Escolar Documentos
Profissional Documentos
Cultura Documentos
PICTROGRAPHY SERIES
Internal LUT Version Upgrading Procedure/
Plug-in LUT Operating Procedure
First Edition
PP3-B601E
INTRODUCTION
• This instruction manual explains the operating procedures and precautions for the new
LUTs for the PICTROGRAPHY 3500 / 4000 Ⅱ / 4500 / 4500N and the new plug-in LUTs
for the PICTROGRAPHY 3000 / 4000 and PICTROSTAT Digital 400.
• To correctly use and obtain optimum performance from the PICTROGRAPHY / PIC-
TROSTAT, it is essential that you read this manual thoroughly before using the
machine.
• Store this manual at a predetermined place near the PICTROGRAPHY / PICTROSTAT
so that you can readily refer to it regarding specific operating or handling procedures.
2 Internal LUT Version Upgrading Procedure (PICTROGRAPHY 3500 / 4000 Ⅱ / 4500 / 4500N) ......... 6
2.1 Preparation for Version Upgrade .............................................................................. 6
2.1.1 Confirmation of Current LUT Version ........................................................................... 6
2.1.2 Confirmation of Folder Configuration in CD-ROM and Selection of File ...................... 8
2.2 Internal LUT Version Upgrading Procedure............................................................. 18
2.2.1 Windows + SCSI Connection (PICTROGRAPHY 3500 / 4000 Ⅱ / 4500) ................... 18
2.2.2 Windows + PNA Connection (PICTROGRAPHY 3500 / 4000 Ⅱ / 4500) .................... 22
2.2.3 MacOS + SCSI Connection (PICTROGRAPHY 3500 / 4000 Ⅱ / 4500) ..................... 26
2.2.4 MacOS + PNA Connection (PICTROGRAPHY 3500 / 4000 Ⅱ / 4500)....................... 30
2.2.5 MacOSX + SCSI Connection (PICTROGRAPHY 3500 / 4000 Ⅱ / 4500) ................... 34
2.2.6 MacOSX + PNA Connection (PICTROGRAPHY 3500 / 4000 Ⅱ / 4500) .................... 38
2.2.7 Windows + PICTROGRAPHY 4500N .......................................................................... 43
2.2.8 MacOS + PICTROGRAPHY 4500N............................................................................. 47
2.2.9 MacOSX + PICTROGRAPHY 4500N .......................................................................... 51
2.3 Operation After Version Upgrade.............................................................................. 56
3 Plug-in LUT Operating Procedure (PICTROGRAPHY 3000 / 4000 / PICTROSTAT DIGITAL 400) ...................... 57
3.1 Selection of Plug-in LUT ............................................................................................ 57
3.1.1 Windows ..................................................................................................................... 57
3.1.2 MacOSX ...................................................................................................................... 59
3.2 Functions on the “LUT Settings” Screen ................................................................. 61
3.2.1 Windows ...................................................................................................................... 61
3.2.2 MacOSX....................................................................................................................... 63
3
1
は
め
込
み
、
フ
レ
┃
ム
︱
文
字
入
れ
プ
リ
ン
ト
4
1 Purpose of LUT Improvement and Types of New LUT
The LUT for the PICTROGRAPHY 3500 / 4000Ⅱ/ 4500 / 4500N has been improved to sup-
port a new-type donor. By installing the new LUT into these models, the user can make
prints with improved color balance and gray gradation. Consequently, almost no retouching
is required for making prints from DSC and sRGB image data.
However, the new LUT does not ensure the compatibility with the prints made by using
older versions of LUTs. Accordingly, even after installing the new LUT, returning to the pre-
vious (old) LUT might be necessary due to a color balance problem, etc. For this reason,
before installing the new LUT, confirm and write down the version of the old LUT currently
installed into the PICTROGRAPHY. If returning to the old LUT is required after installing the
new LUT, install the previously-installed LUT. The following versions of LUTs are provided.
