Escolar Documentos
Profissional Documentos
Cultura Documentos
www.tugtech.com
+1.770.422.7230 1995 Duncan Dr. NW | Kennesaw | GA 30144
sales@tugtech.com
Dimensions
Length............................................................300“ (7620 mm)
Drive Axle Suspension
Type..................................Dana 60 Series limited Front ...........Solid mount
Width excluding side bumpers.............78“ (1981.2 mm) Rear...............Solid mount
slip differential
Height.............................................................59.5“ (1498.6 mm)
Gear ratio.........................7.17:1 Instruments
Wheelbase ....................................................109“ (2794.0 mm) Dash Battery discharge, hour meter and fault
Suspension......................Solid mount indicator.
Conveyor length less front bumper.......94“ (7467.6 mm)
Capacity.............................6000 lb (2721.1 kg)
Conveyor width less guide rails...............34“ (863.6 mm)
Conveyor capacity at full incline..............1000 lb (453 kg) Drive Shaft
At 17° or less elevation................................2000 lb (907 kg) Type....................................Double universal,
Belt width.........................................................24“ (609.6 mm) sliding spline coupling connecting reducer to drive axle. Partial List of Options
• Extended belt length
Door sill compatibility..................................40 to 170“ Brakes • Guard rails
(1016.0 to 4318.0 mm) Conveyor speed...45-60 fpm System..............................Dual split system • Adjustable spot light
(13.7 to 18.2 mpm) with hydraulic assist • Narrow conveyor width for Boeing 777
Compatibility—31.5” (800.1 mm)
Gross vehicle weight....................................6680 lb (3030.0 kg) Front..................................Disc • Emergency belt stop
Rear....................................Drum • 72/80-volt DC battery
Electrical Component Information Parking .............................Lever operated, drum type • Others available upon request
Motor....................................72/80-volt DC traction motor, high Steering System
torque capacity with series wound coils. Large brushes and Type...................................Orbitrol-operated hydraulic
commutator protect against heavy overload conditions. cylinder (hydrostatic steering)
Motor enclosed in a splash-proof casing.
Hydraulic System
Controls.............................Sevcon Power Pal Mosfet controls 72/80-V electric motor-powered pump
with a 12-volt DC converter to power standard automotive System Pressure...............1500 psi max
accessories. Filter......................................Return line with
Battery................................Powered by a 72/80-volt DC element condition indicator
battery. Battery not included. Conveyor..................Hydraulic belt drive and conveyor lift/lower.
Specifications are subject to change without notice. Models shown may include optional features. 660E/1031 Rev. 5/14
www.tugtech.com
+1.770.422.7230 1995 Duncan Dr. NW | Kennesaw | GA 30144
sales@tugtech.com