Escolar Documentos
Profissional Documentos
Cultura Documentos
1.True or False
The 10.1.1.2 IP address in the returned result of the frame relay command represents
the IP address of the local device.
[RTA]dis fr map-info
Map Statistics for interface Serial0 (DTE)
DLCI = 100, IP INARP 10.1.1.2, Serial0
create time = 2007/06/04 17:34:59, status = ACTIVE
encapsulation = ietf, vlink = 20, broadcast
√ ×
Correct answer:
×
2.True or False
If the optimal path to the destination IP address is unavailable after a change occurs
in a network topology, the dynamic routing protocol can make adaptation to this
change and determine another optimal path to the destination IP address.
√ ×
Correct answer:
√
3.True or False
The PPP protocol provides a standard method of transmitting datagrams of different
protocols on a point-to-point link. It is a point-to-point communication protocol
widely used at the present time.
√ ×
Answers of examinees:√ Correct answer
Correct answer:
√
4.True or False
Frame relay point-to-multipoint sub-port can connect “multiple” remote nodes
together through a PVC.
√ ×
Correct answer:
×
5.True or False
RTA connects with RTB through interface Serial0. The configuration on RTA is as
follow:
[RTA]aaa
[RTA-aaa]local-user huawei password simple quidway
[RTA-aaa]local-user huawei service-type ppp
[RTA]interface Serial 0
[RTA-Serial0]link-protocol ppp
[RTA-Serial0]ppp authentication-mode pap
[RTA-Serial0]ip address 10.1.1.1 30
The configuration on RTB is as follow:
[RTB]interface Serial 0
[RTB-Serial0]link-protocol ppp
[RTB-Serial0]ppp pap local-user huawei password simple hello
[RTB-Serial0]ip address 10.1.1.2 30
With the configuration above, RTA and RTB are able to communicate with each
other.
√ ×
6.True or False
On a port running frame relay, an MAP table corresponds to a logical port. Different
logical ports have different MAP tables.
√ ×
Correct answer:
√
7.True or False
In broadcast network of OSPF protocol, any two DR Others will neither exchange
routing information nor send Hello packet to each other due to the existence of DR.
√ ×
Correct answer:
×
8.True or False
RTA connects with RTB through interface Serial0. The configuration on RTA is as
follow:
[RTA]aaa
[RTA-aaa]local-user huawei password cipher hello
[RTA-aaa]local-user huawei service-type ppp
[RTA]interface Serial 0
[RTA-Serial0]link-protocol ppp
[RTA-Serial0]ppp authentication-mode chap
[RTA-Serial0]ip address 10.1.1.1 30
The configuration on RTB is as follow:
[RTB]interface Serial 0
[RTB-Serial0]link-protocol ppp
[RTB-Serial0]ppp chap user huawei
[RTB-Serial0]ppp chap password cipher hello
[RTB-Serial0]ip address 10.1.1.2 30
With the configuration above, RTA and RTB are able to communicate with each
other.
√ ×
Correct answer:
√
9.True or False
After a fault occurs in a network, a static route can be rectified automatically and the
network administrator does not need to reconfigure it.
√ ×
Correct answer:
×
10.True or False
The operation deleting the configuration files saved in the storage devices will
become effective after rebooting the router.
√ ×
Correct answer:
√
11.True or False
After receiving a data frame from any port, a hub forwards it to any other port.
√ ×
Correct answer:
√
12.True or False
Root bridges provide root ports and designated ports.
√ ×
Correct answer:
×
13.True or False
One of the significant features of the PPP protocol is the authentication function.
With this function, the two ends of a link can negotiate with each other to use which
authentication protocol and then perform authentication. A PPP connection is
established only when the authentication is successful.
√ ×
Correct answer:
√
14.True or False
The ICMP protocol (RFC792) is not applied to Application Layer but Network
Layer.
√ ×
Correct answer:
√
15.True or False
A static route can be either configured manually by a network administrator or
generated automatically.
√ ×
Correct answer:
×
16.True or False
Each router forwards only the packets received by the local station through the
optimal path. The packet is forwarded by different routers on the path in a relay
mode.
√ ×
Correct answer:
√
17.True or False
Routing Information Protocol (RIP) is available in the RIPv1, RIPv2, and RIPv3
versions.
√ ×
Answers of examinees:× Correct answer
Correct answer:
×
18.True or False
When you configure Frame Relay on Quidway routers, you can configure Inverse
ARP instead of static address mapping because the function of Inverse ARP is to
provide dynamic address mapping.
√ ×
Correct answer:
√
19.True or False
In OSPF protocol, most of the packets are sent by using reserved multicast address
and this can reduce the impact on non-OSPF speaking devices.
√ ×
Correct answer:
√
20.True or False
A Trunk port always sends tagged frames to the peer equipment.
√ ×
21.Single
Which of the following standards is defined by IEEE to regulate the implementation
of VLAN between switches?
a.802.1x
b.802.1d
c.802.1q
d.802.3
Correct answer:
c
22.Single
The subnet mask of a class A address is 255.255.240.0. How many bits are used for
sub-netting?
a.4
b.5
c.9
d.12
Correct answer:
d
QuestionScore:(2.0) Current Score: 2.0
23.Single
A backbone OSPF area is responsible for releasing the information collected by each
border router to non-backbone OSPF areas. Which of the following represents the ID
of a backbone OSPF area?
a.area 0
b.area 1
c.area 0.0.0.1
d.area 0.0.0.2
Correct answer:
a
24.Single
Each router only knows how to forward the packet to the next hop IP address. It
doesn't know the end to end forwarding path. This type of forwarding is called ( )
Correct answer:
a
a.255.255.255.240
b.255.255.255.248
c.255.255.255.224
d.255.255.255.252
Correct answer:
a
26.Single
Which of the following is the broadcast MAC address?
a.FF-FF-FF-FF
b.FF-FF-FF-FF-FF-FF
c.00-00-00-00-00-00
d.00-00-00-FF-FF-FF
Correct answer:
b
27.Single
The incoming and outgoing packets of a mirrored port are copied to another port.