4
1.2 Plug-in LUT
The plug-in LUT for the PICTROGRAPHY 3000 / PICTROGRAPHY 4000 / PICTROSTAT
Digital 400 has been improved to support a new-type donor. This new LUT is used for
obtaining print results (gradation, color balance and gray balance) similar to conventional
ER prints even when using the new donor. The user can also adjust the setting of the new
plug-in LUT. The following types of plug-in LUTs are provided.
5
2 Internal LUT Version Upgrading Procedure (PICTROGRAPHY 3500 / 4000ⅡⅡ/ 4500 / 4500N)
Before installing the new LUT, confirm and write down the version of the LUT currently installed into
the PICTROGRAPHY.
ON LINE
ESC
PREV
NEXT
SEL
2 Press the [SEL] key.
Ⅱ/4500N>
<PICTROGRAPHY 4000Ⅱ
Print Count 123
ESC
PREV
NEXT
SEL
3 PICTROGRAPHY 3500 / 4500:
Press the [NEXT] key twice.
PICTROGRAPHY 4000Ⅱ Ⅱ / 4500N:
Press the [NEXT] key once.
6
Press the [SEL] key.
ESC
PREV
NEXT
SEL 4
• The message changes to “PRD Ver.X.XX” (PIC-
<PICTROGRAPHY 3500> TROGRAPHY 3500) or “PIC Ver.X.XX” (PIC-
PRD Ver.X.XX TROGRAPHY 4000Ⅱ / 4500 / 4500N).
Ⅱ/4500/4500N>
<PICTROGRAPHY 4000Ⅱ
PIC Ver.X.XX
ESC
PREV
NEXT
SEL
5 Press the [NEXT] key.
[ ]
LUT - 3D-LUT +
NEXT
SEL 6
• The message changes to “1 Ver.X.XX”. This ver-
sion number “X.XX” is used for selecting the
[ ]
1 + Ver.X.XX
appropriate folder when installing the new LUT
or returning to the previous LUT. Write down this
version.
7
2.1.2 Confirmation of Folder Configuration in CD-ROM and Selection of File
The program file necessary for installing a LUT varies depending on the purpose of operation, oper-
ating system of the host computer, model of the PICTROGRAPHY and connection method. Select
an appropriate file in the CD-ROM referring to the following:
Windows
PICTROGRAPHY 3500
PGUP.exe
PG3500 LUT V200 English
PGVU_TCP.exe
PGUP.exe
Firmware LUT V102 English
PGVU_TCP.exe
PGUP.exe
LUT V104 English
PGVU_TCP.exe
PGUP.exe
LUT V105 English
PGVU_TCP.exe
PGUP.exe
Program English
PGVU_TCP.exe
Folder Configuration related to PICTROGRAPHY 3500
Purpose of PICTROGRAPHY
File Selection Method (“XXX” represents folder name.)
Installation Connection Method
Upgrading to New SCSI Connection “PG3500” → “LUT V200” → “English” → PGUP.exe
LUT Ver.2.00
PNA Connection “PG3500” → “LUT V200” → “English” → PGVU_TCP.exe
Returning to Old SCSI Connection “PG3500” → “Firmware” → “LUT V102” → “English” → PGUP.exe
LUT Ver.1.02
PNA Connection “PG3500” → “Firmware” → “LUT V102” → “English” → PGVU_TCP.exe
Returning to Old SCSI Connection “PG3500” → “Firmware” → “LUT V104” → “English” → PGUP.exe
LUT Ver.1.04
PNA Connection “PG3500” → “Firmware” → “LUT V104” → “English” → PGVU_TCP.exe
Returning to Old SCSI Connection “PG3500” → “Firmware” → “LUT V105” → “English” → PGUP.exe
LUT Ver.1.05
PNA Connection “PG3500” → “Firmware” → “LUT V105” → “English” → PGVU_TCP.exe
Upgrading system SCSI Connection “PG3500” → “Firmware” → “Program” → “English” → PGUP.exe
software
PNA Connection “PG3500” → “Firmware” → “Program” → “English” → PGVU_TCP.exe
8
PICTROGRAPHY 4000Ⅱ
PGUP.exe
PG4000Ⅱ LUT V300_220 English
PGVU_TCP.exe
PGUP.exe
LUT V300_230 English
PGVU_TCP.exe
PGUP.exe
LUT V300_250 English
PGVU_TCP.exe
PGUP.exe
LUT V300_255 English
PGVU_TCP.exe
PGUP.exe
Firmware LUT V220_220 English
PGVU_TCP.exe
PGUP.exe
LUT V220_230 English
PGVU_TCP.exe
PGUP.exe
LUT V250_255 English
PGVU_TCP.exe
PGUP.exe
Program English
PGVU_TCP.exe
Folder Configuration related to PICTROGRAPHY 4000 Ⅱ
9
Purpose of Installation and Selection of Corresponding File (PICTROGRAPHY 4000 Ⅱ)
Purpose of PICTROGRAPHY
File Selection Method (“XXX” represents folder name.)
