that you can configure multiple video streams of encoding devices to one
decoding output and you can set the switching interval for the decoding.
Note: The cycle decoding is only supported by decoding device.
Steps:
1. Click-and-drag the camera on the left-side list to the display window of video wall, or you can
open a window if supported.
2. Click-and-drag a group to the window.
3. Click beside and set the switching interval for the cycle decoding and click to start
cycle decoding. You can view the cycle decoding on the physical video wall. You can click to
stop the cycle decoding.
Window Configuration
Purpose:
You can set the window as the alarm window to display the video triggered by event or alarm input
on video wall, you can also set the decoding delay, image parameters.
Note: The function should be supported by the decoding device.
Steps:
1. Click-and-drag the camera on the left-side list to the display window of video wall, or you can
open a window if supported.
2. Click Window Configuration to pop up the configuration dialog box.
14
User Manual of iVMS-5200 Professional Video Wall Client Software
3. Configure the parameters as needed. The window status shows the current status of the selected
window.
Alarm Window: Display the video triggered by event or alarm input on the selected window
of the video wall.
Decoding Delay: Set the delay status of the decoding according to the actual needs.
Fluent Video: Enable this function to increase the frame rate of the video for playing the
video more smoothly.
3D DNR: Enable this function to reduce the noise in the video stream
Defog: Enable this function when the environment is foggy and the image is misty. It
enhances the subtle details so that the image appears clearer.
Low Illumination: Enable this function
Note: Some functions should be supported by the decoding device.
4. Click OK to save the settings.
Decoding Status
Purpose:
The decoding status of the select window can be checked. You can view the window No., video
stream, resolution, frame rate, and so on.
Steps:
1. Click-and-drag the camera on the left-side list to the display window of video wall, or you can
open a window if supported.
2. Click Decoding Status to pop up the window. You can check the decoding status of the selected
window. Click Refresh and you can get the latest status.
15
User Manual of iVMS-5200 Professional Video Wall Client Software
16
User Manual of iVMS-5200 Professional Video Wall Client Software
17
User Manual of iVMS-5200 Professional Video Wall Client Software
2. Click-and-drag on the video wall to select the screen(s) and configure the parameters for them:
Serial Port Protocol: Select the serial port that the screen uses.
Screen Protocol: Select the type for the selected screens since different screen types adopt
different communication protocols.
Screen Control: Operate the screen(s). You can open or close the selected screens. Or open
or close all the screens.
Input Source: Select the input source for the screen and click Save to save the settings.
Image Parameters: Click or to adjust the brightness, contrast, saturation or
definition for the screen(s).
Image Position: Click or to adjust the image position on the screen(s).
18
User Manual of iVMS-5200 Professional Video Wall Client Software
19
User Manual of iVMS-5200 Professional Video Wall Client Software
Purpose:
20
User Manual of iVMS-5200 Professional Video Wall Client Software
21
User Manual of iVMS-5200 Professional Video Wall Client Software
22
User Manual of iVMS-5200 Professional Video Wall Client Software
23