Escolar Documentos
Profissional Documentos
Cultura Documentos
Specifications :
Alternate High/Low Ribbed Construction.
Easy to Cut Pads can be cut to be slightly larger than the size of the leg or machine, using shears or
knife.
Easy Field Installation
Multiple layers of Ribbed Mounting Pad can be used to increase deflection.
Model Size
Load (LBS) Load (Kg)
No. Inches
EFRMP381818 3/8" x 18" x 18" 12960 5878
EFRMP381212 3/8" x 12" x 12" 5760 2612
EFRMP380808 3/8" x 8" x 8" 2560 1161
EFRMP380606 3/8" x 6" x 6" 1440 653
EFRMP380404 3/8" x 4" x 4" 640 290
EFRMP380303 3/8" x 3" x 3" 360 163
Ribbed Mounting Pads
Specifications :
Cork sandwich Pads are laminated pads having 1/2" thick close grained cork securely bonded
between two layers of 1/4" alternate low high ribbed Neoprene rubber pads.
Offers highest level of sound attenuation and vibration isolation.
No need for bolting.
Model Size
Load (LBS) Load (Kg)
No. Inches
EFCSP781818 7/8" x 18" x 18" 16200 7348
EFCSP781212 7/8" x 12" x 12" 7200 3265
EFCSP780808 7/8" x 8" x 8" 3200 1451
EFCSP780606 7/8" x 6" x 6" 1000 454
EFCSP780404 7/8" x 4" x 4" 860 390
EFCSP780303 7/8" x 3" x 3" 450 204
Cork Sandwich Pads
Specifications :
Metal Sandwich Pads are constructed of a steel plate bonded between Ribbed Anti Vibration Pads.
Designed for very high load capacity.
Model Size
Load (LBS) Load (Kg)
No. Inches
EFMSP011818 1" x 18" x 18" 32400 14696
EFMSP011212 1" x 12" x 12" 14400 6531
EFMSP010808 1" x 8" x 8" 6400 2902
EFMSP340606 3/4" x 6" x 6" 3600 1632
EFMSP340404 3/4" x 4" x 4" 1600 725
EFMSP340303 3/4" x 3" x 3" 900 408
Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
To achieve good sound suppression do not over load fitting.
Rubber Pads
Selection Procedure :
Compute the total load in kg. to be supported by Easyflex Pads. This includes machine weight and work
load it carries and also concrete or steel base or inertia block if used.
Determine unit loading to suit type of machine and supporting ground structure 23 kg. per square inch
is practical and effective loading and is recommended for most type of machines and equipment for
isolation of sustained vibration.
Divide the static weight by unit load to get total area of Easyflex Pad that is required.
Arrange the total area of into adequate number of pads that are necessary to give stable support and to
avoid base distortion. The area of each pad should be in proportion to the load carried by it so that the
unit loading or stress on all pads will be approximately the same.
The pads should be placed in such way that uniform deflection is obtained. Uniform load distribution
prevents over loading and possible premature failure of some of the mountings, prevents sagging and
enables the machine to maintain the normal horizontal position and make maximum isolation
possible.
Features :
Scientifically designed resilient material that isolates shock and all the six modes of Vibration and
reduce acoustic noise.
They give more deflection than any other material i.e. cork, felt etc.
They are cheaper than metal springs and have greater sound insulation ability.
They are highly resistant to oil, cleaning compounds, dirt, water, strength, heat aging and fatigue.
These are mostly used for machine tools, production equipments, heating and ventilation equipments,
pumps, generators, compressors, air handling units, fans, under heavy concrete bases, electronics or
sensitive laboratory apparatus, business machines, computers and data processor etc.
Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
Technical Specifications
Other VI Pad sizes which are not our standard sizes (as mentioned above) would be specially manufactured as
per client requirement. The Shore hardness ‘A’ can be altered as per customer requirement to suit duty condition.
Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
Technical Specifications
DEFLECTION IN INCHES
EFRP-101-A
EFRP-102-B
EFRP-103-C
EFRP-104-D
Waffle Pad
Models :
Natural Rubber for maximum resilience and vibration isolation. Contains anti-oxidants and anti-
ozonants to improve aging.
Standard Neoprene for longer life and moderate oil resistance.
CALCULATION
EFWP Pads should be used in full squares. Select the minimum number of squares required and design pad
to the most convenient square or rectangle. The use of additional squares results in more conservative
loading.
Due to policy of continual improvement, the specifications are subject to change without prior notice.
Measurements are subject to 5% tolerance.
To achieve good sound suppression do not over load fitting.