Installation Connection Method
Upgrading from Old SCSI Connection “PG4000Ⅱ” → “LUT V300_220” → “English” → PGUP.exe
LUT Ver.2.20 to New
LUT Ver.3.00 PNA Connection “PG4000Ⅱ” → “LUT V300_220” → “English” → PGVU_TCP.exe
Upgrading from Old SCSI Connection “PG4000Ⅱ” → “LUT V300_230” → “English” → PGUP.exe
LUT Ver.2.30 to New
LUT Ver.3.00 PNA Connection “PG4000Ⅱ” → “LUT V300_230” → “English” → PGVU_TCP.exe
Upgrading from Old SCSI Connection “PG4000Ⅱ” → “LUT V300_250” → “English” → PGUP.exe
LUT Ver.2.50 to New
LUT Ver.3.00 PNA Connection “PG4000Ⅱ” → “LUT V300_250” → “English” → PGVU_TCP.exe
Upgrading from Old SCSI Connection “PG4000Ⅱ” → “LUT V300_255” → “English” → PGUP.exe
LUT Ver.2.55 to New
LUT Ver.3.00 PNA Connection “PG4000Ⅱ” → “LUT V300_255” → “English” → PGVU_TCP.exe
10
PICTROGRAPHY 4500
PGUP.exe
PG4500 LUT V200 English
PGVU_TCP.exe
PGUP.exe
Firmware LUT V100 English
PGVU_TCP.exe
PGUP.exe
Program English
PGVU_TCP.exe
Folder Configuration related to PICTROGRAPHY 4500
Purpose of PICTROGRAPHY
File Selection Method (“XXX” represents folder name.)
InstallationI Connection Method
Upgrading to New SCSI Connection “PG4500” → “LUT V200” → “English” → PGUP.exe
LUT Ver.2.00
PNA Connection “PG4500” → “LUT V200” → “English” → PGVU_TCP.exe
Returning to Old SCSI Connection “PG4500” → “Firmware” → “LUT V100” → “English” → PGUP.exe
LUT Ver.1.00
PNA Connection “PG4500” → “Firmware” → “LUT V100” → “English” → PGVU_TCP.exe
Upgrading system SCSI Connection “PG4500” → “Firmware” → “Program” → “English” → PGUP.exe
software
PNA Connection “PG4500” → “Firmware” → “Program” → “English” → PGVU_TCP.exe
PICTROGRAPHY 4500N
PGVUEN.exe
PG4500N LUT V200 English
PGVUEN.exe
Firmware LUT V100 English
PGVUEN.exe
Program English
Folder Configuration related to PICTROGRAPHY 4500N
11
Macintosh
PICTROGRAPHY 3500
PGUP
PG3500 LUT V200 English
PICTRO Upgrade (AT)
PGUP
Firmware LUT V102 English
PICTRO Upgrade (AT)
PGUP
LUT V104 English
PICTRO Upgrade (AT)
PGUP
LUT V105 English
PICTRO Upgrade (AT)
PGUP
Program English
PICTRO Upgrade (AT)
12
Purpose of Installation and Selection of Corresponding File (PICTROGRAPHY 3500)
OS for PICTROGRAPHY
Purpose of
Host Connection File Selection Method (“XXX” represents folder name.)