Which of the following objects is this type of mirror action based on?
a.Link
b.Equivalence
c.Flow
d.Port
Correct answer:
d
28.Single
Which of the following is the default TCP port number used by HTTP?
a.80
b.8080
c.110
d.25
Correct answer:
a
29.Single
Suppose a gateway is configured in a host running Windows system, which of the
following is similar to the configuration on a router?
a.Direct route
b.Default route
c.Dynamic route
d.Host route
Correct answer:
b
30.Single
172.16.10.32/24 is ( )
a.Network address
b.Host address
c.Multicast address
d.Broadcast address
Correct answer:
b
31.Single
Which of the following protocols is a transport-level protocol based on TCP,
translates a domain name into an IP address, and manages domain names in a
distributed manner?
a.TCP
b.UDP
c.DNS
d.HTTP
Correct answer:
c
32.Single
Which of the following standard organizations has defined the protocol for LAN
such as 802 series protocols?
a.IEEE
b.ITU-T
c.IETF
d.ETSI
Correct answer:
a
33.Single
Which of the following is the abbreviation for ICMP?
Correct answer:
d
34.Single
What is the main function of DNS?
b.Remote Access
c.File Transfer
d.Mail Transfer
Correct answer:
a
35.Single
A MAC address consists of 48 bits and is generally expressed in 12-bit dotted
decimal notation. What kind of address does a MAC address consisting of all 1s
stand for?
a.Multicast address
b.Broadcast address
c.Unicast address
d.Virtual address
Answers of examinees:b Correct answer
Correct answer:
b
36.Single
Which of the following protocol is used by RIP to encapsulate the messages?
a.UDP
b.TCP
c.ICMP
d.Raw IP
Correct answer:
a
37.Single
Which of the following is used by routers to forward the packets on the network?
a.DNS lookups
b.ARP tables
c.Routing tables
38.Single
In OSI reference model, Transport Layer is located at layer ( ).
a.3
b.4
c.6
d.7
Correct answer:
b
39.Single
The data link layer in a router receives a packet from upper layer and the length of
the packet is greater than the MTU of the interface that will transmit this packet.
What will the router do?
Correct answer:
b
QuestionScore:(2.0) Current Score: 2.0
40.Single
A series of packets are used in a Ping test to determine whether delay and packet loss
occur in communication. Which of the following represents the packet used in a Ping
test?
a.FTP
b.Tracert
c.ICMP
d.Telnet
Correct answer:
c
41.Single
OSPF takes the precedence to select ( ) as a router ID unless you specify a router ID
manually.
c.127.0.0.1
Correct answer:
a
a.ISO
b.IEEE
c.ITU
d.IETF
Correct answer:
a
43.Single
Which transport-level protocol does Telnet use?
a.TCP
b.UDP
c.ECMP
d.UCMP
Correct answer:
a
44.Single
When an IP address is 220.32.59.128/25, which of the following represents the
network address?
a.220.32.59.192
b.220.32.59.128
c.220.32.59.254
d.220.32.59.0
Correct answer:
b
45.Single
Which of the following descriptions about blocking state in STP is incorrect?
b.The port in blocking state does not learn source MAC address of data packet
d.The port in blocking state does not receive any data packets
Correct answer:
d
46.Multiple Choice,
FTP session consists of two types of connections, they are( )
a.Output connection
b.Input connection
c.Control connection
d.Data connection
Correct answer:
cd
47.Multiple Choice,
Which of the protocols are commonly used at the Data Link Layer of a WAN?
a.802.2
b.802.4
c.HDLC
d.PPP
Correct answer:
cd
48.Multiple Choice,
OSPF routers are classified into four types. Which of the following statements about
interior routers (IRs) are true?
Correct answer:
ad
49.Multiple Choice,
Which of the following statements regarding the function of a router are correct?
d.Addressing
Correct answer:
bcd
50.Multiple Choice,
Which of the following descriptions about trunk port are correct?
Correct answer:
bd
51.Multiple Choice,
Which of the following packets belong to CHAP authentication protocol?
a.Challenge
b.Request
c.Response
d.Success
e.Failure
Correct answer:
acde
52.Multiple Choice,
Which of the following descriptions about VRRP priority are correct?
a.The owner of Virtual IP address always uses 255 as running priority despite of
its configured priority
b.The owner of Virtual IP address always uses 0 as running priority despite of its
configured priority
c.A router with VRRP priority 0 will not take part in master election and can
permanently act as slave.
d.When the master of VRRP stop running VRRP, the router will send a VRRP
notification packet whose priority field is 0
Correct answer:
ad
53.Multiple Choice,
Which of the following statements about RIP protocol priorities are true?
b.A greater value of the RIP routing protocol priority means a higher priority.
Correct answer:
acd
54.Multiple Choice,
Which of the following statements regarding RIP are correct?
a.RIP is an IGP.
b.RIP is an EGP
Correct answer:
ac
55.Multiple Choice,
Which of the following statements regarding static route are correct?
b.Some of the dynamic routing protocol such as OSPF can generate default
routes.
c.Default route is used when the destination network is not in the routing table.
d.The network IP and mask of the default route is 0.0.0.0 and 0.0.0.0
respectively.
Correct answer:
bcd