Installation
Computer Method
Upgrading to New Mac OS SCSI Connection “PG3500” → “LUT V200” → “English” → PGUP
LUT Ver.2.00
PNA Connection “PG3500” → “LUT V200” → “English” → PICTRO Upgrade(AT)
Mac OSX SCSI Connection “PG3500” → “LUT V200” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG3500” → “LUT V200” → “MacOSX” → PICTRO Upgrade(AT)
Returning to Old Mac OS SCSI Connection “PG3500” → “Firmware” → “LUT V102” → “English” → PGUP
LUT Ver.1.02
PNA Connection “PG3500” → “Firmware” → “LUT V102” → “English” → PICTRO Upgrade(AT)
Mac OSX SCSI Connection “PG3500” → “Firmware” → “LUT V102” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG3500” → “Firmware” → “LUT V102” → “MacOSX” → PICTRO Upgrade(AT)
Returning to Old Mac OS SCSI Connection “PG3500” → “Firmware” → “LUT V104” → “English” → PGUP
LUT Ver.1.04
PNA Connection “PG3500” → “Firmware” → “LUT V104” → “English” → PICTRO Upgrade(AT)
Mac OSX SCSI Connection “PG3500” → “Firmware” → “LUT V104” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG3500” → “Firmware” → “LUT V104” → “MacOSX” → PICTRO Upgrade(AT)
Returning to Old Mac OS SCSI Connection “PG3500” → “Firmware” → “LUT V105” → “English” → PGUP
LUT Ver.1.05
PNA Connection “PG3500” → “Firmware” → “LUT V105” → “English” → PICTRO Upgrade(AT)
Mac OSX SCSI Connection “PG3500” → “Firmware” → “LUT V105” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG3500” → “Firmware” → “LUT V105” → “MacOSX” → PICTRO Upgrade(AT)
Upgrading system Mac OS SCSI Connection “PG3500” → “Firmware” → “Program” → “English” → PGUP
software
PNA Connection “PG3500” → “Firmware” → “Program” → “English” → PICTRO Upgrade(AT)
Mac OSX SCSI Connection “PG3500” → “Firmware” → “Program” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG3500” → “Firmware” → “Program” → “MacOSX” → PICTRO Upgrade(AT)
13
PICTROGRAPHY 4000Ⅱ
PGUP
PG4000Ⅱ LUT V300_220 English
PICTRO Upgrade (AT)
PGUP
LUT V300_230 English
PICTRO Upgrade (AT)
PGUP
LUT V300_250 English
PICTRO Upgrade (AT)
PGUP
LUT V300_255 English
PICTRO Upgrade (AT)
PGUP
Firmware LUT V220_220 English
PICTRO Upgrade (AT)
PGUP
LUT V220_230 English
PICTRO Upgrade (AT)
PGUP
LUT V250_255 English
PICTRO Upgrade (AT)
PGUP
Program English
PICTRO Upgrade (AT)
14
Purpose of Installation and Selection of Corresponding File (PICTROGRAPHY 4000 Ⅱ)
OS for PICTROGRAPHY
Purpose of
Host Connection File Selection Method (“XXX” represents folder name.)
Installation
Computer Method
Upgrading from Old LUT Mac OS SCSI Connection “PG4000Ⅱ” → “LUT V300_200” → “English” → PGUP
Ver.2.20 to New LUT
PNA Connection “PG4000Ⅱ” → “LUT V300_200” → “English” → PICTRO Upgrade(AT)
Ver.3.00
Mac OSX SCSI Connection “PG4000Ⅱ” → “LUT V300_200” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG4000Ⅱ” → “LUT V300_200” → “MacOSX” → PICTRO Upgrade(AT)
Upgrading from Old LUT Mac OS SCSI Connection “PG4000Ⅱ” → “LUT V300_230” → “English” → PGUP
Ver.2.30 to New LUT
PNA Connection “PG4000Ⅱ” → “LUT V300_230” → “English” → PICTRO Upgrade(AT)
Ver.3.00
Mac OSX SCSI Connection “PG4000Ⅱ” → “LUT V300_230” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG4000Ⅱ” → “LUT V300_230” → “MacOSX” → PICTRO Upgrade(AT)
Upgrading from Old LUT Mac OS SCSI Connection “PG4000Ⅱ” → “LUT V300_250” → “English” → PGUP
Ver.2.50 to New LUT
PNA Connection “PG4000Ⅱ” → “LUT V300_250” → “English” → PICTRO Upgrade(AT)
Ver.3.00
Mac OSX SCSI Connection “PG4000Ⅱ” → “LUT V300_250” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG4000Ⅱ” → “LUT V300_250” → “MacOSX” → PICTRO Upgrade(AT)
Upgrading from Old LUT Mac OS SCSI Connection “PG4000Ⅱ” → “LUT V300_255” → “English” → PGUP
Ver.2.55 to New LUT
PNA Connection “PG4000Ⅱ” → “LUT V300_255” → “English” → PICTRO Upgrade(AT)
Ver.3.00
Mac OSX SCSI Connection “PG4000Ⅱ” → “LUT V300_255” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG4000Ⅱ” → “LUT V300_255” → “MacOSX” → PICTRO Upgrade(AT)
Returning to Old LUT Mac OS SCSI Connection “PG4000Ⅱ” → “Firmware” → “LUT V220_220” → “English” → PGUP
Ver.2.20
PNA Connection “PG4000Ⅱ” → “Firmware” → “LUT V220_220” → “English” → PICTRO Upgrade(AT)
Mac OSX SCSI Connection “PG4000Ⅱ” → “Firmware” → “LUT V220_220” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG4000Ⅱ” → “Firmwar” → “LUT V220_220” → “MacOSX” → PICTRO Upgrade(AT)
Returning to Old LUT Mac OS SCSI Connection “PG4000Ⅱ” → “Firmware” → “LUT V220_230” → “English” → PGUP
Ver.2.30
PNA Connection “PG4000Ⅱ” → “Firmware” → “LUT V220_230” → “English” → PICTRO Upgrade(AT)
Mac OSX SCSI Connection “PG4000Ⅱ” → “Firmware” → “LUT V220_230” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG4000Ⅱ” → “Firmware” → “LUT V220_230” → “MacOSX” → PICTRO Upgrade(AT)
Returning to Old LUT Mac OS SCSI Connection “PG4000Ⅱ” → “Firmware” → “LUT V250_255” → “English” → PGUP
Ver.2.50 or Ver.2.55
PNA Connection “PG4000Ⅱ” → “Firmware” → “LUT V250_255” → “English” → PICTRO Upgrade(AT)
Mac OSX SCSI Connection “PG4000Ⅱ” → “Firmware” → “LUT V250_255” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG4000Ⅱ” → “Firmware” → “LUT V250_255” → “MacOSX” → PICTRO Upgrade(AT)
Upgrading system Mac OS SCSI Connection “PG4000Ⅱ” → “Firmware” → “Program” → “English” → PGUP
software
PNA Connection “PG4000Ⅱ” → “Firmware” → “Program” → “English” → PICTRO Upgrade(AT)
Mac OSX SCSI Connection “PG4000Ⅱ” → “Firmware” → “Program” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG4000Ⅱ” → “Firmware” → “Program” → “MacOSX” → PICTRO Upgrade(AT)
15
PICTROGRAPHY 4500
PGUP
PG4500 LUT V200 English
PICTRO Upgrade (AT)
PGUP
Firmware LUT V100 English
PICTRO Upgrade (AT)
PGUP
Program English
PICTRO Upgrade (AT)
OS for PICTROGRAPHY
Purpose of
Host Connection File Selection Method (“XXX” represents folder name.)
Installation
Computer Method
Upgrading to New Mac OS SCSI Connection “PG4500” → “LUT V200” → “English” → PGUP
LUT Ver.2.00
PNA Connection “PG4500” → “LUT V200” → “English” → PICTRO Upgrade(AT)
Mac OSX SCSI Connection “PG4500” → “LUT V200” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG4500” → “LUT V200” → “MacOSX” → PICTRO Upgrade(AT)
Returning to Old Mac OS SCSI Connection “PG4500” → “Firmware” → “LUT V100” → “English” → PGUP
LUT Ver.1.00
PNA Connection “PG4500” → “Firmware” → “LUT V100” → “English” → PICTRO Upgrade(AT)
Mac OSX SCSI Connection “PG4500” → “Firmware” → “LUT V100” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG4500” → “Firmware” → “LUT V100” → “MacOSX” → PICTRO Upgrade(AT)
Upgrading system Mac OS SCSI Connection “PG4500” → “Firmware” → “Program” → “English” → PGUP
software
PNA Connection “PG4500” → “Firmware” → “Program” → “English” → PICTRO Upgrade(AT)
Mac OSX SCSI Connection “PG4500” → “Firmware” → “Program” → “MacOSX” → PICTRO Upgrade(SCSI)
PNA Connection “PG4500” → “Firmware” → “Program” → “MacOSX” → PICTRO Upgrade(AT)
16
PICTROGRAPHY 4500N
17
2.2 Internal LUT Version Upgrading Procedure
The internal LUT can be upgraded using the version upgrading utility on the host computer
(Windows or Macintosh) connected to the PICTROGRAPHY 3500 / 4000Ⅱ / 4500 / 4500N.
18
Double-click the CD-ROM icon to open
5 the CD-ROM.
19
8 Click the [OK] button.
Installing
• If you click the [Cancel] button, a dialog box appears, asking if you really want to stop version
upgrading.Click the [OK] button to stop or click the [Cancel] button to continue upgrading.
• If an error occurs, an error message dialog box appears. Confirm the error cause and perform ver-
sion upgrade again.
20
9 Click the [OK] button.
Note :
• Do not execute multiple [PGUP.exe] files
at the same time.
• Do not drag a dialog during version
upgrade.
21
2.2.2 Windows + PNA Connection (PICTROGRAPHY 3500 / 4000Ⅱ/ 4500)
22
Double-click the CD-ROM icon to open
5 the CD-ROM.
23
8 Enter the IP address of the PNA and then
click the [OK] button.
Installing
• If you click the [Cancel] button, a dialog box appears, asking if you really want to stop version
upgrading. Click the [OK] button to stop or click the [Cancel] button to continue upgrading.
• If an error occurs, an error message dialog box appears. Confirm the error cause and perform ver-
sion upgrade again.
24
Error Message Cause
• Defective communications.
PICTROGRAPHY not found. • PNA is not connected.
• Incorrect IP address is entered.
No version updating data available. • No PG program file or LUT file is present in the specified folder.
PICTROGRAPHY not ready. • PICTROGRAPHY is in BUSY.
Insufficient memory. • Host computer has insufficient memory capacity.
File cannot be read correctly. • Abnormal PG program file or LUT file.
A communication error with PICTROG-
• Defective communications.
RAPHY has been detected.
Error detected in PICTROGRAPHY. • Error in PICTROGRAPHY itself.
Note :
• Do not execute multiple [PGVU_TCP.exe]
files at the same time.
• Do not drag a dialog during version
upgrade.
25
2.2.3 MacOS + SCSI Connection (PICTROGRAPHY 3500 / 4000Ⅱ/ 4500)
26
Double-click the CD-ROM icon to open
5 the CD-ROM.
27
8 Click the [OK] button.
Installing
• If you click the [Cancel] button, a dialog box appears, asking if you really want to stop version
upgrading. Click the [OK] button to stop or click the [Cancel] button to continue upgrading.
• If an error occurs, an error message dialog box appears. Confirm the error cause and perform ver-
sion upgrade again.
28
9 Click the [OK] button.
29
2.2.4 MacOS + PNA Connection (PICTROGRAPHY 3500 / 4000Ⅱ/ 4500)
30
• The CD-ROM named “PGSys” is mounted.
31
9 Click the [OK] button.
Current Version
Version After
Installation 10 Click the displayed PNA and then click
the [Next] button.
32
VersionUP
• The LCD screen of the PICTROGRAPHY 3500 /
4000Ⅱ/ 4500 becomes as shown at the left.
Installing
• If you click the [Cancel] button, a dialog box appears, asking if you really want to stop version
upgrading. Click the [OK] button to stop or click the [Cancel] button to continue upgrading.
• If an error occurs, an error message dialog box appears. Confirm the error cause and perform ver-
sion upgrade again.
33
2.2.5 MacOSX + SCSI Connection (PICTROGRAPHY 3500 / 4000Ⅱ/ 4500)
34
Double-click the CD-ROM icon to open
5 the CD-ROM.
Current Version
Version After
Installation 7 Click the [Next] button.
35
8 Click the [Next] button.
Installing
• If you click the [Cancel] button, a dialog box appears, asking if you really want to stop version
upgrading. Click the [OK] button to stop or click the [Cancel] button to continue upgrading.
• If an error occurs, an error message dialog box appears. Confirm the error cause and perform ver-
sion upgrade again.
36
9 Click the [OK] button.
37
2.2.6 MacOSX + PNA Connection (PICTROGRAPHY 3500 / 4000Ⅱ/ 4500)
38
• The “System Preferences” dialog box appears.
39
9 Double-click the CD-ROM icon to open
the CD-ROM.
40
Current Version
Version After
Installation
12 Click the displayed PNA and then click
the [Next] button.
Installing
41
• If you click the [Cancel] button, a dialog box appears, asking if you really want to stop version
upgrading. Click the [OK] button to stop or click the [Cancel] button to continue upgrading.
• If an error occurs, an error message dialog box appears. Confirm the error cause and perform ver-
sion upgrade again.
42
2.2.7 Windows + PICTROGRAPHY 4500N
43
By referring to Subsection 2.1.2, double-
6 click the “PGVUEN.exe” file appropriate
for the purpose of installation.
44
9 Click the [OK] button.
Installing
• If you click the [Cancel] button, a dialog box appears, asking if you really want to stop version
upgrading. Click the [OK] button to stop or click the [Cancel] button to continue upgrading.
• If an error occurs, an error message dialog box appears. Confirm the error cause and perform ver-
sion upgrade again.
45
10 Click the [OK] button.
Note :
• Do not execute multiple [PGVUEN.exe]
files at the same time.
• Do not drag a dialog during version
upgrade.
46
2.2.8 MacOS + PICTROGRAPHY 4500N
47
Check that the PICTROGRAPHY 4500N
6 is in the [Data Ready (except during print
ejection)] state.
48
• A dialog box for printer selection appears.
10
Version After Click the displayed PICTROGRAPHY
Current Version Installation
4500N and then click the [Next] button.
49
VersionUP
• The LCD screen of the PICTROGRAPHY
4500N becomes as shown at the left.
Installing
• If you click the [Cancel] button, a dialog box appears, asking if you really want to stop version
upgrading. Click the [OK] button to stop or click the [Cancel] button to continue upgrading.
• If an error occurs, an error message dialog box appears. Confirm the error cause and perform ver-
sion upgrade again.
50
2.2.9 MacOSX + PICTROGRAPHY 4500N
51
Click the [Network] icon.
4
• The “Network” dialog box appears.
52
By referring to Subsection 2.1.2, dou-
10 ble-click the “PICTRO Upgrade (AT)”
file appropriate for the purpose of
installation.
53
12 Click the displayed PICTROGRAPHY
4500N and then click the [Next] button
Installing
54
• If you click the [Cancel] button, a dialog box appears, asking if you really want to stop version
upgrading. Click the [OK] button to stop or click the [Cancel] button to continue upgrading.
• If an error occurs, an error message dialog box appears. Confirm the error cause and perform ver-
sion upgrade again.
55
2.3 Operation After Version Upgrade
When the LUT or program installation is completed, turn the power switch OFF and ON.
After installing the LUT, perform calibration referring to Chapter 4 (PICTROGRAPHY 4000Ⅱ/ 4500 /
4500N) or Chapter 5 (PICTROGRAPHY 3500) of the Instruction Manual.
After program installation, a “Service” error may appear on the LCD. If this happens, turn the power
switch OFF and ON again, and then perform calibration.
56
3 Plug-in LUT Operating Procedure (PICTROGRAPHY 3000 / 4000 / PICTROSTAT DIGITAL 400)
• The LUT setting function is available for the following versions of Photoshop Plug-in.
3.1.1 Windows
57
2 Click the [Load] button to specify the
LUT for new donor.
PG4000ON1.PGLut
PG4000 Plug-inLUT
PG4000ON2.PGLut
PG4000ON3.PGLut
PSD400ON1.PGLut
PSD400 Plug-inLUT
PSD400ON2.PGLut
58
3.1.2 MacOSX
59
Select the appropriate LUT referring to
<LUT Locations in the CD-ROM>
the figure shown at the left.
PG3000
PG3000 Plug-inLUT MacOS
PG3000
MacOSX
PG4000ON1
PG4000 Plug-inLUT MacOS
PG4000ON2
PG4000ON1
MacOSX
PG4000ON2
PG4000ON3
PSD400ON1
PSD400 Plug-inLUT MacOS
PSD400ON2
60
3.2 Functions on the “LUT Settings” Screen
3.2.1 Windows
• Gray Scale
If the “RGB Separated” option is unchecked,
the gray scale displayed above the graphic
area will show the result of the RGB input
value from 0% to 100%. If the “RGB Sepa-
rated” option is checked, the gray scale will
only show as the selected RGB tone curve.
For example, an increase in the value of an
R fiducial point will result in more red color.
61
• [Reset] Button
By clicking on the [Reset] button, the tone
curve will be reset to the default value. If
the “RGB Separated” option is checked,
only the selected tone curve will be reset to
the default value.
• [Save] Button
By clicking on the “Save” button, current
LUT settings can be saved as a file.
• [Load] Button
By clicking on the [Load] button, the
desired Plug-in LUT settings file can be
loaded.
62
3.2.2 MacOSX
• Gray Scale
If the “RGB Separated” option is unchecked,
the gray scale displayed above the graphic
area will show the result of the RGB input
value from 0% to 100%. If the “RGB Sepa-
rated” option is checked, the gray scale will
only show as the selected RGB tone curve.
For example, an increase in the value of an
R control fiducial will result in more red
color.
63
• [Reset] Button
By clicking on the [Reset] button, the tone
curve will be reset to the default value. If
the “RGB Separated” option is checked,
only the selected tone curve will be reset to
the default value.
• [Save] Button
By clicking on the “Save” button, current
LUT settings can be saved as a file.
• [Load] Button
By clicking on the [Load] button, the
desired Plug-in LUT settings file can be
loaded.
64
FAX ; 81-3-5484-0454
Name :
E-mail Address :
Question 2 • Have you found any technical errors, errors in spelling, or missing words in this manual?
Yes No
• If you have ticked (Yes), please let us know what these errors and missing words are.
Question 3 • How would you rate the writing (language, choice of words/phrases, etc.) and the illustrations/
diagrams, etc.?
(1) Clear and easy to follow (2) Should be simplified
(3) Difficult to follow
(1)’ [Illustrations, etc.] Of adequate size
(2)’ [Illustrations, etc.] Too small
(3)’ [Illustrations, etc.] Difficult to follow
• If you have ticked (2), (3) or (3)’, please give us your reasons.
Additional
Comments/
Requests
concerning
This Manual